When is the planned release of the bootstrapper for click once and other installation programs to deploy SQl Express SP2? We need this in the worst way so we can get receive Vista Certification.
View 4 RepliesHi,
Has anyone out there create a VS bootstrapper package for SQL Express that will allow installation on a 64 bit OS, e.g. Vista x64?
Thanks
Gavin
So, here's my problem..
I've been working on getting SQL 2k5 installed for a few days now. It's been the single most trying installation I've ever attempted. Absolutely riddled with problems.. I've had to do integrate SP2 and XP and reinstall my OS... I've literally lost 15-20 hours of my life to this.
So here's my newest problem.
I've new to the techie world so try and make sense of this. Thanks.
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution.
Unable to load setup helper module : 87
Message displayed to user
Failed to load SqlSpars.dll
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_DSLPTP05_.NET Framework 2.0.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0008.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_DSLPTP05_.NET Framework 2.0 LangPack.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0008.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_DSLPTP05_.NET Framework Upgrade Advisor.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0008.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_DSLPTP05_.NET Framework Upgrade Advisor LangPack.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0008.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_DSLPTP05_.NET Framework Windows Installer.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0008.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_DSLPTP05_.NET Framework Windows Installer LangPack.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0008.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2006/4/29 16:4:46
Message pump returning: 87
The scenario I have is as follows:
Our product ships with a bootstrapper that installs SQL Server 2005 silently for our clients - basically it's a pre-req which we load for them if it's not already installed.
The bootstrapper supplies the service account identity parameters for the SQL Server install command line in English. It supplies the local system account (NT AUTHORITYSYSTEM).
The problem occurs when we tried to install the product onto a French version of XP. We got the error message "SQL Server setup could not validate the service accounts. Either the service accounts have not been provided for all the services being installed, or the specified username or password is incorrect. For each service, specify a valid username, password, and domain, or specify a built-in system account."
Having read the page http://msdn2.microsoft.com/en-us/library/ms143504.aspx#Localized_service_names we have discovered that the system account identity has a different name for French (AUTORITE NTSYSTEM) along with some other languages ... but we're not sure how to resolve the problem.
Can anyone out there tell me whether we ...
1) Can get the machine being installed on to tell us the local system account identity so we can substitute it into our command line in the bootstrapper?
2) Have to write a different bootstrapper for each language that names the local system account identity differently?
3) Have overlooked some other solution?
Also, does anyone know how many languages and which they are that give the local system account a name that's different to "NT AUTHORITYSYSTEM"??
Thanks,
Sara
<EDIT>
Sorry, omitted a vital bit of information. The bootstrapper is written in C++.
We know the .NET code to retrieve an NT account given a well known SID. Can we do the same in C++ somehow??
</EDIT>
I've discovered that on both my desktop and laptop I seem to now be missing the bootstrapper package for SQL CE 3.5
I have a folder at "C:Program FilesMicrosoft SDKsWindowsv6.0ABootstrapperPackagesSQL Server Compact Edition" but the only thing in it is "ENssceeula-EN.rtf", no MSI or product.xml.
I have VS2008 installed on both machines.
Can I use "SSCERuntime-ENU.msi" from http://download.microsoft.com/download/b/8/5/b85fb87c-2f67-46c2-a475-0ded755f2e76/SSCERuntime-ENU.msi as a bootstrapper package, and if so, where can I find the appropriate product.xml values for InstallChecks etc?
Is there a way to make the bootstrapper run a shortcut or the the sqlexpr32.exe with command line parameters? There is no preinstall event and .msi's cannot be nested. Any ideas?
View 1 Replies View Related
Is there a bootstrapper manifest file available for CE 3.5 Beta 2? We need to make a preliminary installation package with our VS 2005 application.
Dave Michel
Hi,
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
Me.myTableTableAdapter.Update(Me.myDatabaseDataSet.myTable)
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
Thanks,
Ieyasu
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies View RelatedThis problem only occurs after deployment, not when debugging. In the table I am having a problem with I have an ID field designated as the primary key with the identity increment set to 1 and the identity seed set to 1. There is no data in the table when deployed. I can add records to the datagridview control but when I try updating the dataset I get this error indicating that the ID field already has a value of 1 present. If I close the application and re-start it, the exception no longer occurrs when I update the dataset. I am including the code to update the tables incase something is wrong there. Any suggestions?
