SQL Express Eventlogs?
Apr 26, 2006
Hi.
Is it possible to prevent SQL Express for logging in the EventLog?
It fills my Eventlog very fast with messages like:
Starting up database 'PosDB'. etc...
Other application crash becuase the eventlog got filled.
I know I can change eventlog settings but the problem is that our customer don't wonna do this and if the SQl Express stop logging all the time the log will get mush smaller :-)
So is there any settings I can do in the dabases or the SQL Express services to prevent all information logs?
Thanx. Best Johan
View 4 Replies
ADVERTISEMENT
Mar 23, 2007
I wanted to prevent ntbackup from locking my databases during the nightly backup, so I excluded the ...Data folder from the backup set. However, I think that ntbackup is backing up the databases during the volume shadow copy phase of the backup, even though their folder was excluded from the backup set (I verified this setting in the .bks file). Although the lock only lasts a few seconds, the error message is worrisome and I would prefer to skip the databases completely. How can I stop the volume shadow copy from doing this?
Below is the the sequence of events leading up to the error, most recent first:
Event Type: Error
Event Source: SQLVDI
Event Category: None
Event ID: 1
Date: 3/23/2007
Time: 3:01:49 AM
Description:
SQLVDI: Loc=CVDS::Cleanup. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller.
. Process=8684. Thread=7556. Client. Instance=. VD=.
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (6)
Event ID: 18264
Date: 3/23/2007
Time: 3:01:48 AM
Description:
Database backed up. Database: master, creation date(time): 2007/03/12(15:08:23), pages dumped: 1, first LSN: 268:352:37, last LSN: 269:24:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{66DC3082-FB76-4312-AD74-4BDAD9FC7209}1'}). This is an informational message only. No user action is required.
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 3198
Date: 3/23/2007
Time: 3:01:47 AM
Description:
I/O was resumed on database master. No user action is required.
Event Type: Information
Event Source: ESENT
Event Category: ShadowCopy
Event ID: 2003
Date: 3/23/2007
Time: 3:01:47 AM
Description:
lsass (956) Shadow copy 24 freeze stopped.
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 3197
Date: 3/23/2007
Time: 3:01:45 AM
Description:
I/O is frozen on database master. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
Event Type: Information
Event Source: ESENT
Event Category: ShadowCopy
Event ID: 2001
Date: 3/23/2007
Time: 3:01:45 AM
Description:
lsass (956) Shadow copy 24 freeze started.
Event Type: Information
Event Source: NTBackup
Event Category: None
Event ID: 8018
Date: 3/23/2007
Time: 3:00:14 AM
Description:
Begin Operation
View 43 Replies
View Related
Apr 14, 2008
Hello
I got a sql server express that i am trying to connect form win or web forms(2.0) €“ express as well.
My problem:
Can not connect to the server in any way!
Even the designer cont find any sql server on my machine; for example "the data source configuration manager" (gui) in enyn way its can not find the sql server express (2005)
So my question is:
if all what i used is the express version - is it possible to connect and use the sql.s express form the vs. express
View 10 Replies
View Related
Apr 16, 2007
When I downloaded/started using Visual Web Developer I was under the impression that I needed to install SQL Server Management Studio Express in order to create/manage databases, and to provide the engine to access the data.
Since then I have found tutorials and have successfully created/used databases solely from within Visual Web Developer. I'm assuming that Visual Web Developer includes a database engine, much like the webserver that is included. (This is an awesome thing).
When I tried to upload my web application with database to my production server, the database would not work, it started working after I installed SQL Server Management Studio Express on the server.
Is it my understanding that you need SQL Server Management Studio Express if you do not have Visual Web Developer Express installed in order to provide the data access engine?
Also, I am unable to "attach" my Visual Web Developer Express created database to SQL Server Management Studio Express. Are there any posts that provide more information about this topic?
The only reason I'm asking is that I have extra whitespace on the end of my text fields, and I thought ANSI_PADDING was turned on. I do not see the option in Visual Web Developer Express, but have found it in SQL Server Management Studio Express.
