SQL HELP! Msg 4104, Level 16, State 1, Line 1 - The Multi-part Identifier Error

Sep 7, 2006

Hi chaps,

I have the following SQL query (SQL 2005).
Its basically retrieving some values using simple joins.
However there appears to be a problem with the LEFT OUTER JOIN:
"LEFT OUTER JOIN DDDispatchedOrder ON (OrderLineItemTransaction.OrderLineItemTransaction ID = DDDispatchedOrder.OrderItemTransactionID)
"
When I try to compile the code i Get :
Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "OrderLineItemTransaction.OrderLineItemTransactionI D" could not be bound.

Any help would be appreciated.

Cheers
Bal

SELECT
ord.orderDate,
cc.forename + ' ' + cc.surname person,
prod.description,
oli.noofitems,
deladdr.housenameno + ' ' + deladdr.addressLine1 + ' ' + deladdr.addressLine2 + ' ' + deladdr.city + ' ' + deladdr.postcode + ' ' + deladdr.county + ' ' + deladdr.country deladdress
FROM
product prod,
OrderLineItem oli,
[Order] ord,
OrderTransaction ordT,
OrderLineItemTransaction oliT,
CustomerContact cc,
Customer cust,
DDDispatchedOrder dd,
address deladdr,
address invaddr
LEFT OUTER JOIN DDDispatchedOrder ON (OrderLineItemTransaction.OrderLineItemTransaction ID = DDDispatchedOrder.OrderItemTransactionID)
WHERE
prod.productID = oli.productID:eek:
AND ord.orderID = oli.orderID
AND ord.orderID = ordT.orderID
AND oliT.orderlineitemID = oli.orderlineitemID
AND cc.customercontactID = ord.customercontactID
AND cc.customerID = cust.customerID
AND ord.invoiceaddressID = invaddr.addressID
AND ord.deliveryaddressID = deladdr.addressID
AND ordT.dispatchTypeID = 2

View 7 Replies


ADVERTISEMENT

Msg 4104 Level 16 The Multi-part Identifier X Could Not Be Bound.

Sep 7, 2007

this is so stupid and simple and I am annoyed over having to spend so much on this silly simple stuff.
I am sure I am just making a silly mistake.
I am trying to remove records from one table. The table holds 19000 something records.
To determine WHICh records to delete, I have another table that contains the 45 I want to delete.
So I wrote this very simple query
Delete from tbl_X
where tbl_X.FieldA = tbl_Y.FieldA;

The message I get is:
Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "tblY.FieldA" could not be bound.

Please tell me I am stupid!
Thanks!

View 8 Replies View Related

Can't Access Inserted Table From Trigger; Msg 4104 The Multi-part Identifier ... Could Not Be Bound.

Sep 27, 2006

I'm a newbie have trouble using the "inserted" table in a trigger. When I run these SQL statements:CREATE DATABASE foobarGOUSE foobar GOCREATE TABLE foo ( fooID int IDENTITY (1, 1) NOT NULL, lastUpdated datetime, lastValue int, PRIMARY KEY(fooID))GOCREATE TABLE bar ( barID int IDENTITY (1, 1) NOT NULL, fooID int NOT NULL, [value] int NOT NULL, updated datetime NOT NULL DEFAULT (getdate()), primary key(barID), foreign key(fooID) references foo (fooID))GOCREATE TRIGGER onInsertBarUpdateFoo ON Bar FOR INSERTAS UPDATE Foo SET lastUpdated = inserted.updated, lastValue = inserted.[Value] WHERE foo.fooID = inserted.fooIDGO

I get the error message:

Msg 4104, Level 16, State 1, Procedure onInsertBarUpdateFoo, Line 4
The multi-part identifier "inserted.fooID" could not be bound.

I can get the trigger to work fine as long as I don't reference "inserted".

What am I missing?

I'm using Microsoft SQL Server Management Studio Express 9.00.2047.00 and SQL Express 9.0.1399

Thanks in advance for your help...
Larry

View 7 Replies View Related

Msg 4104, Level 16, State 1, Line 1 In Update Query

Feb 25, 2008

Msg 4104, Level 16, State 1, Line 1

The multi-part identifier "dbo.JOB40115_Cost_Actindx.ACTINDX" could not be bound.



UPDATE dbo.JOB40115 set dbo.JOB40115.JOB_Cost_Index = dbo.JOB40115_Cost_Actindx.ACTINDX

SELECT JOB40115.ProjctID, JOB40115.SubLevel1, JOB40115.SubLevel2, JOB40115.CostCategorie, JOB40115.DepartementID, JOB40115.JOB_Cost_Index,

JOB40115_Cost_Actindx.ACTINDX, JOB40115_Cost_Actindx.ProjctID AS Expr1, JOB40115_Cost_Actindx.SubLevel1 AS Expr2,

JOB40115_Cost_Actindx.SubLevel2 AS Expr3, JOB40115_Cost_Actindx.DepartementID AS Expr4,

JOB40115_Cost_Actindx.CostCategorie AS Expr5

FROM JOB40115 INNER JOIN

JOB40115_Cost_Actindx ON JOB40115.ProjctID = JOB40115_Cost_Actindx.ProjctID AND

JOB40115.SubLevel1 = JOB40115_Cost_Actindx.SubLevel1 AND JOB40115.SubLevel2 = JOB40115_Cost_Actindx.SubLevel2 AND

JOB40115.CostCategorie = JOB40115_Cost_Actindx.CostCategorie AND JOB40115.DepartementID = JOB40115_Cost_Actindx.DepartementID

View 1 Replies View Related

Multi-part Identifier Error

Sep 7, 2007

Hi,

I have the following statement with multi-part identifier error :-

SELECT #t.vno,transact.vdesc,transact.acctno,transact.camt,transact.damt,transact.ccamt,transact.cdamt
into #main
FROM transact,(
SELECT VNO,VTYPE,TDATE,SUM(CAMT) AS SCAMT,SUM(DAMT) AS SDAMT
FROM TRANSACT
WHERE YEAR = 2007 and batchno = 5
GROUP BY VNO,VTYPE,TDATE
having sum(camt) <> sum(damt)
)as #t
WHERE (transact.YEAR = 2007)

thanks

View 4 Replies View Related

The Multi-part Identifier Error

May 16, 2008

Hi i am finding difficulty in adding updating the Last transaction Date of Materials Loaded Out.

The Master table has LoadID, LastLoadDate.
Child Table has MaterialID, LoadID, Weight1, Weight1DateTime, Weight2, Weight2DateTime

My Requirement is to update the Master.LastLoadDate field with the Highest date of the materials loaded out on different days.

I wrote the following query and it is getting me

" The multi-part identifier "#tblTemp.Mydate" could not be bound "



update table Tbl_LoadMaster set LastTransDate=(Select MAX(#tblTemp1.Mydate) as MaxDate from (

Select * from(

select Distinct Weight1DateTime as MyDate from Tbl_LoadMaterialDetails where LoadID=1 Union

select Distinct Weight2DateTime as MyDate from Tbl_LoadMaterialDetails where LoadInID=1

) #tblTemp1) #TblTemp2)


Please help me o find a solution for this situation. I am in a real hurry.

