Earlier versions of SQL had an icon in the system tray - which was very useful. I cannot seem to find how you activate this in 2005.
Also you could schedule a job MSDE 2000 to, say, backup a database. I can't find how you do this in SQL Express.
Is there any way to configure a notification icon in the start tray in Express 2005 (like we had in SQL Server 2000) with a little green (or red) arrow (or dot) to indicate whether the server's up (or down)?
View 3 Replies View RelatedWhy would some of my servers that I have registered not show a green arrow (or any connection status for that matter). It's just a blank white circle. Is there some sort of connection error happening between me and the server?
It's sort of annoying to click on these servers and have the error "SQL Server xxxx is not known to be running. Are you sure you wish to connect?" Any way to get around that?
Thanks..
Can anybody tell me what the following icon means against the SQL Server Agent in EM. I'll describe as best as I can:
Its the usual pc tower picture, but instead of the usual green arrow or red square at the bottom, I'm getting what looks like a window (its very small, I can't tell exactly).
When I see this icon, I can't see or change the Service Startup Account under properties and EM doesn't seem to know if the service is stopped or started (I get the option to do either - although both fail if I try them)
Any help would be appreciated
Regards
Andy
Is there any way to change the interactive sorting icon or even adjust it? When I add the functionality to a column, it skews the column heading to make room for it. This means that reports that previously displayed properly no longer look correct. If I adjust the width of the report to allow room for the icon, then the report overflows its boundary in terms of printing.
Also, the icon does not display evenly all the time. Sometimes, it displays directly next to the text and sometimes it is off to the right more.
I have seen the red down arrow for disabled, but I don't know what this means?
(I can't post an image is there a way to upload an image?)
It appears to be a little red tornado or down pin?
Hi everyone,
This is a beginner's question: I know that in order to run a package i need to press ctrl_f5 but i also know that there should be an icon (dimmed green arrow) to do that but i cant find it on the toolbar! I only see the "debug" green arrow. Can anyone help me find the lost "play" (or "run") green arrow ? on which toolbar is it situated ?
Thanks
In SQL 2005 when a database is in suspect mode there is no obvious way to tell (via SSMS). In SQL 2000 the word "suspect" was displayed (via Enterprise Manager) next to the database, and the respective database icon was grayed out. Why was this behavior changed for SQL 2005? From a disaster recovery standpoint, it is very important to see immediately if a database is in suspect mode.
View 9 Replies View Related In my installation of RS 2005 when I click the Refresh Icon on a report the report doesnt update. But when I click the "View Report" button it does.
For example, if I change the parameters on the report and click the refresh icon the report seems to flicker as if it was rfreshing but the report data remains the same, even the paramaters in the report remain the same (I have the parameters that are selected in the report header)
Anyone have the same problem or know the solution?
Hi all,
I apologize if this question has already been asked a dozen times, I ran a search and came up with nothing, soooo...
I installed SQL Server 2005 Express Edition SP1 + SQL Management Studio Express.
I attached all my old databases, and setup named pips, tcp/ip, etc, but for some reason, I don't see a SQL 2005 Express Icon in the system tray to indicate to me if the Server is running or not.
now I undestand Express doesn't come with Agent tools, but where on earth is my tray icon? Do I need to download the 'advanced reporting tools' version instead? (about 200mb+)
TIA,
Ray Bolander
Triac Engineering Ltd
In EM, the left pane shows servers, etc. What is the meaning of the red
squiggly line which can apprear on the server icon?
Thanks.
My co-worker, no idiot, says that the tooltip in the system tray forthe SS2000 icon usually shows the computer and server, but once in awhile shows the password (two slashes and the password).Is this a known bug of some sort? It really shouldn't be showing hispassword. It's likely the developer edition, but still, that isn'tgood.
View 2 Replies View RelatedI am getting a general protection fault when pressing the print icon in Reporting Services website.
Hi I found this article:
http://database.ittoolbox.com/groups/technical-functional/sql-server-l/reporting-services-2005-print-icon-causes-machine-to-reboot-1592477
but I can't figure ou how to "remove" the RSClientPrint Class add-on in IE 6.
P.S.
Why does something as simple as printing need to be an ActiveX control? There are all kinds of issues revolving around pushing this out using SMS for users without local admin permission.
So i finally figured out how to create custom transform and add an icon to it. However - when i added the component to toolbox it appears as a file icon (when i didnt have icon it appeared as a blue box) - in the data flow designer it appears as the correct image.
From BOL wrote:"The Data Flow toolbox uses the 16x16, 16-color image type, while
the design surface of the data flow tab uses the 32x32, 16-color image
type. Both are default image types for icons created using Microsoft
Visual Studio 2005."
