SQL Express Browser Response To 2000 SQL Server Service
Dec 14, 2007
Please assist, the issue with SQL 2005 Browser and SQL 2000 Server Service is understood.
Our problem is with networked 2000 instances and SQL Express. The SQL 2000 machines (Standard & MSDE) do not have SQL 2005 or Express installed only 2000. When a SQL Express computer is put on the network with the SQL Browser service running almost all SQL 2000 machines lose sight of the other SQL 2000 instances. The second the
SQL Browser is turned off on the SQL Express box the SQL 2000 machines can see each others instances.
It appears that the response from the SQL Express SQL Browser causes the SQL 2000 machine to stop listening for responses. Once in a while one of the SQL 2000 instances will show up with the SQL Browser active on the network and it is my belief that it is because that response made it in before the SQL browser response. Please help as this does not appear to be a recognized issue. I'm assuming there aren't many sites running as many named instances on individual machines like we do.
Please note this appears to be a problem with SQL Express Browser not SQL 2005 Standard's which runs without problems on our network.
THANK YOU!
View 1 Replies
ADVERTISEMENT
May 1, 2007
Hello,
I have been trying to drill down to the cause for this event log message:
"The configuration of the AdminConnectionTCP protocol in the SQL instance
SQLEXPRESS is not valid."
It is reported from the SQLBrowser service as a warning when the service
starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no
errors. I have seen this error on three computers. Two are running SQL 2000, 2005
and Express. One was only running Express, but still this message.
I then looked into the log for the SQL Express server itself. It shows this
message on startup:
"Dedicated administrator connection support was not started because it is
not available on this edition of SQL Server. This is an informational message
only. No user action is required."
Now, it appears to me that these two messages may relate to the same
"error" (or rather behaviour by design). So, can anyone confirm that the
warning in the event log from the SQL Browser service occurs becuase of that
the SQL Express edition doesn't allow any "AdminConnection", but the SQL
Browser service isn't aware of that SQL Express edition shouldn't support that, and
reports it as a warning (implying that we can't do much about this warning)?
Thanks for any input on this issue!
View 5 Replies
View Related
Dec 14, 2007
The problem can be seen in Enterprise Manager for 2000 (all service packs), Service Manager for MSDE (2000 all service packs), and OSQL (2000 all versions).
The exact problem is as follows:
In a network environment if SQL EXPRESS (problem does not occurr with 2005 Standard) is installed using defaults
SQL 2000 & MSDE machines will no longer see instances. This is a browser issue for 2000 and MSDE. For some reason the response back to the 2000 machine from the EXPRESS machine causes the 2000 machine to stop listening for reponses.
If you have a network with SQL 2000/MSDE machines that have named instances (default instance is not affected) they will lose sight of eachother when a SQL EXPRESS box is put on the network with its SQL browser service running. We have tried service pack 3a and 4 on the 2000 boxes and it does not resolve the issue. It may resolve issues with 2005 and 2000 on the same machine but this problem is with networked machines and doesn't appear to be the same issue. The SQL EXPRESS machine will be able to see all the
named instances from the 2000 boxes and the 2000 machines usually will only see the EXPRESS named instance until the EXPRESS box SQL Browser service is stopped.
No word from Microsoft so far.
DOES ANYONE HAVE A SIMILAR ENVIRONMENT AND RUN INTO A SIMILAR ISSUE?
View 1 Replies
View Related
Sep 6, 2007
I read an MSDN article that states the following.
SQL Server Browser listens on a UDP port and accepts unauthenticated requests using SQL Server Resolution Protocol (SSRP). SQL Server Browser should be run in the security context of a low-privileged user to minimize exposure to a malicious attack. By default, SQL Server Browser starts using the Local System account. The logon account can be changed by using the Windows Services program. The minimum user rights for SQL Server Browser are as follows:
* Deny access to this computer from the network.
* Deny logon locally.
* Deny logon as a batch job.
* Deny logon through Terminal Services.
* Log on as a service.
* Read and write the SQL Server registry keys related to network communication (ports and pipes).
In our case the SQL Server Browser service is running under the same Windows account as our other SQL Server services. Do you recommend creating a separate Windows account for the SQL Server Browser service as described above?
Can you help me understand how an attack can occur?
Thanks, Dave
View 1 Replies
View Related
Apr 28, 2006
I have configured an instance to use static port, say 1435, and I turned off the Browser service.
