SQL Mail And SQL Agent Mail @!~$%!%#^$%&&^#&&#%
Jul 20, 2005
I have been reading everything i can find regarding sql mail and sql
agent mail.
We have a win2k server, sql 2000 and NO, NO, NO exchange server(all up
to date on service packs).
I have tried repeatadly for days to make this work, and have had no
luck so far.
1. I have a valid profile that tests fine in sql agent and via sql
mail test buttons.
2. I have logged in to the box under that new domain account to
install outlook and configure all the remaining options.
3. I have set both the mssqlserver service and the sqlserveragent
service to run under the domain account that coincides with our pop3
email server, and restarted both of them.
4. I have installed outlook 2002, and I can send and receive emails
just fine from our sql server.
5. As soon as I try to test an email from within a job, the test
fails.
All I wanted to do was just be notified if a job fails. The amount of
time lost on what should have been a 30 minute project is
unbelievable!!!
If anyone has some suggestions, other than the obvious, please let me
know.
Thanks,
Dave
View 3 Replies
ADVERTISEMENT
Jul 7, 2003
Hello Everyone,
I am trying to configure SQL MAIL and SQL SERVER AGENT MAIL feature of SQL SERVER 2000 with Lotus Domino server (Not Microsoft Exchange). Every thing goes fine and it works also. Problem starts when I try to restart SQL Agent Service. It hangs and the status of service remain 'starting'...
Also the size of the sqlagent service process goes upto 12MB. I don't understand why? Can any one help me in solving this problem.
I am using Windows 2000 Advanced Server and SQL Server 2000 with SP3. Domino client is R5.0.5 and Outlook 2000.
View 14 Replies
View Related
Mar 6, 2005
Does anyone know how to send email alert from SQL?
Thanks in advance.
View 3 Replies
View Related
Oct 27, 2000
I setup a domain user account and e-mail account for the sql agent. When I want the agent to mail me a message
when something happens it puts it in the out box but does not send until I pull up the outlook express and ping the server to send recieve.
If I don't have outlook express running in the taskbar, it won't send the message at all. The e-mail is configured as an internet mail component.
Any suggestions??
View 2 Replies
View Related
Mar 7, 2001
I have a daily task set up to email a report to me. When I go to look at the jobs it says it is still executing after a number of hours. I Can't stop the job with out stopping SQL Agent. I can't stop SQL Mail. If I stop the SQL Agent I can't start it again. I try to open Outlook (98) but it won't open either. Can't view the properties of Outlook either. Only way to cure this is to reboot the server. The account we are using to start SQL and SQL Agent is a FDomain Admins account. When I try to log off the server I get and error message saying olemainthreadwndname is not responding. Any help would be very much appreciated.
View 1 Replies
View Related
Mar 8, 2005
Has anyone's SQLAgent ever hung up becuase of SQL Mail and if so what did you do to correct it?
Tom
View 2 Replies
View Related
Apr 15, 2004
My sql agent mail suddenly stops working. The mails are usually going to the people. But once in a while I have this wierd problem of mails not reaching the recipients. Happens once in 2-3 weeks, starts working fine if I restart the server. When I open the Outlook client, the outbox is also empty, but still the mails are not gone.
If I Test the mail profile in the sql agent properties, it gives time out error. Everything becomes okay if I restart the server.
OS: Win 2K sp4
Server : SQL 2000 SP3
Account : Verified that the account is in Administrator Group
There is only one MAPI32.DLL file and is in system32 folder.
The wierd part is everything works if I restart..any help would be much appreciated.
View 1 Replies
View Related
Feb 8, 2008
Hi I have sql 2005 enterprise edition 64 bit.
I can't make work SQL Agent Job alerts and notifications.
I have setup Database mail - sent test mail successfully
I have created account for Outlook Express and tried to feed SQL agent Alert system with it. No use...
Can anybody help?
Natalia
View 3 Replies
View Related
Jul 23, 2005
Hi,I've been able to successfully configure SQL Server Agent to sendnotification emails to an appropriate Operator in the event of an alertbeing fired. This all works fine on one condition - that Outlook clientis running on the server.If Outlook is not running the alerts still be fired (i.e. the OccuranceRate still increases as and when expected), but the emails beinggenerated will not be sent until the next time Outlook is opened.Clearly it's unwise to rely on Outlook being open on the server at alltimes, so I was wondering if anyone knows of a workaround to ensurethese emails are processed immediately?I'm using SQL Server 2000 SP4 and Outlook 2003.thanks,Bob.