Thanks in Advance
Vineesh


View 3 Replies View Related

Error 'multi-part Identifier Could Not Be Bound' In CTE

Mar 24, 2008

I am trying to run a Common Table Expression (CTE) in SQL Server 2005 but I receive the error


'Msg 4104, Level 16, State 1, Line 2

The multi-part identifier "ep.ProjectUID" could not be bound'.

What does this error mean?

My SQL is:




Code Snippet
WITH Tasks (TaskParentUID, TaskUID, ProjectName, TaskName, Level)
AS
(
SELECT et.TaskParentUID, TaskUID, ProjectName, TaskName,
0 AS Level
FROM dbo.MSP_EpmProject as ep
INNER JOIN dbo.MSP_EpmTask as et
ON ep.ProjectUID = et.ProjectUID
WHERE et.TaskParentUID = et.TaskUID
UNION ALL
SELECT et.TaskParentUID, et.TaskUID, ep.ProjectName, et.TaskName,
Level + 1
FROM dbo.MSP_EpmProject as ep
INNER JOIN dbo.MSP_EpmTask as et
ON ep.ProjectUID = et.ProjectUID
INNER JOIN Tasks AS t
ON et.TaskParentUID = t.TaskUID
)
SELECT t.TaskParentUID, t.TaskUID, ProjectName, t.TaskName, Level
FROM Tasks as t
INNER JOIN dbo.MSP_EpmTask as et
ON Tasks.TaskParentUID = et.TaskParentUID
WHERE Level = 0




The TaskParentUID has data-type of UniqueIdentifier and it's child is TaskUID which is also a UniqueIdentifier type. My goal of this CTE is to list all child TaskUIDs for each TaskParentUID in a recursive fashion.

View 7 Replies View Related

Error Message(the Multi-part Identifier)

Mar 15, 2008

this error messages appear when i execute this trigger
please help me
i make my graduation project


CREATE TRIGGER Insert_Contribution
ON Contributions
AFTER INSERT
AS
BEGIN
declare @error1 int,@error2 inT
BEGIN TRANSACTION
if(select Cash_OR_Account from Services,Contributions
where Services.S_ID=Inserted.S_ID)='A'
BEGIN
UPDATE Regular_Customers
SET Balance=Balance-inserted.amount
WHERE Services.Account_NO=Regular_Customers.Account_NO
AND Services.S_ID=Inserted.S_ID
SET @error1=@@ERROR
END
UPDATE Regular_Customers
SET Balance=Balance+inserted.amount
WHERE inserted.Account_NO=Regular_Customers.Account_NO
SET @error2=@@ERROR
IF @error1=0 AND @error2=0
BEGIN
COMMIT TRANSACTION
PRINT'Transaction Completed successfully'
END
ELSE
ROLLBACK TRANSACTION


SET NOCOUNT ON;
-- Insert statements for trigger here
END
GO
message
Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 13
The multi-part identifier "Inserted.S_ID" could not be bound.
Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 16
The multi-part identifier "Services.Account_NO" could not be bound.
Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 16
The multi-part identifier "Services.S_ID" could not be bound.
Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 16
The multi-part identifier "Inserted.S_ID" could not be bound.

View 2 Replies View Related

Multi-part Identifier Could Not Be Bound Error In 2005

Mar 11, 2008

Hi,We moved our stored procedure from sql 2000 to sql 2005 and we're getting few weird errors:Msg 4104. multi-part identifier /table.column/ could not be bound.Do we have to change anything in the stored procedure in order to make it work for sql 2005? Errors point to lines 25 and 68:25: IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts_Table]') AND type in (N'U'))68: ELSEBelow is the code. Thanks in advance.set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[sp_refresh_GC_Contacts]ASDECLARE@dropSQL varchar(2000)BEGINSET NOCOUNT ON;--SET IDENTITY_INSERT GC_Contacts_Table ON-- drop the fulltext indexIF EXISTS (SELECT * FROM sys.indexes WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts]') AND name = N'pk_gc_contacts')DROP FULLTEXT INDEX ON [dbo].[GC_Contacts] -- drop the unique indexIF EXISTS (SELECT * FROM sys.indexes WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts]') AND name = N'pk_gc_contacts')DROP INDEX [pk_gc_contacts] ON [dbo].[GC_Contacts] WITH ( ONLINE = OFF )-- If table exists truncate itIF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts_Table]') AND type in (N'U'))BEGIN TRUNCATE TABLE [dbo].[GC_Contacts_Table]INSERT INTO [dbo].[GC_Contacts_Table] --insert sql next lineSELECT Title, FirstName AS First_Name, MiddleName AS Middle_Name, LastName AS Last_Name,Suffix, Company, JobTitle AS Job_Title, Email, PrimaryPhoneNumber AS Primary_Phone_Number, PrimaryAddress1 AS Primary_Address_1, PrimaryAddress2 AS Primary_Address_2, PrimaryAddress3 AS Primary_Address_3, PrimaryCity AS Primary_City, PrimaryState AS Primary_State,PrimaryZip AS Primary_Zip, PrimaryCountry AS CPrimary_ountry, Notes, Alias, FullName AS Full_Name,dbo.Addresses.Type AS AddressType, dbo.Addresses.Address1 AS Address1,dbo.Addresses.Address2 AS Address2,dbo.Addresses.Address3 AS Address3, dbo.Addresses.City AS City, dbo.Addresses.State AS State,dbo.Addresses.Zip as Zipcode, dbo.Addresses.Country AS Country, dbo.Addresses.PhoneNumber AS PhoneNumber,dbo.Addresses.FaxNumber AS FaxNumber, SubAward_Only = CASE SubAwardOnlyWHEN 0 THEN 'No'WHEN 1 THEN 'Yes'END,dbo.ContactsSTUDF.*-- IDENTITY(int, 1,1) AS GC_Contact_ID-- INTO dbo.GC_Contacts_TableFROM dbo.Contacts LEFT OUTER JOIN dbo.ContactAddresses ON dboContacts.ID = dboContactAddresses.ContactIDLEFT OUTER JOIN dbo.Addresses ON dbo.Addresses.ID = dboContactAddresses.AddressIDLEFT OUTER JOIN dbo.ContactsSTUDF ON dbo.Contacts.ID = dbo.ContactsSTUDF.EntityIDENDELSE BEGIN-- create the table from the querySELECT Title, FirstName AS First_Name, MiddleName AS Middle_Name, LastName AS Last_Name, Suffix, Company,JobTitle AS Job_Title, Email, PrimaryPhoneNumber AS Primary_Phone_Number, PrimaryAddress1 AS Primary_Address_1, PrimaryAddress2 AS Primary_Address_2, PrimaryAddress3 AS Primary_Address_3, PrimaryCity AS Primary_City, PrimaryState AS Primary_State, PrimaryZip AS Primary_Zip, PrimaryCountry AS CPrimary_ountry, Notes, Alias, FullName AS Full_Name,dbo.Addresses.Type AS AddressType, dbo.Addresses.Address2 AS Address2,dbo.Addresses.Address3 AS Address3, dbo.Addresses.City AS City, dbo.Addresses.State AS State,dbo.Addresses.Zip as Zipcode, dbo.Addresses.Country AS Country, dbo.Addresses.PhoneNumber AS PhoneNumber,dbo.Addresses.FaxNumber AS FaxNumber, SubAward_Only = CASE SubAwardOnlyWHEN 0 THEN 'No'WHEN 1 THEN 'Yes'END,dbo.ContactsSTUDF.*,IDENTITY(int, 1,1) AS GC_Contact_IDINTO dbo.GC_Contacts_TableFROM dbo.Contacts LEFT OUTER JOIN dbo.ContactAddresses ON dboContacts.ID = dboContactAddresses.ContactIDLEFT OUTER JOIN dbo.Addresses ON dbo.Addresses.ID = dboContactAddresses.AddressIDLEFT OUTER JOIN dbo.ContactsSTUDF ON dbo.Contacts.ID = dbo.ContactsSTUDF.EntityIDEND SET IDENTITY_INSERT GC_Contacts_table OFFSET ARITHABORT ONSET CONCAT_NULL_YIELDS_NULL ONSET QUOTED_IDENTIFIER ONSET ANSI_NULLS ONSET ANSI_PADDING ONSET ANSI_WARNINGS ONSET NUMERIC_ROUNDABORT OFF/****** Object: Index [pk_gc_contacts] Script Date: 10/11/2007 15:34:28 ******/CREATE UNIQUE CLUSTERED INDEX [pk_gc_contacts] ON [dbo].[GC_Contacts] ([GC_contact_id] ASC)WITH (SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF) ON [PRIMARY]-- add the fulltext indexCREATE FULLTEXT INDEX ON GC_Contacts([Title],[First_Name],[Middle_Name],[Last_Name],[Suffix],[Company],[Job_Title],[Email],[Primary_Phone_Number],[Primary_Address_1],[Primary_Address_2],[Primary_Address_3],[Primary_City],[Primary_State],[CPrimary_ountry],[Notes],[Alias],[Full_Name],[AddressType],[Address1],[Address2],[Address3],[City],[State],[Country],[PhoneNumber],[FaxNumber],[SubAward_Only])KEY INDEX pk_gc_contacts ON GCInquiryCatalogWITH CHANGE_TRACKING AUTOEND

