SQL Mail Not Getting Configured
Nov 21, 2005
Hi
I just ran the following command & got the following result
Microsoft SQL Server 2000 - 8.00.760 (Intel X86)
Dec 17 2002 14:22:05
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Evaluation Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
Thus as per my knowledge is has Service Pack 4 , which is the latest.
Now i have even configured the Microsoft Outlook client & am able to send & recieve mails.
But then i try to configure the SQL Mail it says
Error 18030:xp_test_mapi_profile:Either there is no defaultmail client or the currrent mail client cannot fulfill the messagong request.
Please help.
View 3 Replies
ADVERTISEMENT
Jul 29, 2015
Send Mail task not working properly when it configured in Precedence Constraint (Failure)...
Scenario:
I'm using multiple containers in my ssis package. Also I have configured mail task for capturing error.
I'm getting mail only when error occurs in foreach loop container. If error occurs in other containers it doesn't works.
Actually I would like to receive mail notification on error when it occurs in any of the containers or DFT.
View 9 Replies
View Related
Oct 12, 2005
Recently I'm working on a MS SQL 2K server with a database installed that becomes larger and larger. Is there a simple rule or calculation how much memory I must have installed in the server configuration to get a normal performance.
I remembering somthing like the memory size must be equal to the size of the largest table or something. :confused:
View 2 Replies
View Related
Jul 13, 2007
Hi this is SQL 2000 but I couldn't see a forum for SQL 2000 replication.
I have set up merge replication. Between a server and an msde laptop.
The sync works fine within the network but when the user goes home and vpn's into the network and tries to replicate they get an error message that says:
"...server is not configured as a distributor" I find this strange because the replication definitely works within the network.
View 1 Replies
View Related
Jun 4, 2007
Ok i am very new to the word of mirroring in sql 2005, i am trying to get it to work, i have 3 servers
my witness server
mirror server and then of course the principal server, all are completely different servers.
I have a copy of the db on the princapal and the mirror server (excatly the same, snapshot)
right click on the princapal db and go to properties choose mirroring run through the' configure security' wiarzd
it resolves all my other DB server as it should. (using the same sql authentication also tried windows intergrated)
when i start the mirror i get unable to start
This database has not been configured for mirroring
what am i not doing???
how do i configure this damn thing?
thanks
Brad
View 2 Replies
View Related
Feb 6, 2004
I just had to rebuild master and msdb in Sql 2000. Now any DTS package accessing that machine fails with the message 'Server __ is not configured for DATA ACCESS.' The message seems to be coming from OLE. Everything else, including applications, scheduled jobs, etc. seems to work fine.
How can I restore data access?
View 5 Replies
View Related
Oct 26, 2007
Hi,
My OS is Windows Vista and I'm running SQL Server 2005 with SP2 and I have installed JDBC driver sqljdbc1.2 on my laptop.
I tried to connect it to the database Employee on Database Enginee Server
Here is the code:
import java.sql.*;
import com.microsoft.sqlserver.jdbc.*;
public class MSsqlConnect{
public static void main(String[] args) {
System.out.println("Microsoft SQL Server 2005 Connect Example.");
Connection conn = null;
String url ="jdbcqlserver://localhost:1433;integratedSecurity=true";
String dbName = "Employee";
String driver = "com.microsoft.sqlserver.jdbc.SQLServerDriver";
String userName = "Gurumurthy";
String password = "pa55word";
try {
Class.forName(driver).newInstance();
conn = DriverManager.getConnection(url);
System.out.println("Connected to the database");
conn.close();
System.out.println("Disconnected from database");
} catch (Exception e) {
e.printStackTrace();
}
}
}
When i run the program i got the msg:
C:UsersGurumurthyDesktop>java MSsqlConnect
Microsoft SQL Server 2005 Connect Example.
26 Oct, 2007 10:05:09 AM com.microsoft.sqlserver.jdbc.AuthenticationJNI <clinit>
WARNING: Failed to load the sqljdbc_auth.dll
com.microsoft.sqlserver.jdbc.SQLServerException: This driver is not configured for integra
ted authentication.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Sou
rce)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.access$000(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection$LogonCommand.doExecute(Unknown
Source)
at com.microsoft.sqlserver.jdbc.TDSCommand.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown S
ource)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at MSsqlConnect.main(MSsqlConnect.java:16)
Could anyone pls help me out to fix it.
thanks & regards,
Gurumurthy
View 1 Replies
View Related
Mar 26, 2007
Hi,
My sqljdbc.jar is located in the following directory
C:Program FilesMicrosoft SQL Server 2005 JDBC Driversqljdbc_1.1enu
And I copied x86 directory from C:Program FilesMicrosoft SQL Server 2005 JDBC Driversqljdbc_1.1enuauth
And used following steps to establish database connection
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
String connectionUrl = "jdbc:sqlserver://localhost:1433;IntegratedSecurity=true;";
Connection con = DriverManager.getConnection(connectionUrl);
and getting the following error
Mar 26, 2007 12:51:50 PM com.microsoft.sqlserver.jdbc.AuthenticationJNI <clinit>
WARNING: Failed to load the sqljdbc_auth.dll
com.microsoft.sqlserver.jdbc.SQLServerException: This driver is not configured for integrated authentication.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:193)
at testproject.JdbcDriverTest.main(JdbcDriverTest.java:60)
Please help me out in fixing this issue.
Thanks
Purnima
View 10 Replies
View Related
Jan 31, 2006
Hi,
I am using a Ado Connection Manager to connect to a M S Access source.
But when I use this connection Manager in Data Reader Source, I am Not able to Configure Data reader Source. It gives exception "Cannot Acquire Managed Connection From Run Time Connection Manager".
Can anyone help on this.
Thanks
Dharmbir
View 10 Replies
View Related
Jun 29, 2007
Hi!!
I created a report in SSRS which incorporates an image.And I have written a code using C# to export the report to PDF. While I am exporting this report to PDF from the SSRS, the resolution of the image got decreased.
Can anyone give me a solution to configure the resolution of the image in the PDF.
Thanks in advance.
View 6 Replies
View Related
Feb 12, 2008
Why does this error occur when restoring from a database file? There are some SQL Server 2005 database engines that will restore the file just fine using the exact same restore directory paths while others respond with the error message shown in the subject line. Here is more detail that is provided with the error:
Restore failed (Microsoft.SqlServer.smo)
System.Data.SqlClient.SqlError: The BackupDirectory registry key is not configured correctly. This key should specify the root path where the disk backup files are stored when full path names are not provided. This path is also used to locate restart checkpoint files for RESTORE. (Microsoft.SqlServer.Smo)
View 5 Replies
View Related
Aug 18, 2015
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies
View Related
Feb 2, 2007
I've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM
Log Database Mail (Database Mail Log)
Log ID 402
Process ID 3936
Last Modified 2/2/2007 8:35:00 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
What step am I missing?
View 1 Replies
View Related
Jul 9, 2001
I am using nt4.0 sp5 with sql7.0 sp3 and exchange client.
Does anyone know how to keep xp_sendamil form putting a copy of the mail message in the sent mail folder or an automated process for deleting all mail in the sent folder? As it stands now I must manually delete all messages from the sent mail folder on a daily basis.
Thanks,
Ed.
View 6 Replies
View Related
Mar 7, 2007
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
View 1 Replies
View Related
Dec 13, 2007
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
View 11 Replies
View Related
Jun 8, 2006
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
View 11 Replies
View Related
Apr 12, 2001
How do you solve this problem
replicated exceeds configured maximum 65536
View 1 Replies
View Related
Jul 27, 2001
Hi,
Environment:
I have a Sqlserver 6.5 production server used for web based applications
Compaq 5500 4 GIG RAM, 4 processor
Sql Memory config on that server is 1048576 (which is 2048 MB)
and the run value is 640000 (which is 1250 MB).
runvalue for user connections was 500
We have only 90 user connections may increase upto 100 depends on the connections. We don't have any overload on that server.
Error: I was seeing
"unable to connect maximum no. of 500 configured user connections are already connected" in the error log.
Action Taken:
I increased the user connections to 600
and rebooted the server. Immediately the same error I can see in the error log. But we have only 20 user connections at that time. I can able to connect.
Please advise me to get rid of this error.
Thanks,
Anu.
View 3 Replies
View Related
Dec 23, 2005
Good evening all,
I am new to Microsoft SQL and have been dumped right into the deep end with an anchor around my ankles.
The problem I am experiencing is about 6 months back a guy setup a Microsoft SQL server at my client. He then took his bags and left. Then a developer developed an application which uses a database on this sql server. Everything worked well for around 4 months.
Yesterday IBM Director notified me that I am running dangerously low on disk space on the server. By the time I came in to work this morning I had 12mb free disk space. The evil thing here is the transaction log for the downtime database. It has grown to over 60gb, all because the correct measures were not implemented to prevent this.
The problem that is occuring is no one can do anything on the database now due to the lack of free space. I have tried reading the sql books online but due to my lack of sql experience and knowledge I am stuck.
Can someone please help me? What I would like to do is pull my transaction log down to an acceptable size.
I was thinking of creating a new database and then importing all the data from the current database and then just deleting the current database however am slightly concerned that this may result in some data being lost.
Thanks in advance,
Richard
View 9 Replies
View Related
Jan 29, 2007
Hi all,
I created a simple file system task to copy a file from one location to another on my local system.
I used variables to specify the source and destination paths and now in my configuration file if I configure the values to something else also the package is taking the initial default values and not the values specified in the configuration file.
Can anyone throw some light on this.
Thanks in advance.
View 4 Replies
View Related
Feb 21, 2007
After upgrading to SP2 straight from from SP1, I get the message that my current reporting server instance cannot be configured for Sharepoint Integration when I click on the Sharepoint integration tab. Also, I do not get the option of choosing Sharepoint integration if I try to create a new database in the Database Setup tab. I've read that the new Reporting Services Configuration Manager is not compatible with an older instance of Reporting Services, and realize that might be the problem. But I haven't found how to get around it! Do I need to uninstall SSRS and start over? I'd really like to switch to Sharepoint integration, if at all possible.
Another funny thing: I thought I might try re-installing SP2 to rectify the above problem, and it sees that SSRS is the only thing that needs upgrading. When you continue, it says SSRS was successfully updated, but nothing's changed. If you re-run SP2, SSRS is chosen to be upgraded again! I've installed SP2 3 times now, and each time it says SSRS is needing upgrading.
Has anyone else seen this problem?
Thanks,
Matt
View 16 Replies
View Related
Jun 14, 2007
I have just installed SQL 2005 SP2 (Workgroup Edition)
I am receiving the below error when i open a datasource in report manager. The datasource uses ODBC.
The data processing extension used for this report is not available. It has either been uninstalled, or it is not configured correctly.
Also, when I go to create a new datasource only "Microsoft SQL Server" is available for connection types.
How do i resolve?
View 7 Replies
View Related
Feb 10, 2008
Hello,
The Database Mail feature is already enabled on the server, also I have a mail account on the other server.
The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ?
Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account?
The mail should be sent from my SQL Server.
Thank You.
View 3 Replies
View Related
Feb 20, 2008
Hi all....
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
Thanks
Rajesh
View 10 Replies
View Related
Feb 6, 2008
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
View 7 Replies
View Related
Sep 1, 2006
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
View 4 Replies
View Related
Nov 10, 2006
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
View 3 Replies
View Related
Apr 25, 2007
Hello All,
Does anybody know how to achive that?
<add name="ConnectionString" connectionString="Dsn=dsn_name;uid=user;pwd=password" providerName="System.Data.Odbc" />
I have got this created by the wizard for my sqlDataSource. I am able to get data from tables in the default database specified with the DSN.
But I want to go to other database than the default.
Thanks a lot in advamce for your help!
Kazu
View 3 Replies
View Related
Dec 15, 2014
how to check the errors when a database is configured in Always on in sql 2012?
View 1 Replies
View Related
May 1, 2015
SQL Server 2012: Out of all the databases in the instance we have a requirement in which we need to maintain a high availability for the databases around (128). Our team believed log shipping will apt for this requirement but not sure on it's limitations, how many databases are allowed or supports this log shipping from a single instance.
View 7 Replies
View Related
Feb 1, 2007
I am launching a package the following way:
DTEXEC.EXE /SQL "ProcessReportingDatabase" /SERVER RTG23SQLDB01 /REPORTING V /SET "Package.Variables[User::RunID].Value";35 /SET "Package.Connections[RSAnalytics].Properties[InitialCatalog]";"Fnd Prj 1 Dec29" /SET "Package.Connections[RSAnalytics].Properties[ServerName]";"RTG23SQLDB01UAT1PROD"
The problem does not happen with the [User::RunID] variable or the [Initial Catalog] property of my [RSAnalytics] connection object. But I am not successful in setting the [ServerName] property.
What happens when executed is that the package retains the ServerName property of the deployed package (Value="RTG23SQLDB01UAT1QA"), instead of what I pass in via DTEXEC???
Is ServerName read-only or something? I've tried configuring the package connection to RTG23SQLDB01UAT1PROD and creating a package configuration that I specify in place of the /SET - but to no avail as well!
This package has to work against 10 instances. I really don't want to have to create a separate package for each instance, and then a hack to figure out which one to call.
TIA - Dave
View 7 Replies
View Related