View 3 Replies
View Related
Jul 23, 2005
Assistance PleaseI have a couple of scheduled jobs that are failing to e-mailnotifications on completion (via SQL Agent Mail).I can send a Test e-mail without any problems. I can run the jobsmanually, and the e-mail notification works effectively.Left to run according to the schedule, and no e-mail notification isgenerated.Any assistance greatly appreciated.Thanks*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Aug 18, 2015
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies
View Related
Feb 2, 2007
I've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM
Log Database Mail (Database Mail Log)
Log ID 402
Process ID 3936
Last Modified 2/2/2007 8:35:00 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
What step am I missing?
View 1 Replies
View Related
Mar 24, 2006
Hi,
Wondering if anyone there can tell me what I'm doing wrong (and please be gentle as I'm not at all techy).
I have a DTS scheduled on the Server Agent to run, and at the end it is to send a mail to notify me and several others that it has completed. Trouble is, it runs but doesn't send the mail.
However if I execute the DTS manually it does send the mail.
I have a idea it might be to do with the Profile in SQL Mail in Server Settings on the Properties of the server, but have no idea how to correct this.
Can anybody help?
View 2 Replies
View Related
Oct 5, 2007
Here's the scoop, and I've seen several posts to this effect but none of the solutions have worked.
Enabled database mail. confirmed profiles and can send test database mail from Query Window. I can also right click Database mail and send test emails. Configured valid operator using same email address for the test emails above.
Enabled database mail profile under SQL Agent properties > Alert System.
From what I've seen, the test button is supposed to be greyed out, and it is. However alerts do not send emails operator.
I've done this
http://msdn2.microsoft.com/en-us/library/ms186358(SQL.90).aspx
and this
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=322173&SiteID=1
and have bounced the Agent after each change but still no mail from the Agent.
I've tried select * from sys_mail_event_log no errors.
For the life of me, I can't see why the Agent won't send mail.
Help.
View 5 Replies
View Related
Jul 9, 2001
I am using nt4.0 sp5 with sql7.0 sp3 and exchange client.
Does anyone know how to keep xp_sendamil form putting a copy of the mail message in the sent mail folder or an automated process for deleting all mail in the sent folder? As it stands now I must manually delete all messages from the sent mail folder on a daily basis.
Thanks,
Ed.
View 6 Replies
View Related
Mar 7, 2007
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
View 1 Replies
View Related
Dec 13, 2007
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
View 11 Replies
View Related
Jun 8, 2006
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
View 11 Replies
View Related
Apr 25, 2007
I have sql 2000 sp4 running on a cluster, we had to fail over to other cluster, and now the sql agent choice to use a mail profile is grayed out. I can go to sql mail and test the profile and it works, but I can't change it for the sql agent? Anyone seen this before
View 3 Replies
View Related
Jan 30, 2006
I've just installed and configured outlook 2003 with sql agent mail and I've come across a strange conundrum: messages from agent mail are not actually sent unless the outlook client is open, but the default mail folder is locked by agent when agent is started, thus preventing outlook 2003 from opening. If I try things the other way - opening the client and then configuring/restarting agent mail - then agent mail can't access the default mail folder because the client has it locked.
There doesn't seem to be any way to win here.
Anyone come across this issue and found a workaround?
View 4 Replies
View Related
Nov 9, 2006
Using SQL 2005, SSIS, I have an SSIS package which is scheduled as a SQL Server Agent job. The package contains a Send Mail task. This task fails when SQL Agent runs the package. The task succeeds when executed interactively from the package, logged on as the SQL Agent service account. The package as a whole succeeds when executed from "Start Debugging". An Execute SQL Task in the same package containing an sp_send_dbmail statement succeeds when SQL Agent runs the job, and the same sp_send_dbmail succeeds in Mgmt Studio query window. All these events all logged onto the server as the SQL Server/SQL Agent service account.
I would appreciate ideas on what else to check for here, so that I can use the Send Mail SSIS task in packages which are run by SQL Agent jobs.
Thanks, Holly
View 1 Replies
View Related
Feb 10, 2008
Hello,
The Database Mail feature is already enabled on the server, also I have a mail account on the other server.