Private Sub UpdateMemberTable()
Me.Validate()
Me.TblMembersBindingSource.EndEdit()
Me.TblMembersTableAdapter.Update(Me.ChurchFamilyDataSet.tblMembers)
Me.TblMemberDependentsBindingSource.EndEdit()
Me.TblMemberDependentsTableAdapter.Update(Me.ChurchFamilyDataSet.tblMemberDependents)
Me.TblMemberContributionsBindingSource.EndEdit()
Me.TblMemberContributionsTableAdapter.Update(Me.ChurchFamilyDataSet.tblMemberContributions)
End Sub
Hi Guys,
I created a Product database table using Visual Basic 2005 Express and SQL Server 2005 Express. I have just added a new column [Picture] to the database table, which of course, should store an image or picture of a product. I am writing to kindly ask you guys for help .
i) How do I include image files into this column [Picture]?
ii) How do I get this image to display on Visual Basic 2005 Express form, so that when a product is selected the product image is displayed accordingly?
Your help much appreciated. Thanks.
Paul
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
This is what I have done.
1. Installed VB.NET IDE 2008 and SQL Server Compact 2005. IDE requires upgrade of database to 3.0 version which I allowed it to do. After the database was upgraded, I did an amount of coding work in the IDE and then tried to go back to do more database work in SQL. However the database then could not be opened in SQL Server Compact 2005. An error said that because it had been upgraded, it could not be read. It was requiring me to run 'upgrade.exe'. I had no idea what this meant and could find no upgrade available online.
2. Removed VB.NET IDE 2008 and installed 2005 instead. However, the file extension on the SQL Server Compact database is .sdf, but the IDE is requiring a .mdf extension. I have tried everything I can think of to get it to save or to have the desired extension, but I cannot.
Questions:
1. Do SQL Express 2005 and VB Studio Express 2008 work together?
2. If so, how?
It seems as though application each requires a different version of the database. If the database is usable in one, it is not usable in another.
Thanks for the help.
Julie
I have a 2005 Express DB I wish to attach to using the 2005 Mgt Studio Client (Not the express version, but the full blown 2005 Mgt Studio Client from the SQL 2005 Standard Edition Install disk). Can this be done, or can I only use the 2005 Mgt Studio Express Edition Client?
Thanks in advance.
M. Scott Blalock
View 2 Replies View Related
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
View 1 Replies View RelatedHi all,Just wondering if SQL 2005 express edition can be connected remotely. I've set up SQL 2005 Express on a separate machine and am having trouble connecting to it from VWD when creating the websites. Currently I've set up ASP.NET 2.0 Framework on the remote machine with IIS6 using Windows Server 2003 Web Edition. And I am directly editing the website remotely on the server machine from my PC. Could someone please help me in setting up a remote connection from VWD to the SQL Server?I've enabled TCP/IP setting in the SQL Configuration Manager but still getting errors. Could this be an issue with Express Edition? Because if it is I also have a copy of SQL Server 2005 to install. Any direction to resolve in this issue would be greatly appreciated.PS. I'm new to this so pls bear with me. Thanks.
View 1 Replies View RelatedI use Visual Web Developer Express 2005 with SQL Server 2005 Express. With this combination I was able to create a new database.I can add tables, views etc.But no triggers....do you guys have an idea how I can add a new trigger?Please help!
View 1 Replies View RelatedThis is a question about the movie collection starter So here it is:
I am running Vista RC1 (Build 5600) and vb express 2005
I downloaded and install SQL Server Express 2005 Edition SP2 - Since SQL Server Express 2005 Edition SP1 does not work with Vista
But when I try to run the collection app or if I try to download and install the Amazon version I get the following error message:
There was a problem loading data: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be cause by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I need any advice you can give me to solve this problem, how to change the default settings, because I do not know where to start.
Thanks
Hi,
I want to make a component library in Visual Basic.NET and connect to a remote Sql Server. When I create a new DataSet with the wizard, I can only connect to a .mdf file, but not to a Sql Server. With Visual Web Developer I can connect to a Sql server. What is the difference between these enviroments ? How can I do the same with Visual Basic.NET ?
Thanks in advance.
I've downloaded and installed both of these (VWD installs both) and have been trying to run through the walkthrough of setting up a web application which supports membership. However, no matter what I do I invariably get errors like the following:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I'm concerned why VWD and VSQL express versions don't run correctly out of the box (so to speak). I'm not an expert on configuring these services -- but that's the point of offering these tools to hobbyists: So we can learn about how to make some of these great applications using MS tools.
My configuration::
Windows XP SP2 -- clean machine as of about a month ago, never had any dev tools, web servers, or the like on it.
IIS is installed and the service says its running
VSQL and VWD express versions installed (no errors on installation)
SQL server service indicates it is running
.Net 2.0 framework installed (no errors on installation)
Note: I've tried installing on two separate machines. Obviously I'm missing something fundamental.
