MS SQL Server :: SQL Express - Monitor Commands

Replication Monitor Undistributed Commands Tab

Oct 16, 2007

Hi,

We're testen a simple lan SQL 2005 SP2 one way transactional replication config.
Data is replicated ok, but in the Replication Monitor we found some strange issues:

- The subscription is giving a latency warning.
When we insert a tracer tocken the total latency is 5 secs.
Is there a way to alter the warning level for a subscription??

- Undistributed Commands tab
Changes do arrive at the client, but the distributed commands counter
shows an increase in value for every (as far as we can tel succesfull) change

If we do insert a tracer token -wich arrives within 5secs.- the the
counter is reset to zero.

thank you very much for any feedback

Derk Jan

View 7 Replies View Related

SQL 2005 Express Commands

Dec 4, 2005

Hi there! I just installed SQL 2005 Express and would like to use the command prompt to interact with my database such as creating/deleting etc. How do I start the SQL command terminal from command prompt? A tutorial website would be great! Thanks!

View 1 Replies View Related

Unable To Use Some Commands In 2005 Express

Feb 29, 2008

Hi all, I'm having some trouble getting commands to be available. Certain commands are grayed out, and i'm assuming not working.

For example I copied this code from online:

SELECT h.USERID, c.KEY1,
CASE srectype
WHEN 'A' THEN 'Appointments'
WHEN 'C' THEN 'Calls'
ELSE 'Nothing'
END AS ContactType,
COUNT(h.USERID) AS Total_Contacts,
COUNT(CASE WHEN resultcode BETWEEN 0 AND 4 THEN 1 ELSE NULL END) AS Contacts_Made,
COUNT(CASE WHEN resultcode = 4 THEN 1 ELSE NULL END) AS Sales
FROM CONTHIST h INNER JOIN
CONTACT1 c ON h.ACCOUNTNO = c.ACCOUNTNO
WHERE (h.USERID = @userident)
AND (h.ONDATE BETWEEN @startdate AND @enddate)
AND (h.SRECTYPE IN ('A', 'C'))
GROUP BY h.USERID, c.KEY1, h.SRECTYPE
ORDER BY h.USERID, c.KEY1, h.SRECTYPE

http://www.codeguru.com/forum/showthread.php?t=372235

From that bit of code the following commands are gray:
BETWEEN
AND
NULL
INNER JOIN
IN

I can only assume that i'm doing something fundamentally wrong. Is there a setting i'm missing in SQL Server Managment Studio EXpress to make these available? Do I need to 'import' anything?

TIA

View 3 Replies View Related

What Is Going On Here? SQL Commands And ODBC Commands Aren't Compatible

Oct 1, 2004

I'm building a simple webform, except Visual Studio and my service provider have combined to drive me nutty.

First, I MUST use an ODBC connection to my remote SQL Server do to some unknown configuartion problem. I've been playing with Visual Studio for only a month, so normally when something goes wrong I can go look in the mirror and find the culprit. This is different. I've got a totally functional web form with a SQL Connection, but when I try to change it to an ODBC Connection, I get the following error.

An OdbcParameter with ParameterName '@CertHolder' is not contained by this OdbcParameterCollection

My coding is fine because I stole it straight from the walkthrough and it works. But the specifications that Visual Studio provide are quite suspect. Please note the failure to include some key "@" signs.

#Region " Web Form Designer Generated Code "