The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ?
Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account?
The mail should be sent from my SQL Server.
Thank You.
View 3 Replies
View Related
Feb 20, 2008
Hi all....
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
Thanks
Rajesh
View 10 Replies
View Related
Feb 6, 2008
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
View 7 Replies
View Related
Sep 1, 2006
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
View 4 Replies
View Related
Nov 10, 2006
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
View 3 Replies
View Related
Feb 9, 2006
Hello, hoping someone might be able to help.
I've set up Database Mail on an instance of 2005 and the test mail works just fine. However, when testing a job (notify on fail, success, whatever) the mail fails to send. Job History last information reads NOTE: Failed to notify 'My Name' via email.
Checked out the Database Mail logs - nothing interesting.
Restarted the Agent service and then checked out the current Agent Log. Found message:
[260] Unable to start mail session (reason: No mail profile defined).
The 'DatabaseMailProfile' key is most certainly defined in the Registry
(at 'HKEY_LOCAL_MACHINE', N'SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1SQLServerAgent')
I'm at a loss...why is it telling me no mail profile defined?
I'd be most grateful for any help if anybody else has run across this problem.
Cheers,
Megan
View 2 Replies
View Related
Feb 22, 2004
Hi All,
Great forum y'all have going here.
Just wondering if anyone else has experienced this?
Enterprise Manager:
I have setup and 'sucessfully tested a MAPI session' with a mail profile via support services > sql mail. That works fine, however in sql server agent properties the mail session section on the first general tab appears to be greyed out.
scenario is:
Windows Server 2003 SBS edition
SQL Server 2000 SP3
Exchange Server 2003 is also running on the server, with Outlook 2003 client (so i suspect side chaining issue).
Any help appreciated! did not have any luck googling or using microsoft KB.
View 12 Replies
View Related
Jul 23, 2005
It's a Windows 2000 Server box with SQL 2000 on it. MSSQLSERVER &SQLSERVERAGENT services are logged in as valid domain user. I set up amail profile for that user, and can send email via Outlook 2003.However, when I go to the SQL Agent Properties in Enterprise Manager,Mail Profile is disabled.I've restarted the services & even tried rebooting the server. Thisworks on my other servers, but they're Windows 2003. Not sure ifthat's the problem though.Anybody have any clues?
View 1 Replies
View Related
May 5, 2006
Upgraded SQL Server 2005 x64 to Service Pack 1 expressly for the purpose of enabling Database Mail from SQL Job, which was a known bug that was listed as fixed in this Service Pack. It still does not work; in fact after installing SP1 on an x86 SQL Server Standard, Database Mail does not work from there now either, although it did prior to the upgrade! I am using Integrated Security.
Error message received: The job succeeded. The Job was invoked by User <name>. The last step to run was step 1 (Select). NOTE: Failed to notify 'Mike Schelstrate' via email.
Message in Error Log: [264] An attempt was made to send an email when no email session has been established.
Send test Email does work on both Servers.
Here is another Error message I found in the SQL Error Logs: [298] SQLServer Error: 2812, Could not find stored procedure 'msdb.dbo.xp_sqlagent_notify'. [SQLSTATE 42000] (DisableAgentXPs). Looks like this may be the root of the problem because it does not exist, I checked. How do I obtain this missing extended stored procedure?
View 9 Replies
View Related
Sep 12, 2002
i have to create a scheduled task that does the following:
a) creates an Excel Spreadsheet from a SQL Query
b) sends the spreadsheet to a user
i then need to schedule this task so that it runs every day and creates a NEW spreadsheet (doesnt matter it the name is the same as long as it overwrite what is already there)
HELP me PLEASE i dont like this SQL Game anymore !!
Daniel.:mad: :confused:
View 5 Replies
View Related
Sep 26, 2001
Hi, I have created a profile named sqlmail in exchange server. I tried to run the sql mail service from support service under sql mail to put the profile name, I got the following error: can any one assist me in setting up sql mail in an sql server 2000. .... thanks
Ali
Microsoft SQL - DMO(ODBC SQLState: 42000)
Error 18025:xp_test_mapi_profile: failed with mail error 0x80004005
View 1 Replies
View Related
Jul 29, 2013
NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 4 Replies
View Related