View 14 Replies
View Related
Aug 31, 2007
Hi all,
In my SQL Server Express (that is installed in my Windows XP Pro PC), SQL Server 2005 Network Configuration has Protocols for SQLEXPRESS. I tried to do "Enabling CLR Integration" in my SQL Server Express: (1) If I clicked on "Surface Area Configuration for Services and Connections", I got an error "An exception occurred in SMO while trying to manage a service, (Microsoft.SqlServer.Smo) Additional information: Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). (2) If I clicked on "Surface Area Configuration for Features, I got a different error "Computer localhost does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required computer has the required Windows Management Instrumentation components and then try again. (SQLSAC) Additional Information: An exception occurred in SMO while trying to manage a service. (Microsoft.SqlServer.Smo). Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). Please help and tell me how I should do to get "Enabling CLR Integration" in my SQL Server Express done and how I can create SQLCLR Project in VB 2005 Express.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
Aug 22, 2007
Hi all,
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
Mar 5, 2008
Hi all,
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area":
(1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the
following: Select Computer
The Surface Area Configuration of this surface area of this computer or a remote computer.
Specify a computer to configure: O Local computer
O Remote computer
Should I choose the "Local computer" or the "Remote computer" option?
(2) Below the "Configure Surface Area for localhost [change computer]",
I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS
|-| Database Engine
Service
I picked => Remote Connection
On the right-hand side, there are: O Local connections only
O Local and remorte connections
O Using TCP/IP
O Using named pipes only
O Using both TCP/IP and named pipes
Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
Thanks in advance,
Scott Chang
View 10 Replies
View Related
Nov 13, 2006
Hi,When I attempt to add the membership functionality to a database created within VWD Express, by using the aspnet_regsql.exe application (connecting to ./SQLEXPRESS using Windows authentication), the database I've created within VWD Express doesn't appear within the list of accessible databases. I have the same problem when attempting to access the same database within Management Studio Express.Does this mean that databases created from within VWD Express don't use the same storage mechanism or paradigm as those already available within Management Studio Express? Or perhaps I need to somehow register the database using Management Studio Express? As a side note, I'm not sure if the "File/Open File" menu option within Management Studio Express holds the answer to my problems, but rather bizarrely, it crashes Management Studio Express when I select it.Apologies for the rambling - in essence my question is "How can I make databases created within VWD Express appear within aspnet_regsql.exe and/or Management Studio Express?"Many thanks,Jon
View 6 Replies
View Related
May 17, 2007
hii download free starter kit timetraker application( i downloaded both Visual web devaloper and sql server express from the Internet) when i tried to run it it is showing the following errorAn error has occurred while establishing a connection to
the server. When connecting to SQL Server 2005, this failure may be
caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: Shared Memory Provider, error: 40
- Could not open a connection to SQL Server)plz give me the solution above error thanks in advance vittal
View 2 Replies
View Related
Apr 4, 2007
I am having the same problem as Michael, with the exception that my laptop is running windows XP SP2.
BUT when I look at the SETUP LOG FILE there is NOTHING in it. This is what I get:
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Tue Apr 03 19:36:54 2007
(LAPTOP NAME HERE) : Unknown article Result.
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Tue Apr 03 19:36:56 2007
(As you can see, there is nothing in the file)
Any ideas what could be wrong?
Thanks
Pedro
View 6 Replies
View Related
Sep 8, 2007
Hi
I have VC++ express and MSSQL SMS express and have an application working nicely locally. The Data explorer and data connections part works really easily.
Now, I want to make the application available to my home network.
I mapped the drive where the database is and called it Z: so I could put my "release" on my other network PC and assumed it would find Z: if I mapped the shared network drive on that machine and called it Z:
But: I can't even add the mapped connection on the local machine, I get:
The file "Z:databasescalorie.mdf" is on a network path not supported for database files. An attempt to attach.....etc"
It works fine on the original F drive.......
Am I approaching this the wrong way. How should I distribute to network PCs?
thanks hopefully
David
View 5 Replies
View Related
Feb 20, 2007
I have uninstalled the SQL Server Express Edition that I have installed from the CDs that were given to me during a Chicago Conference when READY TO LAUNCH Visual Studio 2005, SQL SERVER 2005, and Biz Talk 2005.
Then I went to microsoft website: http://msdn.microsoft.com/vstudio/express/sql/register/default.aspx and downloaded and installed the so called Microsoft SQL Server 2005 Express Edition and I got the messages Error that you read below. Then I Uninstalled Microsoft SQL Server 2005 Express Edition and went again to msdn website and downloaded Microsoft SQL Server 2005 Express Edition Advanced Services SP1 and installed it. I got again the same message as below.
MESSAGE:
1. First comes a window with the title: €œsetup.exe €“ Unable to Locate Component€?
And it displays a message:
This application has failed to start because MSTDCPRX.dll was not found.
Re-installing the application may fix this problem.
2. After I click the OK button of this window it comes another window with the title: €œMicrosoft SQL Server 2005 Server Setup€?
And it displays a message: Failed to load SqlSpars.dll
Does anybody can tell what is going on with the 3 times I tried to installed different SQL Server 2005 Express Edition and I get the same message?????
Thanks for your help and support when you have time to respond.
Sincerely,
TonyC
MORE INFORMATION ON THE:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFiles
1. C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core.txt
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 87
Aborting queue processing as nested installer has completed
Message pump returning: 87
2. C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core(Local).txt Running: InvokeSqlSetupDllAction at: 2007/1/20 1:22:8
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution.
Unable to load setup helper module : 87
Message displayed to user
Failed to load SqlSpars.dll
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_.NET Framework 2.0.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0001.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2007/1/20 1:22:17
Message pump returning: 87
3. C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Datastore.xml
<
<S,<Scope Type="SetupStateScope" Id="">
<Property Id="machineName">B3-XP</Property>
<Property Id="logDirectory">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOG</Property>
<Property Id="logSummaryFilename">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt</Property>
<Property Id="logSequenceNumber">1</Property>
<Property Id="primaryLogFiles">{ ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_.NET Framework 2.0.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Support.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core(Local).log"] }</Property>
<Property Id="watsonFailedAction">InvokeSqlSetupDllAction</Property>
<Property Id="watsonFailedActionErrorCode">87</Property>
<Property Id="watsonFailedFunction">sqls::InvokeSqlSetupDllAction::perform</Property>
<Property Id="watsonFailedFunctionErrorCode">87</Property>
<Property Id="watsonSourceFileAndLineNo">setupsqlsetupactions.cpp@1709</Property>
<Property Id="watsonModuleAndVersion">setup.exe@2005.90.3042.0</Property>
<Property Id="watsonMsi">None</Property>
<Property Id="watsonMsiAndVersion">None</Property>
<Property Id="watsonSourceFile">setupsqlsetupactions.cpp</Property>
</<Scope>
View 9 Replies
View Related
Feb 18, 2008
Hi,
I am a newbie so i apologies beforehand for any mistakes i make on this forum.
Anyway, i created an asp.net website using the MS Visual Web developer tool. This has a couple of SQL SERVER databases within it.
I then latervinstalled the SQL SERVER management studio express in order to manage the SQL SERVER DBs that i had as part of my website but they do not appear within the management studio db list.
As this is the express version, is there anyway of importing the existing SQL SERVER dbs that i have to the management studio so i can manage them from there?
Regards,
Shuja.
View 5 Replies
View Related
Sep 28, 2006
Everything was working fine. I have been able to connect using windows authentication. Then, I went into the ODBC manager to add a data source and it failed to connect so I went back into the Server management studio to modify users. After doing this I now get an error when I try to conenct the management studio to the SQL server.
I wasn't modifying the login for my windows account that I normally use, I was modifying a different one, however I now get the message "An error has occured while establishing a connection to the SQL server. This kind of problem can ocure because the default behavior of the server does not support all connection methods" blah blah.
Does anyone know how I can attach to the server? Or, do I need to somehow remove the server and create a new one? How would I do that?
Thanks in advance for any input.
View 1 Replies
View Related
Mar 21, 2007
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server
When I try to do it I recive the following message:
____________________________________________________________________________________
System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------
Program Location:
in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
____________________________________________________________________________________
What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
View 1 Replies
View Related
Mar 4, 2007
Am running vista premium and am trying to complete the installation of Office 2007 Professional (disc 2) and keep getting an error message that SQL Service 2005 (Express) cannot install. Logfile below:
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Home Edition (Build 6000)
Time : Sun Mar 04 15:25:13 2007
Machine : MICHAELTODD-PC
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : MICHAELTODD-PC
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : MICHAELTODD-PC
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.3042.00
Install : Successful
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : MICHAELTODD-PC
Product : SQL Server Database Services
Error : SQL Server Setup Failed to compile the Managed Object Format (MOF) file c:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof. To proceed, see "Troubleshooting an Installation of SQL Server 2005" or "How to: View SQL Server 2005 Setup Log Files" in SQL Server 2005 Setup Help documentation.
--------------------------------------------------------------------------------
Machine : MICHAELTODD-PC
Product : SQL Server Database Services
Error : SQL Server Setup Failed to compile the Managed Object Format (MOF) file c:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof. To proceed, see "Troubleshooting an Installation of SQL Server 2005" or "How to: View SQL Server 2005 Setup Log Files" in SQL Server 2005 Setup Help documentation.
--------------------------------------------------------------------------------
Machine : MICHAELTODD-PC
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.1.2047.00
Install : Failed
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQL.log
Last Action : InstallFinalize
Error String : SQL Server Setup Failed to compile the Managed Object Format (MOF) file c:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof. To proceed, see "Troubleshooting an Installation of SQL Server 2005" or "How to: View SQL Server 2005 Setup Log Files" in SQL Server 2005 Setup Help documentation.
Error Number : 29513
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Sun Mar 04 15:27:03 2007
List of log files:
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_Core(Patched).log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQLSupport_1.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQLNCLI_1.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SqlWriter_1.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQL.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_Datastore.xml
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_.NET Framework 2.0.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_Support.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_Core.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SCC.log
View 8 Replies
View Related
Aug 18, 2006
I get an error dialog when I try to create a new SQL database, both via the Add New Item dialog and the property wizard of a new SqlDataSource control. The error is:
Local Database File:
User does not have permission to perform this action.
I've searched for help with this.
I ensured the App_Data folder exists and I added the local ASP.NET account to the group that have R/W access to it (although the RO flag is in an unchangeable tri-state on the folder).
The SQL Server Express error log is clean and indicates full functionality.
Everything is running locally.
No VWD installation errors.
Any ideas?
Thank you!
View 3 Replies
View Related
Mar 1, 2007
Hi. I'm trying to get full-text search working on my SQL 2005 Express with Advanced Services and am having problems. I thought that I installed it correctly, and when I look in the services running, I see it SQL Server Fulltext Search(MSSQLSERVER). Also note that I have SQL Server 2005 Standard installed on this same laptop. I don't know if that Full text Search applies to the Standard, Express or both.
What I do see is that if I connect to the database engine named <mylaptop>, I can see the version is 9.0.1399 and I can see the check box to enable full-text indexing in a particular databases properties. When I run SELECT FULLTEXTSERVICEPROPERTY('IsFullTextInstalled'), I get a 1.
However, when I connect to the engine name <mylaptop>SQLExpress, I se the version is 9.0.3042, and I don't see the same check-box to enable full-text indexing. When I run SELECT FULLTEXTSERVICEPROPERTY('IsFullTextInstalled'), I get a 0.
I've never tried this before so I know I'm probably missing something basic. But, I have searched quite a bit and not found my answer. So, I'm looking to you for help.
Thanks in advance.
John.
View 3 Replies
View Related
Feb 15, 2008
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
here is my web.config file:<?xml version="1.0"?><!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
--><configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<appSettings><add key="EmailFrom" value="webmaster@reaganpower.com"/>
<add key="EmailSubject" value="File Ready for Download!"/><add key="SmtpServer" value=""/>
<add key="MailUser" value=""/><add key="MailPassword" value=""/>
<add key="MailPort" value="25"/><add key="EmailFormatSelected" value="Text"/>
<add key="PageTitle" value="Send It Now!"/><add key="ShareLocalFolderPath" value="H:MIS DepartmentIntranetSendItNowFileStorage"/>
<add key="httpDownloadPath" value="http://misfs/SendItNow/ContentFiles/"/>
<!--
<add key="CurrentTheme" value="CleanBlue" />-->
<add key="CurrentTheme" value="CleanOrange"/></appSettings>
<connectionStrings>
<add name="ConnectionString" connectionString="Data Source=(local)SqlExpress;AttachDbFilename=|DataDirectory|FileShareDB.mdf;Integrated Security=True;User Instance=True"providerName="System.Data.SqlClient"/>
</connectionStrings><system.web><!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.-->
<identity impersonate="false"/>
<roleManager enabled="true"/><compilation debug="true" strict="false" explicit="true">
<assemblies><add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/></assemblies></compilation>
<pages><namespaces>
<clear/><add namespace="System"/>
<add namespace="System.Collections"/><add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/><add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/><add namespace="System.Web"/>
<add namespace="System.Web.Caching"/><add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/><add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/><add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/><add namespace="System.Web.UI.HtmlControls"/>
</namespaces></pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user. -->
<authentication mode="Forms"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>-->
</system.web>
</configuration>
View 2 Replies
View Related
Sep 28, 2007
Hi all,
I want to do SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express and I have read the following articles and books:
(i) Connecting to SQL Express User Instances in Management Studio in http://blogs.msdn.com/sqlexpress/archive/2006/11/22/connecting-to-sql-express-user-insta...