View 3 Replies View Related

Left Outer Join / Multi-part Identifier Error

Jul 22, 2014

I'm writing a query where I have multiple left-outer joins but I keep getting multi-part identifier error. See the query below?

SELECT gl.seg5 Natural
,gl.seg2 Office
,gl.seg3 Dept
,gl.seg4 Team
,gl.seg6 Sub
,gl.seg7 Tkpr
,gl.seg1 Comp
,'CHK' Source

[Code] ....

Errors

Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.baid" could not be bound.
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.cknum" could not be bound.
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.ckline" could not be bound.

View 5 Replies View Related

Error: The Multi-part Identifier Alias.field Could Not Be Bound

Jan 17, 2007

Im trying to execute following update SQL:



UPDATE Property SET ImageList = U.ImageList

FROM Property M

INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID AND M.FeedID
= U.FeedID

WHERE M.FeedID = ?



But following error:



[Execute SQL Task] Error: Executing the query " UPDATE Property SET
ImageList = U.ImageList FROM Property
M INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID
AND M.FeedID = U.FeedID WHERE M.FeedID = ?" failed with
the following error: "The multi-part identifier "M.FeedID" could
not be bound.". Possible failure reasons: Problems with the query,
"ResultSet" property not set correctly, parameters not set correctly,
or connection not established correctly.



ByPassPrepare is set to TRUE and ParameterName = 0 to variable User::Feed_ID





HOWEVER - following query executes fine:

UPDATE Property SET

ImageList = U.ImageList

FROM Property M

INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID AND M.FeedID
= U.FeedID

WHERE M.FeedID = 11



Beats me - any help with explaining this to me
please?

View 7 Replies View Related

Error While Using OUTPUT Clause - The Multi-part Identifier Could Not Be Bound

Jun 2, 2006

I was trying to copy child records of one parent record into another, and wanted to report back new child record id and corresponding child record id that was used to create it. I ran into run-time error with OUTPUT clause. Following is a script that will duplicate the situation I ran into:
 
CREATE TABLE Parent(
      ParentID INT NOT NULL IDENTITY(1,1) PRIMARY KEY,
      ParentName VARCHAR(50) NOT NULL)
GO
 
CREATE TABLE Child(
      ChildID INT NOT NULL IDENTITY(1,1) PRIMARY KEY,
      ParentID INT NOT NULL REFERENCES Parent(ParentID),
      ChildName VARCHAR(50) NOT NULL)
GO
 
INSERT INTO Parent(ParentName) VALUES('Parent 1')
INSERT INTO Parent(ParentName) VALUES('Parent 2')
GO
 
INSERT INTO Child(ParentID, ChildName) VALUES(1, 'Child 1')
INSERT INTO Child(ParentID, ChildName) VALUES(1, 'Child 2')
GO
 
At this stage, there Child table looks like:
 




ChildID

ParentID

ChildName


1

1

Child 1


2

1

Child 2
 
What I want to do is copy Parent 1€™s children to Parent 2, and report back which source ChildID that was used to create the new child records. So I wrote the query:
 
DECLARE @LinkTable TABLE (FromChildID INT, ToChildID INT)
 
INSERT INTO Child(ParentID, ChildName)
OUTPUT c.ChildID, inserted.ChildID INTO @LinkTable
      SELECT 2, c.ChildName
      FROM Child c
      WHERE c.ParentID = 1
 
SELECT * FROM @LinkTable
 
In the end I was expecting Child table to look like:
 




ChildID

ParentID

ChildName


1

1

Child 1


2

1

Child 2


3

2

Child 1


4

2

Child 2
 
and OUTPUT clause to return me:
 




FromChildID

ToChildID

 


1

3

Child record with ID 3 was created using ID of 1.


2

4

Child record with ID 4 was created using ID of 2.
 
 
But infact I€™m getting following error:
 
Msg 4104, Level 16, State 1, Line 9
The multi-part identifier "c.ChildID" could not be bound.
 
Any ideas on how to fix the OUTPUT clause in the query to return me the expected output?
 