I assume this has something to do with it - my ico is default 32x32 - however, what would be the way to fix it?
I am adding some KPI-style graphics to a report (BIDS 2005) and for consistency I would like to use the same icons that are available in the Excel 2007 icon sets that are used for conditional formatting in spreadsheets - there's no point in having users learn another set of icons. Are these graphics available anywhere so they can be added as embedded images in a report? Am I missing some other way to do this?
Thanks,
John W.
Hi,
Have two servers, one production server and one backup server. Both are Windows 2003 Server having SQL Server 2000 installed.
I have created replication on these servers using a wizard. I then generated SQL scripts to delete and create the replication. These scripts work well, but to test to remove the replication on both servers I used sp_removedbreplication 'DBNAME' on both servers. Not all were removed and on Replication Monitor and sub items plus Log Reader Agent there were added an icon, a red 'X' as in error. The replication seems to work.
Does anyone have any idea on why this happened and what I can do about it. It is not very nice to have errors in replication on a customers servers.
Grateful for answers
Best,
/M
Hi All
I installed the following in order:
1. .NET Framework Version 1.1 Redistributable
2. .NET Framework Version 1.1 Software Development Kit (SDK)
3. MSDE 2000 Rel A
In the command window I changed to the directory where MSDE 2000 Rel A was installed and typed in this:
setup.exe INSTANCENAME=MyDb DISABLENETWORKPROTOCOLS=1 SAPWD=<My SA PASSWORD>
MSDE installed successfully and the little icon appeared in the system tray, next to the clock. However, there was no little green arrow/triangle showing on the icon to show connection status as Connected.
4. ASP.NET Commerce Starter Kit
During the Starter Kit install a Connect to Database window opened - Connect to SQL or MSDE.
In the 'Server' field the following was automatically displayed:
STEVE-HOME/MyDb
Where STEVE-HOME is the name of my computer (changed from 'localhost') and MyDb is the instance name.
Thw 'Windows Authentication' radio button was selected by default. I left this unchanged, then clicked OK.
A window opened asking to test the connection. I clicked OK and the connection was successful.
(I didn't select the SQL Server authentication or enter a username, password or select a Database.)
The Starter Kit installed successfully and works fine. However, the SQL Server Service Manager icon states it is not connected when I mouse over it.
I opened the SQL Server Service Manager window and the Server and Services fields are blank.
Surely the Starter Kit wouldn't work if MSDE wasn't connected.
Can anyone advise on how to get the icon to show it is connected
Your help would be greatly appreciated.
I tried to open mdf file without any success. Then, all database files icon were changed or grayed out. How can i repair or replace the file to it's original file? ex... the file named "event.mdf" has now a wrong icon not a database icon like before.
View 11 Replies View RelatedHI, there,
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
Thanks
Jack
Hello
I got a sql server express that i am trying to connect form win or web forms(2.0) €“ express as well.
My problem:
Can not connect to the server in any way!
Even the designer cont find any sql server on my machine; for example "the data source configuration manager" (gui) in enyn way its can not find the sql server express (2005)
So my question is:
if all what i used is the express version - is it possible to connect and use the sql.s express form the vs. express
When I downloaded/started using Visual Web Developer I was under the impression that I needed to install SQL Server Management Studio Express in order to create/manage databases, and to provide the engine to access the data.
Since then I have found tutorials and have successfully created/used databases solely from within Visual Web Developer. I'm assuming that Visual Web Developer includes a database engine, much like the webserver that is included. (This is an awesome thing).
When I tried to upload my web application with database to my production server, the database would not work, it started working after I installed SQL Server Management Studio Express on the server.
Is it my understanding that you need SQL Server Management Studio Express if you do not have Visual Web Developer Express installed in order to provide the data access engine?
Also, I am unable to "attach" my Visual Web Developer Express created database to SQL Server Management Studio Express. Are there any posts that provide more information about this topic?
The only reason I'm asking is that I have extra whitespace on the end of my text fields, and I thought ANSI_PADDING was turned on. I do not see the option in Visual Web Developer Express, but have found it in SQL Server Management Studio Express.
Hi all,
In my SQL Server Express (that is installed in my Windows XP Pro PC), SQL Server 2005 Network Configuration has Protocols for SQLEXPRESS. I tried to do "Enabling CLR Integration" in my SQL Server Express: (1) If I clicked on "Surface Area Configuration for Services and Connections", I got an error "An exception occurred in SMO while trying to manage a service, (Microsoft.SqlServer.Smo) Additional information: Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). (2) If I clicked on "Surface Area Configuration for Features, I got a different error "Computer localhost does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required computer has the required Windows Management Instrumentation components and then try again. (SQLSAC) Additional Information: An exception occurred in SMO while trying to manage a service. (Microsoft.SqlServer.Smo). Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). Please help and tell me how I should do to get "Enabling CLR Integration" in my SQL Server Express done and how I can create SQLCLR Project in VB 2005 Express.
