SQL Job Execute Access
Nov 22, 2005Hi,
View 4 Replies
ADVERTISEMENT
Cannot Execute Sp/access Sp Properties Using Gui
Sep 5, 2007I am not able to right click to execute a stored procedure or right click to access the stored procedure properties using Management Studio. Any ideas on what is causing this or if it is supposed to be this way?
Any help is much appreciated.
Execute A SSIS Package From Access
May 31, 2007I have some applications in Access and I execute a DTS from there, Can I execute a SSIS package fron access?
Regards
Does My Procedure Execute Right? Access Issue ?
Dec 13, 2007Hi.
I have made a managed stored (external) procedure and a assembly using Sql Server and VS.
Testing this with EXEC dbo.SqlServerProject3 gives not the wanted output, only "Command(s) completed successfully".
When I test the same C# code from an console application (exe) the program is ok.
EXEC master ..xp_cmdshell 'c: empdivConsoleApplication1.exe'
I want to call the procedure from a trigger, but the program that fires the trigger and the exe gives an error message (but works).
Is this some access issue ?
Please help.
Ivar
Execute Access Database As SQL Server Jobs
Nov 21, 2006Hi While we are migrating Access Database to SQL Server, we would like to keep the Access Database running on schedule in steps until we migrate everything in SQL Server. I have created a SQL Server Job under “Operating System Command (CmdExec)� and in command, pointed where the Access Database is located.
I have created this job as an Admin, so admin has full rights. But when I run this job it does not execute Access Database and gives an error. Following (under dotted line) is the error from Event Log.…………………………………………………..Event Type: WarningEvent Source: SQLSERVERAGENTEvent Category: Job Engine Event ID: 208Date: 11/21/2006Time: 9:15:53 AMUser: N/AComputer: SqlServer01Description:SQL Server Scheduled Job 'Test' (0x86BC5A6881DF1E48BF270E6513B2A0DD) - Status: Failed - Invoked on: 2006-11-21 09:15:51 - Message: The job failed. The Job was invoked by User admin. The last step to run was step 1 (test).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.……………………………………………………
I had replaced access database with some exe file then ran the job. Job ran fine. Why SQL Server job is not able to execute Access Database?
Note: SQL Server has Access Database installed.
Please let me know. I know this is not a very common situation but this is also an option available to utilize.
ThanksRashid
DTS Execute SQL Task On Access Linked Table
Mar 11, 2004Can the DTS execute SQL task recognize a table in an Access database that is linked from another Access database?
I'm attempting to use a DTS Execute SQL task connected to Access1.mdb to make a new table in Access1.mdb that is using a Subquery from a linked table in Access2.mdb . (I know it sounds convoluded..) Its giving me an error in my FROM clause as if it can't recognize the linked table from Access2.mdb.
The reason why I'm doing this is that I'm not sure how to run an Access make table query from DTS that will overwrite the existing table in Access. I get an error that the table already exists.
Any Help?
Hiding A SP In Access Under Query, But Retain Execute On SP
Jul 20, 2005Hello,Access XP, SQL Server 2000Is it possible to hide a SP under Queries in Access, yet still be ableto Execute it from Access?We hooked up a custom form to accept the input parameters (MS FeatureRequest!) for the Stored Procedure. We had two problems with MS's'Input Parameter' dialog: 1) We could not customize, 2) We continuallyreceived a message from Access stating, "The stored procedure executedsuccessfully but did not return records" ('SET NOCOUNT ON' gave nojoy).Below is the sample code we are using.TestInsert is the SPtxtName is a text box on the form@name is char(80)Private Sub cmdAdd_Enter()Dim cmd As New ADODB.CommandDim par As ParameterSet cmd.ActiveConnection = CurrentProject.Connectioncmd.CommandText = "TestInsert"cmd.CommandType = adCmdStoredProcSet par = cmd.CreateParameter("@name", adVarChar, _adParamInput, Len(txtName), txtName)cmd.Parameters.Append parcmd.ExecuteSet cmd = NothingEnd SubAny help would be appreciated. We successfully hid our Tables, andallowed access through Views. But we can't seem to find a good workaround here.ThanksJeffJeffrey Waltonnoloader
View 4 Replies View RelatedAccess Denied When Trying To Execute A Ssis Task
Mar 22, 2006Hi,
I sometimes come accross this error when I attempt to execute an isolated task in the control flow. What is funny is that I am still able to debug the package.
It eventually resolves after a while. What could it be?
Thanks
Philippe
TITLE: Microsoft Visual Studio
------------------------------
Access Denied. (Exception from HRESULT: 0x80030005(STG_E_ACCESSDENIED))
------------------------------
BUTTONS:
OK
------------------------------
Execute Access 2003 Macros In SSIS Package
Nov 17, 2006Hi
Does any one know how to execute Macros in SSIS Package.
I have an Access 2003 Macro which has to be executed in a SSIS package...
I need to pass some runtime parameter also .
How to go about it....
Thanks & Regards
Deepu M.I
Execute Package Task Fail With Access Denied
Jul 12, 2007Hi all,
I have an error when a package is trying to execute a SubPackage using the "Execute Package Task". I have this problem for all packages that are running sub packages.
The packages are stored in the DTSPackages folder of the SQL Server installation folder.
The master package is called from an Event Handler on a document library in MOSS 2007.
The account from the Sharepoint Application Pool has Full Control on the DTSPackages folder.
What am I missing ?
Cannot Execute Xp_cmdshell. Access Is Denied While Copying Data Over The Network
Aug 7, 2006Hi,I am having
some trouble copying data over my workgroup network from my Windows
2003 Server Machine (machineA with SQL SERVER 2005) to one of my
network Machine's drive(MachineB).Here is the T-SQL code that I am trying to execute:EXEC xp_cmdshell 'copy D:Datafile.txt \MachineBDocuments'Whenever
I tried to execute the above piece of code, I get the error message
"Access is denied", but if I try to copy the file from the Command
Prompt (cmd.exe) with the copy command, the file copies fine over the
network.I have already searched over the internet and I found
out that loads of people have the same issue, and they were suggested
something like this:"Check in Services and make sure that the MSSQLServer service is run as
a domain user and that domain user has rights to these network
resources."Well
it sounds plausible, but I don't know what are the exact steps to do
this. How do I know which user is running the MSSQL Server service? Are
they referring to the user which I use to connect to my SQL Server
Database engine throuhg the SQL Server Management Studio?Also they are suggesting 'domain user', and as I said before I do not have domain network just regular simple workgroup network.Here
are some details of the user that I use to login. I generally login
into my Windows 2003 Server machine with user called 'User1' and I use
the same 'User1' to connect to SQL Server through the Management Studio
Screen.Should I create a user called 'User1' on my MachineB(Destination Machine)?I would really appreciate, if someone can give me detailed steps explaning how to solve this problem.Thank you very much once again.
SQL 2012 :: Access Rights To Execute Stored Procedure If There Is No DML Involved
Jul 2, 2014I would like to provide the db_datareader and db_executor role to a particular SQL Server Login in a database
But, I would like to avoid any INSERT's, UPDATE's or DELETE's that may happen by calling the stored procedures
I tried assigning the db_denydatawriter role but it doesn't seem to be doing the trick as the INSERT's, UPDATE's and DELETE's were still working
Is there any way to provide the db_datareader and db_executor role but avoid any DML actions.
Cannot Execute Xp_cmdshell. Access Is Denied While Copying Data Over The Network
Aug 7, 2006Hi,
I am having some trouble copying data over my workgroup network from my Windows 2003 Server Machine (machineA with SQL SERVER 2005) to one of my network Machine's drive(MachineB).
Here is the T-SQL code that I am trying to execute:
EXEC xp_cmdshell 'copy D:Datafile.txt \MachineBDocuments'
Whenever I tried to execute the above piece of code, I get the error message "Access is denied", but if I try to copy the file from the Command Prompt (cmd.exe) with the copy command, the file copies fine over the network.
I have already searched over the internet and I found out that loads of people have the same issue, and they were suggested something like this:
"Check in Services and make sure that the MSSQLServer service is run as
a domain user and that domain user has rights to these network
resources."
Well it sounds plausible, but I don't know what are the exact steps to do this. How do I know which user is running the MSSQL Server service? Are they referring to the user which I use to connect to my SQL Server Database engine throuhg the SQL Server Management Studio?
Also they are suggesting 'domain user', and as I said before I do not have domain network just regular simple workgroup network.
Here are some details of the user that I use to login. I generally login into my Windows 2003 Server machine with user called 'User1' and I use the same 'User1' to connect to SQL Server through the Management Studio Screen.
Should I create a user called 'User1' on my MachineB(Destination Machine)?
I would really appreciate, if someone can give me detailed steps explaning how to solve this problem.
Thank you very much once again.
SQL Security :: Give Access To Create Alter And Execute SPs In Server 2008R2
May 12, 2015Is there a way i can grant a windows authenticated user say abcadam privilege:
-> to create, execute and alter the stored procedures that will be created by him only:
Point is we do not want the user to execute alter or modify other stored procedures out there for that DB
Integration Services :: How To Access Object Type Variable In Execute Task
Nov 18, 2015In my ssis 2012 package, I have a 'object' type variable with some table like records. I want to do some SQL operations like insert/update on the records in another table based on this 'Object' type variable records. Basically I want to use a MERGE statement with another physical table with the records in the 'Object' type variable.how to map/use the Object type variable in Execute sql task.I am not good in script task. How to utilize this Object variable in a Execute sql task? Â
View 9 Replies View RelatedGetting Access Denied To FileName Error When Using The Execute Sql Task (With File Connection) Into A Foreach Loop Container.
Jan 18, 2007Hi ALL,
Getting Access Denied To FileName Error When Using the Execute Sql Task (With File Connection) into a Foreach Loop Container.
Please Note :
I have a folder containing .sql files. I have to dynamically loop through the files and send them as a File connection Folder to the Execute Sql Task.
When I run this Package I am getting the follwoing error :
[Execute SQL Task] Error: An error occurred with the following error message: "Access to the path 'C:ProjectsFuzzy Lookup DataFlow ExampleScripts' is denied.".
Also I have logged in to the machine as Administrator and to Sql Server with sa.
Please help.
Thanks.
Regards,
Salil
How To Fetch The Recrods From MS Access And Using It In Script Task Using Control Flow Tools(Execute SQL Task)
Jun 14, 2006Hi
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
Thanks & Regards
Deepu M.I
Execute Package Task: Error 0x80070005 While Preparing To Load The Package. Access Is Denied.
Jun 8, 2007I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
Execute SQL Task: Executing The Query Exec (?) Failed With The Following Error: Syntax Error Or Access Violation. Possible F
Jan 23, 2008Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
Help! The Transaction Log Is Full Error In SSIS Execute SQL Task When I Execute A DELETE SQL Query
Dec 6, 2006Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
Looking For A Way To Refer To A Package Variable Within Any Transact-SQL Code Included In Execute SQL Or Execute T-SQL Task
Apr 19, 2007I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
SSIS Execute Package With Execute Out Of Process = True Causes ProductLevelToLow Error
Mar 6, 2008
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
Conditional Execute By Execute SQL Task Return Value?
Jun 25, 2007I have a SSIS package contains an "Execute SQL Task". The SQL will raise error or succeed. However, it sounds the package won't pick up the raised error?
Or is it possible to conditional run other control flow items according the the status of SQL task execution?
Execute A SP In The Execute SQL Task
Jan 25, 2007I am trying to execute a SP in the execute SQL task in SSIS 2005..
but I keep getting an error:
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Load_Gs_Modifier_1, Execute SQL Task: Executing the query "exec Load_GS_Modifier_1 ?, ?" failed with the following error: "Could not find stored procedure 'exec Load_GS_Modifier_1 ?, ?'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Load_Gs_Modifier_1
SSIS package "Package.dtsx" finis
I have set up two user parameters: startdate and enddate.. I am not sure what I am doing wrong????
Import Access Tables (set Up As Pass-through Table Types To Oracle )--OLE DB Connection To Access Cannot See Them
Mar 17, 2008Access Connection
create a new Connection Manager by right-clicking in the Connection Managers section of the design area of the screen. Select New OLE DB Connection to bring up the Configure OLE DB Connection Manager dialog box. Click New to open the Connection Manager. In the Provider drop-down list, choose the Microsoft Jet 4.0 OLE DB Provider and click OK.
Browse to the Access database file and connection set up---all good!!!
Dataflow task
Add an OLE DB Source component
Double-click the icon to open the OLE DB Source Editor. Set the OLE DB Connection Manager property to the Connection Manager that I created . Select Table from the Data Access Mode drop-down list.
I cannot see the tables set up as set up as pass-through table types to a Oracle 9i db
Any ideas please help
thanks in advance
Dave
Data Access :: Server Rejected The Connection - Access To Selected Database Has Been Denied
Jun 10, 2015I have recently upgraded to SQL2014 on Win2012. The Access front end program works fine.
But, previously created Excel reports with built in MS Queries now fail with the above error for users with MS 2013. The queries still work for users still using MS 2007.Â
I also cannot create any new queries and get the same error message. If I log on as myself on the domain to another PC with 2007 installed it works fine, so I don't think it is anything to do with AD groups or permissions.
Data Access :: Insert Rows To MS Access 2013 Without Listing Column Names
Nov 12, 2015We need to insert data/rows from a SQL Server 2014 database into MS Access database. The problem is, there are so many columns (100+) in the table and there are so many insert transactions of this kind (from different tables) that it is not very easy to write the code in VB.NET that lists all column names.
Both the Access and SQL Server tables have the same number of columns and the equivalent data types, so inserting is not really the problem. It's just that is there a way to do an insert statement in T-SQL that does not name all the columns?
Database Schemas And This Statement Has Attempted To Access Data Whose Access Is Restricted By The Assembly.
Jul 14, 2005Hello.
View 5 Replies View RelatedMulti-user Access Through A Data-access Layer/remoting Server
Oct 30, 2007Hi guys,
I've been developing desktop client-server and web apps and have used Access and SQL Server Standard most of the time.
I'm looking into using SQL CE, and had a few questions that I can't seem to get a clear picture on:
- The documentation for CE says that it supports 256 simultaneous connections and offers the Isolation levels, Transactions, Locking, etc with a 4GB DB. But most people say that CE is strictly a single-user DB and should not be used as a DB Server.
Could CE be extended for use as a multi-user DB Server by creating a custom server such as a .NET Remoting Server hosted through a Windows Service (or any other custom host) on a machine whereby the CE DB would run in-process with this server on the machine which would then be accessed by multiple users from multiple machines??
Clients PCs -> Server PC hosting Remoting Service -> ADO.NET -> SQL CE
- and further more can we use Enterprise Services (Serviced Components) to connect to SQL CE and further extend this model to offer a pure high-quality DB Server?
Clients PCs -> Server PC hosting Remoting Service -> Enterprise Services -> ADO.NET -> SQL CE
Seems quite doable to me, but I may be wrong..please let me know either ways
Thanks,
CP
Access Denied Error Message Using Xp_cmdshell To Access Network Share
Jan 14, 2007When running the following statement in SQL 2005, I get the error message "Access is denied":
exec master.dbo.xp_cmdshell 'TYPE \SERVER-BSHAREFILE.TXT'
The following are true about the network:
The SQL Server is installed on SERVER-A.
SERVER-A and SERVER-B are Windows 2003 servers on the same Windows 2003 domain.
The SQL Server and SQL Server Agent services are running under the domain account SQLSERVICE.
SQLSERVICE is a member of the Domain Admins group.
The Domain Admins group is part of the local Administrators group on SERVER-B.
The SQLSERVICE account has also explicitly been given Full Control to the folder referenced by \SERVER-BSHARE
xp_cmdshell use has been enabled on the SQL Server.
If I run the following command in SQL:
exec master.dbo.xp_cmdshell 'whoami'the following is returned: DOMAINSQLSERVICE
If I change the command to access the c: drive instead of a network drive, it executes successfully.
Can anyone shed some light on why I still cannot access any of the files in this folder using xp_cmdshell?
Tim
Automating IUSR Access Priviledges With Anonymous Access For SRS Virtual Directory.
Feb 22, 2008We have an application that requires write settings to reportserver virtual directory for the IUSR account when anonymous is turned on during the install. Once the install is complete, we lock down the IUSR account so that it only has browse access to the virtual directory when enabling anonymous access.
We automate the uninstall and install of our daily builds and I'm trying to figure out if I can automated this process somehow either through command line utility or in vbs.
Your help is greatly appreciated...
Eric
List Groups That Have Access To Application And Use Grid Format To Show Access To Specific Tables
Jun 23, 2014i am currently working on designing a database for a bank as a school project for my database class. We have to draw up an entity relationship diagram, Sql tables, database size estimate etc. I am currently working on the security portion of the project. I need to list the groups that have access to my application and use a grid format to show access to specific tables.
I am currently working on designing a database for a bank as a school project for my database class. We have to draw up an entity relationship diagram, Sql tables, database size estimate etc. I am currently working on the security portion of the project. I need to list the groups that have access to my application and use a grid format to show access to specific tables.
Role Loans Payments Transactions Accounts Customer Emplo
Database Admin SUID SUID SUID SUID SUID SUID
Branch Manager SUI SUI SUI SUI SUI SUI
Internal Auditor S S S S S S
Loan Officer SUID SUI SUI S S
Tellers S S S S SU
Customers U
How To: Determine If Current Windows User Has Login Access, Database Access And If They Are A Member Of A Specific DB Role.
Mar 25, 2008
I need to determine the following about the current authenticated Windows domain user who is trying to access a SQL Server via a trusted connection.
1 Has the current user been granted login access to the trusted SQL Server?
2 Has the current user been granted access to a specific database?
3 Is the current user a member of a specific database role such as (DB_ROLE_ADMINISTRATORS)?
Thanks,
Sean