Hi
I've tried downloading SQL Express 2005 but it will not install properly, stating that it is already installed. I cannot get the SQLExpress Service to start. I keep getting the message (The request failed or the service did not respond in a timely fashion). Can anyone help or point me in the right direction?
Thanks
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
i get the above error when attepting to install reporting services
2006-03-26 20:33:09.42 Server Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
2006-03-26 20:33:09.42 Server (c) 2005 Microsoft Corporation.
2006-03-26 20:33:09.42 Server All rights reserved.
2006-03-26 20:33:09.42 Server Server process ID is 2068.
2006-03-26 20:33:09.42 Server Logging SQL Server messages in file 'd:SQL Server 2005MSSQL.1MSSQLLOGERRORLOG'.
2006-03-26 20:33:09.42 Server This instance of SQL Server last reported using a process ID of 1624 at 3/26/2006 8:32:45 PM (local) 3/26/2006 12:32:45 PM (UTC). This is an informational message only; no user action is required.
2006-03-26 20:33:09.42 Server Registry startup parameters:
2006-03-26 20:33:09.42 Server -d d:SQL Server 2005MSSQL.1MSSQLDATAmaster.mdf
2006-03-26 20:33:09.43 Server -e d:SQL Server 2005MSSQL.1MSSQLLOGERRORLOG
2006-03-26 20:33:09.43 Server -l d:SQL Server 2005MSSQL.1MSSQLDATAmastlog.ldf
2006-03-26 20:33:09.43 Server Command Line Startup Parameters:
2006-03-26 20:33:09.43 Server -m SqlSetup
2006-03-26 20:33:09.43 Server SqlSetup
2006-03-26 20:33:09.43 Server -Q
2006-03-26 20:33:09.43 Server -q SQL_Latin1_General_CP1_CI_AS
2006-03-26 20:33:09.43 Server -T 4022
2006-03-26 20:33:09.43 Server -T 3659
2006-03-26 20:33:09.43 Server -T 3610
2006-03-26 20:33:09.43 Server -T 4010
2006-03-26 20:33:09.43 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2006-03-26 20:33:09.43 Server Detected 1 CPUs. This is an informational message; no user action is required.
2006-03-26 20:33:09.51 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2006-03-26 20:33:09.53 Server Database Mirroring Transport is disabled in the endpoint configuration.
2006-03-26 20:33:09.53 spid5s Warning ******************
2006-03-26 20:33:09.53 spid5s SQL Server started in single-user mode. This an informational message only. No user action is required.
2006-03-26 20:33:09.53 spid5s Starting up database 'master'.
2006-03-26 20:33:09.60 spid5s SQL Trace ID 1 was started by login "sa".
2006-03-26 20:33:09.64 spid5s Starting up database 'mssqlsystemresource'.
2006-03-26 20:33:09.78 spid7s Starting up database 'model'.
2006-03-26 20:33:09.84 spid5s Server name is 'XYZ-FNB5RZRU9ZP'. This is an informational message only. No user action is required.
2006-03-26 20:33:09.84 spid5s Starting up database 'msdb'.
2006-03-26 20:33:09.98 Server A self-generated certificate was successfully loaded for encryption.
2006-03-26 20:33:09.99 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalMSSQLSERVER ].
2006-03-26 20:33:09.99 Server Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required.
2006-03-26 20:33:09.99 Server Error: 17826, Severity: 18, State: 3.
2006-03-26 20:33:09.99 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2006-03-26 20:33:09.99 Server Error: 17120, Severity: 16, State: 1.
2006-03-26 20:33:09.99 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I am trying to start ms sql server 2005 express as a network user from originally starting as local system. I cannot start the service.
I have given this network user administrator access to sql express from the sql server surface area configuration "Add New Administrator". I have went into the local users/groups and added this network user to the 3 security groups
SQLServer2005MSSQLServerADHelperUser$SQL1
SQLServer2005MSSQLUser$SQL1$SQLEXPRESS
SQLServer2005MSSQLBrowserUser$SQL1
I receive one alert int he event logs/application
EventID: 26010
The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
I receive five errors in the event logs/application
EventID: 26014
Unable to load user specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x80
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x1
EventID: 17826
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately prceding this one in the error log.
EventID: 17120
SQL Server could not spawn the FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I don't recall assigning any sql specific certificates. The reason I'm trying to run this as a network user is because an application on a remote windows server requires it.
After starting the service back running as local system as it was before, I went into the
SQL Server Management Studio Express and edited the properties for this new network user I wish to run the service as. I gave him full access including checking all grants in securables.
I now see a bit of a difference in the event logs with these errors.
EventID: 17058
initerrlog: Could not open the log file 'c:Program FilesMicrosoft SQL ServerMSSQL1MSSQLLOGERRORLOG.' Operating system error =5(Access is denied).
I saw a notification when changing the sql server service's logon that the new network user has been granted the log on locally right.
The second and last new error is
EventID: 17053
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
---- Context -----------------------------------------------
Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS
Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
Any idea how I can fix this?
I have had SQL Server 2005 (Full Version) installed along with SQL Server Express and suddenly SQL Express quit starting and will not start manually. I have reinstalled VS 2005 (Team Edition for Software Dev) and tried to reinstall SQL Express but the installation fails when it tries to start the service. Any suggestions?
Keith
Hello all,
We are deploying an application using SQL Server Express to a wide variety of desktop and laptop machines. We are currently trying to decide whether we should install the SQL Server instance service to start automatically at startup or not. In the latter case, our application would start and stop the service.
Starting automatically will make our app load more quickly, which is important to our users. However, our support team is concerned that leaving the service running will leave our databases vulnerable to becoming "suspect" if, for example, a laptop user's battery dies suddenly. Of course this will always be a problem if the app is running, but our support team believes that having the service running all the time will increase the chances of this happening. One reason for their concern is that an older version of the software used MSDE which was running all the time, and they saw a good number of suspect database issues.
What is the best practice for leaving the service running, especially when there are a lot of laptop users?
Thanks,
Ben
A few service stop/start/restart questions on SQL Server 2005 SP2, whichI'll call SQLS.It looks as if there are *potentially* 6 ways to start/stop SQLSServices like the engine itself, integration services, reportingservice, Agent..-SQLS Configuration Manager-SQLS Surface Area Configuration (for Services and Connections)-Mgmt Studio Local (on server)-Mgmt Studio Remote (on client)-Windows Control Panel->Admin Tools->Services-Command Prompt (ala net start MSSQLSERVER)By policy, I am /not/ Administrator on the server. But I am SysAdminrole in SQLS. I have had various levels of success starting/stoppingservices in the ways listed above. In some I get Access denied, and inothers I get no msg and it simply doesn't work.Is there some special non-Admin OS group I need to be in to start/stopservices? Is this handled differently in the different interfaceslisted above?It seems like my best success for starting/stopping the engine and Agentis in /local/ Mgmt Studio, but /not/ remote Mgmt Studio - the optionsare greyed out on a remote client. Is this by design? Is it a SQLSbug?I'm sure I'm not the only SQLS DBA who does not have Admin rights on hisserver who wants to start/stop services. Generally speaking, how isthis intended to work?Any help appreciated.Allen JantzenA freshly minted DQLS DBA
View 1 Replies View Related
Dear All,
I am not able to start the sql server 2005 database engine services...
Sql server 2005 server is installed in one machine(SERVER) and we have 10 client machine connecting to the server
When i try to start the service from the Service.msc in the SERVER i am getting the following error
===================================
Cannot connect to KEYSKILL.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
------------------------------
Error Number: 2
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Could any one help me to resolve the error
Thanks in Advance
Lalitha
hi all
i'm using a domain accout to setup a sql 2005 cluster in a win2003 cluster.when the installation ended,the SqlServerAgent service can't be started.the event in event viewer
is "SQLServerAgent could not be started (reason: Unable to connect to server "(local)"; LServerAgent
cannot start). " (event id 103 ,source sqlserveragent).I try to use local system and network service account to start it,but it's all the same.
And i found i can connect to the sql cluster vitrual ip 10.73.2.224,but can't connect to the node A.So i enable all the network protocols for the instance MSSQLSERVER,and also enable every ip in the TCP/IP protocol,then restart the sqlserver service,but it still doesn't work.
Any advise?Thanks a lot.
Hello all,
I am intsalling SQL 2005 in an activepassive cluster. The OS is Windows 2003 with SP1. Everything installs OK but the sql server service cannot start afterwards. There are many access errors in the Security Event log - see example below - and numerous "SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. " errors in both the SQL and Application event logs. I have tried installing SQL in both mixed mode and under Windows Authentication and get the same errors. I can install SQL 2005 outside of the cluster on both nodes. Other items of note: This was a SQL 2000 cluster. I uninstalled SQL 2K, the virtual name was changed (IP remained the same) and the DNS entry was updated to reflect the new name. Early in the installation process - 3 or 4 days ago - I got a few errors about the Server Principal Name had to be updated but when I do a setspn -l the both nodes are listed and the entries look fine, though there are no entries for the sql service (MSSQLSvc). Not sure if there should be entries for the virtual name, but there aren't any for either the old or new name. Does the new virtual name need to be added to AD? Here is the security error - Event ID is 560 and it looks like there's a problem with Remote Access and is generated when trying to access either node:
Category: Object Access
Type: Failure Audit
Event_ID: 560
User: NT AuthorityNetwork Service
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: RemoteAccess
Handle ID: -
Operation ID: {0,134558507}
Process ID: 1516
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: CM-OHCO-DS006B$
Primary Domain: SWNA
Primary Logon ID: (0x0,0x3E7)
Client User Name: NETWORK SERVICE
Client Domain: NT AUTHORITY
Client Logon ID: (0x0,0x3E4)
Accesses: Query status of service
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x4
One other informational message that may be of use - looks like there's a problem with dll's for remote access, though this isn't pertaining to SQL:
The description for Event ID ( 0 ) in Source ( srmservice ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: srmservice error: 0, Started the agent (srmagent.exe)..
View 2 Replies View Related
I have a Windows 2003 Server SP1, Active Directory, Application Server and RIS installed on my computer. After installing SQL Server 2005 April CTP my DHCP Service fails to start. In the Event Viewer I see the following Events.
View 20 Replies View RelatedAll,
I have installed sqlserver 2005 using the standard msdn universal installation discs on my laptop running vista business.
The mssqlserver service will not start automatically as the setup configures it
and I cannot start the service manually because I get the 'Access Denied' error message
I am logged on the the computer with adminstration privileges
Thank for all help received in advance,
Dave.....
Hi! I am absolutely new in SQL! Pls help me answering some questions!
I have Microsoft VB Express Edition 2005.
So I created my Database1 and my own table Table1 ( by Add Item).
1)Now in "Show SQL Pane" I write my query.
When I write it with error - it is deleting (after Execute or Verify). So I must write it again! How can I save my query (error query!) for not writing it again?
2) After several tries I succeed to write query without mistake.
So I have a result ( Table2). Then I write another query and have Table3. How can I see my Table2 and IT'S QUERY???
Is there is a log option that can write all my queries and under every query - the result table in my session?
Thank u !
PS. Does Microsoft VB Express Edition 2005 contain SQL Server Management Studio?
SSIS doesn`t start after applying SQL Server 2005 SP1
I get an error Message in event log
event id 7000 source: Service Control Manager Type: Error
Message:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
regards
Lothar Belle
I'm having a 3.0 GHz machine with 512MB Ram. however when i tried to run sql server 2005. this is the result of the System Configuration Check
- WMI Service Requirement (Success)
Messages
* WMI Service Requirement
* Check Passed
- MSXML Requirement (Success)
Messages
* MSXML Requirement
* Check Passed
- Operating System Minimum Level Requirement (Success)
Messages
* Operating System Minimum Level Requirement
* Check Passed
- Operating System Service Pack Level Requirement. (Success)
Messages
* Operating System Service Pack Level Requirement.
* Check Passed
- SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
- Minimum Hardware Requirement (Warning)
Messages
* Minimum Hardware Requirement
* The current system does not meet the minimum hardware requirements for this SQL Server release. For detailed hardware and software requirements, see the readme file or SQL Server Books Online.
- IIS Feature Requirement (Warning)
Messages
* IIS Feature Requirement
* Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
- Pending Reboot Requirement (Success)
Messages
* Pending Reboot Requirement
* Check Passed
- Performance Monitor Counter Requirement (Success)
Messages
* Performance Monitor Counter Requirement
* Check Passed
- Default Installation Path Permission Requirement (Success)
Messages
* Default Installation Path Permission Requirement
* Check Passed
- Internet Explorer Requirement (Success)
Messages
* Internet Explorer Requirement
* Check Passed
- COM Plus Catalog Requirement (Success)
Messages
* COM Plus Catalog Requirement
* Check Passed
- ASP.Net Version Registration Requirement (Success)
Messages
* ASP.Net Version Registration Requirement
* Check Passed
- Minimum MDAC Version Requirement (Success)
Messages
* Minimum MDAC Version Requirement
* Check Passed
furthermore i get error 26 when trying to create new sql server database. and while doing the SQL server surface area configuration i got this message.:
SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)
------------------------------
Program Location:
at Microsoft.SqlSac.MainPanel.FormFeatures..ctor(String machineName, Form callingForm)
HOpefully somebody out there will help me...or is this problem only appearing in sql server 2005 and would it be a better decision to install SQL server 2000...or if someone can help me rectify this problem i'll be really thankful.
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls:ervice:tart
Source Line Number: 301
---- Context -----------------------------------------------
Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS
Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls:ervice:tart
Source Line Number: 301
Any idea how I can fix this?
