I've built a web app using VWDEE. I created my express database in the
app_data directory using VWDEE and everything worked really well.
Then I copied the site into my production directory (same computer) and
setup the site under IIS. Now I cannot connect to the database.
How is one supposed to access a express database created then moved in this way?
Thanks,
String or binary data would be truncated. I get this error when entering data using sql server management studio express.
I am not running a sql to insert or update the table. This is through the EDI.
The data type is varchar(100). I enter one character and it errors on me. So this isn't a string being too long problem.
Any ideas?
How easy it is to deploy a solution that uses SQL Express on Development, but a MS SQL database on the production server (host)I am using the membership provider of ASP.net 2.0 Many thanks.
View 2 Replies View RelatedPer the subject line :Is SQL Server Express designed for production use ?
View 11 Replies View RelatedPer the subject line :
Is SQL Server Express designed for production use?
Q1: Can I just open these protocols I need (see web links below) and then close them down again after SQLCacheDependency has been enabled? Note: The website (asp.net 2.0/SQL server Express) operates OK right now with asp.net - but it does not have SQLCacheDependency enabled.
Problem: When I try to do this I keep on getting this error message:
"An error has occurred when establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections."
None of these 3 commands have worked (all give the same message above):
aspnet_regsql.exe -U user1 -P pwd1 -S server1/SQLEXPRESS -d myDBName -ed aspnet_regsql.exe -E -S server1/SQLEXPRESS -d myDBName -ed aspnet_regsql.exe -E -S .SqlExpress -d myDBName -ed
I am trying to run these commands via a MSTSC connection. Q2: Is that (terminal server) the problem (the "remote connection") complained of above ?
This is the command that worked on my local dev machine:
aspnet_regsql.exe -E -S .SqlExpress -d myDBName -ed
Q3: Must I really go through the procedure "How to: Configure Express to accept remote connections" at:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
I don't really want to have SQL server accepting any connections as the last time it was listening on these ports we had so many attacks being made that it was filling up the logs!
What I can't understand is that every night the database is backed up with the following command line code (operating as a Scheduled Task):
sqlcmd -s server1/SQLEXPRESS -i MW4BAK.SQL -E
Q4: So if the server is happy receiving commands from 'sqlcmd.exe' why does it have such problems with 'aspnet_regsql.exe'
Q5: If I grouped those statements I need to setup SQLCacheDependency under a Scheduled Task would they work (as there would presumably be no remote connection then) or is it something in the nature of the connection established which allows sqlcmd.exe to work but stops aspnet_regsql.exe?
Hi all,
I have a site which used a SQL Express database. On my development machine, it works perfectly. As soon as I move it to the production machine, it doesn't work at all. I am pretty confused by what is going on and I really don't want to install Visual Studio on my production machine just to debug it. I am hoping someone might have an idea what could be happening.
Oh, and I have tried setting Everyone to Full Control on the App_Data directory just to test. Still breaks. Below is my web.config connection string:
<connectionStrings> <add name="database_sqlexpress" connectionString="Data Source=.SQLEXPRESS; AttachDbFilename=|DataDirectory|MyDatabase.mdf; integrated security=true; user instance=true"/></connectionStrings>
How do you apply Service Pack 1 to Sql Server Express 2005?
View 1 Replies View RelatedI have a windows forms application that I would like to put in production on several machines. Each machine will contain it's own data and does not need to be networked.
I can use my local connection right now to access the data, but I would like to change my connection so that it will work when installed on a client's machine.
My Current connection string looks like this:
Data Source=.SQLEXPRESS;AttachDbFilename="C:Documents and SettingsMYNAMEMy DocumentsVisual Studio 2005ProjectsInterimApplicationInterimApplicationInterim.mdf";Integrated Security=True;User Instance=True
I believe I could use something like this:
Dim connectionString as string = "Data Source=" & Environment.GetFolderPath(Environment.SpecialFolder.ProgramFiles) & "/InterimApplication/data/Interim.mdf;Integrated Security=True;User Instance=True"
However, I am not sure. Also, if the client does not install to the default directory, then this may cause the application to not work properly.
Lastly, I am not sure if the client machine needs any additional software on their computer in order for the application to be capable of connecting to the data source.