'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection
Me.cmdUpdate = New System.Data.SqlClient.SqlCommand
Me.cmdGetAll = New System.Data.SqlClient.SqlCommand
Me.cmdSelect = New System.Data.SqlClient.SqlCommand
Me.OdbcConnection1 = New System.Data.Odbc.OdbcConnection
Me.OdbcGetAll = New System.Data.Odbc.OdbcCommand
Me.OdbcSelect = New System.Data.Odbc.OdbcCommand
Me.OdbcUpdate = New System.Data.Odbc.OdbcCommand
'
'SqlConnection1
'
Me.SqlConnection1.ConnectionString = "this works fine"
'
'cmdUpdate
'
Me.cmdUpdate.CommandText = "UPDATE InsuranceData SET Name = @Name, Address = @Address, Address2 = @Address2, " & _
"City = @City, State = @State, Zip = @Zip, CertHolder = WHERE (CertHolder = @Cert" & _
"Holder)"
Me.cmdUpdate.Connection = Me.SqlConnection1
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Name", System.Data.SqlDbType.NVarChar, 50, "Name"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Address", System.Data.SqlDbType.NVarChar, 50, "Address"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Address2", System.Data.SqlDbType.NVarChar, 50, "Address2"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@City", System.Data.SqlDbType.NVarChar, 50, "City"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@State", System.Data.SqlDbType.NVarChar, 50, "State"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Zip", System.Data.SqlDbType.NVarChar, 50, "Zip"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@CertHolder", System.Data.SqlDbType.NVarChar, 50, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "CertHolder", System.Data.DataRowVersion.Original, Nothing))
'
'cmdGetAll
'
Me.cmdGetAll.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData"
Me.cmdGetAll.Connection = Me.SqlConnection1
'
'cmdSelect
'
Me.cmdSelect.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData W" & _
"HERE (CertHolder = @CertHolder)"
Me.cmdSelect.Connection = Me.SqlConnection1
Me.cmdSelect.Parameters.Add(New System.Data.SqlClient.SqlParameter("@CertHolder", System.Data.SqlDbType.NVarChar, 50, "CertHolder"))
'
'OdbcConnection1
'
Me.OdbcConnection1.ConnectionString = "This works fine"
'
'OdbcGetAll
'
Me.OdbcGetAll.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData"
Me.OdbcGetAll.Connection = Me.OdbcConnection1
'
'OdbcSelect
'
Me.OdbcSelect.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData W" & _
"HERE CertHolder = @CertHolder"
Me.OdbcSelect.Connection = Me.OdbcConnection1
Me.OdbcSelect.Parameters.Add(New System.Data.Odbc.OdbcParameter("CertHolder", System.Data.Odbc.OdbcType.NVarChar, 50, "CertHolder"))
'
'OdbcUpdate
'
Me.OdbcUpdate.CommandText = "UPDATE InsuranceData SET Name = @Name, Address = @Address, Address2 = @Address2, " & _
"City = @City, State = @State, Zip = @Zip WHERE CertHolder = @CertHolder"
Me.OdbcUpdate.Connection = Me.OdbcConnection1
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Name", System.Data.Odbc.OdbcType.NVarChar, 50, "Name"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Address", System.Data.Odbc.OdbcType.NVarChar, 50, "Address"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Address2", System.Data.Odbc.OdbcType.NVarChar, 50, "Address2"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("City", System.Data.Odbc.OdbcType.NVarChar, 50, "City"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("State", System.Data.Odbc.OdbcType.NVarChar, 50, "State"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Zip", System.Data.Odbc.OdbcType.NVarChar, 50, "Zip"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Original_CertHolder", System.Data.Odbc.OdbcType.NVarChar, 50, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "CertHolder", System.Data.DataRowVersion.Original, Nothing))

I NEVER EVER TYPED ORIGINAL_CERTHOLDER IN THE SQL PREPARATION

End Sub
Protected WithEvents btnSave As System.Web.UI.WebControls.Button
Protected WithEvents SqlConnection1 As System.Data.SqlClient.SqlConnection
Protected WithEvents ddlCertHolder As System.Web.UI.WebControls.DropDownList
Protected WithEvents txtName As System.Web.UI.WebControls.TextBox
Protected WithEvents txtAddress As System.Web.UI.WebControls.TextBox
Protected WithEvents ddlCH As System.Web.UI.WebControls.DropDownList
Protected WithEvents cmdUpdate As System.Data.SqlClient.SqlCommand
Protected WithEvents cmdGetAll As System.Data.SqlClient.SqlCommand
Protected WithEvents cmdSelect As System.Data.SqlClient.SqlCommand
Protected WithEvents txtAddress2 As System.Web.UI.WebControls.TextBox
Protected WithEvents txtCity As System.Web.UI.WebControls.TextBox
Protected WithEvents txtState As System.Web.UI.WebControls.TextBox
Protected WithEvents txtZip As System.Web.UI.WebControls.TextBox
Protected WithEvents OdbcConnection1 As System.Data.Odbc.OdbcConnection
Protected WithEvents OdbcGetAll As System.Data.Odbc.OdbcCommand
Protected WithEvents OdbcSelect As System.Data.Odbc.OdbcCommand
Protected WithEvents OdbcUpdate As System.Data.Odbc.OdbcCommand

'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object

Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub

#End Region

Comments? Suggestions, I am not positive about how to fix this.