Thanks
Yogesh

View 7 Replies View Related

Error: Msg 102, Level 15, State 1, Line 1

Aug 2, 2007

Hi,

I have built a stored procedure and the code is like below:





Code Snippet

DECLARE @Table_Name VARCHAR(100)
DECLARE @Table_Desc SQL_VARIANT
DECLARE @Query VARCHAR(8000)

USE HRD

SELECT @Table_Name = 'Employee'

SELECT @Query = 'IF EXISTS (SELECT * FROM sys.triggers WHERE object_id = OBJECT_ID(N''[dbo].[DEL_' + UPPER(@Table_Name) + ']''))
DROP TRIGGER [dbo].[DEL_' + UPPER(@Table_Name) + ']'
EXEC(@Query)

SELECT @Table_Desc = (SELECT a.value
FROM
sys.extended_properties a, sys.tables b
WHERE a.major_id = b.object_id
AND a.minor_id = 0
AND a.name = 'MS_DESCRIPTION'
AND b.name = @Table_Name)

SELECT @Query = '''CREATE TRIGGER [DEL_' + UPPER(@Table_Name) + '] ON dbo.' + @Table_Name + '
FOR DELETE
AS

DECLARE @Old_Value VARCHAR(8000)
DECLARE @New_Value VARCHAR(8000)
DECLARE @P_Key VARCHAR(8000)
DECLARE @P_Key_Value VARCHAR(8000)
DECLARE @P_Key_Insert VARCHAR(8000)
DECLARE @Comment VARCHAR(8000)

SELECT @P_Key_Insert = ''''''''

EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_PrimKey]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_PrimKey]'''')

SELECT K.COLUMN_NAME INTO Temp_PrimKey
FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS T
INNER JOIN INFORMATION_SCHEMA.KEY_COLUMN_USAGE K
ON T.CONSTRAINT_NAME = K.CONSTRAINT_NAME
WHERE
T.CONSTRAINT_TYPE = ''''PRIMARY KEY'''' AND T.TABLE_NAME = ''''' + @Table_Name + '''''

EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Value]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Value]'''')

EXEC(''''CREATE TABLE [dbo].[Temp_Value](
[PValue] [VARCHAR](max) NOT NULL
) ON [PRIMARY]'''')

EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Deleted]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Deleted]'''')

SELECT * INTO Temp_Deleted FROM deleted

DECLARE Curs_PrimKey CURSOR FOR
SELECT * FROM Temp_PrimKey

OPEN Curs_PrimKey
FETCH NEXT FROM Curs_PrimKey INTO @P_Key
WHILE @@FETCH_STATUS = 0
BEGIN
EXEC(''''INSERT INTO Temp_Value SELECT ''''+ @P_Key + '''' FROM Temp_Deleted'''')
SELECT @P_Key_Value = (SELECT PValue FROM Temp_Value)
EXEC(''''DELETE FROM Temp_Value'''')
SELECT @P_Key_Insert = @P_Key_Insert + @P_Key + '''' = '''' + @P_Key_Value + '''', ''''
FETCH NEXT FROM Curs_PrimKey INTO @P_Key
END
CLOSE Curs_PrimKey
DEALLOCATE Curs_PrimKey

EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Deleted]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Deleted]'''')

EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Value]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Value]'''')

SELECT @P_Key_Insert = LEFT(@P_Key_Insert, LEN(@P_Key_Insert)-2)
SELECT @Comment = ''''' + CAST(@Table_Desc AS VARCHAR) + ' deleted, '''' + @P_Key_Insert

INSERT INTO TLOG(Log_Date, Log_Reference, Log_Comment)
VALUES (GETDATE(), @P_Key_Insert, @Comment)
'''
--PRINT @Query
EXEC(@Query)
Problem is when I run it gives error:

Msg 102, Level 15, State 1, Line 1Incorrect syntax near 'CREATE TRIGGER [DEL_EMPLOYEE] ON dbo.Employee FOR DELETEAS DECLARE @Old_Value VARCHAR(8000)DECLARE @New_Value VARCHA'.

If I print the @Query and run it in a query analyzer using the statement EXEC it worked. It's giving me headache, this supposed to be a simple exec statement. Please advise. Thanks.

View 2 Replies View Related

CLR TVF Error: Msg 6260, Level 16, State 1, Line 1

Aug 7, 2007

Dear All, I always got this error in CLR TVF:

Msg 6260, Level 16, State 1, Line 1
An error occurred while getting new row from user defined Table Valued Function :
System.InvalidOperationException: Invalid attempt to FieldCount when reader is closed.
System.InvalidOperationException:
at System.Data.SqlClient.SqlDataReaderSmi.get_FieldCount()
at System.Data.Common.DbEnumerator.BuildSchemaInfo()
at System.Data.Common.DbEnumerator.MoveNext()

Here is my code:

using System;
using System.Data;
using System.Data.Common;
using System.Data.SqlTypes;
using System.Data.SqlClient;
using Microsoft.SqlServer.Server;
using System.Collections;

public static class UserDefinedFunctions
{
[Microsoft.SqlServer.Server.SqlFunction(FillRowMethodName = "rowfiller",DataAccess=DataAccessKind.Read,TableDefinition = "ActID int, ActName nvarchar(50), ActCreatorID int,ActDesp nvarchar(200),ActCreateDate datetime,ActModifyDate datetime, ActStartDate datetime, ActEndDate datetime, Status int, Cost int")]
public static IEnumerable Func_GetSchCatActivityIDTable(int CatActivityID)
{
using (SqlConnection connection = new SqlConnection("context connection=true"))
{
string sqlstring = "select * from Activity where CatActivityID=@CatActivityID;";

connection.Open();
SqlCommand command = new SqlCommand(sqlstring, connection);
command.Parameters.AddWithValue("@CatActivityID", CatActivityID);


return command.ExecuteReader(CommandBehavior.CloseConnection);

}
}
[System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft Performance","CA1811:AvoidUncalledPrivateCode")]
public static void rowfiller(Object obj,
out SqlInt32 ActID,
out SqlString ActName,
out SqlInt32 ActCreatorID,
out SqlString ActDesp,
out SqlDateTime ActCreateDate,
out SqlDateTime ActModifyDate,
out SqlDateTime ActStartDate,
out SqlDateTime ActEndDate,
out SqlInt32 Status,
out SqlInt32 Cost,
)
{

SqlDataRecord row = (SqlDataRecord)obj;
int column = 0;

ActID = (row.IsDBNull(column)) ? SqlInt32.Null : new SqlInt32(row.GetInt32(column)); column++;
ActName = (row.IsDBNull(column)) ? SqlString.Null : new SqlString(row.GetString(column)); column++;
ActCreatorID = (row.IsDBNull(column)) ? SqlInt32.Null : new SqlInt32(row.GetInt32(column)); column++;
ActDesp = (row.IsDBNull(column)) ? SqlString.Null : new SqlString(row.GetString(column)); column++;
ActCreateDate = (row.IsDBNull(column)) ? SqlDateTime.Null : new SqlDateTime(row.GetDateTime(column)); column++;
ActModifyDate = (row.IsDBNull(column)) ? SqlDateTime.Null : new SqlDateTime(row.GetDateTime(column)); column++;
ActStartDate = (row.IsDBNull(column)) ? SqlDateTime.Null : new SqlDateTime(row.GetDateTime(column)); column++;
ActEndDate = (row.IsDBNull(column)) ? SqlDateTime.Null : new SqlDateTime(row.GetDateTime(column)); column++;
Status = (row.IsDBNull(column)) ? SqlInt32.Null : new SqlInt32(row.GetInt32(column)); column++;
Cost = (row.IsDBNull(column)) ? SqlInt32.Null : new SqlInt32(row.GetInt32(column)); column++;
}


};

Can anyone tell me what I am doing wrong? Many thanks

.