Any recommendations, ideas, comments, or general help is greatly appreciated.
hi
I am working on webforms i have to insert system date into sql database when a button is clicked.
I have have 3 fields on the webform and a submit button.
I have to insert the date along with the other fileds into the sql database
when I am trying to insert date using getdate() it is getting inserted but not into the same row as that of other fields.
Can you plzzz help me with the code for inserting system data into the database into the same row as that of other fields
myCommand2 = New SqlCommand("Insert into Items(Requestdate) values (getdate()) where Hospital= '" & DropDownList2.SelectedItem.Text & "' ", myConnection)
ra = myCommand2.ExecuteNonQuery()
myConnection.Close()
THE ABOVE CODE GIVES AN SYNTAX ERROR NEAR "WHERE"
please help
you can also post me ur replies on urs_forever_tanya2001@yahoo.co.in
Thanks bye
I am trying to write a query which user be able to enter data after getting message for example:
"Enter Value for Descriptionparam: "
here is my query:
selet * from tablename
where descriotion = @'%descriptionparam%'
How does one enter data into the tables of a new database in the first place? I'm using SQL Server Management Studio Express. I can name the columns, but that seems to be as far as I get. Thanks for any Help.
View 3 Replies View RelatedI was wondering what was the limitations of Sql Server 2005 standard w/ 1 calThis is the version that is given out at the launch events.We are currently developing a site, that will use Sql Databases and was wondering if the version we have now will work.Like we know for a fact that the site will recieve a decent amount of traffic. Is standard limited to certain kind of sites and so forth?Thanks,Cedric
View 1 Replies View RelatedHello,
I have a report that is made out of many subreports.
It takes a long time to produce this report.
Is there a away of knowing and displaying to the user which sub report is produced now?
Is there a way of making status info sent to the UI? Somthing like OnStartPage/OnStartReport (now send status to UI somehow)?
TIA
I S
Hi guys
We are in the processes of finalising or server architecture for our production environment and the proposal that has been put forward is to run the database within SQL Server 2005 which is running in a virtual machine. It is thought (by some) that this provides a very high degree of redundancy as it will use ESX server and will have multiple servers in the farm that it can move to in the event of a server crash (which i admit makes a degree of sense).
I however am worried about performance. I release as soon as you go to virtual you loose some raw power because the box is busy running the virtual but more from the point of view that if we make cretin hardware resources available to the virtual would the server run the same as if it was running on a physical machine of the same specifications. For example, if 4gb ram and x amount of clock cycles where dedicated to the virtual would it preform the same as running it on a physical box 4gb ram and x amount of clock cycles. If the answer is no, any supporting documentation that anyone knows of would be greatly appreciated.
As a side note if it makes any difference the database data files and transaction logs are being sorted in an external SAN and not within the virtual image itself.
Thanks
Anthony
Looking for the best practice to upgrade a soon to expire MSSQL 2005
evaluation server to a standard production server? I understand
the license requirements. I have good backups of the
databases.
Should i just pop in a MVL mssql2005 cd and perform an in place
upgrade? Or completely remove the eval version and install clean?
Will i have to redo any SQL users i have added on this server?
Thanks for any help. If anyone has a link to a KBB article i
would be happy to read that on my own as well, i just havent been able
to locate one.
I'm hoping that someone can help. This is my first time posting and fortunately I can normally find what I need but this time I am stumped.
I have a query that produces a date range. The problem is I want to insert or at lease display the dates between even if they don't show up in table. Here's the problem.
My intial query is
select date_of_call
from call_data
where date_of_call >= '2001-09-01' and date_of_call <= '2001-09-15'
order by date_of_call
Results:
2001-09-03 00:00:00.000
2001-09-07 00:00:00.000
2001-09-10 00:00:00.000
2001-09-13 00:00:00.000
2001-09-13 00:00:00.000
2001-09-13 00:00:00.000
2001-09-13 00:00:00.000
2001-09-13 00:00:00.000
2001-09-14 00:00:00.000
When I do a group by and count it looks like this:
select date_of_call, count(date_of_call) as Count_Date_of_Call
from call_data
where date_of_call >= '2001-09-01' and date_of_call <= '2001-09-15'
group by date_of_call
order by date_of_call
Date_Of_Call, Count_Date_of_Call
2001-09-03 00:00:00.0001
2001-09-07 00:00:00.0001
2001-09-10 00:00:00.0001
2001-09-13 00:00:00.0005
2001-09-14 00:00:00.0001
If you notice out of 15 days it only shows 5 days. I am wondering how I can insert the days missing and insert either null or 0 values in the count column so it would look something like this:
Date_Of_Call, Count_Date_of_Call
2001-09-01 00:00:00.0000
2001-09-02 00:00:00.0000
2001-09-03 00:00:00.0001
2001-09-04 00:00:00.0000
2001-09-05 00:00:00.0000
2001-09-06 00:00:00.0000
2001-09-07 00:00:00.0001
2001-09-08 00:00:00.0000
2001-09-09 00:00:00.0000
2001-09-10 00:00:00.0001
2001-09-11 00:00:00.0000
2001-09-12 00:00:00.0000
2001-09-13 00:00:00.0005
2001-09-14 00:00:00.0001
2001-09-15 00:00:00.0000
Any help would be much appreciates.
I have a sql installation disk that automatically puts in a product key during installation.
We have already used that product key and need to use the disk with a new product key.
When the installation gets to the Registration Information window, the product key is already populated in the field and it does not allow you to change it.
Is there anyway to change it?
Any help will be greatly appreciated.
I have a simple code that uses a the file upload control to read an excel sheet and upload the data into a SQL 2005db.
I'm using Visual Web Developer and Sql's express edition to test it. It works fine when I test. However, when I push it up to the production server and try it via the any other pc it does not. The page loads fine. However, when it starts to upload it errors out.
Any reason why? I've never seen this happen.
Here's the code. Thanks in advance. Protected Sub BtnUpload2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles BtnUpload2.Click
UploadTextDocument()
End Sub
Private Sub UploadTextDocument()
Dim location As String = FileUpload1.PostedFile.FileName.ToString
' Connection String to Excel Workbook
Try
Dim excelConnectionString As String = String.Format("Provider=Microsoft.Jet.OLEDB.4.0;Data Source={0};Extended Properties=Excel 8.0", location)
' Create Connection to Excel Workbook
Using connection As Data.OleDb.OleDbConnection = New Data.OleDb.OleDbConnection(excelConnectionString)
Dim command As Data.OleDb.OleDbCommand = New Data.OleDb.OleDbCommand("Select BuilderID,SeriesID,OptionLevel,CommunityID,PhaseID,PlanID,ElevationID,OptionID,CurrentSalesPrice,LocalComments,Active,DateAdded,DateAvailable,DateInactive,SalesPriceEffective,SalesPriceExpires,PreviousSalesPrice,CutOffNotBefore,CutOffNotAfter FROM [Data$]", connection)
connection.Open()
' Create DbDataReader to Data Worksheet
Using dr As Data.Common.DbDataReader = command.ExecuteReader()
' SQL Server Connection String
Dim connectionString As String = ConfigurationManager.ConnectionStrings("HbAdminMaintenance").ConnectionString
' Bulk Copy to SQL Server
Using bulkCopy As SqlBulkCopy = New SqlBulkCopy(connectionString)
bulkCopy.DestinationTableName = "ExcelData"
bulkCopy.WriteToServer(dr)
End Using
End Using
connection.Close()
End Using
LBError.Text = "The spreadsheet was successfully uploaded."
Catch
LBError.Text = "There was an error. Check the spreadsheet for correct format."
End Try
End Sub
Hi,
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
Me.myTableTableAdapter.Update(Me.myDatabaseDataSet.myTable)
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
Thanks,
Ieyasu
How can I enter NULL manually in one of the rows in Sql Server database. Those rows does not contain any data.
View 3 Replies View RelatedCan someone help me to understand something about SQL Server? I will use Access for comparison.
Suppose you have a SQL Server database and you want users to be able to enter data into the fields just like you could with an Access database and forms. How would you set that up with SQL Server? I have noticed that you can convert an Access database into SQL Server, but you still need to use Access forms to enter data into the tables stored in SQL Server.
What if you wanted to create an SQL Server database from the ground up and set it up for user entry?
What am I missing here?
Hi, there,
We intended to create a report that allows users to enter remarks, comments or additional notes in supporting the report.
Can it be done in SSRS? FYI, we are using SQL Server 2005 Enterprise.
Thank you.
Regards,
Yong Hwee
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies View RelatedThis problem only occurs after deployment, not when debugging. In the table I am having a problem with I have an ID field designated as the primary key with the identity increment set to 1 and the identity seed set to 1. There is no data in the table when deployed. I can add records to the datagridview control but when I try updating the dataset I get this error indicating that the ID field already has a value of 1 present. If I close the application and re-start it, the exception no longer occurrs when I update the dataset. I am including the code to update the tables incase something is wrong there. Any suggestions?
Private Sub UpdateMemberTable()
Me.Validate()
Me.TblMembersBindingSource.EndEdit()
Me.TblMembersTableAdapter.Update(Me.ChurchFamilyDataSet.tblMembers)
Me.TblMemberDependentsBindingSource.EndEdit()
Me.TblMemberDependentsTableAdapter.Update(Me.ChurchFamilyDataSet.tblMemberDependents)
Me.TblMemberContributionsBindingSource.EndEdit()
Me.TblMemberContributionsTableAdapter.Update(Me.ChurchFamilyDataSet.tblMemberContributions)
End Sub
Hi Guys,
I created a Product database table using Visual Basic 2005 Express and SQL Server 2005 Express. I have just added a new column [Picture] to the database table, which of course, should store an image or picture of a product. I am writing to kindly ask you guys for help .
i) How do I include image files into this column [Picture]?
ii) How do I get this image to display on Visual Basic 2005 Express form, so that when a product is selected the product image is displayed accordingly?
Your help much appreciated. Thanks.
Paul
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
Hello experts
I'm trying to enter some data into a table to run some tests. Whenever I open the table, I can enter data into all my fields *except* for the fields that I defined as Binary data types. I've tried to enter 0, 1, true, false... I always get the same error...
"Invalid value for cell...
The changed value in this cell was not recognized as valid.
Error Message: You cannot use the Result pane to set this Field data to values other than NULL"
Any ideas on this? I thought Binary was True or False? Is it the way I'm trying to enter data? I'm not familiar with SQL code and I just need to get a few rows filled up with data so I can test using gridview to pull the data onto a webpage.
Thanks
Hi,I need to set up a generic table in Oracle that allows users to enterdata that can later be retrieved in reports.I was thinking of a 3 column table in this structure:DATE,ITEM,VALUEfiguring that you can store anything in this way because ITEM can beanything and you can have multiple instances of a particular value byhaving a new date.Does that seem reasonable?In any case, what are my user front end options? I was thinking aMicrosoft Access database but its not ideal because not everyone herehas Access?Can you do it with Excel? Or what other options are there as a simpleuser front end to enter the data?Thanks for any advice.Kim
View 1 Replies View RelatedGreetings,
I need to install the SSIS components on the referenced database server. I believe the SSIS components are cluster aware, so I was planning on just doing add/remove and selecting the components. Rather than breaking the cluster apart to patch the components back to SP1, I was thinking of just running the SP2 install right over the top of the running cluster to bring everything up to SP2.
I'm looking for any suggestions/comments on whether this is the proper way to proceed or if I'm going to have a problem.
TIA
Can someone at Microsoft comment on this article, specifically, how it relates to SQL Replication? Will SQL Replication fall into the category of what this article describes, or only the mirroring feature?
View 1 Replies View RelatedDo you know of anyone who is running SQL Server Express in a live production web server?
Thanks
WD
This is what I have done.
1. Installed VB.NET IDE 2008 and SQL Server Compact 2005. IDE requires upgrade of database to 3.0 version which I allowed it to do. After the database was upgraded, I did an amount of coding work in the IDE and then tried to go back to do more database work in SQL. However the database then could not be opened in SQL Server Compact 2005. An error said that because it had been upgraded, it could not be read. It was requiring me to run 'upgrade.exe'. I had no idea what this meant and could find no upgrade available online.
2. Removed VB.NET IDE 2008 and installed 2005 instead. However, the file extension on the SQL Server Compact database is .sdf, but the IDE is requiring a .mdf extension. I have tried everything I can think of to get it to save or to have the desired extension, but I cannot.
Questions:
1. Do SQL Express 2005 and VB Studio Express 2008 work together?
2. If so, how?
It seems as though application each requires a different version of the database. If the database is usable in one, it is not usable in another.
Thanks for the help.
Julie