SQL Mail MAPI Error
Mar 13, 2001
Hi,
I recently installed MS SQL server version 7.00.623 on a Win2k server. I installed Outlook 2000 and had the Exchange Administrator create a mailbox in order to use SQL Mail and SQL Server Agent alerts when jobs fail. The Outlook mailbox was set up with a different name then the SQL Server Agent so I created a new account for the SQL Server Agent to match the name of the mailbox. I can send and receive mail from Outlook when logged into the server but I receive the following error when testing the profile in SQL Mail and SQL Server Agent properties:
"[260] Unable to start mail session (reason: Unable to logon (reason: Unable to get the default MAPI Message Store due to MAPI error 273: The information store could not be opened); check the mail profile and/or the SQLServerAgent service startup account)"
The SQL Server Agent account is a NT User type, uses NT Authentication and has sysadmin server privledges and I am attempting to configure the mail while logging in to the server via Terminal Services Client using this account. I have tried to stop and restart the SQL Server Agent services but still receive the same error. When I log into Outlook, I receive a dialog box titled "Enter Password" that asks for a user name, domain name and password. The Exchange Admin. set this up so I have to use my user name, domain and password.
Do I need to install a service pack for SQL Server?
Did changing the SQL Server Agent account cause this to fail?
Does anyone have any insight on why I cannot get SQL Mail configured?
Thank You So Much
View 2 Replies
ADVERTISEMENT
Nov 7, 2000
I set up e-mail on my SQL server (7.0) via SMTP.
I installed Outlook '97. Typical Installation.
Everything was working fine, for couple of days,
then I got Dr. Watson messages, about MAPI.
Dr.Watson
The application, exemapisp32.dbg, generated an application error The error occurred on 11/ 7/2000 @ 11:35:48.437 The exception generated was c0000005 at address 6e4f2630 (<nosymbols>)
Then SQL will give me this message:
Unable to read local eventlog (reason: The data area passed to a system call is too small).
Anyway, try to reinstall Outlook '97, but the problem continues.
Any help, will be greatly appreciated.
View 1 Replies
View Related
Jun 28, 2000
Hello,
I would like to send e-mails from MS SQL Server 7. Does Linux accept MAPI client e-mails and deliver them? And if so, how does one set it up?
Thanks,
Denise
View 2 Replies
View Related
Nov 22, 1999
Hi friends,
I have Exchange & sql 7.0 on the same box. I have configured sqlserver
and sqlserveragent for the same nt login. Also a Mail profile is created and assigned to SQL-MAIL & SQL-AGENT.
I have a back-up job in SQLSERVER and the notification is set to exchange mail box. For the first time after restarting the exchange services, the notification works fine. But for the subsequent job executions, the notification failed and the message is "MAPI LOGIN FAILED".
Can any one help me..
Thanx in advance.
regards
MANI
View 1 Replies
View Related
Apr 23, 2001
I have not yet set up SQL2K mail -> Notes, but I see in Q263556 a warning regarding extended MAPI and non-Exchange servers.
Just wondering if anyone is using a SQL2K - Notes MAPI profile -- and if any reliability issues have come up?
Thanks in advance
View 1 Replies
View Related
Sep 16, 2005
Scenario:DBMS: SQL Server 2000OS: Windows Server 2003Goal:Enable SQLMAIL via Internet MailProblem:How do I set up the MAPI profile for the SQL Server service account?On Windows 2000 Server, I can use "Control Panel"/"Mail" tocreate a MAPI profile for the SQL Server service account, and thenreference that profile for SQLMAIL in SQL Server and SQL Server Agent.But on Windows Server 2003, there is no "Mail" applet in "Control Panel".How do I create a MAPI profile, for the SQL Server service account,on Windows Server 2003?
View 5 Replies
View Related
Aug 10, 2001
I'm trying to send a Test Email to Operators defined in a SQL 7.0 server (currently on SP2). And get the following error message:
"Error 22022: SQLServerAgent Error: MAPI error: Table too big."