View 8 Replies View Related

Database Mirror Error Msg 1447, Level 16, State 21, Line 1

Feb 19, 2007

we config our SAP system to use SQL Server 2005 database mirror. but the mirror server hang by accident, after restart mirror server,the server return to normal,but the mirror can't be resume.

ALTER DATABASE R3P
SET PARTNER resume

the error is:
Msg 1447, Level 16, State 21, Line 1
ALTER DATABASE "R3P" command cannot be executed until both partner server instances are up, running, and connected. Start the partner and reissue the command.

View 2 Replies View Related

Management Studio Disconnects With Error Msg 0, Level 11, State 0, Line 0

Nov 3, 2006

I am trying to run the following:

select * from sysindexes

The operation begins and results are produced but after about 200 results, I get the error - Msg 0, Level 11, State 0, Line 0 - and it disconnects.

This is a DB moved (restored) from SQL 2000 to SQL 2005.

Any ideas would be appreciated. I am the "make do" DBA and not very good at it yet, I am afraid.

Regards,

Mike







View 8 Replies View Related

SQL 2005 - .Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0 - Error Parsing Statements

Nov 2, 2006

Hi,

Does anyone else have this error message pop up in SSMS when you try to parse sql statements:

.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0

A severe error occurred on the current command. The results, if any, should be discarded.

There was a thread back in March 2006 that mentioned this error, but the posted resolution was to install SP1.  I have SP1 installed but I still get the error.

I only receive the error when I'm parsing statements, if I run the statement it's fine.

 

Thanks

Matt

 

View 8 Replies View Related

Multi-part Identifier

Jun 18, 2008

use projectserver2003
selectr.RES_NAME, p.PROJ_NAME, a.TASK_NAME, w.WWORK_START, w.WWORK_FINISH, w.WWORK_VALUE
from MSP_WEB_RESOURCES r,
MSP_WEB_ASSIGNMENTS a,
MSP_WEB_PROJECTS p,
MSP_WEB_WORK w
join MSP_VIEW_PROJ_TASKS_ENT TE on r.WPROJ_ID=TE.WPROJ_ID
join MSP_VIEW_PROJ_RES_ENT RE on r.WPROJ_ID=RE.WPROJ_ID
join MSP_VIEW_PROJ_PROJECTS_ENT PE on r.WPROJ_ID=PE.WPROJ_ID
wherew.WWORK_TYPE = 1 -- actual work
andw.WASSN_ID = a.WASSN_ID
anda.WPROJ_ID = p.WPROJ_ID
anda.WRES_ID = r.WRES_ID


This statement is returning the following errors:

Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "r.WPROJ_ID" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "r.WPROJ_ID" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "r.WPROJ_ID" could not be bound.



I have all tables identified; however unclear as to why it cannot be bound.

Please help.

View 4 Replies View Related

The Multi-part Identifier

Apr 4, 2006

if exists (select 'x' from obj where new_obj.key1 = obj.key1 and new_obj.class = obj.class)
BEGIN
set @temp_old_ref = (select obj.rowid from obj where new_obj.key1 = obj.key1 and new_obj.class = obj.class)
SET IDENTITY_INSERT new_obj ON
insert into new_obj(rid, key1, class, is_searchable, is_deleted, is_loaded, old_rid, old_ref) select rid, key1, class, is_searchable, is_deleted, is_loaded, old_rid, @temp_old_reffrom new_obj
delete from new_obj where old_ref != @temp_old_ref
END


while running it i m getting this error

Msg 4104, Level 16, State 1, Procedure mergeChanges, Line 35
The multi-part identifier "new_obj.key1" could not be bound.
Msg 4104, Level 16, State 1, Procedure mergeChanges, Line 35
The multi-part identifier "new_obj.class" could not be bound.
Msg 4104, Level 16, State 1, Procedure mergeChanges, Line 37
The multi-part identifier "new_obj.key1" could not be bound.
Msg 4104, Level 16, State 1, Procedure mergeChanges, Line 37
The multi-part identifier "new_obj.class" could not be bound.


any thoughts

View 2 Replies View Related

Multi Part Identifier

Nov 7, 2007

Can anyone explain why i get the folling error.


Msg 4104, Level 16, State 1, Procedure rpt_getChildren, Line 33

The multi-part identifier "c.childID" could not be bound.

Msg 4104, Level 16, State 1, Procedure rpt_getChildren, Line 33

The multi-part identifier "c.siteID" could not be bound.

Msg 4104, Level 16, State 1, Procedure rpt_getChildren, Line 33

The multi-part identifier "c.siteID" could not be bound.

Msg 1011, Level 16, State 1, Procedure rpt_getChildren, Line 33

The correlation name 'sg' is specified multiple times in a FROM clause.


create procedure rpt_getChildren

@cmb1 as varchar(100)

AS


BEGIN


set dateformat YMD

set datefirst 7


CREATE TABLE #ChildSessions (

siteid integer null

,childid integer null

,sessionid integer null

,sun integer default 0

,mon integer default 0

,tue integer default 0

,wed integer default 0

,thr integer default 0

,fri integer default 0

,sat integer default 0)


declare @firstofweek as datetime

declare @lastofweek as datetime


select @firstofweek=cast(floor(cast(dateadd(day,(-1*datepart(dw,getdate())+1),getdate()) as float)) as datetime)

select @lastofweek=dateadd(minute,-1,dateadd(day,7,@firstofweek))