Would someone please help me go through the million things I [apparently] need to do to configure all these tools so I can get on to actually coding up my first web application? If this is documented somewhere, all I can say is I tried to find it but it certainly wasn't obvious.
Hello..
I've installed Visual Basic 2005 express edition & tried to connect to SQL Server 2005 express edition. I noticed that VB2005 Express Edition doesn't have any OLEDB provider for SQL Server. The only OLEDB Provider is for M.Access. Is this correct? if so, what should i do if i want to connect SQL Server 2005 express edition with VB2005 express edition by using OLEDB connection type?
I really appreciate any respond from you guys.. Thank's and waiting for the good news..
Best regards,
VITRELLE
Currently I have following things installed on my Computer
1. SQL Server Express 2005
2. SQL Server Management Studio Express 2005 CTP
I need to install following things
A. Microsoft SQL Server 2005 Express Edition with Advanced Services
B. Microsoft SQL Server 2005 Express Edition Toolkit
Do I need to uninstall any any of 1 or 2?
What should be my path to upgrade these software.
Hi all,
In my SQL Server Express (that is installed in my Windows XP Pro PC), SQL Server 2005 Network Configuration has Protocols for SQLEXPRESS. I tried to do "Enabling CLR Integration" in my SQL Server Express: (1) If I clicked on "Surface Area Configuration for Services and Connections", I got an error "An exception occurred in SMO while trying to manage a service, (Microsoft.SqlServer.Smo) Additional information: Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). (2) If I clicked on "Surface Area Configuration for Features, I got a different error "Computer localhost does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required computer has the required Windows Management Instrumentation components and then try again. (SQLSAC) Additional Information: An exception occurred in SMO while trying to manage a service. (Microsoft.SqlServer.Smo). Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). Please help and tell me how I should do to get "Enabling CLR Integration" in my SQL Server Express done and how I can create SQLCLR Project in VB 2005 Express.
Thanks in advance,
Scott Chang
Hi all,
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Thanks in advance,
Scott Chang
Hi all,
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area":
(1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the
following: Select Computer
The Surface Area Configuration of this surface area of this computer or a remote computer.
Specify a computer to configure: O Local computer
O Remote computer
Should I choose the "Local computer" or the "Remote computer" option?
(2) Below the "Configure Surface Area for localhost [change computer]",
I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS
|-| Database Engine
Service
I picked => Remote Connection
On the right-hand side, there are: O Local connections only
O Local and remorte connections
O Using TCP/IP
O Using named pipes only
O Using both TCP/IP and named pipes
Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
Thanks in advance,
Scott Chang
I have uninstalled the SQL Server Express Edition that I have installed from the CDs that were given to me during a Chicago Conference when READY TO LAUNCH Visual Studio 2005, SQL SERVER 2005, and Biz Talk 2005.
Then I went to microsoft website: http://msdn.microsoft.com/vstudio/express/sql/register/default.aspx and downloaded and installed the so called Microsoft SQL Server 2005 Express Edition and I got the messages Error that you read below. Then I Uninstalled Microsoft SQL Server 2005 Express Edition and went again to msdn website and downloaded Microsoft SQL Server 2005 Express Edition Advanced Services SP1 and installed it. I got again the same message as below.
MESSAGE:
1. First comes a window with the title: €œsetup.exe €“ Unable to Locate Component€?
And it displays a message:
This application has failed to start because MSTDCPRX.dll was not found.
Re-installing the application may fix this problem.
2. After I click the OK button of this window it comes another window with the title: €œMicrosoft SQL Server 2005 Server Setup€?
And it displays a message: Failed to load SqlSpars.dll
Does anybody can tell what is going on with the 3 times I tried to installed different SQL Server 2005 Express Edition and I get the same message?????
Thanks for your help and support when you have time to respond.
Sincerely,
TonyC
MORE INFORMATION ON THE:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFiles
1. C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core.txt
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 87
Aborting queue processing as nested installer has completed
Message pump returning: 87
2. C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core(Local).txt Running: InvokeSqlSetupDllAction at: 2007/1/20 1:22:8
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution.