We've checked the email profiles (also performed test on SQL MAIL) and can stop/start SQL Mail successfully. Verified that the accounts are correctly identified with appropriate permissions. MSDB is 150MB with no table that looks abnormal in size.
Has anyone come across this situation? Please let me know. THANKS!!!
View 2 Replies
View Related
Feb 2, 2007
I've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM
Log Database Mail (Database Mail Log)
Log ID 402
Process ID 3936
Last Modified 2/2/2007 8:35:00 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
What step am I missing?
View 1 Replies
View Related
Mar 7, 2007
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
View 1 Replies
View Related
Feb 6, 2008
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
View 7 Replies
View Related
Aug 13, 2000
I am trying to install SQL Mail to send automatic system messages. The SQL Mail service starts but when I try to test it I get the following error. Does any one have any solution to this problem?
Error: A Mapi error ( error number 273) occured. Unable to get the default MAPI message Store due to MAPI error 273. The information store could not be opened.
View 2 Replies
View Related
Aug 13, 2000
I am trying to install SQL Mail to send automatic system messages. The SQL Mail service starts but when I try to test it I get the following error. Does any one have any solution to this problem?
Error: A Mapi error ( error number 273) occured. Unable to get the default MAPI message Store due to MAPI error 273. The information store could not be opened.
View 1 Replies
View Related
Aug 7, 2000
I created a new MAPI profile on the server, and it seems to work fine with Outlook. I also dropped the previous default MAPI profile.
Now, when I go to the EM SQLAgent Properties, the only MAP profile offered in the SQLMail drop-down is the old, deleted profile. Also, only the old profile comes up with xp_get_MAPI_profiles.
How can I get SQLAgent to recognize that I've set up a new mail profile?
View 1 Replies
View Related
Jan 8, 2002
I have several dts packages that run just fine through a third party scheduler. I then put a mail task on them to tell me if the package succeeded or failed. Every time the scheduler gets to the mail task it fails and logs a mapi login failure error. When I execute the dts package on my local box it sends the email with no problems. is it a problem with the robot login or is it associated to the profile? any help would be greatly appreciated.
Elizabeth
View 1 Replies
View Related
Apr 12, 2002
My IT manager doesn't like the idea that a production process written in DTS needs Outlook 2000 running for DTS Email. I tend to agree that having an app like Outlook 2000 running in the production machine is kind of tacky. Am I missing something here? Why would MS suggest such a solution? Is there a way to configure DTS and Outlook so Outlook doesnt have to be running as an app?
Chiefley
View 1 Replies
View Related
Jun 1, 1999
I have a situation where a SQL Maintenance Task is running, and suppose to email a report to the sys admin. Currently I am getting a Microsoft SQL-DMO Error 17903, Mapi Login Failure.
I have tested the Outlook 98 application and the profile is set correctly. I have tried to send an email within SQL and I receive the error above. I have carried all activities suggested by Microsofts Online Books. Can anyone suggest where to go from here. All Service Packs have been applied.
Thanks
Chris Le ROY
View 2 Replies
View Related
Jan 22, 2008
Error message "Unable to get MAPI profiles" in send mail task(DTS).
View 4 Replies
View Related
Nov 16, 2007
Hello,
On the development server, I am trying to work with subscriptions . Report Server is windows authenticated.
When no paramters exist for the report, the sucbscription is successful.
But if there are paramters for the report, email delivery fails.
These are not data driven subscriptions.
Did anyone face the same problem ? Can anyone tell me where to start debugging since logfiles just say failure to send the email.
Thanks,
SqlNew
View 2 Replies
View Related
Feb 9, 2005
(Isn't this fun? Type MAPI and SQL into Google and it almost tilts!)
Here is the situation:
1- When SQL Agent starts, it establishes a MAPI session. For some bizarre design reason, it keeps that session open as long as it is running, rather than re-opening the session when it has mail to send. (this can be days, weeks, or months)
2- Frequently, Exchange servers are clustered. When the virtual server moves to a different physical server in the cluster, - or the Exchange server is restarted for whatever reason - the (above) MAPI session of the SQL Agent gets jammed.
