Hello,
I have a DTS job that retrieves data from a different server. When I manually run the DTS job, it executes fine, but when I run it from an SQL job it fails regardless of the owner I use to run the SQL job under.
I ran the same DTS package from another computer which has SQL client installed and it ran fine.
Does anyone know what could be the reason for failure when running the DTS job from the SQL job from the server?
Thanks,
Adrian.
Hello!
I'm trying to use mirroring + snapshots for reporting on a large database.
I've set up the mirrored database and created a snapshot.
Everything looks fine unil a run some queries on the snapshot.
Some queries work some don't. the error is this:
Msg 954, Level 14, State 1, Line 1
The database "test" cannot be opened. It is acting as a mirror database.
From what i can tell when he's trying to use an index for the query, the engine tries to use it from the mirror database.
eg.
this query works fine:
select top 10 * from dbo.table1
this query gives the error:
select top 10 * from dbo.table1 order by col1 desc
What's going on and how can i make this setup work?
thanks.
Hello:
I have a package which runs fine from the client but not the server (see error below). I am logged into the client with my domain account, and the package runs under a proxy using that same domain account (for now). The MS Access db I am trying to pull from is on a non-domain computer, and I have created a Y: mapped drive on both the client and server that access a share on that machine where the Access database lives--I created the mapped drive using the "different user" option, and used a local account on the non-domain computer to create the mapped drives.
On the server, when logged in as my domain account, I can use the y:MyDB.mdb you can see below in Start | Run to hit the Access database. Why can't the package also see this file when running on the server?
Code Snippet
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "'y:Mydb.MDB' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.". End Error Error: 2008-02-05 02:35:56.26 Code: 0xC020801C Source: Cost Cost [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "MyDB" failed with error code 0xC0202009. There may be error messages posted before this with more informat... The package execution fa... The step failed.
Thanks,
Kayda
I need some help from you on a problem with SQL Server Agent that I believe many of you have experienced. When searching on the web I find some loose answers, but it would not solve my problems. So here is my story.
1. I have created two SSIS packages, package 1 and package 2. Both packages have a Execute SQL Task making a select sql statement to a table, say Customer in AdventureWorks DB. Package1 also makes a Execute Pacakge Task to Package 2. Both packages have protectionlevel property set to EncryptSensitiveWithUserKey
2. Then I created two package configuration files per package, one indirect xml configuration and one xml configuration file. The former I created an environment variable called pack1, which was specifying the path and file name of second config file. Likewise, I did for package2. Maybe I could have reused thie first configuration file, but I am not sure since package1 calls package2.
3. Now I build and deploy my packages. Then I run my manifest file, going through the deployment wizard setting the necceccary properties like server name, user, password, I have also create the same environment variables on the deployment machine. I ensure that the package1 and package2 can be run under integration services (file system). And both package works. So far so good
4. Now I want to create a SQL server agent job that runs package1 and package2. Here I found an article that decribed How to Schedule and Run a SSIS package ( DTS ) Job in SQL Server 2005 http://www.codeproject.com/useritems/Schedule__Run__SSIS__DTS.asp
5. I created a job executor account and then Create SQL proxy account and associate proxy account with job executor account as described. I created a new ssis job, specifying type ssis integration services, run as proxy, setting package source to SSIS package store, naming the server and package name (package2).
6. Now, I try running job1 which runs package2. ANd it works. I was aware if I needed to give file permission on users (read and execute) on my dtsx/dtsconfig/log files. So far so good
7. Now, I try to run job test which runs package1 (which also runs package2). But now the job fails :-(. The job runs for some seconds, but fails. I have to say that I have some script tasks with message boxes inside!!! hope this doesn't matter. I have created all neccessary accounts, proxies, credentials and so on. here is the view history
Date 17.10.2006 00:50:53
Log Job History (test)
Step ID 1
Server ABEO-GEIR
Job Name test
Step Name test
Duration 00:00:07
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: abeo-geir
as_jobuser. The package execution failed. The step failed.
Continue: This error is well known for you. It has been mentioned in many postings. Well, how do I go from here. Setting logging on the job results in only this information
PackageStart,ABEO-GEIR,ABEO-GEIR
as_jobuser,Package1,{3F5BD166-D24B-4838-B3F1-018B6C2C7523},{8E1B8E45-7F1D-4C24-852C-2694F993E6D2},17.10.2006 00:59:40,17.10.2006 00:59:40,0,0x,Beginning of package execution.
PackageEnd,ABEO-GEIR,ABEO-GEIR
as_jobuser,Package1,{3F5BD166-D24B-4838-B3F1-018B6C2C7523},{8E1B8E45-7F1D-4C24-852C-2694F993E6D2},17.10.2006 00:59:41,17.10.2006 00:59:41,1,0x,End of package execution.
Well, I read some place that I could run the job as type operating system (cmdexec). Here i could not choose Run as, but had to select SQL SErver agent account. NOw I got this message
Date 17.10.2006 01:05:21
Log Job History (test)
Step ID 0
Server ABEO-GEIR
Job Name test
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. The Job was invoked by User sa. The last step to run was step 1 (test).
As you see, I can't come any further. I NEED HELP FROM YOU. I AM STUCK. I know many of you have solved this and I hope you can guide me through thise. I don't know how many hours or days I have used on this.
Regards
Geir F
I'm trying to figure out how to set up SQL Express so I can start learning SQL. I've installed SQL Express, but when I type "sqlcmd -S ServerSQLExpress," I receive the following error:Microsoft Windows XP [Version 5.1.2600](C) Copyright 1985-2001 Microsoft Corp.C:Documents and SettingsUsername>sqlcmd -S ServerSQLExpressHResult 0xFFFFFFFF, Level 16, State 1SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
View 9 Replies View RelatedI have created an event that contains a Data flow tasks with OLE DB source & Excel Destination.
This event is executed/triggered based on an execute SQL task failure in the control flow Sequence container.
However, when I execute the Data Flow task of the Event Handler, it runs successfully but fails when I execute the whole package.
I get the below error message:
[OLE DB Source [21]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "TK463DW" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have tried setting the property 'DelayValidation' to 'True' on all the Control Flow and Data Flow tasks on the package and on the Event Handler, but still I could not fix this.Not sure What I am missing.
I get the following message when I execute a mantenance plan to delete files older than 1 day.
Error # -1073548784
Executing the query "EXECUTE master.dbo.xp_delete_file 0,N'',N'',N'2007-09-30T07:56:09'
" failed with the following error: "Error executing extended stored procedure: Invalid Parameter". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any help would be appreciated!!
I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
dtexec /f "C:Program FilesMicrosoft SQL Server90DTSPackagesIntegration Services Project estcom.dtsx"
pause
Why it's not running with SQL Server Agent???
In my environment, there is maintenance plan configured on one of the server and while running DBCC checkdb on a database of size around 200GB, log file usage of tempdb is increasing and causing the maintenance job to fail.
What can I do to make the maintenance job run successfully, size of the tempdb database is only 50GB and recovery model is set to simple. It cannot be increased as the mount point on which it is residing is 50GB.
If I start a long running query running on a background thread is there a way to abort the query so that it does not continue running on SQL server?
The query would be running on SQL Server 2005 from a Windows form application using the Background worker component. So the query would have been started from the background workers DoWork event using ado.net. If the user clicks an abort button in the UI I would want the query to die so that it does not continue to use sql server resources.
Is there a way to do this?
Thanks
One of my stored procs, taking one parameter, is running about 2+ minutes. But if I run the same script in the stored proc with the same parameter hardcoded, the query only runs in a couple of seconds. The execution plans are different as well. Any reason why this could happen? TIA.
View 6 Replies View RelatedWe are trying to install the Standard Edition of SQL Server 2005. We already have SQL Express installed. Standard won't install and Express won't uninstall.
We have tried every suggestion we can find and some we made up. When we try to install Standard, we get to the bit where you choose what you want to install and the only thing available is workstation components.
There are so many cases of this on the Internat that I can't believe MS have not solved the issue. And I am stunned that they want to charge us more money to talk to us about how to fix something we just paid them an arm and a leg for!
What do I need to tell you to get some idea of where to go next with this?
Hello Reporting Services 2005 users or Reporting Services Team,
I have done everything to get pass this error but no luck.
My setup is :- WIndows 2003 Standared Edition SP1
Sql Server :-
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Reporting Services starting SKU: Standard.
From the Reporting Services Configuration Manager:
I can see all other things configured except Encryption Keys(blue sign)
Initialization(Grey sign) and Execution Acct(Yellow sign)
My windows Service Identity is using :
NT AuthorityNetworkService
Builtin Acct :NetworkService
Web Service Identity :-
ASP.NET Service Acct :- NT AuthorityNetworkService
DataBase Setup :- Credentials Type :- Service Credentials
I have also done everything from here thanks to Göran
http://stevenharman.net/blog/archive/2007/03/21/Avoiding-the-401-Unauthorized-Error-when-Using-the-ReportViewer-in.aspx
and
http://support.microsoft.com/default.aspx?scid=kb;en-us;896861
and
http://forum.k2workflow.com/viewtopic.php?t=619&
If you guys any solution for this please let me know.
I was wondering could this be a scale-out deployment issue ?
I also get the error when setting up the DataBase Setup :
Although saving the database connection info succeeded the The report server cannot access internal info about this deployment to determine whetherthe current con fig is valid for this editionThis could be a scale-out deployment and that the feature is not supported by this editionTo continue use a diff report server database or remove the encription keys
My Error log file is below:-
w3wp!webserver!5!16/05/2007-14:52:46:: i INFO: Reporting Web Server started
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Reporting Services starting SKU: Standard
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Evaluation copy: 0 days left
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Running on 1 physical processors, 2 logical processors
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!library!5!05/16/2007-14:52:48:: i INFO: Call to GetPermissions:/
w3wp!library!5!05/16/2007-14:52:48:: i INFO: Catalog SQL Server Edition = Standard
w3wp!library!5!05/16/2007-14:52:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
Hi,
I have suddenly run into a problem. I have a DTS which was running well till few days ago. Now when ever it runs, it crashes the server, any body
have any idea why???
Thanks in Adv.
Nirmal
Hi all,
Sql server 7
I have created a Web assistant job which select
and displays data from a table (very small amt of data)
on to the webpage. the job is schedule to run
every 1 minute. the job is not running, in job view
history its gives the error msg
"could not open the output file" 16821 Error no.
pls suggest
Awaiting for ur reply
TIA
Adil
I have a DTS job that runs every hour.
it truncates destination table and copies from the source table.
it has failed with the following error in view job history
"error-214721900(80040E14);provider error 14262.(37B6)"
error source Microsoft ole db provider error
pls help in this
how can i solve this, i tried restarting the job but its failing again.
Good Morning,
I've been running into a small problem. There are two people that usually create local packages to be executed by the DTS. Either my boss or I. The problem that I have been running into is, there are some local packages that will not execute when I try to run them. These packages are that my boss has created. When she runs them they work fine. But when I run them they just don't run. The only way I can run the local package is if I log in into the server and run it from there.
The error that I keep getting is:
Unspecified Error
[Microsoft][ODBC Driver Manager] Data Source Name not found and no default driver specified.
What would I be able to do so that I can execute this local package from my computer?
Hey guys,
I'm trying to run a job that will convert a load of data but it keeps failing at the first step. If I run the scripts in each step on their own then they run fine. The error message I get is 'The process did not produce any output. Process exit code 1. The step failed'. I think this may be some kind of security problem but I cannot see where. The command I'm using for the first step is as follows:
OSQL -SCRLONSQL01 -DINPRO -Usysadm -Pcarpmaels -i"C:Program FilesCPA Inpro DatabaseScriptsdropinteg.sql" -o"C:conversionoutputdropinteg.txt" -n
Any pointers would be most helpful.
Hi,
I am trying to create a job to run a ssis package.
The job fails. Looking at the history log, there is no proper information on why the job failed. It just says: The job failed. The job was invoked by user ...
please note that the ssis package runs fine on it's own i.e. in the designer by pressing the run button.
Thanks
I have a package which works fine when i ru if from VS but when i schedule it iam getting an error on one of the data reader source. I am not able to figure it why its giving error when its working fine from VStudio
Message
Executed as user: NAdbasvc-alticor. ... 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:28:25 AM Error: 2007-07-10 11:28:26.21 Code: 0xC020838F Source: Staging LKPDataReader Source [1] Description: An error occurred executing the provided SQL command. End Error Error: 2007-07-10 11:28:26.21 Code: 0xC004706B Source: Staging DTS.Pipeline Description: "component "LKPDataReader Source" (1)" failed validation and returned validation status "VS_ISBROKEN". End Error Error: 2007-07-10 11:28:26.21 Code: 0xC004700C Source: Staging DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-07-10 11:28:26.21 Code: 0xC0024107 Source: Staging Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:28:25 AM Finished: 11:28:26 AM Elapsed: 0.906 seconds. The package execution fai... The step failed.
has anyone come across same issue, help
Hello,
I'm trying to get a handel on ASP.NET and I've put together a new SQL connection to display a view inside of a datagrid.
When I go to run it (before or after compile) I get the error:
------------------------------------------------------------------------------------------------------
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection
Line 57: Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Line 58: Dim ds As New DataSet
Line 59: SqlDataAdapter1.Fill(ds)
Line 60:
Line 61: DataGrid1.DataSource = ds
Stack Trace:
[SqlException: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
System.Data.SqlClient.SqlConnection.Open()
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState)
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
jtio8.WebForm1.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootjtio8WebForm1.aspx.vb:59
System.Web.UI.Control.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Here is the connection string I am using:
Me.SqlConnection1.ConnectionString = "workstation id=MyWorkstation;packet size=4096;integrated security=SSPI;data source=MyServer;" & _
"persist security info=False;initial catalog=Northwind"
-------------------------------------------------------------------------------
Now, I've created a new login to the SQL server using the ASPNET user id (as well as several others for testing), set up the premissions for each UID and I'm still getting this error.