View 2 Replies View Related

Setup And Upgrade :: Activity Monitor Shuts Down If Connect To Instance Its Monitoring With Performance Monitor

Aug 19, 2015

If I'm on a remote machine, meaning a computer not in the WSFC cluster, and I open SSMS 2014, point it to a SQL Instance, and open activity monitor:

1. I get all the panes and charts except % Processor Time.

2. Then, if I authenticate to the cluster's domain by mapping a drive with valid domain credentials, I'm free to put performance counters in the Perfmon - - - but SQL Activity Monitor shuts down with“The Activity Monitor is unable to execute queries against server SQL-V01INSTANCE1..Activity monitor for this instance will be placed into a paused state.Use the context menu in the overview pane to resume the activity monitor.

Additional information: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))(Mscorlib)”

3. Of course, the Activity monitor can't be resumed via the context menu. Removing counters and closing the perfmon do not work. I dropped the mapped drive and rebooted the machine. That brought back 95% of the information in the Activity monitor.

4. Further experimentation showed that any mapping of drive shares present on the SQL Server to the computer running SSMS cut off functionality of the 'overview' pane in the remote machine's SQL Activity monitor -- the monitor that had been trying to watch the server offering the shares.

View 4 Replies View Related

Red X Show On Replication Monitor (publications Is Disconnected From Replication Monitor)

Jan 30, 2007

I have setup transactional replication everything on one box. later(two or three weeks later), Replication monitor is show red X Under my publishers (publications is disconnected). this is SQL2005.

Everyone known how to fix this problem?

Thanks,

Frank

View 1 Replies View Related

Commands

Jan 7, 2008

Hi All,

I have these two commands that I execute at the end of my stored procedure. I get an email every time I execute this stored procedure whether the select statement returns a value or not. But I only want to get an email if select statement returns an Error value. How can I accomplish this?

set @cmd = 'osql -S server -U user -P psswd -q "set nocount on; select distinct(rtrim(col1)) from ##table where datediff(dd,col2,getdate()) = 1 and (col1 like ''%Error: %'')" -h-1 -w 1025 -o J:MyFolderErrorLogMsg.txt'

EXEC master.dbo.xp_cmdshell @cmd, no_output

SET @email = 'mailsend -f someone@mymail.com -d -smtp -t someone@mymail.com -sub "Error Log Errors" -m J:MyFolderErrorLogMsg.txt'

EXEC master.dbo.xp_cmdshell @email, no_output

Thanks.

View 2 Replies View Related

Commands

Jan 7, 2008

Hi All,

I have these two commands that I execute at the end of my stored procedure. I get an email every time I execute this stored procedure whether the select statement returns a value or not. But I only want to get an email if select statement returns an Error value. How can I accomplish this?

set @cmd = 'osql -S server -U user -P psswd -q "set nocount on; select distinct(rtrim(col1)) from ##table where datediff(dd,col2,getdate()) = 1 and (col1 like ''%Error: %'')" -h-1 -w 1025 -o J:MyFolderErrorLogMsg.txt'

EXEC master.dbo.xp_cmdshell @cmd, no_output

SET @email = 'mailsend -f someone@mymail.com -d -smtp -t someone@mymail.com -sub "Error Log Errors" -m J:MyFolderErrorLogMsg.txt'

EXEC master.dbo.xp_cmdshell @email, no_output

Thanks.

View 2 Replies View Related

Sql Commands

Jan 13, 2004

How can I get all SQL commands in SqlServer? How can I trace this commands?