declare @myday integer


set @myday=0

while @myday<7


BEGIN


INSERT INTO #ChildSessions


SELECT


c.siteid

,c.childid

,sg.sessionid



,case @myday WHEN 1 THEN 1 ELSE 0 end

,case @myday WHEN 2 THEN 1 ELSE 0 end

,case @myday WHEN 3 THEN 1 ELSE 0 end

,case @myday WHEN 4 THEN 1 ELSE 0 end

,case @myday WHEN 5 THEN 1 ELSE 0 end

,case @myday WHEN 6 THEN 1 ELSE 0 end

,case @myday WHEN 7 THEN 1 ELSE 0 end


FROM




Child c


,sessionAttendance sa

,session s

,sessiongroup sg

INNER JOIN


SessionAttendance sa

ON c.childID = sa.childID

INNER JOIN


Session s

ON c.siteID = s.siteID

INNER JOIN


Site

ON c.siteID = s.siteID


INNER JOIN

SessionGroup sg

ON c.siteID = sg.siteID


WHERE


c.childID = sa.childid



AND c.siteid = sa.siteid

AND c.active = 1

AND c.potential = 0

AND s.identityid = sa.identityid

AND s.siteid = sa.siteid

AND sg.sessionid = s.sessionID

AND sg.siteid = s.siteid

--AND site.sitename = @cmb1

AND s.dayofweek = @myday

AND @firstofweek <= sa.dateTo

AND @lastofweek >= sa.dateFrom

SET @myday=@myday+1

END


SELECT



c.forename,

c.surname,

sg.sessionname,

--sitename,

CASE (sum(sun)) WHEN 0 THEN ' ' ELSE 'X' END as sun,

CASE (sum(mon)) WHEN 0 THEN ' ' ELSE 'X' END as mon,

CASE (sum(tue)) WHEN 0 THEN ' ' ELSE 'X' END as tue,

CASE (sum(wed)) WHEN 0 THEN ' ' ELSE 'X' END as wed,

CASE (sum(thr)) WHEN 0 THEN ' ' ELSE 'X' END as thr,

CASE (sum(fri)) WHEN 0 THEN ' ' ELSE 'X' END as fri,

CASE (sum(sat)) WHEN 0 THEN ' ' ELSE 'X' END as sat,



case when datepart(day,c.dob)<=datepart(day,getdate())

then cast((datediff(month,c.dob,getdate())/12) as varchar(3)) + ' Yr '

+ cast((datediff(month,c.dob,getdate())% 12) as varchar(2)) + ' Mnth'

when datepart(day,c.dob)>datepart(day,getdate())

then cast(((datediff(month,c.dob,getdate())-1)/12) as varchar(3)) + ' Yr '

+ cast(((datediff(month,c.dob,getdate())-1)% 12) as varchar(2)) + ' Mnth' end as Child_Age


FROM child c,sessiongroup sg, site, #childsessions cs


WHERE c.childid=cs.childid



AND c.siteid=cs.siteid

AND sg.sessionid=cs.sessionid

AND sg.siteid=cs.siteid

--AND s.sitename = @cmb1


GROUP BY c.forename,c.surname,sg.sessionname,c.dob,c.childid

ORDER BY sg.sessionname,c.forename,c.surname

DROP TABLE #ChildSessions

END

GO












View 5 Replies View Related

ISQL: Msg 170, Level 15, State 1, Line 1 Line 1: Incorrect Syntax Near ' '

Nov 8, 2006

G'day everyoneThat's a space between the ticks.It's all part of a longer script but seeing as the failure occurs online 1if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[config]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[config]GOThat's three lines only. Does it matter that they're in Unicode?Any ideas?Kind regards,Bruce M. AxtensSoftware EngineerStrapper Technologies

View 3 Replies View Related

The Multi-part Identifier ....... Could Not Be Bound.

May 29, 2008

I am trying to execute a query in SQL SERVER 2005 for calculating days difference for each. I created a function because there are a lot of calculations. In SPeriods table I have 4 fields that I want to pass as parameters in the table-value function TFC_date_diff, but I receive the error "The multi-part identifier "CC.start_period_no" could not be bound.
Is there a solution for this ?
SELECT     CC.start_period_no, CC.end_period_no, CC.start_year, CC.end_year, TFC_date_diff.dates_differnceFROM         dbo.[SPeriods] AS CC CROSS JOIN                      dbo.TFC_date_diff(CC.start_period_no, CC.end_period_no, CC.start_year, CC.end_year) AS TFC_date_diff_1
Thanks a lot in advance!

View 2 Replies View Related

Multi-Part Identifier Not Found

Mar 5, 2008

I have the following code and I am getting the error Multi-Part identifier not found.
I know its a problem with the code highlighted in green. Can anyone help?


Select
a.Code 'Product Code',
a.Description 'Product Description',
PackSize,
NetWeight,
GrossWeight,
CubicVolume,
SupplierOwnCode,
a.SupplierCode,
b.[Name] 'Supplier Name',
e.Description 'Product Type Description',
LeadTime,
os.description,
sum(pl.QuantityOrder) 'Order With Supplier',
0 'On Order By Customer',
sum(pl.QuantityOrder) - 0 'Total On Order'
from Product a
inner join Supplier b on a.SupplierCode = b.code
inner join ProductType e on a.TypeID = e.ID
inner join PurchaseOrderLines pl on po.code = pl.PurchaseOrderCode
LEFT join PurchaseOrders po on a.code = pl.productcode
LEFT join orderstatus os on po.orderstatus = os.id
AND os.id = 2
where a.code = @ProductCode
group by
a.Code , a.Description , PackSize, NetWeight, GrossWeight,
CubicVolume, SupplierOwnCode, a.SupplierCode, b.[Name],
e.Description , LeadTime, os.description

Cheers

View 5 Replies View Related

The Multi-part Identifier Could Not Be Bound.

May 27, 2008

Hi All ,
i am getting this multi-part identifier not found error
followingis my stored procedure




ALTER PROCEDURE [dbo].[Ab_LP]

@gyr char(4),

-- 'A', --'S', only submitted will be returned;

--A=All, or any other letter other than 'S', all will b returned;

@ExONo char(1)='A'

AS

DECLARE @sql VARCHAR(1500)


SET @sql = 'SELECT LTRIM(RTRIM(t1.Last_Name))+'',''+LTRIM(RTRIM(t1.First_Name)) as Name,t2.emaddr as Email,t3.* FROM namesTable as t2,PersonalTable as t1'


IF (@ExONo='S')

SET @sql = LTRIM(RTRIM(@sql)) + ',LePAb AS t3 WHERE t3.emaddr = t2.emaddr AND t2.code = ''ABC'' AND t1.Emplid=t2.Emplid '

ELSE

SET @sql = LTRIM(RTRIM(@sql)) + ' LEFT JOIN LePAb AS t3 ON

t3.emaddr=t2.emaddr WHERE t2.code = ''ABC'' AND t1.Emplid=t2.Emplid '

IF (@gyr <> 0)

SET @sql = LTRIM(RTRIM(@sql)) + ' AND t2.gyr='+@gyr

ELSE

SET @sql = LTRIM(RTRIM(@sql)) + ' AND t1.Code = ''ABC'' '



SET @sql = LTRIM(RTRIM(@sql)) + ' ORDER BY Name'

print @sql

EXEC (@sql)

I am geting an error as

The multi-part identifier "t2.emaddr" could not be bound.
i have tried all the possible tricks but in vain.
plz help..
thanks in advance

View 5 Replies View Related

The Multi-part Identifier Could Not Be Bound.