Unable to load setup helper module : 87
Message displayed to user
Failed to load SqlSpars.dll
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_.NET Framework 2.0.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0001.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2007/1/20 1:22:17
Message pump returning: 87
3. C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Datastore.xml
<
<S,<Scope Type="SetupStateScope" Id="">
<Property Id="machineName">B3-XP</Property>
<Property Id="logDirectory">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOG</Property>
<Property Id="logSummaryFilename">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt</Property>
<Property Id="logSequenceNumber">1</Property>
<Property Id="primaryLogFiles">{ ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_.NET Framework 2.0.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Support.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core(Local).log"] }</Property>
<Property Id="watsonFailedAction">InvokeSqlSetupDllAction</Property>
<Property Id="watsonFailedActionErrorCode">87</Property>
<Property Id="watsonFailedFunction">sqls::InvokeSqlSetupDllAction::perform</Property>
<Property Id="watsonFailedFunctionErrorCode">87</Property>
<Property Id="watsonSourceFileAndLineNo">setupsqlsetupactions.cpp@1709</Property>
<Property Id="watsonModuleAndVersion">setup.exe@2005.90.3042.0</Property>
<Property Id="watsonMsi">None</Property>
<Property Id="watsonMsiAndVersion">None</Property>
<Property Id="watsonSourceFile">setupsqlsetupactions.cpp</Property>
</<Scope>
Everything was working fine. I have been able to connect using windows authentication. Then, I went into the ODBC manager to add a data source and it failed to connect so I went back into the Server management studio to modify users. After doing this I now get an error when I try to conenct the management studio to the SQL server.
I wasn't modifying the login for my windows account that I normally use, I was modifying a different one, however I now get the message "An error has occured while establishing a connection to the SQL server. This kind of problem can ocure because the default behavior of the server does not support all connection methods" blah blah.
Does anyone know how I can attach to the server? Or, do I need to somehow remove the server and create a new one? How would I do that?
Thanks in advance for any input.
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server
When I try to do it I recive the following message:
____________________________________________________________________________________
System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------
Program Location:
in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
____________________________________________________________________________________
What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
I get an error dialog when I try to create a new SQL database, both via the Add New Item dialog and the property wizard of a new SqlDataSource control. The error is:
Local Database File:
User does not have permission to perform this action.
I've searched for help with this.
I ensured the App_Data folder exists and I added the local ASP.NET account to the group that have R/W access to it (although the RO flag is in an unchangeable tri-state on the folder).
The SQL Server Express error log is clean and indicates full functionality.
Everything is running locally.
No VWD installation errors.
Any ideas?
Thank you!
Hi. I'm trying to get full-text search working on my SQL 2005 Express with Advanced Services and am having problems. I thought that I installed it correctly, and when I look in the services running, I see it SQL Server Fulltext Search(MSSQLSERVER). Also note that I have SQL Server 2005 Standard installed on this same laptop. I don't know if that Full text Search applies to the Standard, Express or both.
What I do see is that if I connect to the database engine named <mylaptop>, I can see the version is 9.0.1399 and I can see the check box to enable full-text indexing in a particular databases properties. When I run SELECT FULLTEXTSERVICEPROPERTY('IsFullTextInstalled'), I get a 1.
However, when I connect to the engine name <mylaptop>SQLExpress, I se the version is 9.0.3042, and I don't see the same check-box to enable full-text indexing. When I run SELECT FULLTEXTSERVICEPROPERTY('IsFullTextInstalled'), I get a 0.
I've never tried this before so I know I'm probably missing something basic. But, I have searched quite a bit and not found my answer. So, I'm looking to you for help.
Thanks in advance.
John.
Hi all,
I want to do SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express and I have read the following articles and books:
(i) Connecting to SQL Express User Instances in Management Studio in http://blogs.msdn.com/sqlexpress/archive/2006/11/22/connecting-to-sql-express-user-insta...
(ii) Managing SQL Server Express with SQL Server 2005 Management Studio Express Edition in http://www.microsoft.com/technet/sql/2005/mgsqlexpwssmse.mspx
(iii) Chapter 16 - Going Beyand Transact-SQL: Using the SQL Common Language Rutime (SQLCLR) in Microsoft SQL Server 2005 Express Edition for Dummies
(iv) Chapter 21 - Working with the Common Language Runtime in Microsft SQL Server 2005 Programming for Dummies
(v) Chapter 4 - Introduction to Common Language Runtime (CLR) Integration in Programming SQL Server 2005 by Bill Hamilton.
I want to create an SQLCLR project "HelloWorld" by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. But I am still not sure how to get it started, because I do not understand the following things:
(1) Pipe Name for a User Instance, (2) Enabling (or Disabling) the CLR by using Transact-SQL, (3) Creating a Transact-SQL script, (4) Creating an Assembly, (5) Creating a backup device, etc. I need to see some simple examples of SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. Please help and tell me where in the websites I can find them.
Thanks in advance,
Scott Chang
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang