Hi everybody..
I try to develope an Application with .NET C# 2.0, which uses a SQL Express Edition Database. As you know, I can give the SQL Server a password an username (or Windows auth.).
Wenn the user has already installed SQL eXpress Edition, he can access to database and change the data manual.
Is there anyway to set password to a database in SQL Server (Express)?
Thanks..
Hi
I have problems to find the Reporting Services in the MSSQL Server Express adv. Services. Is it because I have onlx the Windows Home installed? And the IIS is missing?
I hope not!
I also work with C# Express and now I really need to produce some reports and graphics...
Greetings from Germany,
Quattrus
Hi All,
What are the points needed to be taken care of before starting develop an application that uses sql express as a local database. For example is there a need for an early configuration to make all end users (after the installing app from a cd to their own machines) of the application to connect to the database that I am designing. I saw many posts related to this issue but none of them describes the process step by step. So if an experienced guy/girl outlines the steps I would be delightful.
Thanks in advance.
Hi folks
I have a 64 bit Vista Home Premium PC SP1.
I downloaded and attempted to install the 64 bit version of SQL Express and I then got an error message to do with the ASP.NET Version registration requirement.
I then noticed a similar problem somebody else had & they solved it by doing the install/download as part of the Visual web Developer Expr installation - so I did the same. It seemed to work without any problems.
I had previously downloaded the 64 bit Management Studio Expr file, so after installing SQL server I attempted to install the management Studio program. Anyhow after starting the install program, I discovered that the instructions were either in Japanese or Chinese.
On the download page for SQL Server Express http://www.microsoft.com/express/sql/download/default.aspx, Under section 3 on the RHS it talks about Advanced Services & the Toolkit. Presumably, those downloads are for the 32 bit version, so is it possible to get a 64 bit version of Reporting Services & full-text search & the toolkit?
Anyway, if somebody could give me a bit of a clue I would really appreciate it.
Kind regards
Ross
hi,
i am new to programming...
when i do a project in MS Access , i have the option of password , which doesnot allows unautorized users to see the database design..
But in SQL server 2000 , is there any option to set password for the database...???
Thanks in advance....
Hi
I want to protech a particular database in SQL server with Password.
Can it Possible..
Thanks
ASM
I created a sql database with no password and now want to add one. Does anyone know how I can do this ?
TIA
I am creating a new application and just created a new database
Application: VB.net 2005/ ASP.net
Database: Sql Server 2005 with four tables
I need to set the userid and password on the database. How do I do that?
I want to be able to create a SQL connection object in my code and I have something like the following:
<CODE>
Dim objcon As New SqlConnection("server=serverName;uid=;pwd=;database=SomeDatabase")
</CODE>
but the "uid" and the "pwd" are not set on my database. what is an easy way to do this? thanks
Hi all,
Is it possible to recover or find the password of database or resetting is the only option? I have a database that has a two users in the Users tab. How to find out the password for these?
Thanks,
I have a SQL database hosted on a server. This server supports SQL Sever 2000. How do I change the password to the password?Thanks in advance,
View 1 Replies View RelatedI have a database installed on my server, and i have put a database on user "sa" , so when any user wants to view the database he must enter the password to view its content. But i have dicover that if the user make the authentication "Windows Authentication" and opened the database it will be opned without the need to enter the password !!! and for this i cant restrict the access for my database from un-authorized people.
Can any one tell me how i can restrict view database content unless entering the password?
Thaks
I have tried every SA password in our documentation and I cannot get into the database. I want to dump the database and clear up the transaction log. Can anyone help me?
View 1 Replies View RelatedI Forgot for my longtime used home expense update application password which has backend sql expressedition database.
i was used the application before 3 years, unfortunately i stopped updating my home expendature to the software.and now i require to login the application but i dont how reset the password in db, i have open database include tables of users profile. and password, but its encrypted.
how to make my sqlserver 2005 database password protected.i make a database and i want to make a password protected.
View 4 Replies View RelatedHi,When I create a new database from Enterprise Manager (right click ondatabases > New Database) I noticed that I am not prompted to create apassword or user name. Can I take it then that all databases under thesame local group will have the same password and user name?I have tied to access the newly created database using the samepassword and username but haven't had any luck.Thanks
View 3 Replies View RelatedHi..
I try to develope an Application with .NET C# 2.0, which uses a SQL Express Edition Database. As you know, I can give the SQL Server a password an username (or Windows auth.).
Wenn the user has already installed SQL eXpress Edition, he can access to database and change the data manual.
Is there anyway to set password to a database in SQL Server (Express)?
Thanks..
I want to allow access to a database from another computer via tcp/ip connection.
When i use Windows authentication, this works if access from the same Windows account name; it is not necessary to supply any UserID or something else. But how to authorize access from another windows user account?
When i don't use Windows authentication ( SqlConnectionStringBuilder.IntegratedSecurity=false in C#) i never succeed to access to the database even on the pc where the database is. I created a login+password+user using code like
command.CommandText = String.Format( "CREATE LOGIN {0} WITH PASSWORD='{1}';", login, password );
command.ExecuteNonQuery();
command.CommandText = String.Format( "CREATE USER {0} FOR LOGIN {1};", userName, login );
command.ExecuteNonQuery();
but how to use these Login, user, password ? What i'd like to do is simple: allow access to my DB by supplying a Name and a Password.
I use VS express2014, C#, .net 4.x and VS CE 2013, Windows 8.1&7
I want only SQL Server Authentication not Windows Authentication Because If some one copy database and attach at some other place using Windows Authentication then they can see each and everything.
I want something like Access (I know its password can be broken very easily)
I want to protect Table & SP Schema, Data is not much important.
Its urgent
I know user can add password to a sdf database when create it .
But is there a way to add password to a existed database file ?
Thanks.
hi
i have installed the .net C# 2005 it include the sql express but when i am creating a database in window authoncation it create sucessfully but when i am creating using uid and password it will not accept why ?
any one tell me??????????
I have connected to Database using my credentials by checking remember password option. After few days I forgot my password. How can I recover the password as SQL remember it. Is there any way to recover my password instead of resetting it.
View 3 Replies View RelatedI have a package protected by a password - I am already unhappy that to get it to use the configuration file to change connection strings for the production servers I have had to hardcode the password into the config file - very insecure!
However, the package now deploys correctly to the production server and will run from there OK, but NOT if scheduled as a SQL Server Agent Job. Thus is because however often I edit the command line to include the password after the DECRYPT switch (which it has prompted me for when I click on the command line tab), the Job Step will not retain it.
If I open it up after I have edited it and closed it, the password has disappeared.
I know that if I run dtexec plus the code in the Command Line tab (with the password), the package runs OK.
This is driving me insane!
I have read all the other posts and so I tried replacing the SSIS package step with a CmdExec step and pasting that code into there - then I get an OLEDB error..
The code I use is:
DTEXEC /SQL "ImportRateMonitoringTables" /SERVER servername /DECRYPT password /CONFIGFILE "D:Microsoft SQL ServerSSISDeploymentsRateMonitoringImportTasksDeploymentImportRateMonitoringTables_Production.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
and I get
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF
although the same code executes perfectly from a command prompt.
Please does anyone have any experience with a similar problem and if so, how did you get round it?
Thank you
that sounds obvious but I'm stuck...
I have an ASP.net application which someone else started and I continue.
on the SQL server there was a user X which was used to access the database from the ASP website.
I accidently changed the password in the SQL server and now I cant restore the prior settings
(trying to reset password to blank or embedding the username and password in the connection string didnt work).
it stops on "connection.open" with - "SQLException Login failed for user 'X'"
any ideas why that happens and how I can fix it?
thanks
Hello!
I can't figure it out how to create a database with an username and a password. I'm using Visual Studio 2005 and Microsoft SQL Server 2005.
Can someone help me out?
Greetings,Persyn Bert.
