I tried to send message through SQL mail. After sent, it said that the mail has been sent. But, when I open the Outlook 2003. The message was in Inbox with a error msg: "This message has not been sent". Is there anyone ever faced this problem before?
View 1 RepliesI'm running SQL Server 6.5 (SP5a) on an NT4 server (SP3). I am using the Outlook Express account for SQLExecutiveCmdExec
which has all the requisite permissions. SQL Executive as well as SQL Server services are logging in under this account.
The server seems to be functioning normally in every other way (there's no production data on it yet).
When attempting to start SQL Main, the following lines appear in the Errorlog
1999/06/09 16:15:16.62 ods Starting SQL Mail session...
1999/06/09 16:15:16.64 ods Error : 17951, Severity: 18, State: 1
1999/06/09 16:15:16.64 ods Failed to start SQL Mail session.
1999/06/09 16:15:16.64 ods OS Error : 126, The specified module could not be found.
MSKB Does not have any information on this error message. Can anyone provide some insight as to what's going on please?
P.S. I have another server running SQL Mail with the same configuration with no problem.
I have an After Update Trigger specified on a database table to notify specific users via email when certain customer values are modified. (This is a HACK / Workaround for functionality that doesn't exsist in the product.)
I had be using xp_sendmail without a problem. I recently upgraded the database server to SQL2005 and wanted to try sp_send_dbmail. (I was interested in the asynch and the non-MAPI nature of Database Mail.)
This is the new code:
EXEC @retval = msdb.dbo.sp_send_dbmail
@recipients = @rec,
@blind_copy_recipients = @bcc,
@subject = 'Important Customer Information Change',
@body = @body
This is the old code:
EXEC @retval = master.dbo.xp_sendmail
@recipients = @rec,
@blind_copy_recipients = @bcc,
@subject = 'Important Customer Information Change',
@message = @body
The problem now is that the application reports an update failure because the sp_send_dbmail return the message "Mail Queued."
I don't know if there's a way to suppress this message or not. Or some other way to indicate that "all is well" even though the stored procedure returned a message.
Thanks in advance.
I need to set a trigger so that an email is generated when a row is inserted into the ABC_DB_OnlineFormsConfirm table. The message will include data not only from that table, but from a related table called ABC_DB_OnlineForms. The common field between the two is FormID. This is related to an online account application process where the user has the option of completing it in one session, or saving it and coming back at a later time. Once the user has completed the first screen and clicks continue, a record is written to ABC_DB_OnlineForms. At the very end, when he clicks “Save and Complete”, a row is written to the ABC_DB_OnlineForms table. I would like the body of the email to include three separate lines, as follows. The first two pieces of data come from the OnlineForms table and the third from OnlineFormsConfirm. The field names are userid, IRSBackup and ConfirmationCode.
UserID:
Subject to IRS Backup Withholding?:
Confirmation Code:
What I have below results in an email body that contains the confirmation code all by itself. If I switch @body=@MessageBody to @body=@UserID or @body=@Backup, it will report the correct single piece of data, but I have no idea how to get all three pieces at once as separate lines including the leading descriptor (UserID:, Confirmation Code, etc.).
CREATE TRIGGER SendEmail
ON [ABC].[dbo].[ABC_DB_OnlineFormsConfirm]
AFTER INSERT
AS
Begin
Declare @MessageBody varchar(100)
[code]...
i have developed a pakage which populates a two different tables with reference to the xml files added to a folder which is watched by a security WMI task.it is governed by a sequence container which contains three for each loop container for working on the different files.i have different event handlers set up inside for each loop container tasks which contains , data flow task, execute sql task, and moving the processed file to the desired destination.i want to set up a send mail task on the package level using event handler on error, where i have set up a task for looging the error to the error table , i have tried to collect all the error messages in a array list variable . and trying to use that variable a s a message source. i could not under stand if i set the propogation variable in the sequence container as false than will the onpost execute event will fire the onpostexecute event handler in the package level.if show how can i send only one email for all the errors of package with error looging.
View 6 Replies View Related
while i was trying to execute the code for Sending an "HTML Mail Message with the Script Task" given at the link below http://msdn2.microsoft.com/en-us/library/ms403365.aspx
following error was encountered.
DTS Script Task has encountered an exception in user code:
Project namecriptTask_098956444e9f4ae195c3565569c9444b
The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there
at Microsoft.SqlServer.Dts.Runtime.Variables.get_Item(Object index)
at ScriptTask_098956444e9f4ae195c3565569c9444b.ScriptMain.Main() in dts://Scripts/ScriptTask_098956444e9f4ae195c3565569c9444b/ScriptMain:line 29
please help me
hi
I am trying something very simple but cannot see why it is failing.
I am trying to add a filename to the message source of a mail task from a variable.
I have Variable 1 User::CurrentFilePath, Scope = ForEachLoop, Data Type = String
and Variable 2 User::mailSource, Scope = ForEachLoop, Data Type = String
Variable 2 EvaluateAsExpression is set to True and the Expression for now is simply "Processing of File " + [User::CurrentFilePath] + "has Begun"
However when i enter this i get
The expression for variable "Test2" failed evaluation. There was an error in the expression.
In the Value and Value type boxes of the variable property.
Any advice greatly received
Regards
Scott
I set up the "Send Email Task" succesfully with "SMTP Connection to myExchangeSERVER" using "Windows Authentication"
However, as we all know - you can't have html format for the Send Mail Task. BUT this piece of code straight from MSDN doesnt work for me - each time it pops up this "Mail Sent Succesfully" - but I receive NO freaking EMAILs!!! Am I missing something or is it another one of those Microsoft "gotchas" ?
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports System.Net.Mail
Public Class ScriptMain
Public Sub Main()
Dim htmlMessageTo As String = "me.here@mydomain.com"
Dim htmlMessageFrom As String = "SSIS@mydomain.com"
Dim htmlMessageSubject As String = "SSIS Success - My Package"
Dim htmlMessageBody As String = _
Dts.Variables("User::HTMLtemplateText").Value.ToString
Dim smtpServer As String = "myExchangeSERVER"
SendMailMessage( _
htmlMessageTo, htmlMessageFrom, _
htmlMessageSubject, htmlMessageBody, _
True, smtpServer)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub SendMailMessage( _
ByVal SendTo As String, ByVal From As String, _
ByVal Subject As String, ByVal Body As String, _
ByVal IsBodyHtml As Boolean, ByVal Server As String)
Dim htmlMessage As MailMessage
Dim mySmtpClient As SmtpClient
htmlMessage = New MailMessage( SendTo, From, Subject, Body)
htmlMessage.IsBodyHtml = IsBodyHtml
mySmtpClient = New SmtpClient(Server)
Dim myCred As New System.Net.CredentialCache()
mySmtpClient.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials
mySmtpClient.Send(htmlMessage)
MsgBox("Mail sent")
End Sub
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies View RelatedI've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM
Log Database Mail (Database Mail Log)
Log ID 402
Process ID 3936
Last Modified 2/2/2007 8:35:00 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
What step am I missing?
I am using nt4.0 sp5 with sql7.0 sp3 and exchange client.
Does anyone know how to keep xp_sendamil form putting a copy of the mail message in the sent mail folder or an automated process for deleting all mail in the sent folder? As it stands now I must manually delete all messages from the sent mail folder on a daily basis.
Thanks,
Ed.
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
In my SQL Server, I see the below message in the Application Event Viewer
"18265 :
Log backed up: Database: HSD, creation date(time): 2007/01/06(05:05:05), first LSN: 1439:495055:1, last LSN: 1439:496675:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQLBACKUPHSDHSD_tlog_200707141300.TRN'})."
When I save the application event viewer and open it in another server, I do not see the above message, instead I get the following message:
" Can't find or load message DLL. Message DLL must be in path or in current directory."
Any thoughts to overcome this problem is appreciated.
Thanks
Santhosh
Hello,
The Database Mail feature is already enabled on the server, also I have a mail account on the other server.
The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ?
Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account?
The mail should be sent from my SQL Server.
Thank You.
Hi all....
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
Thanks
Rajesh
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?
i have to create a scheduled task that does the following:
a) creates an Excel Spreadsheet from a SQL Query
b) sends the spreadsheet to a user
i then need to schedule this task so that it runs every day and creates a NEW spreadsheet (doesnt matter it the name is the same as long as it overwrite what is already there)
HELP me PLEASE i dont like this SQL Game anymore !!
Daniel.:mad: :confused:
Hi, I have created a profile named sqlmail in exchange server. I tried to run the sql mail service from support service under sql mail to put the profile name, I got the following error: can any one assist me in setting up sql mail in an sql server 2000. .... thanks
Ali
Microsoft SQL - DMO(ODBC SQLState: 42000)
Error 18025:xp_test_mapi_profile: failed with mail error 0x80004005
NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 4 Replies View RelatedHi every body
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile.
I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is
"Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
please help me.
POUYAN
hello everybody.
I have server server1
sql server and agent and mail profiler
running using mydomainsvcsql
dts (test_dts)created by user domainalex
with "use windows athentication"
dts steps
1. exe sp_who2
2. send mail to joe
user domainjoe run
DTSRun /S server1 /E /N test_dts
with error
Error: -2147220352 (80040480); Provider Error: 0 (0) Error string: Logon failed: MapiLogonEx Failed due to MAPI error 273: MAPI Logon failed
what permisissions should be granted to
domainjoe
in order to run dts from DTSRun ?
Thank you
Hi.
I have problems with sending a mail from SQL Server:
SQL Mail starts.
Command: xp_sendmail 'MRudyk','Halo!'
returns:Unknown recipient: Parameter '@recipients', recipient 'Mrudyk'
'Mrudyk' is valid recipient...
NOT ABLE TO SEND TEST MAIL FROM DB MAIL///The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 3 Replies View RelatedI had a very recent problem where an excess number of mail records were queued. I ran sysmail_delete_mailitems_sp and deleted them from the InternalMailQueue, but it looks like they still exist in the ExternalMailQueue as I keep getting messages in the log similar to "Mail Id 2277459 has been deleted from sysmail_mailitems table. This mail will not be sent". The MailItem_Id keeps incrementing so it looks like it's working its way through. The problem is we can't use it to sent current mail until it gets through about another 3 million records.
If there is some way to delete those records from the External Mail Queue or fast-forward the system to the current records that would be very helpful. Any ideas?
John
Hello,
I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.
// Create an empty request message
string Msg = "Hello";
MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));
Message request = new Message("Request", body);
Thanks,
Scott Allison...
Hello Everyone,
I am trying to configure SQL MAIL and SQL SERVER AGENT MAIL feature of SQL SERVER 2000 with Lotus Domino server (Not Microsoft Exchange). Every thing goes fine and it works also. Problem starts when I try to restart SQL Agent Service. It hangs and the status of service remain 'starting'...
Also the size of the sqlagent service process goes upto 12MB. I don't understand why? Can any one help me in solving this problem.
I am using Windows 2000 Advanced Server and SQL Server 2000 with SP3. Domino client is R5.0.5 and Outlook 2000.
Dear MSSQL Collegues;
I set up SQL mail to send mail using MS Mail Server off of a separate server. The mail works and the server does mail out
with the difference that I must physically click on the "check mail" for MS Messenger to send the mail out to the mail server.
I thought about installing MS Exchange (The one I have running on NT workstation) but I can not find the installation kit
for Exchange anywhere. I tried Microsoft but I can not find it. Is there a trick to installing Exchange out of the cd rom for
NT 4.0? Or is there a setting in Messenger that I have to set for it to send mail by itself?
I need help Please.
Thank you for your help
David E. Pierri
Pseudo SQL Admin