I would like to know if I can use SSMSE to connect to the instance database directly. The instance is listening at port 1435 and accepting connection requests from other methods.
What I need to put into the "Server name: " field?
Normally, it would be like: <serverIP><InstanceID> with Browser turned on.
Now how do I add the port information to it, I tried
<serverIP>:<portNumber><InstanceID>
<serverIP><InstanceID>:<portNumber>
<serverIP><InstanceID> <portNumber>
None of them worked.
Any suggestions?
Thanks.
View 4 Replies
View Related
Oct 10, 2007
I have recently installed SQL 2005 client tools with SQL Server Management Studio and accessing databases on a SQL 2000 server. The response I am getting is extremely slow. Should I go back to SQL 2000 client or are there methods by which I can improve the performance.
Thanks
Sam
View 1 Replies
View Related
Apr 20, 2007
Hi,
I have two servers, one production server and one backup server which have transactional replication with a pull subscription.
When I configure replication, it works fine during our test weekends testing production load. After tests, replication looks fine for a random number of days. Then, all of a sudden, an error message is displayed on one of the agents: "The agent is suspect, no response within 10 minutes." This has happened a number o times. If I remove replication and configures it again, it always works. Sometimes it works by just updating one of the tables and the error message disappears. The last time (today) that did not work. Updating the database did not replicate and the error message remained.
Has anyone experienced this same problem and has a god solution. One thing that is common is that the error message appears after long times of inactivity on the servers, or perhaps after a restart but that I am not sure about.
Question 1: How can I prevent this error message?
Question 2: Are there any special things to think about when I need to restart the servers and replication is configured, e.g. after installing updates from Windows Update.
I would be very grateful for any answers regarding this.
Best,
/M
View 1 Replies
View Related
Feb 8, 2007
Hi All,
I am using SQL Server Express to connect to the network using VPN on a local machine. I have done the following..
a.) Enabled the remote connections for the Express Instance and rebooted the machine.
b.) Connected to the machine with Express Edition locally and can also connect other SQL Server instances from it to verify connectivity.
c.) Yes, SQL Browser Service is running.
d.) Firewall is not turned on, so I do not have to configure any exceptions.
Now here is the big problem: When I browse for SQL Servers on the network the machine does not show up on the list, i.e "macinenameSQLExpress". I had uninstalled and reinstalled the Express edition and rebooted the machine several times with no luck on the SQL Express Instance showing up on the browser list. I even changed the default instance name to "machinenameMACHINE1" on one of the reinstalls. However, I can connect to other SQL Instances from it. But, I cannot connect to it from other machines since its not registered on the network. I have been working on this for the past few days by looking for a solution via this and other forumns. Is there some setting somewhere that I am missing that prevents this instance from not showing up on the browser list. This issue with SQL Express Edition is baffling as well as frustrating and any ideas that can resolve this issue is very much appreciated.
View 15 Replies
View Related
Aug 18, 2015
I'm running into an interesting issue when returning a response from an XML-based web service. The following code returns good values from PRINT
@response
DECLARE @address varchar(50) = '90210'
DECLARE @URL varchar(MAX)
SET @URL = 'https://somewebsite/map.xml?zip=' +
CASE WHEN @Address IS NOT NULL THEN @Address ELSE '' END
SET @URL = REPLACE(@URL, ' ', '+')
[code]...
However, on some calls to the web service, the value returned is longer than 4000 characters. In these instances, it appears as though it breaks the whole thing and returns nothing. However, if I change the @Response parameter to nvarchar(max), it never returns anything, even on responses that are shorter than 4000 characters. what the fundamental difference is here between nvarchar(4000) and nvarchar(max) with respects to how it stores responseText. More importantly, how to get this to return a value even when it exceeds 4,000 characters?
View 2 Replies
View Related
Feb 8, 2008
I am using SQL Server 2005 developer edition and Visual Studio 2005. I am working on local computer and when I define a cube I am using data sources to which I can connect without any problem using "Test connection". However, when I want to perform calculation or browse a cube I get a message of either I am as a user do not have permission to access source database (in reality I do have this permission) or source database does not exist (in reality it exists). I check the SQL Server Browse Service and it is not running and the option of starting it is disabled (Start mode is undefined and only properties option can be used). I already have enabled the TCP/IP and Named Pipes protocols but I still cannot browse cube data.