(ii) Managing SQL Server Express with SQL Server 2005 Management Studio Express Edition in http://www.microsoft.com/technet/sql/2005/mgsqlexpwssmse.mspx
(iii) Chapter 16 - Going Beyand Transact-SQL: Using the SQL Common Language Rutime (SQLCLR) in Microsoft SQL Server 2005 Express Edition for Dummies
(iv) Chapter 21 - Working with the Common Language Runtime in Microsft SQL Server 2005 Programming for Dummies
(v) Chapter 4 - Introduction to Common Language Runtime (CLR) Integration in Programming SQL Server 2005 by Bill Hamilton.
I want to create an SQLCLR project "HelloWorld" by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. But I am still not sure how to get it started, because I do not understand the following things:
(1) Pipe Name for a User Instance, (2) Enabling (or Disabling) the CLR by using Transact-SQL, (3) Creating a Transact-SQL script, (4) Creating an Assembly, (5) Creating a backup device, etc. I need to see some simple examples of SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. Please help and tell me where in the websites I can find them.
Thanks in advance,
Scott Chang
View 5 Replies
View Related
Sep 19, 2007
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
View 3 Replies
View Related
Dec 14, 2007
When I start Management Studio I get the following message and a suggestion to change a setting:
(I can choose to continue and the system databases appear, but the DB I created does not.)
"Unhandled exception has occurred in a component in your application. Cannot create a stable subkey under a volitile parent key."
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Any assistance is appreciated.
View 1 Replies
View Related
May 7, 2008
Downloading and installing VS 2008 Express also created a Miscrosoft SQL Server folder. How do I install the SQL Server 2005 Express?The following is what I found from the HELP menu bar of the VS 2008 Express. Where can I find the sqlexpr.exe?
TIA,Jeffrey
To install SQL Server Express To begin installation, double-click sqlexpr.exe. Note: SQL Server Express is available as a self-extracting executable file (sqlexpr.exe) from both the Visual Studio 2005 CD and the SQL Server Express Web site. SQLEXPR.EXE installs on x86-based computers and to the 32-bit subsystem (WOW64). For more information, see Hardware and Software Requirements (SQL Server Express)
View 1 Replies
View Related
Mar 10, 2006
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
View 3 Replies
View Related
Apr 7, 2006
Here is the error message I get:http://img109.imageshack.us/my.php?image=error2ug.jpgI have just installed both packages and havent done much in the way of configuration... What do i need to do? Thanks!
View 2 Replies
View Related
Jan 8, 2008
Hello,
I am trying to "import" a .dbf into SQL Server Compact Edition, but I cannot find a way to do so. Can someone tell me how this is done?
View 1 Replies
View Related
Jan 27, 2006
I have an Excel add-in that connects to a SQL Server Express 2005database. I've decided to create a configuration piece for this add-inin Visual Studio 2005 Express. I added a data connection using the dataconnection wizard and all appeared to go well. Anyways when I attemptto open SQL Server Express to administer the database, it was corruptedand I had to restore it.I eventually got it to work correctly (I'm pretty sure I followedpretty much the same steps as before), but I was just wondering ifanyone had experienced problems like this? I find it a bit scary thatit may be that easy to corrupt the database by just creating a dataconnection.
View 2 Replies
View Related
Apr 29, 2007
Hi, all
I installed SQL 2005 express edition in my pc (Pro XP), then I can login from SQL 2005 Managerment Studio Express. After a few days later, I can't do it and an error message as belows:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
It seems that the default setting does not allow remote connections, however, I connected it before and havn't change any setting. I try to reinstall the studio express but still not working.
Any idea / solution will be welcome.
Kevin Cheang
View 3 Replies
View Related
Jul 28, 2007
Hi,
I had some issues on my server and had to uninstall .Net Framework 2.0, SQL Server 2005 Express, and SQL Express Toolkit. I installed SQL Server 2005 Express and it seemed to be ok.
Then my problems all started when I tried to install SQL Express Toolkit because I needed to install DTS Wizard again, and it errors out and wouldn't let me install it. So I uninstalled everything that's listed above again.
I then tried to install SQL Server 2005 Express again, and on the second from last screen, while its listing all the components and configuring them, I get the following error as it's configuring the last component... which was the SQL Server Database Services.
TITLE: Microsoft SQL Server 2005 Setup
-----------------------------------------------------------
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
I tried to re-install the SQL Server Express another 7 times wth no luck.
If anyone can point me in the right direction I'd really appreciate it.
Thanks,
Bill
View 1 Replies
View Related
Feb 24, 2007
On my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error:
Cannot connect ot MPLIAMSQLEXPRESS
Additional Information:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message.
Please help.
View 12 Replies
View Related
Feb 4, 2006
Looking for help in diagnosing this error:
Unable to open the physical file "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatacartracker.mdf". Operating system error 32: "32(error not found)".
An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatacartracker.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I am using Visual Basic 2005 Express Edition along with SQL Server 2005 Express Edition.
Now here's what I did:
Rather than use the Database Explorer within VB2005 EE to create my database, I thought I would try creating my database externally using the downloadable "SQL Server Management Studio Express" tool. (I figured that if I had a stable data model for my database, I could side-step the copying/overwriting issues that come with creating a database as part of a VB solution.)
So having gotten my database setup and populated with some sample data, I am now trying to connect to it from Visual Basic. In VB (in the context of working on a VB Solution), I do the following:
Select Add New Data Source... from the Data menu to bring up the Data Source Configuration Wizard.
Choose "Database" for the data source type and click Next.
Click "New Connection..." to bring up the Add Connection dialogue.
For data source I choose "Microsoft SQL Server Database File", with ".NET Framework Data Provider..." as the data provider.
Navigate to my existing database file (in "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" folder).
Use Windows Authentication.
When I click "Test Connection" or just click "OK", i get the Microsoft Visual Basic 2005 Express Edition error shown at the top of this message.
Is this occuring because I'm trying to access my database as an .MDF file rather than through Named Pipes / Shared Memory / TCP/IP? If this is the case, is there any way that I can tell VB2005 EE to use Named Pipes / Shared Memory / TCP/IP? Is this a fundamental limitation of VB2005 EE?
Thanks in advance to the guru who is able to explain this to me...
View 8 Replies
View Related
Aug 23, 2006
Really confused ... I created 2 tables in a VB Express program (which went well). Problem is that I can't see/find those tables with MSME. I don't really understand how to connect the MSME to where the tables are. I created the tables under My DocumentsData and they are DBapp.mdf + DBapp_log.LDF and the tables are Items and Preferences. The VB application can "see" the tables OK.
Do I need to move the tables to C:Program FilesMicrosoft SQL ServerMSQL.1MSQLDATA (like the Adventureworks installation which I haven't done) or what?
Please help a newbie
Thanks
George
View 3 Replies
View Related
Mar 8, 2008
Hi,
I'm getting an error while trying to install SQL Server Express 2005 Express Edition. I'm attaching the log of the installation process here. Please throw some light on the same.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlShutDownRANUInstance
PerfTime Start: Do_sqlShutDownRANUInstance : Sat Mar 08 21:39:12 2008
<Func Name='Do_sqlShutDownRANUInstance'>
Service SQLEXPRESS with parameters '' is being started at Sat Mar 08 21:39:12 2008
Unable to start service (3)
Error Code: 0x80070003 (3)
Windows Error Text: The system cannot find the path specified.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls:ervice:tart
Source Line Number: 316
---- Context -----------------------------------------------
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3
MSI (s) (D0!64) [21:39:17:257]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
View 4 Replies
View Related