3- SQL Agent tries, and fails to send an E-mail saying (for instance) that a database dump has completed (etc.)
4- User posts a question to some forum, asking for help again.
My solution: I created a job to run on a daily basis to restart the SQL Agent, and re-establish the MAPI session. Voila!
The problem: Now we (sometimes) get the message:
[241] Startup error: Unable to initialize error reporting system (reason: The EventLog service has not been started)
This is incorrect - the service was never stopped!
*sigh* No hits in Microsoft or Google - Back to the drawing board.
SO: Can anyone think of a way to *test* the MAPI connection in a job step (without actually sending a message), so that the agent restart job is only executed if the MAPI connection is failing?
View 2 Replies
View Related
Nov 16, 2006
I have create a SSIS package, for data export import process, but if my task get failed then i have to send a mail with proper error description as the SSIS generate in output window.
Can any one sugget me to, how can i store that error desciption in my variable.?
Thanks in advance.
View 5 Replies
View Related
Mar 12, 2001
I'm trying to get sql mail up and running. I am able to get the service started. But when I go under SQL Mail/Properties and test the profile that I created it comes back with the following error. Error 22030 a MAPI error(error 273) occurred. Unable to get the default MAPI Message store due to MAPI error. the information store could not be opened. I am running sql server 7.0. I have set up a profile under the exchange. If I bring up outlook on the server I can send and receive messages. I have the both the mssqlserver and the sqlserveragent running under the same account. If I go under operators and do a test on one of the operators I get the following message. The sqlmail session is not running but I sit it running under enterprise manager. We are using the outlook. Any ideas would be greatly appreciated. Thanks
View 4 Replies
View Related
Sep 7, 1999
I've just set up SQL Mail, and I think it's working -- at any rate, the envelope icon in Enterprise Manager
is green. Problem is, no matter what address I try to mail to, I get an 'Unknown recipient' error.
My input:
xp_sendmail 'srenaker@alexa.com', 'This is a test message.'
The results:
Msg 17914, Level 18, State 1
Unknown recipient: Parameter '@recipients', recipient 'srenaker@alexa.com'
Thanks in advance for any help,
Steve Renaker
srenaker@alexa.com
View 2 Replies
View Related
May 9, 2001
Hi everyone,
I am very new to this and am having a problem with SQL mail. I want to be able to send view or query results via email. I have set up SQL mail and tested it and it works fine for sending notification messages to me. When I go to a query analyzer and issue the xp_sendmail 'jyoungbar@shorehealth.org','this is a test message'
I always get the error that follows:
Server: Msg 18025, Level 16, State 1, Line 0
xp_sendmail: failed with mail error 0x8004011d
I am probably missing something very minor here. Can anyone help me??
Thanks,
Jason
View 1 Replies
View Related
Jun 12, 2008
hi friends.... i had a problem with sending mail using trigger when Update data from a table. Procedure is executed successfully. but when i update record from a particular table. I had a following error xp_sendmail: Either there is no default mail client or the current mail
client cannot fulfill the messaging request. Please run Microsoft Outlook
and set it as the default mail client. (0 row(s) affected)
Can any one explain what's my problem and give me a solution for this.
it's Urgent !!!!!!!
View 1 Replies
View Related
May 25, 2000
Any help on the following error which I am getting when I am trying to set up SQL Mail for Internet Mail with Outlook Express?
Error 22030: A Mapi error(error no 271)occured.Unable to get the default MAPI Message store due to mapi error 271:One or more of the receipients was not found in the address book.
We have Lotus Notes,but not interested in hooking up to it.As we need to have only outgoing mail facility to outside parties through internet,please advice how to connect using SMTP server and outlook express.
Thanks!
View 1 Replies
View Related
Jun 16, 2006
have new sql 2005 install. I thought I setup the mail correctly. I setup an operator and could send test email to operator. I then setup a job to send email to the operator when job completes. Got the error below
Date 6/16/2006 8:45:57 AM
Log SQL Agent (Current - 6/16/2006 8:45:00 AM)
Message
[264] An attempt was made to send an email when no email session has been established
ANy help or links to setting up email on sql 2005
View 1 Replies
View Related
Sep 13, 2007
Ive created an Account and a Profile using Configure Database Mail Wizard.