Sep 10, 2006

hi,

i don't know what the prob with my code:

create table #tmpAllocation (

[ResourceID] int,

[Resource] varchar(50),

[WorkTeamID] int,

[WorkTeam] varchar(100),

[LineModuleId] int,

[AccountId] varchar(100),

[VpIdentifier] int,

[DivisionId] varchar(100),

[GroupId] int,

[Account/Version] varchar(100),

[version_id] int,

[1] numeric(9,5),[2] numeric(9,5),[3] numeric(9,5),[4] numeric(9,5),[5] numeric(9,5), numeric(9,5),[7] numeric(9,5), numeric(9,5),[9] numeric(9,5),

[10] numeric(9,5),[11] numeric(9,5),[12] numeric(9,5),[13] numeric(9,5),[14] numeric(9,5),[15] numeric(9,5),[16] numeric(9,5),[17] numeric(9,5),[18] numeric(9,5),

[19] numeric(9,5),[20] numeric(9,5),[21] numeric(9,5),[22] numeric(9,5),[23] numeric(9,5),[24] numeric(9,5),[25] numeric(9,5),[26] numeric(9,5),[27] numeric(9,5),

[28] numeric(9,5),[29] numeric(9,5),[30] numeric(9,5),[31] numeric(9,5),[32] numeric(9,5),[33] numeric(9,5),[34] numeric(9,5),[35] numeric(9,5),[36] numeric(9,5),

[37] numeric(9,5),[38] numeric(9,5),[39] numeric(9,5),[40] numeric(9,5),[41] numeric(9,5),[42] numeric(9,5),[43] numeric(9,5),[44] numeric(9,5),[45] numeric(9,5),

[46] numeric(9,5),[47] numeric(9,5),[48] numeric(9,5),[49] numeric(9,5),[50] numeric(9,5),[51] numeric(9,5),[52] numeric(9,5),[53] numeric(9,5))

insert into #tmpAllocation

select msp_resources.emp_code as [ResourceID],

msp_resources.res_name as [Resource],

WorkTeam.workteam_id as [WorkTeamID],

acc.account_name + ' / ' + WorkTeam.workteam_name as [WorkTeam],

line_module.line_module_id as [LineModuleId],

acc.account_id as [AccountId],

vp.vp_identifier as [VpIdentifier],

division.division_id as [DivisionId],

division.group_id as [GroupId],

Account.account_name + ' / ' + Version.version_name as [Account/Version],

Version.version_id as [version_id],

Version_Resources_Allocation.pct_allocation [pct_allocation]

from WorkTeam, Version_Resources_Allocation

pivot (sum(pct_allocation )

for Version_Resources_Allocation.week IN ([1],[2],[3],[4],[5],,[7],,[9],[10],[11],[12],[13],[14],[15],[16],[17],[18],[19],[20],[21],[22],[23],[24],[25],[26],[27],[28],[29],[30],[31],[32],[33],[34],[35],[36],[37],[38],[39],[40],[41],[42],[43],[44],[45],[46],[47],[48],[49],[50],[51],[52], [53])) as pvt

inner join Version_Resources_Allocation on WorkTeam.workteam_id = Version_Resources_Allocation.workteam_id

inner join WorkTeam_Resources_Assignments on WorkTeam_Resources_Assignments.resource_id = Version_Resources_Allocation.resource_id

and WorkTeam_Resources_Assignments.workteam_id = Version_Resources_Allocation.workteam_id

inner join calendar on calendar.year = WorkTeam_Resources_Assignments.year

and calendar.month = WorkTeam_Resources_Assignments.month

and calendar.year = Version_Resources_Allocation.year

and calendar.week = Version_Resources_Allocation.week

inner join Version on Version.version_id = Version_Resources_Allocation.version_id

inner join Account on Account.account_id = Version.account_id

--hierarchy joins

inner join line_module on line_module.line_module_id = WorkTeam.line_module_id

inner join Account as acc on acc.account_id = line_module.account_id

inner join vp on vp.vp_identifier = acc.vp_identifier

inner join division on division.division_id = vp.division_id

--Resources joins

inner join msp_resources on msp_resources.emp_code = Version_Resources_Allocation.resource_id

where Version_Resources_Allocation.resource_id in (select top 100 percent emp_code from #staffEmployees where id between ((@quota * (@pageIndex - 1) + 1)) and (@quota * @pageIndex) order by res_name)

and

(

(Version_Resources_Allocation.year = @startYear and Version_Resources_Allocation.week >= @startWeek and Version_Resources_Allocation.week <= (case when @startYear = @endYear then @endWeek else @maxWeeksInFirstYear end))

or

(Version_Resources_Allocation.year = @endYear and Version_Resources_Allocation.week <= @endWeek and Version_Resources_Allocation.week >= (case when @startYear = @endYear then @startWeek else 1 end))

)

and

(

pct_availability!=0 or (pct_availability is null and staffing_pct_availability!=0)

)

and

(

(WorkTeam_Resources_Assignments.year = @startYear and WorkTeam_Resources_Assignments.month >= @startMonth and WorkTeam_Resources_Assignments.month <=

case when @startYear = @endYear then @endMonth else 12 end

)

or

(WorkTeam_Resources_Assignments.year = @endYear and WorkTeam_Resources_Assignments.month <= @endMonth and WorkTeam_Resources_Assignments.month >=

case when @startYear = @endYear then @startMonth else 1 end

)

)

--and pct_allocation is not null

group by msp_resources.emp_code,

msp_resources.res_name,

WorkTeam.workteam_id,

WorkTeam.workteam_name,

line_module.line_module_id,

acc.account_id,

acc.account_name,

vp.vp_identifier,

division.division_id,

division.group_id,

Account.account_name + ' / ' + Version.version_name,

acc.account_name+ ' / ' + WorkTeam.workteam_name,

Version.version_id

I get:



The multi-part identifier "WorkTeam.workteam_id" could not be bound.

The multi-part identifier "WorkTeam.line_module_id" could not be bound.



Why?





Thanks,

Omri

View 4 Replies View Related

The Multi-part Identifier (Column Name) Could Not Be Bound

Jan 19, 2013

Which the column name is the c.Documenttype

here is my T-sql code..

SELECT [Hourly]
,count(case when C.Documenttype=1 THEN '1' END) as EDI
,count(case when C.Documenttype=2 THEN '2' END) as SI
,count(case when C.Documenttype=1 THEN '1' END) + count(case when C.Documenttype=2 THEN '2' END) as GrandTotal

[Code] ....

View 2 Replies View Related

The Multi-part Identifier T2.customerid Could Not Be Bound.