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
I downloaded and installed Microsoft SQL Server 2005 Express Edition with Advanced Services and Microsoft SQL Server 2005 Express Edition Toolkit. Installs completed successfully, and I can launch the SS Management Studio, but when I launch SS Business Intelligence Development Studio, I get message saying "Windows is searching for devenv.exe". When I search for this file I don't find it on my hard drive.
I thought I'd reinstall the SS Express Edition Toolkit, but I can't find this application in the Control Panel Installed Programs list, so I can't uninstall it.
Any ideas as to how I can get SS Business Intelligence Studio working?
SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.
Here is the error in Event log
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 12/13/2007
Time: 8:25:59 AM
User: N/A
Computer: XXXXXXXXXXX
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Here is i found in log files
ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)
I read on MSDN how to manually uninstall the instance of SQL server 2005 express, however i am not sure that it will remove the service. The reason i need to do this is that an application i have installed SQL Server 2005, and also QPulse5 SQL Server. I have two instances and it is giving me compile issues which i believe is related to having both services. I did add/remove programs and reinstalled just SQL Server 2005 and recieved error message saying that the service failed to start. The whole problem of this occured when we ran DCPromo with SQL installed. After we did we relized you could not promote with SQL Server. I understand that it is not recommended running SQL Server on a DC, however we did not have a choice. I am hoping someone here may have a solution for this. If there is any other information you need just let me know. Thanks
View 1 Replies View RelatedI finally bit the bullet and uninstalled all of Sql Server 2005 and installed Sql Server 2005 Express both Advanced and the Toolkit. I can get in and see everything locally and my production Great Plains server just fine through Management console. The one thing I can't do is open an integration package to process our credit cards.
It's a pretty simple integration, but when I go to open it in SQL Server Business Intelligence Development Studio, the only thing it shows installed was Reporting services, not Integration services. When I try to open the project it gives me:
"The application for project 'c:pcard...' is not installed. Make sure the application for the project type(.dtproj) is installed."
I had a problem earlier with the gui not coming up but was resolved when I applied SS2005 SVP 2. Some items wasn't on the same version. I re-applied svp 2 after I installed SS express and still got the above. If I try and 'add' Integration Services, either thru Express or just regular ss2005, it says it's already installed.
Do I have to modify the registry so that it comes up on Business Intelligence Dev Studio? I can't run the integration if I can't open the project.
I have been receiving the update notice from MS about SQL 2005 Express Service Pack 2. I download it and install. It states successful installs but I get another message requesting the same update. It is Ground Hogs day and Deja Vu all over again.
Question:
Where do I find out if it actually installed?
How do I stop getting the messages from MS to download and install SQL 2005 Express Service Pack 2? I shut the the automatic update but if I turn it on a few days later. I get the same message.
Any help appreciated.
I'm trying to do an unattended install of SQL Express 2005 SP2, and specify that the service runs under the Local Service account. Prior versions of SQL Express worked fine.
With SQL Express 2005 SP2, however, the install fails on XP Pro SP2. It *does* work on Winows 2003 Server.
Here's the command line I'm using:
SQLEXPR.EXE /QB ADDLOCAL=ALL INSTANCENAME=FOO SECURITYMODE=SQL SAPWD=BAR SQLACCOUNT="NT AUTHORITYLOCAL SERVICE"
It fails at the end of the install, saying it can't start the service. If I use "NETWORK SERVICE", it works fine, but that's more privileges than I want the service to have. Is there something else on the command line that I can try to get it to work?
Is this even supported?
-Dave
I downloaded Web Matrix. Very nice. My VB experience makes this very intuitive. But I see in order to do dB development, I also need to download MS SQL, which is labeled MSDE in as step 3 in the Web Matrix download operation. As I follow the link forward I see that there are three distinct components:
Sql2kasp3.exe
Sql2kdesksp3.exe
Sql2ksp3.exe
Are all three of these required?
Also I see there is a beta version of the SQL Server 2005 Express Edition: http://lab.msdn.microsoft.com/express/sql/ here. Would this be a viable alternative.
Hello All:
On my backup server running Symantec BackupExec 11D, I wanted to install Service Pack 2 for SQL Server 2005 Express. I started performing the update using "Windows Update", but cancelled the upgrade process just before it started to install (right after the downloading/verifying download phase of Windows update).
Now when I try to find the SP2 update using Windows Update, it doesnt show up on the update website. Rebooting the server doesnt help. I manually downloaded the file for SQL 2005 Express SP2 and tried installing it, but it says "the component is already installed" and I have to exit the process.