Any help SUPER welcome.
Elka
View 2 Replies
View Related
Feb 10, 2006
I tried the instructions in sqlexpress's WebLog to connect to a remote database.
Using SQL Server Configuration Manager I enabled TCP/IP and then tried to start the browser service.
When I right clicked the icon, all the options (Start,Stop,etc) are grayed out.
Can anyone help me with this, please?
Thank you
View 5 Replies
View Related
Jan 23, 2008
Hi,
I was unable to start SQL Browser Services (time out) after installing SQL Server 2005 Analysis Services. The configuration of the server is
1. Win 2003 R2
2. Sql Server 2000 SP4
3. Sql Server 2005
Anybody has encountered this before? Any advice will be good.
Thanks!!
View 1 Replies
View Related
Nov 2, 2006
I recently setup mutliple instances of SQL Server Express at my office. I have 1 default instance, and two named instances. I can connect to the named instance of the default port of 1433 with Microsoft SQL Management Studio Express, however the other instances on dynamic TCP ports can not be accessed by the instance name over the internet. I have to specify the dynamic TCP port in this form: xxx.uconn.edu/SQLTEST, Port number. My current thinking is that the SQL Browser service should tell Management Studio Express what dynamic port number each SQL instance is listening to. Any ideas?
View 1 Replies
View Related
Jul 5, 2007
I have made my website using SQL Server Express edition. It is totally database driven and manypages use databases to display data. My problem is that after paying for webhosting fees my web host told me that they do not support SQL Server express edition. Instead they have support for MySQL and Ms Access. Except that there is this MS 2000 Database service for an additional cost. Any recommendations what I should do except changing the host? If I pay for MS 2000 Database servicem, will my website work? My user management(i.e ASPNETDB database) was created by Visual Web developer and I don't want to do user management myself. Any advice?
View 2 Replies
View Related
Aug 6, 2007
Hi all,
i installed two servers, one instance SERVER05 and second SQL SERVER EXPRESS called SQLEXPRESS.
my SQL Server Browser service is in state "Change Pending" i dont know if it is ok?
I setup SERVER05:
TCP/IP in Conf Manager Enabled, listen all yes, and IPAll TCP Dyn. ports nothing = blank, TCP PORT 2001
i think that SERVER05 is listening on port 2001 now.
i restart SERVER05 and try this command:
SQLCMD -E -S MACHINEASERVER05,2001
connect successful
I want to do this with SQLEXPRESS
i set TCP enabled, Listel all, Dyn port blank, TCP PORT 2002 restart and get error:
Unable to start service MSSQL$SQLEXPRESS on server MACHINEA
Additional information
The MSSQL$SQLEXPRESS service on MACHINEA started and then stopped. (ObjectExplorer)
Can u help where is problem?
Thnx for help.
Jakub.
View 11 Replies
View Related
Sep 13, 2006
Herre is my connection string:<add name="PageEngine" connectionString="Data Source=MyServerSQLEXPRESS;Initial Catalog=PageEngine;Integrated Security=True;User ID=MyID;Password=MyPwd;" providerName="System.Data.SqlClient"/>When I run the app using WDE (Web Developer Express), Everything works fine. I can access and diplay data from the database with no problems. However, when I try to run it from a browser on the local machine or a remote machine it fails to create a datareader. I am using the Database factory from Enterprise Library. IDataReader dr = pe.DataReaderFromStoredProcedure("pe_GetApplicationInformation", null, "PageEngine");if (dr.Read() != false) (* this is the line it fails on every time){_ApplicationName = dr["ApplicationName"].ToString();_Version = dr["Version"].ToString();_Copyright = dr["Copyright"].ToString();_Owner = dr["Owner"].ToString();}dr.Close(); Here is the "DataReaderFromStoredProcedure" methodpublic IDataReader DataReaderFromStoredProcedure(string spName, peParameters parameters, string connection){Database db;if (connection != null)db = DatabaseFactory.CreateDatabase(connection);elsedb = DatabaseFactory.CreateDatabase();DbCommand dbCommand = db.GetStoredProcCommand(spName);dbCommand.CommandType = CommandType.StoredProcedure;Here is the error message I get:Object reference not set to an instance of an object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error: Line 53: IDataReader dr = pe.DataReaderFromStoredProcedure("pe_GetApplicationInformation", null, "PageEngine");
Line 54:
Line 55: if (dr.Read() != false)
Line 56: {
Line 57: _ApplicationName = dr["ApplicationName"].ToString();Source File: c:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkingApp_CodeBusiness LayerApplicationInformation.cs Line: 55 Stack Trace: [NullReferenceException: Object reference not set to an instance of an object.]