I have also tried to setup the user info in the connection string by doing the following:
Me.SqlConnection1.ConnectionString = "user id=aspnet;password=;workstation id=MyWorkstation;packet size=4096;integrated security=SSPI;data source=MyServer;" & _
"persist security info=False;initial catalog=Northwind"
Any ideas?
Thanks,
Dale
Hi all;
I am getting the following error when I try to connect to my local SQL server from my ASP.NET application
Server Error in '/pelin' Application.
Cannot open database requested in login 'pelin'. Login fails. Login failed for user 'sa'.
for other users also
my connection string is in web.config file:
<appSettings>
<add key="constr" value="server=ARGE057VSDOTNET2003;UID=sa;pwd=sa;database=Test;"></add>
</appSettings>
can you help me please thanks..
Hello,I'm trying to create a new SQL Express database in VWD, and I get the error: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.What is this error all about? I don't understand it.Thanks.
View 1 Replies View RelatedI have this line of db connection code that works in vb.net but not in c#:
con = new ADODB.ConnectionClass(); //for vb.net I used ADODB.Connection() instead and it workscon.Open("Provider=SQLOLEDB;" + ConfigurationSettings.AppSettings["connectionString"]);
Error message:CS1501: No overload for method 'Open' takes '1' arguments
Searched the web but can't find the answer... Does anyone have a clue?
This is a proc that was working on production 7.0 server but is being tested on a 2000, what's changed?
TIA
JeffP....
I trying to FTP Files about 37 files each 3 GB. The FTP is just stuck. It fails half way through. I use IIS 4.0 in Clustered Network and MSSQL 7.0. IIS 4.0 does not support transfer of files more than 4 GB.Is there any other tools that I can use to FTP the dump files. Does anyone have any ideas.
View 1 Replies View RelatedSQL SERVER 7.0
==============
Hi All!
I have a job that has 2 steps.In the first step iam using a group by clause.The column on which I use group by, sometimes has null values.During such case the job is failing at the first step throwing a warning.
Warning: Null value eliminated from aggregate. [SQLSTATE 01003]
1)If i want to override this, is it appropriate to use set ansi_warnings off for my session?
2)If there is some other error will that be detected or will that be overridden too?
Any help appreciated!
TIA
Regards,
kinnu
I have a script that is generated from main frame.
This script updates about 113,000 rows.
I keep getting an error message 225, 16.
From Books on line
225 "Refrenced object (name %*.s) dropped during query optimization"
16 Too many table names in the query. The maximum allowed is %d. knowing that it updates only one table this message does not make sense.
It is on sql server 6.5.
Any help will be very much appreciated.
Thanks in advance
Al
When I schedule a DTS export job,I am getting this error. But if I run it with 'run immediately' option while creating the job,it runs fine! Any clue??
Thanks.
''DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: Transfer SQL Server Objects DTSRun OnError: Transfer SQL Server Objects, Error = -2147221504 (80040000) Error string: Error source: Help file: Help context: 0 Error Detail Records: DTSRun OnFinish: Transfer SQL Server Objects DTSRun: Package execution complete. Process Exit Code 1. The step failed.''
when I create a DTS export job,it is running o.k when I select 'run immediately' option.But the same job is not running as a job.Any idea???
Thanks for any help.
Hi ,
While running the load cmd - 'Load database dbname1 from disk='c:empdump1.dat'
through ISQL I am getting the following error
1 transaction rolledback dbid error 7.But when I tried restoring using enterprice manager UI it is working fine.Any body knows why it is happening like this .
Thanks in advance
Jiji
I set up a DTS package to run every night on my SQL 7 Server.
It is supposed to write a text file of modified rows every night.
It was working fine until I changed the password for sa, now it
fails. Also in Enterprise Manager, when I try to look a the package
properties, I get a "login failed for user sa" package error.
What to do?
I have stored procedure that uses the xp_cmdshell procedure to use the dts run to run some dts packages. This package exports data into an Access 97 database. When I run it I get this error:
Error: -2147467259 (80004005); Provider Error: -533791822 (E02EFBB2)
Error string: Could not update; currently locked by user '(unknown)' on machine ''.
Error source: Microsoft JET Database Engine
Help file:
Help context: 5003218
If I right click on the local package and select execute it runs with no problem. Any ideas what is going on?