Ive tried to send an email using this account, but I get this error
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-09-13T17:05:09). Exception Message: Cannot send mails to mail server. (Server does not support secure connections.). )
Can anyone help?
Regards
Steve
Steve Fouracre
View 2 Replies
View Related
May 24, 2000
Any help on the following error which I am getting when I am trying to set up SQL Mail for Internet Mail with Outlook Express?
Error 22030: A Mapi error(error no 271)occured.Unable to get the default MAPI Message store due to mapi error 271:One or more of the receipients was not found in the address book.
Thanks!
View 3 Replies
View Related
Mar 21, 2000
Hello:
We are running mssql 6.5, sp4 for an application.
WE followed the microsoft article: " how to use sql mail in Microsoft SQL Server 6.5 with Microsoft Outlook and Microsoft Exchange Server. WE also followed the suggestions outlined in document Q153159:" Troublshooting SQLMAIL with Microsoft Exchange Server.
After following all of the instuctions in both documents we get an error message of 17951:'Failed to start Microsoft Mail Session' when we click on sqlmail under server name in Enterprise Manager.
My network adminsitrator and I are both stumped why this doesn't work.
Has any one encountered this before? How do we resolve this?
Any information which can be provided will be greatly appreciated. THanks.
DAvid Spaisman
View 1 Replies
View Related
May 2, 2008
hi
i have use database mail in sql server2005 to send mail.
i have complete all step to configure databasemail.but test the mail
the error is "database mail stoped.Use sysmail_start_up to start database mail .
View 8 Replies
View Related
Jan 10, 2007
hello all,
I just created a very simple package in SQL 2005 using the Send Mail task - i made a connection manager & specified the Exchange server - and then ran the package and i got the below message: I am not sure what i did wrong since the message is pretty general. Anyone help would be very appreciated. Thanks
SSIS package "Test.dtsx" starting.
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.".
Task failed: Send Mail Task
SSIS package "Test.dtsx" finished: Success.
View 1 Replies
View Related
Jul 20, 2005
I've got a job that sends out the results of a stored procedure in anemail via xp_sendmail. The job code is as follows:DECLARE @rlist varchar(1000)Declare @Q varchar(100)Select @Q = 'EXEC impact_exec..TLD_Reconciliation'Declare @Sub nvarchar(60)Select @Sub = 'TLD Reconciliation - Condensed Report'SELECT @rlist = 'jmiller@wbhq.com'exec master..xp_sendmail @recipients=@rlist,@query=@Q, @subject=@SubThe error message I get when running this in Query Analyzer is:ODBC error 7410 (42000) Remote access not allowed for Windows NT useractivated by SETUSER.In Enterprise Manager the owner of the stored procedure in question isdbo. Our SQL guru here suggested I change the owner of the storedprocedure from dbo to myself.I did that and got a warning message that changing the owner willbreak connections. (I'm paraphrasing here because I don't rememberthe exact wording of the warning.) Anyhoo, after changing the owner,and then trying to run the code in Query Analyzer I got the errormessage that the stored procedure could not be found.I'm not sure what to do here. I've never seen the error messagebefore. This same query worked just fine a couple of days ago.Any ideas?Thanks,Jennifer
View 1 Replies
View Related
Sep 20, 2006
I have a script task in which I check the size of a file.
If the size of a file is greater then 0 KB then I need to send this file as an attachment using send email task.
If size is equal to 0 KB then I don't want to send email at all.
In the script task, I have a flag(@sFileExists) which i set to true in case of size of file greater then 0 and false in other case.
I am using a precedance constraint (Expression : @sFileExists=true) and condition is logical AND.
After script task based on the condition (@sFileExists=true) I am using the send email task for sending the email.
But I am not receiving the email. Please sugest where I am wrong.
Please note that the send email task is working all-right separately.
View 1 Replies
View Related