PageEngine.ApplicationInformation..ctor(Page pg) in c:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkingApp_CodeBusiness LayerApplicationInformation.cs:55
login.GetTitle() in C:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkinglogin.aspx.vb:45
login.Page_Load(Object sender, EventArgs e) in C:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkinglogin.aspx.vb:13
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 I have tried so many things found on the forums, I don't know what to do anymore![:'(]
View 2 Replies
View Related
Mar 14, 2007
Hi
I'm a newbie and I have a problem that i can't solve despite sitting here all day trying to wortk it out.
I have installed SQL Server Express 2005 along with the associated toolkit. Previous to that i installed MS Visulal studio 2005, .NET 2.0 and MSDN.
The problemn is that it appears despite installing everything i don't have SQLExpress services running on my PC. I have admin rights, it installed okay but there is nothing to connect to.
When i run "sqlcmd.exe -s (local)SQLExpress -E" from the command prompt i get the following message:
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establi
shing a connection to the server. When connecting to SQL Server 2005, this failu
re may be caused by the fact that under the default settings SQL Server does not
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
When i run SQL Server Configuration there is no "SQLExpress" service present under "SQL Server 2005 Servcies" in SQL Server Configuration dialog; just a message saying:
"there are no items to show in this view"
When i run Surface Area Configuration i get the following message:
TITLE: Surface Area Configuration
------------------------------
No SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)
------------------------------
BUTTONS:
OK
------------------------------
If you can shed any light on this id be extreamly grateful as i'd been here for hours before stumbling across the toolkit (why this wasn't bundled i don't know) only to realise once i had it that the SQLExpress service isn't running :(
Cheers,
Nick.
View 1 Replies
View Related
Sep 26, 2007
I have a Microsoft Cluster running on Server 2003 Entrprise. SQL 2000 8.00.2039 (SP4). 5gb physical memory installed.
With the databases online we run a test failover from the Cluster administrator. It takes about 30-40 seconds and completes without generating any Server Event log errors nor SQL log errors. Everything looks good from an administrative stand point.
However, when we test with running a series of queries to the databases, then failover, we notice that it can take up to 3 or 4 minutes before some of the databases will respond. Connections are not refused, they just sit there.
How can we troubleshoot this or does anyone have a similiar experience with this scenario?
View 5 Replies
View Related
Mar 21, 2007
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server
When I try to do it I recive the following message:
____________________________________________________________________________________
System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------
Program Location:
in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
____________________________________________________________________________________
What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
View 1 Replies
View Related
Aug 18, 2006
Hi
We would like to install Sql 2005 Enterprise Edition (including database engine, reporting service, integration service and analysis service) as a sepearte instance on a server which already has Sql 2000 with reporting services and analysis services. We do not want to disturb the existing sql 2000 setup.
If we do that then what will happen to my earlier sql 2000 reporting service? Will it be upgraded to sql 2005 reporting service? I heard that reporting services are instance unaware application. Where will be the default reporting service database available?
Please help us.
Regards,
Sankar N
View 1 Replies
View Related
Jun 22, 2007
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
---- Context -----------------------------------------------
Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS
Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
Any idea how I can fix this?
View 1 Replies
View Related
Aug 22, 2007
This computer gets set to autostart the SQL Server Service, which is set to local, (have also tried local network and user specific), and everything works fine. But when it gets rebooted, the service refuses to start.
We disabled the Mcafee and Windows firewall. No effect.
The SQL Browser and Full Text Index Services start automatically just fine.
Anyone have any experience with this?
Thanks,
Pat
View 3 Replies
View Related
Apr 17, 2006
I have had SQL Server 2005 (Full Version) installed along with SQL Server Express and suddenly SQL Express quit starting and will not start manually. I have reinstalled VS 2005 (Team Edition for Software Dev) and tried to reinstall SQL Express but the installation fails when it tries to start the service. Any suggestions?