Thanks in advance,
Scott Chang
Hi all,
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Thanks in advance,
Scott Chang
Hi all,
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area":
(1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the
following: Select Computer
The Surface Area Configuration of this surface area of this computer or a remote computer.
Specify a computer to configure: O Local computer
O Remote computer
Should I choose the "Local computer" or the "Remote computer" option?
(2) Below the "Configure Surface Area for localhost [change computer]",
I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS
|-| Database Engine
Service
I picked => Remote Connection
On the right-hand side, there are: O Local connections only
O Local and remorte connections
O Using TCP/IP
O Using named pipes only
O Using both TCP/IP and named pipes
Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
Thanks in advance,
Scott Chang
Hi,When I attempt to add the membership functionality to a database created within VWD Express, by using the aspnet_regsql.exe application (connecting to ./SQLEXPRESS using Windows authentication), the database I've created within VWD Express doesn't appear within the list of accessible databases. I have the same problem when attempting to access the same database within Management Studio Express.Does this mean that databases created from within VWD Express don't use the same storage mechanism or paradigm as those already available within Management Studio Express? Or perhaps I need to somehow register the database using Management Studio Express? As a side note, I'm not sure if the "File/Open File" menu option within Management Studio Express holds the answer to my problems, but rather bizarrely, it crashes Management Studio Express when I select it.Apologies for the rambling - in essence my question is "How can I make databases created within VWD Express appear within aspnet_regsql.exe and/or Management Studio Express?"Many thanks,Jon
View 6 Replies View Related hii download free starter kit timetraker application( i downloaded both Visual web devaloper and sql server express from the Internet) when i tried to run it it is showing the following errorAn error has occurred while establishing a connection to
the server. When connecting to SQL Server 2005, this failure may be
caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: Shared Memory Provider, error: 40
- Could not open a connection to SQL Server)plz give me the solution above error thanks in advance vittal
I am having the same problem as Michael, with the exception that my laptop is running windows XP SP2.
BUT when I look at the SETUP LOG FILE there is NOTHING in it. This is what I get:
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Tue Apr 03 19:36:54 2007
(LAPTOP NAME HERE) : Unknown article Result.
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Tue Apr 03 19:36:56 2007
(As you can see, there is nothing in the file)
Any ideas what could be wrong?
Thanks
Pedro
Hi
I have VC++ express and MSSQL SMS express and have an application working nicely locally. The Data explorer and data connections part works really easily.
Now, I want to make the application available to my home network.
I mapped the drive where the database is and called it Z: so I could put my "release" on my other network PC and assumed it would find Z: if I mapped the shared network drive on that machine and called it Z:
But: I can't even add the mapped connection on the local machine, I get:
The file "Z:databasescalorie.mdf" is on a network path not supported for database files. An attempt to attach.....etc"
It works fine on the original F drive.......
Am I approaching this the wrong way. How should I distribute to network PCs?
thanks hopefully
David
I have uninstalled the SQL Server Express Edition that I have installed from the CDs that were given to me during a Chicago Conference when READY TO LAUNCH Visual Studio 2005, SQL SERVER 2005, and Biz Talk 2005.
Then I went to microsoft website: http://msdn.microsoft.com/vstudio/express/sql/register/default.aspx and downloaded and installed the so called Microsoft SQL Server 2005 Express Edition and I got the messages Error that you read below. Then I Uninstalled Microsoft SQL Server 2005 Express Edition and went again to msdn website and downloaded Microsoft SQL Server 2005 Express Edition Advanced Services SP1 and installed it. I got again the same message as below.
MESSAGE:
1. First comes a window with the title: €œsetup.exe €“ Unable to Locate Component€?
And it displays a message:
This application has failed to start because MSTDCPRX.dll was not found.
Re-installing the application may fix this problem.
2. After I click the OK button of this window it comes another window with the title: €œMicrosoft SQL Server 2005 Server Setup€?
And it displays a message: Failed to load SqlSpars.dll
Does anybody can tell what is going on with the 3 times I tried to installed different SQL Server 2005 Express Edition and I get the same message?????
Thanks for your help and support when you have time to respond.
Sincerely,
TonyC
MORE INFORMATION ON THE:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFiles
1. C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core.txt
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 87
Aborting queue processing as nested installer has completed
Message pump returning: 87
2. C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core(Local).txt Running: InvokeSqlSetupDllAction at: 2007/1/20 1:22:8
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution.
Unable to load setup helper module : 87
Message displayed to user
Failed to load SqlSpars.dll
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_.NET Framework 2.0.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0001.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2007/1/20 1:22:17
Message pump returning: 87
3. C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Datastore.xml
<
<S,<Scope Type="SetupStateScope" Id="">
<Property Id="machineName">B3-XP</Property>
<Property Id="logDirectory">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOG</Property>
<Property Id="logSummaryFilename">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt</Property>
<Property Id="logSequenceNumber">1</Property>
<Property Id="primaryLogFiles">{ ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_.NET Framework 2.0.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Support.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_B3-XP_Core(Local).log"] }</Property>
<Property Id="watsonFailedAction">InvokeSqlSetupDllAction</Property>
<Property Id="watsonFailedActionErrorCode">87</Property>
<Property Id="watsonFailedFunction">sqls::InvokeSqlSetupDllAction::perform</Property>
<Property Id="watsonFailedFunctionErrorCode">87</Property>
<Property Id="watsonSourceFileAndLineNo">setupsqlsetupactions.cpp@1709</Property>
<Property Id="watsonModuleAndVersion">setup.exe@2005.90.3042.0</Property>
<Property Id="watsonMsi">None</Property>
<Property Id="watsonMsiAndVersion">None</Property>
<Property Id="watsonSourceFile">setupsqlsetupactions.cpp</Property>
</<Scope>
Hi,
I am a newbie so i apologies beforehand for any mistakes i make on this forum.
Anyway, i created an asp.net website using the MS Visual Web developer tool. This has a couple of SQL SERVER databases within it.
I then latervinstalled the SQL SERVER management studio express in order to manage the SQL SERVER DBs that i had as part of my website but they do not appear within the management studio db list.
As this is the express version, is there anyway of importing the existing SQL SERVER dbs that i have to the management studio so i can manage them from there?
Regards,
Shuja.
Everything was working fine. I have been able to connect using windows authentication. Then, I went into the ODBC manager to add a data source and it failed to connect so I went back into the Server management studio to modify users. After doing this I now get an error when I try to conenct the management studio to the SQL server.
I wasn't modifying the login for my windows account that I normally use, I was modifying a different one, however I now get the message "An error has occured while establishing a connection to the SQL server. This kind of problem can ocure because the default behavior of the server does not support all connection methods" blah blah.
Does anyone know how I can attach to the server? Or, do I need to somehow remove the server and create a new one? How would I do that?
Thanks in advance for any input.
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server
When I try to do it I recive the following message:
____________________________________________________________________________________
System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------
Program Location:
in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
____________________________________________________________________________________
What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
Am running vista premium and am trying to complete the installation of Office 2007 Professional (disc 2) and keep getting an error message that SQL Service 2005 (Express) cannot install. Logfile below:
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Home Edition (Build 6000)
Time : Sun Mar 04 15:25:13 2007
Machine : MICHAELTODD-PC
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : MICHAELTODD-PC
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : MICHAELTODD-PC
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.3042.00
Install : Successful
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : MICHAELTODD-PC
Product : SQL Server Database Services
Error : SQL Server Setup Failed to compile the Managed Object Format (MOF) file c:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof. To proceed, see "Troubleshooting an Installation of SQL Server 2005" or "How to: View SQL Server 2005 Setup Log Files" in SQL Server 2005 Setup Help documentation.
--------------------------------------------------------------------------------
Machine : MICHAELTODD-PC
Product : SQL Server Database Services
Error : SQL Server Setup Failed to compile the Managed Object Format (MOF) file c:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof. To proceed, see "Troubleshooting an Installation of SQL Server 2005" or "How to: View SQL Server 2005 Setup Log Files" in SQL Server 2005 Setup Help documentation.
--------------------------------------------------------------------------------
Machine : MICHAELTODD-PC
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.1.2047.00
Install : Failed
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQL.log
Last Action : InstallFinalize
Error String : SQL Server Setup Failed to compile the Managed Object Format (MOF) file c:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof. To proceed, see "Troubleshooting an Installation of SQL Server 2005" or "How to: View SQL Server 2005 Setup Log Files" in SQL Server 2005 Setup Help documentation.
Error Number : 29513
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Sun Mar 04 15:27:03 2007
List of log files:
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_Core(Patched).log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQLSupport_1.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQLNCLI_1.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SqlWriter_1.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SQL.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_Datastore.xml
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_.NET Framework 2.0.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_Support.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_Core.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_MICHAELTODD-PC_SCC.log