Thansk

View 1 Replies View Related

SET Commands

Feb 8, 2006

Hello,

I finally got access to Northwind/pubs.

I would like to know when and why do we use the following set commands. The SQL Server BOL does not say why and when to use these commands.

Thanks in advance!!!
sqlnovice123

Option Default Setting
Set nocount OFF
Set rowcount 0
Set ansi_nulls ON
Set quoted_identifier ON

View 3 Replies View Related

2 SQL Commands In One Action

Nov 29, 2007

Hi guys,I wanna ask bout the problem with my web application. I'm doing a select a statement from table 1 and and with the query results i got, i need it to store the result on table 2. How will i do this? I need your tips and suggestions.

View 1 Replies View Related

Multiple SQL Commands At Once

Jan 8, 2006

I'm running asp.net 2.0 and acessing MSSQL 2K. I am trying to run a query in which I need to set up variables first. I tried the following group of commands as shown, passing it to the SqlDataReader object, but it failed.. does anyone know how i can pass multiple SQL commands? MainQuery = "declare @MinGrades as Table(GradeID Bigint) " & _ " INSERT @MinGrades SELECT MIN(CreditGrades.SplitID) AS Expr1" & _ " FROM CreditGrades INNER JOIN" & _ " CreditGradeSplits ON CreditGradeSplits.CreditGradeSplitID = CreditGrades.SplitID " & _ " WHERE (CreditGrades.x0x30 = - 1 OR " & _ " CreditGrades.x0x30 >= 0) AND (CreditGrades.x1x30 = - 1 OR " & _ " CreditGrades.x1x30 >= 0) AND (CreditGrades.x2x30 = - 1 OR " & _ " CreditGrades.x2x30 >= 0) AND (CreditGrades.x3x30 = - 1 OR " & _ " CreditGrades.x3xNOD >= 0) " & _ " GROUP BY CreditGradeSplits.CreditGradeGroupID" & _ " Select * from @MinGrades "

View 2 Replies View Related

SQL Commands Disappearing!?!?!?!

Nov 7, 2001

I am experiencing a situation where I issue a lengthy SQL command to MS SQL Server 7.0 through MTS and it "disappears" - no errors or recordsets are returned. The command is "SELECT * FROM CUSTOMERS WHERE LASTNAME LIKE 'SMITH%'". When I issue this command from SQL Query Analyzer it takes 27 seconds to return 87 rows. When I issue this exact same command through MTS it does not return at all.

I've used the SQL Profiler to analyze the requests. It shows the commands from MTS starting but they never stop (or at least the profiler never reports them as stopping). The same commands coming from Query Analyzer are reported as starting and stopping without fail.

Here's a twist: I can issue less demanding commands (ie, one that doesn't take so long to process) through MTS and they come back fine. For example, when a user logs into my application, I use an SQL statement to verify the user name and password and status the user as logged in. This is routed through MTS and it comes back fine in less than a second. Same application, same PC, same MTS and SQL server, same SQL database. The only difference is that the CUSTOMERS table has over 800,000 records and the USERS table has only 5 records.

PLEASE HELP!

View 1 Replies View Related

Using The DBCC Commands

Jul 26, 2004

Hi,

I am very new to sql server and I have been reading up on the dbcc commands. For instance, DBCC SHOWCONTIG where do I execute this command? I went into the cmd prompt and opened osql and typed:
1> DBCC SHOWCONTIG
2> GO

This gives me the information for what I assume is the master database. But, how do I use this command under the other databases?

Also, I have been trying to learn how to determine when to do index maintenance by using the index tuning wizard. But, I don't know what a workload is. Can someone point me in the right direction or give me some information about this topic.

Thanks,
Laura

View 5 Replies View Related

Normalizing Using Sql Commands

Aug 28, 2006

Hi

Please can someone point me in the direction, i built a very badly designed database consisting of only one huge table when i first started databases, since learning about normalization i have designed and set up a new database which consists of many more tables instead of just the one. My question is where do i start in transfering the data from the old single tabled database to my new multi-tabled database?