Keith
View 9 Replies
View Related
Jun 30, 2006
Anyone else had this problem?
I think I had a beta installed at some point. After a dozen attempts, I got SQL Server Express to install, but I had to change from the default service name (SQLExpress). When trying to configure the .NET samples that come with Visual Studio 2005, the ConfigSamples.exe does not recognize that I have SQL Server Express installed. I suspect this is due to my non-default service name. I have verifed that there is not a service installed (at least according the Services Admin Tool) that is named SQLExpress.
I just dropped over $600 for a personal copy of 2005 Professional, and I would just like to view the samples. Someone take pity on my poor soul and help out. I promise to help you help me and show much appreciation.
Any and all help is appreciated.
Jim
View 6 Replies
View Related
Jan 23, 2007
I installed SQL Server Express on my local pc using the default settings. I also have SQL Server 2005 installed on the same machine. With the SQL Browser service running, I am unable to connect to the SQL Server Express database.
I receive error: Cannot connect to MyComputerNameSQLEXPRESS.
Additional information: An error has occurred while establishing a connection to the server. When connecting to the SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server)
Any ideas why I'd be receiving an error about remote connections when the connection I'm trying to make is local? - Incidentally, I have configured the SQL 2005 Server to have TCP enabled, Named Pipes enabled, and Shared enabled.
If anyone knows how to solve this issue, please also respond to: bbarry@yahoo.com
Thanks so much!
View 2 Replies
View Related
Apr 28, 2006
Hello All,
I am installing SQL Server Express from the command line using the following parameters
INSTANCENAME=MSSQLSERVER ADDLOCAL=ALL SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0 SAPWD=TEST
After the install is done I start the service form the command prompt using
start mssqlserver
I see that the SQL Server service has started under NETWORK SERVICE account!!! when the documentation i Read on MSDN says it starts in Local System account
Can any one explain me the possible reasons
Thanks
View 8 Replies
View Related
Mar 5, 2007
I would like to call a web service from a sql server 2000 s.proc/sql job, but if there is a better way please let me know. I'm using Captaris Workflow to create and manipulate workflow processes. I have a sql job that will create some pdf's. I want to call the web service that creates a new process in a step from that sql job. I have read about doing this with extended s.procs, but I'm trying to find any possible solutions. Essentially, the web method I want to call will insert several records into sql so I know I can at least do that. I would still like to know if I can make a call to the web service from the sql job. Thanks for any help.
View 1 Replies
View Related
Feb 21, 2004
Hi,
I am trying to install the service pack 3 for sql server 2000 but cannot do it. I keep getting stuck at the screen where it asks u for the windows authentication or the sa password.
I select the sa password option and enter the password but it gives me an error saying that it was unable to connect.
Can someone tell me what to do.
Kind Regards,
Yoshi
View 1 Replies
View Related
May 5, 2004
Where to get SQL server 2000 reporting service for VS.NET?
View 4 Replies
View Related
Dec 19, 2004
Hi all,
I have msde version 8.00.534 that is sp2 I think. When I attempt to upgrade to sp3a I get: “The instance name specified is invalid� . I am working with win XP home edition that include IIS.
Have some suggestions? Thanks
View 1 Replies
View Related
Dec 19, 2004
Hi all,
I have msde version 8.00.534 that is sp2 I think. When I attempt to upgrade to sp3a I get: “The instance name specified is invalid� . I am working with win XP home edition that include IIS.
Have some suggestions? Thanks
View 1 Replies
View Related
Apr 22, 2002
Hi all,
I want to setup the SP2,so I like to know before if the SP2 is valid and proved and with SP2 I have any problem on administring the server.
Thanks in advance
Jalal
View 1 Replies
View Related
Jan 8, 2008
Hi,
I have an interesting situation here. I have a SQL Server 2000 database which is attached to SQL Server 2005. The database (SQL 2000) however only has service pack 3 applied. I need to apply SP4 before I can move forward with SQL 2000->2005 upgrade. The question: can I somehow apply this support package with my current configuration or should I install full SQL 2000 front-end anew (which I don't have at the moment)? Whenever I try to run SQL 2000 SP4 it complains "SQL Server 2000 is not installed on this machine."
The server I try to install the update is Windows Server 2003 R2 Standard Edition x64. SQL Server 2000 database itself is x86 (obviously).
Thanks.
View 4 Replies
View Related