Hi everyone,
I am currently reading ASP.NET unleashed and practising few examples. The following code converts a user's text into a symmetric encryption:
'nd: define keys
Const DESKey As String = "ABCDEFGH"
Const DESIV As String = "HGFEDCBA"
'nd: convert string to byte array
Function convert2ByteArray(ByVal strInput As String) As Byte()
Dim intCounter As Integer
Dim arrChar As Char()
arrChar = strInput.ToCharArray
Dim arrByte(arrChar.Length - 1) As Byte
For intCounter = 0 To arrByte.Length - 1
arrByte(intCounter) = Convert.ToByte(arrChar(intCounter))
Next
Return arrByte
End Function
Private Sub btnGo_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnGo.Click
Dim arrDESKey As Byte()
Dim arrDESIV As Byte()
Dim arrInput As Byte()
Dim objFileStream As FileStream
Dim objDES As DESCryptoServiceProvider
Dim objEncryptor As ICryptoTransform
Dim objCryptoStream As CryptoStream
'convert string to bytes
arrDESKey = convert2ByteArray(DESKey)
arrDESIV = convert2ByteArray(DESIV)
arrInput = convert2ByteArray(txtInput.Text)
objDES = New DESCryptoServiceProvider
'pass keys
objEncryptor = objDES.CreateEncryptor(arrDESKey, arrDESIV)
'create to file to save password
objFileStream = New FileStream(MapPath("secret.txt"), FileMode.Create, FileAccess.Write)
'pass in file and keys
objCryptoStream = New CryptoStream(objFileStream, objEncryptor, CryptoStreamMode.Write)
'pass in text
objCryptoStream.Write(arrInput, 0, arrInput.Length)
objCryptoStream.Close()
lblDone.Text = "Done!"
End Sub
It works fine. But, how to i save this encrypted password into a database field instead of a writing it to a file? Also, could some please tell me how to paste code into this forum? I tried <code></code> tags but it did not work.
Many thanks,
Kevin
Hi, I'm using the SQL Server Everywhere CTP on the desktop and haven't used SQL Server Mobile in the past.
I'm having some difficulty determining whether it's possible to change a SQL Server Everywhere database's password. Obviously authentication on a file-based SQL Server Everywhere database differs from that of server-based SQL Server database. Is it possible to change a SQL Server Everywhere database's password?
That said, I feel like I've made a decent search of the to change a SQL Server Everywhere books online. If it's not possible to change the password in place (i.e., without copying all data to a new file with a different password), please count this as a vote to add that functionality. Making a database password "permanent" lessens its effectiveness. Thanks,
Curt
Hi,
I am using the sql server for creating the database. I want to create the database which is having userid and password. This I require since I wanted to restrict acces to database and also only authorise user to database can use the userid and password created at time of creation of database.
So how can I create the database which is having userid and password?
We are implementing PCI (Payment Card Industry) and one thing that is required is that we change our encryption keys once a year or when a key custodian leaves. The only way that I have seen to do that is to decrypt all the encrypted data, drop and recreate the symmetric key, the certificate, and database master key, and then re-encrypt the data.
Is there any way to just change the password on the database master key? I understand that if the actual symmetric keys have been breached, that would not be enough, but for routine maintenance, just changing the password on the database master key would seem to be enough.
I have looked and looked, but have not found anyone else that is doing this type of thing. Maybe I am just not looking in the right places. Can anyone offer some guidance? Thank!!!
Jim Youmans
I've learn DotNetNuke.I don't know how to create passID and userID for database sqlserver2005 express.someone help me.Thanks!thanks!
View 4 Replies View RelatedI am receiving the following error message when attempting to create a new SQL Authenticated login id.
Password validation failed. The password does not meet the requirements of the password filter DLL. (Microsoft SQL Server, Error: 15119)
I have four servers all running SQL Server 2005 SP2 on Windows 2003 Ent. SP1. Of the four servers, only one received the above error message using the same TSQL below.
CREATE LOGIN TEST_LOGIN WITH PASSWORD = 'pvif9dal' MUST_CHANGE, CHECK_EXPIRATION = ON
All four servers are in the same domain, which if I understand correctly, the password policies are therefore inherited at the OS level by the domain. The password being used is within the password policies of the domain.
Any ideas as to a root cause?
Hi,
Is there any way of decrypting password value stored in sysxlogins table of SQL database?
Thx in Adv
I am not able to connect to database through username and password credentials, able to connect with the windows authentication option.
Pleaes guide me how to solve this.
I am required to access the database in the ETL application which should be allowing me to create table through this ETL application. Please help in resolving this.
Thanks in advance
I tried to install an ALLDATA database which run with SQL Server 2005 express edition. The data base fails to install becase of the following code that come up which is related to AS password requirement. The error that come up is:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The sa password must meet SQL Server password policy requirements. For strong password guidelines, see Authentication Mode, in SQL Server Books Online.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=28001&EvtType=sqlca%5csqlcax.cpp%40SAPasswordPolicyCheck%40SAPasswordPolicyCheck%40x6d61
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
I am trying to install this database in a network server operating under Windows Server 2003 R2 with SP2. If anyone knows how to solve this problem, please let me.
Thanks,
Amilcar