I have MS SQL server 2005 managment studio if that helps, but want to transfer around 200,000 rows of data into the new database. Both new and old databases are on the same server.

thanks in advance

View 11 Replies View Related

Run Commands Only Between Hours

Feb 29, 2012

I have a job that runs between the hours of 10 PM and 9 AM. It launches a controller stored procedure that will call other stored procedure until the entire process is done.I would like the controlling stored procedure to only call the steps between the hours of 10PM and 9AM also.. So at 8:59 AM it will start the next step, but at 9:00 AM it will exit.

View 6 Replies View Related

Undeleveired Commands

Nov 4, 2007

hi all
when i set up a new subcription ,i notice in hte replication monitor thet this subscription 'uninitialize subscription' and the are 70 undelevier commands.

how can i fixed this problem,or how can i remove those undeleveirs commands?

thanx

View 1 Replies View Related

Log All Commands Executed In QA

Jul 23, 2005

Hi All,Is there way that commands executed in the query analyzer get loggedautomatically?TIAJoriz

View 3 Replies View Related

Output Of Sql Commands

May 19, 2006

Hi,

Suppose there are two tables employee and salary and a,b are two instances of tables employee and salary.There are 20 records in each table.Then what will be the result of the following query

select a.*, b.* from employee a, salary b.

regards

arun

View 3 Replies View Related

Commands That Cannot Be Used With Mirroring

Feb 6, 2007

Hi al,

Are there commands that are not supported when mirroring is active? (truncate table, bcp, set identity insert on/off etc.)

View 8 Replies View Related

DBCC Commands

Aug 7, 2007

Hi

Can we use
DBCC CHECKIDENT ('dbo.MyTable', RESEED, 0)
Command in Stored procedure. Which executes daily.

Thanks
Sridhar K

View 4 Replies View Related

Behind The Scenes SQL Commands

May 25, 2006

Hello, I am running SQL 2000 SP4 on a Windows 2003 standard edition server.

The SQL database gets changed/updated through a web interface. I was wondering if there was any way for me to see which SQL commands were being run on the database when changed like deleting/inserting users are being applied from the Web frontend?

Any help is appreciated, thanks.

Robert

View 1 Replies View Related

How SQL Commands Get Executed?

Apr 17, 2007

When we send any SQL command to database engine , how exactly it gets executed?

View 7 Replies View Related

Integrity With Multiple Commands

Aug 10, 2006

How can I make sure that a couple of commands are either all executed on the database or none of them. For example right now I have an insert, update and delete command. I'm calling each of them with a SqlCommand. So I am afraid that that one of them might be executed, then there's a bad connection and the other two are not. How can I prevent this so that only all commands or nothing is executed on the database?

View 2 Replies View Related

Two Update Commands For A SqlDataSource?

Jan 16, 2008

Is there a way to have two sql update commands so I can use both during an update depending on which row it is?

View 1 Replies View Related

Retrieving Database DDl Commands

Mar 25, 2008

Hi everyoneI created a database graphically in VS2005.Now I want the text version of those DDL(create) commands. Question is where and how are those commands stored in SqlServer I have the management studio too. Any ideas??