BackupExec 11D is running fine as of now, and it might not face problems later.. but I am not sure. Is there any way to uninstall SP2 and re-install it again!??
Any guidance/pointers is greatly appreciated!
Thanks a lot in advance.
Currently, i am planning to develop a small system for my client by using SQL database. However, i am not sure is it legal to use SQL Express 2005 in this project? I mean setup the SQL Express 2005 in their server then my application will access this database. Is it legal? or Do i need to purchase any license in order to do that? or I need to purchase a SQL Server 2005 Standard or Enterprise version?
View 3 Replies View Related How do SQL 2000 service packs play a role in upgrading? That is, can SQL 2000 Standard with no Service Packs(SP) be upgraded to SQL 2005 Standard, or does SQL 2000 Standard have to have a certain service pack(SP).
What about re-applying SQL 2005 service packs when upgrading Express SP1 to Workgroup, etc.?
Hello
I generate a report (.RDL) using Business Intelligence studio and then deploy it.
This deploys sucessfully (see below)
------ Deploy started: Project: Report Project5, Configuration: Debug ------
Deploying to http://localhost/ReportServer$SQLExpress
Deploying report '/Report Project5/Report1'.
Deploy complete -- 0 errors, 0 warnings
========== Build: 1 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 1 succeeded, 0 failed, 0 skipped ==========
When i try to view in IE browser I am required to enter credentials. I enter Admin user and password but this does not work - not authorized to view page.
Looked in IIS -> ReportServer$SQLExpress and would have expected to see report here or in Pages folder. It is not there!
Any help appreciated
Hello!
We deploy an application that uses SQL Server Express 2005. One of our test engineers tried to use our setup on Windows XP SP 3. But the SQL server installer gave an error - unable to update msxml6r.dll. Is this a bug of the SQL Server installer or do we need to make use of a more recent version of msxml6?
I am continually prompted to download & install this SP by the windows update utility but it always fails to install it.
I have XP SP2. No error msg is provided. I do not have ACT! installed. I do have Oracle 10g Expr. Ed installed. Competitive jealousy?
I found this online:
Important notes about the cumulative hotfix package
€¢ You must enable the SQL Server Management Object (SMO) extended stored
procedures and the SQL Server Distributed Management Object (SQL-DMO)
extended stored procedures before you install the cumulative hotfix package.
Where does one enable SMO & SQL-DMO?
I looked in the summary log file in the Hotfix directory and it says that the problem is
that SQL Express cant be started. See below.
I went into the SQL Configuration Mgr and tried to start it and it fails to start.
No reason given. Now what?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Time: 11/22/2007 09:44:37.546
KB Number: KB921896
Machine: TOSHIBA-ROGER
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
/quiet
/allinstances
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Express Database Services (SQLEXPRESS) ENU RTM 2005.090.1399.00 x86 EXPRESS
Express Database Services (SQLExpress) ENU RTM x86 EXPRESS
**********************************************************************************
Products Disqualified & Reason
Product Reason
Express Database Services (SQLEXPRESS) Unable to start service
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Express Database Services (SQLEXPRESS)
Product Version (Previous): 1399
Product Version (Final) :
Status : Not Applied
Log File :
SQL Express Features : SQL_Data_Files,SQL_Engine,SQL_Replication,SQL_SharedTools
Error Number : 11042
Error Description : Unable to start service
----------------------------------------------------------------------------------
Product : Express Database Services (SQLExpress)
Product Version (Previous):
Product Version (Final) :
Status : Not Applied
Log File :
SQL Express Features : Client_Components,Connectivity,SDK
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
Unable to start service
Exit Code Returned: 11042
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Hello,
I have been trying to drill down to the cause for this event log message:
"The configuration of the AdminConnectionTCP protocol in the SQL instance
SQLEXPRESS is not valid."
It is reported from the SQLBrowser service as a warning when the service
starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no
errors. I have seen this error on three computers. Two are running SQL 2000, 2005
and Express. One was only running Express, but still this message.
I then looked into the log for the SQL Express server itself. It shows this
message on startup:
"Dedicated administrator connection support was not started because it is
not available on this edition of SQL Server. This is an informational message
only. No user action is required."
Now, it appears to me that these two messages may relate to the same
"error" (or rather behaviour by design). So, can anyone confirm that the
warning in the event log from the SQL Browser service occurs becuase of that
the SQL Express edition doesn't allow any "AdminConnection", but the SQL
Browser service isn't aware of that SQL Express edition shouldn't support that, and
reports it as a warning (implying that we can't do much about this warning)?
Thanks for any input on this issue!