Feb 15, 2008

I try to automate ans insert (that ok) and update jobs

but these part is not working I got the following error

The multi-part identifier "t2.customerid" could not be bound.

any idea'll be welcomed I'm not so good in programming and sql

update [ADOS].[dbo].[Customers]
set t2.companyname = t1.companyname
where t2.customerid = (SELECT t1.companyname
FROM [Northwind].[dbo].[Customers] T1 inner join [ADOS].[dbo].[Customers] T2 on (t1.customerid = t2.customerid and t1.companyname <>t2.companyname))

View 13 Replies View Related

Temporary Table And Multi-part Identifier

Mar 27, 2006

Hi,

I want to join a temporary table with a table in my stored procedure :

CREATE PROCEDURE sp_DeltaabgleichDarlehen
AS
BEGIN

SELECT Grundeinstellungen.Dat_Initialisierung, Grundeinstellungen.Dat_Jahresbeginn
INTO #temp_IniDatum
FROM Grundeinstellungen

INSERT INTO DeltaDarlStammdaten (Datum, Vertragsnummer)
SELECT ImpDarlStammdaten.Datum, ImpDarlStammdaten.Vertragsnummer
FROM ImpDarlStammdaten
WHERE ImpDarlStammdaten.Datum=#temp_IniDatum.Dat_Jahresbeginn

END
    

i get the error :

The multi-part identifier "#temp_IniDatum.Dat_Jahresbeginn" could not be boundfor example

What is the problem? and how can i solve this?

thank you

Jupp

View 4 Replies View Related

The Multi-part Identifier P.stock_price Could Not Be Bound

Oct 16, 2007



Hello,
I am running
Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
Apr 14 2006 01:12:25
Copyright (
c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.1 (Build 260
0: Service Pack 2)
on Windows.
using jdbc
<driver name="com.microsoft.sqlserver.jdbc.SQLServerDriver" tag="sqlserver"
url="jdbcqlserver://[host]:[port];DatabaseName=[dbname];user=[user];password=[password]">
<jar subdir="sqlserver" name="sqljdbc.jar" />
</driver>

I print out the following info to make sure I get the right driver:
'JDBC driver details' , ' driver class name=com.microsoft.sqlserver.jdbc.SQLServerDriver
driver majorVersion=1
driver minorVersion=1
driver a genuine JDBC CompliantTM driver=true'

I execute the following query
SELECT p.cust_id,
p.stock_units FROM dbo.customer_portfolio p
WHERE p.stock_price = ?

and get this message:
com.microsoft.sqlserver.jdbc.SQLServerException: The multi-part identifier "p.stock_price" could not be bound. stack trace: [com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
com.microsoft.sqlserver.jdbc.SQLServerParameterMetaData.<init>(Unknown Source)
com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.getParameterMetaData(Unknown Source)

If I change it to:

SELECT cust_id,
stock_units FROM dbo.customer_portfolio
WHERE stock_price = ?

i.e. do not use correlation names, it executes as expected. Is there anything wrong with using correlation names in the query ? or is it a bug ?. Any help will be welcome.

View 3 Replies View Related

The Multi-part Identifier T0.CategoryId Could Not Be Bound.

Dec 3, 2007

HI,

This query gets generated when I try to execute my dlinq query in .net. It throws error


The multi-part identifier "t0.CategoryId" could not be bound.

CategoryId is a primary field in Category table. Although we don't select it in the query, it throws above error.

SELECT [t0].[CategoryName], [t3].[CategoryConditionId], [t3].[ConditionId]

FROM [Category] AS [t0]

CROSS APPLY (

SELECT NULL AS [EMPTY]

) AS [t1]

LEFT OUTER JOIN (

SELECT [t2].[CategoryConditionId], [t2].[ConditionId], [t2].[CategoryId]

FROM [CategoryCondition] AS [t2]

WHERE [t0].[CategoryId] = [t2].[CategoryId]

) AS [t3] ON 1=1

CROSS JOIN [Condition] AS [t4]

WHERE [t3].[ConditionId] = [t4].[ConditionId]


Any help would be appreciated.

View 3 Replies View Related

Help With The Multi-part Identifier Alias.field Could Not Be Bound

Aug 17, 2007

Hi, Im trying to run this query



UPDATE DataModif

SET t.Ind_des = Replace (t.Tit_Des,"'",'"')
FROM Tit_Modificables t

WHERE

t.Ind_num in

(SELECT CAST (t2.Ind_num AS VARCHAR(10))

FROM Tit_Modificables t2

WHERE t2.Emp_id ='1100004' AND t2.Ejercicio_fiscal = 2003 AND t2.Nom_tabla = CAST (10 AS NUMERIC))



but ir sends this message error

The multi-part identifier "t.Ind_num" could not be bound.


I don't know if there is a problem because I'm using an Update.. FROM

Any help?

View 6 Replies View Related

The Multi-part Identifier Alias.field Could Not Be Bound???

Apr 28, 2006

Hi,

When I try execute one query in SQL 2k5, with alias in order by clausule, I retrieve the follow message:

Server: Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "alias.fields" could not be bound.

Where alias is a any alias and, fields is a field of the table with alias.

Already exists one fix to patch this?

Thanks

View 39 Replies View Related

Multi-part Identifier Alias.fieldname Could Not Be Bound... Help Me!!

Feb 16, 2007

Hello everyone!

I'm having a problem in using MS SQL 2005 as an ODBC in Powerbuilder 10.

My query which seems to work in Powerbuilder 5 does not work in Powerbuilder 10.

When I execute my query, I got this message "multi-part identifier alias.fieldname could not be bound. I don't know what's seems wrong. I even tried putting no alias but still it won't work..

help me please...

select sc.transaction_code,
case when :as_transtype = '' then drh.so_number else case when :as_transtype = 'SI' then drh.si_number else case when :as_transtype = 'DR' then drh.dr_number else :ad_documentnumber end end end document_number,
case when :as_transtype = '' then drh.so_date else case when :as_transtype = 'SI' then drh.si_date else case when :as_transtype = 'DR' then drh.dr_date end end end transaction_date,
pcd.item_number,
pcd.serial_number,
pcd.serv_tag,
pcd.rev_no,
space(10) supplier_name,
c.customer_name,
pcd.pcc_number,
pcd.supplier_refdocno,
pcd.ref_date,
pcd.original_tag,
pcd.item_description
from pcc_detail pcd
inner join pcc_header pch
on pch.pcc_number = pcd.pcc_number
inner join delivery_receipt_header drh
on pch.so_number = drh.so_number
inner join stock_card sc
on sc.so_number = drh.so_number and
sc.item_number = pcd.item_number
inner join customer c
on drh.customer_code = c.customer_code
where sc.transaction_code in ('DR', 'SE') and
sc.transaction_type <> 'RS' and
sc.item_number like case when :as_itemnumber = '' then sc.item_number else '%' + :as_itemnumber + '%' end and
pcd.serv_tag like case when :as_servicetag = '' then pcd.serv_tag else '%' + :as_servicetag + '%' end and
pcd.serial_number like case when :as_serialnumber = '' then pcd.serial_number else '%' + :as_serialnumber + '%' end and
pch.customer_name like case when :as_customer = '' then pch.customer_name else '%' + :as_customer + '%' end and
:as_transtype in ('SO','SI','DR','PC','') and
sc.transaction_code = case when :as_transtype = 'SI' then 'SE' else 'DR' end and
( pch.so_number = case when :ad_documentnumber = 0 then pch.so_number else :ad_documentnumber end or
pch.si_number = case when :ad_documentnumber = 0 then pch.si_number else :ad_documentnumber end or
pch.pcc_number like case when :ad_documentnumber = '' then pch.pcc_number else '%' + :as_documentnumber + '%' end or
pch.dr_number = case when :ad_documentnumber = 0 then pch.dr_number else :ad_documentnumber end
) and
pcd.item_description like case when :as_itemdesc = '' then pcd.item_description else '%' + :as_itemdesc + '%' end



this is my query

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved