SQL Mail On A MS Cluster
Sep 12, 2001Has anybody had any luck getting SQL Mail in SQL Server 2000 to work on a MS Cluster (2-node Active-Active cluster)? If so, can you please offer any suggestions.
Thanks
ADVERTISEMENT
SQL Mail On Cluster
May 8, 2000Can we set up mail on SQL server cluster?How do we do?
Thanks!
NT Cluster And SQL Mail
Dec 13, 1999I can't seem to get SQL Mail to work with NT Cluster Server. I have looked at everything I could find on SQL Mail, and everything I could find on NT Clustering, but no where have I found how to configure them to work together. I am just not seeing anything.
Would someone be so kind as to throw some hints, tips, or tricks my way?
Please forgive me if I missed something obvious.
Thanks in advance,
Neil Kessler
Managing Consultant
Emerging Technologies Practice
Interim Technology
Irvine, CA
SQL Mail In A Cluster Enviroment
Aug 7, 2000I have SQL Server 7.0 installed on a shared disk resource in a cluster group. I am wanting to use Outlook 98 ( 97 or 2000 will also be fine if it matters) for the mail profile. Do I install Outlook on the local server drive and reference that in SQL Mail or do I install Outlook on the shared resource drive and reference it there? Any suggestions would be greatly appreciated.
Thanks,
John Garmon
SQL Mail Setup Brought Down NT Cluster Server
Aug 15, 2000I tried installing SQL Mail but it didnt work.
What happened was, when I was entering the SQLMail profile for an Exchange User name. It took those values. Now when we ran/initialize SQLMail service, the Cluster Services kept rebooting/re-initializing all the services. Therefore, system crash and will not provide any services any longer.
We tried resolving it by running the SQL services in node 2 and we got MSSQLServer v6.5 service running but the SQLExecutive service
will not start.
I tried to reset the permissions on the services and have
that SQLExecutive run on the NT Administrator account.
After reading a few technotes from MS and applying them.
None seem to have worked so far. Here are some of the technotes:
Q195761
Q158585
Q155697
Q155283
(1) How can we fix the SQLExecutive so it will autostart with bringing down the cluster
(2) What can we do to successfully run SQL mail on the cluster server with this all the variables in this situation.
SQL Agent Mail Profile On Cluster Fail Over
Apr 25, 2007I have sql 2000 sp4 running on a cluster, we had to fail over to other cluster, and now the sql agent choice to use a mail profile is grayed out. I can go to sql mail and test the profile and it works, but I can't change it for the sql agent? Anyone seen this before
View 3 Replies View RelatedEnable Service Broker For DB Mail On SQL 2005 Cluster
Aug 31, 2006I'm having problems enabling service broker for DB Mail on a SQL 2005 cluster, when I try to execute this sql it just hangs. Any ideas?
USE master ;
GO
ALTER DATABASE AdventureWorks SET ENABLE_BROKER ;
GO
Setup And Upgrade :: Cluster Installation Failed On Adding Node To Cluster
Oct 10, 2015During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
Access Denied To Cluster Storage When Restoring 2005 Full Text DB To 2014 Cluster
Jun 10, 2015I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
Integration Services :: Sending Mail With HTML Format In Send Mail Task
Aug 18, 2015I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies View RelatedDB Mail And Notify Operator Through DB Mail Error Could Not Retrieve Item From The Queue
Feb 2, 2007I've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM
Log Database Mail (Database Mail Log)
Log ID 402
Process ID 3936
Last Modified 2/2/2007 8:35:00 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
What step am I missing?
SQL 2012 :: Advanced Cluster Preparation For New Instance On Existing Cluster
Apr 10, 2014I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
Setup And Upgrade :: Can Build Cluster By Adding Cluster Service
Jul 6, 2015Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedXP_sendmail Puts Copy Of Mail In Sent Mail Of Exchange Client.
Jul 9, 2001I am using nt4.0 sp5 with sql7.0 sp3 and exchange client.
Does anyone know how to keep xp_sendamil form putting a copy of the mail message in the sent mail folder or an automated process for deleting all mail in the sent folder? As it stands now I must manually delete all messages from the sent mail folder on a daily basis.
Thanks,
Ed.
SMTP Database Mail Showing Error While Sending Mail
Mar 7, 2007Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
SSIS Send Mail Task - Failure Sending Mail
Dec 13, 2007Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
SSIS Send Mail Task - Failure Sending Mail
Jun 8, 2006Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
SQL 2012 :: Server Cluster Without Windows Failover Cluster
Feb 18, 2014I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies View RelatedT-SQL (SS2K8) :: Convert Non-cluster Primary Key To Cluster Unique
Nov 6, 2014I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
Recovery :: Can Join A Node In Windows Cluster Which Is Already In Different Cluster
Oct 8, 2015can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
Recovery :: IP Change For Cluster / Nodes And Windows Cluster?
Jul 15, 2015We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
Configure SMTP Server Mail To Send Mail
Feb 10, 2008Hello,
The Database Mail feature is already enabled on the server, also I have a mail account on the other server.
The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ?
Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account?
The mail should be sent from my SQL Server.
Thank You.
Database Mail With Yahoo Business Mail Server
Feb 20, 2008Hi all....
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
Thanks
Rajesh
Error Sending Mail With Send Mail Task
Feb 6, 2008I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
Help With Mail That Send Mail When Database Bakcup Fails
Sep 1, 2006Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
Sending Mail To Several Users With Send Mail Task ?
Nov 10, 2006I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
Script To Change Cluster Index To Non Cluster
May 20, 2003Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
Transact SQL :: Difference Between Cluster And Non-cluster Index
Jul 26, 2015Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
DB Engine :: Why Cluster And Non-cluster Indexed Created On Same Key
Jun 10, 2015CREATE TABLE [dbo].[Access](
[AdminID] [int] NOT NULL,
[FnID] [int] NOT NULL,
CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
How Do I Mail Results From A Query To A Mail Recipient
Sep 12, 2002i have to create a scheduled task that does the following:
a) creates an Excel Spreadsheet from a SQL Query
b) sends the spreadsheet to a user
i then need to schedule this task so that it runs every day and creates a NEW spreadsheet (doesnt matter it the name is the same as long as it overwrite what is already there)
HELP me PLEASE i dont like this SQL Game anymore !!
Daniel.:mad: :confused:
Sql Mail Failed., Need Help To Set Up Sql Mail In Sql Server 2000
Sep 26, 2001Hi, I have created a profile named sqlmail in exchange server. I tried to run the sql mail service from support service under sql mail to put the profile name, I got the following error: can any one assist me in setting up sql mail in an sql server 2000. .... thanks
Ali
Microsoft SQL - DMO(ODBC SQLState: 42000)
Error 18025:xp_test_mapi_profile: failed with mail error 0x80004005
Unable To Send Test Mail From DB Mail
Jul 29, 2013NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 4 Replies View RelatedProblem With Sending Mail Via Database Mail
Mar 9, 2007Hi every body
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile.
I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is
"Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
please help me.
POUYAN