View 2 Replies View Related

Questions On SQL Join Commands

Mar 29, 2008

Please forgive me if my questions seem very simple. I'm trying to pick up vb.net, asp.net, and SQL all at the same time, and while making progress in some areas I'm finding other questions I have harder to figure out where to look for answers.
First question - if I want to join 2 tables do the fields I'm joining on have to have the same name? I know they have to be of the same type, but does the name itself matter? For instance in this line of code I try to join forums
objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON msg_forums.forum_moderators = users.user_ID"
Second question nagging at me, since I specify the table <msg_forums and users> before the field names <forum_moderators and user_ID> does it matter which one comes first? See, my primary table in this line is msg_forums, so do I have to specify it's field first, or does that even matter (or do I have it backwards and need to specify the other one first)?
Last question, and of course the root of what's caused me to wonder about all of this. I'm getting an error similar to some of what I found in the forums, but it's slightly different in that it says there is a problem near "OR". As far as I can tell I've written this correctly, and so, I'm stumped. Here is the error followed by the code. Thanks a bunch for any assistance anyone offers. :-) Incorrect syntax near the keyword 'ON'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'ON'.
'This time trying to learn an adapter instead of a reader, will also try a join
'Build the connectionDim StrConnection As String = (System.Configuration.ConfigurationManager.AppSettings("DbConnect"))
Dim objConnection As New SqlConnection(StrConnection)Dim objdataadapter As New SqlDataAdapter()
Dim objdataset As New DataSet()
'set the SelectCommand Properties objDataadapter.SelectCommand = New SqlCommand
objdataadapter.SelectCommand.Connection = objConnection
'try after renaming to fields to match
objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON msg_forums.user_ID = users.user_ID"
'Try without specifying the table
'objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON user_ID = user_ID"
'Original attempt
objdataadapter.SelectCommand.CommandText = "select * from msg_forums" & "JOIN users ON msg_forums.forum_moderators = users.user_ID"
objdataadapter.SelectCommand.CommandType = CommandType.Text
'open the database connection
objConnection.Open()
'Fill the dataset with object data giving the dataset to use and the table name (primary table even when pulling from a couple)objdataadapter.Fill(objdataset, "msg_forums")
'close connection
objConnection.Close()
'Set DataGridView properties
grdforums.AutoGenerateColumns = True
grdforums.DataSource = objdataset
grdforums.DataMember = "msg_forums"End Sub
End Class

View 2 Replies View Related

New To Ms Sql Having Trouble With Very Basic Commands

Jan 21, 2004

I'm more used to mysql, which i haven't coded for a while, but how do you show tables? or show databases you have available from the osql prompt?

View 3 Replies View Related

Load And Unload Commands

Nov 30, 1999

How do you load and unload data using the commands load and unload in SQL Server? I am using UNIX Script to call isql.exe

Ex:
This code gives an error of "Incorrect syntax near keyword 'to'
unload to '/tmp/lot/test.unl'
select * from test
go

View 1 Replies View Related

Undistributed Commands Not Decrementing

Apr 7, 2008

I was pointed to this forum by one of the admins who has started doing some consulting work for us. We did a major conversion over the weekend for our main production server to SQL 2005 from SQL 2000. We have used replication to go from the live OLTP server to a few dedicated report servers for all of our reporting needs. In 2000 this was pretty well established (though a pain when we had to migrate in changes; I love the 2005 schema features for replication).

The only problem we have really encountered today, the Day After, involves replication. A few minor things involve lack of knowledge (like nonclustered indexes don't replicate by default, that was an OOPS). But one thing I haven't figured out yet.

Replication is working -- we are updating three servers, and all three servers are getting updates. I have run a validation on one of them and it passed in full. However, the "undistributed commands" count never goes down. It actually keeps going up and up. I verified that by first running this on the subscriber:

select transaction_timestamp
from MSreplication_subscriptions

And taking the results of one of the three rows that came back and executing this with it:

sp_browsereplcmds @xact_seqno_start = '0x00000231000006ED000100000001'

which brought back all of the "undistributed commands". Within that list, I looked for sp_MSins_ procedures. I found a few and looked up on the subscriber the value to be inserted -- and it existed on the subscriber. So it still is in MSrepl_commands even though it has been sent out.

I am afraid that eventually the system will "think" that the process isn't working and deactivate the subscriptions. Also this is useless as a monitor. Since this is our first major replication in 2005, I am willing to bet that we are missing something. Does anyone have any advice?

View 1 Replies View Related

SQL Commands For Selected Date

May 9, 2008

I want to display the data in a datasheetview in ms access project.
The data is between particular date. What command should i used for this?

My form contailn feilds : UserId,FromDate,ToDate

Enter the userid & Particular date & after click on submit data for that period should display in datasheet view.

Please help me in this as soon as possible.

View 2 Replies View Related

Sql Commands Don't Update Tables

Mar 28, 2007

Visual Studio 2005
i have insert and update statements. they don't produce any errors but no
changes happen in my tables. are there any possible reason for this. i used
sqlcommand and even stored procedures but still the same.

View 18 Replies View Related