SQL Mail Setup Error..Any Help?
May 25, 2000
Any help on the following error which I am getting when I am trying to set up SQL Mail for Internet Mail with Outlook Express?
Error 22030: A Mapi error(error no 271)occured.Unable to get the default MAPI Message store due to mapi error 271:One or more of the receipients was not found in the address book.
We have Lotus Notes,but not interested in hooking up to it.As we need to have only outgoing mail facility to outside parties through internet,please advice how to connect using SMTP server and outlook express.
Thanks!
View 1 Replies
ADVERTISEMENT
Mar 16, 2007
I have a third part mail server program. Can the third party software be used in setting this up? I have the book infront of me, but can not find any MAPI-compliant mail client that can connect where ever it needs. What do I need, and what steps do I need to make this work?
Thank you,
Ernie
View 3 Replies
View Related
Sep 28, 2005
Hi,I just wanted configure this, so the SQL server will be able send messages tomy mail address (or any other). Though my mail server exists in a Unixmachine, I have configured MS Outlook to pick mails from there, and testedthat it sends/recives.My env. is Win XP, with SQL 2000, BUT does not have Exchange server.What does it really need if the SQL server has to send mails to users (now ,to my mail id)? This is what I understood.1. COnfigure SQL Mail. This needs profile, and this profile must be availablein MS Outlook and able to send/receive mails2. Configure Start -> Control Panel ->Mail ???3. Any?Thank youPhilipus--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200509/1
View 1 Replies
View Related
May 25, 2001
I'm running sqlserver 2000 EE on windows nt 4.0 server. We are using
Microsoft outlook express. I would like to setup our sqlserver to
notify me via e-mail when a job finishes.
1) What value should I have for mail profile. Under
sql server age properties.
Please let me know.
Thanks,
Ranjan
View 1 Replies
View Related
Aug 15, 2000
I tried installing SQL Mail but it didnt work.
What happened was, when I was entering the SQLMail profile for an Exchange User name. It took those values. Now when we ran/initialize SQLMail service, the Cluster Services kept rebooting/re-initializing all the services. Therefore, system crash and will not provide any services any longer.
We tried resolving it by running the SQL services in node 2 and we got MSSQLServer v6.5 service running but the SQLExecutive service
will not start.
I tried to reset the permissions on the services and have
that SQLExecutive run on the NT Administrator account.
After reading a few technotes from MS and applying them.
None seem to have worked so far. Here are some of the technotes:
Q195761
Q158585
Q155697
Q155283
(1) How can we fix the SQLExecutive so it will autostart with bringing down the cluster
(2) What can we do to successfully run SQL mail on the cluster server with this all the variables in this situation.
View 1 Replies
View Related
May 6, 2005
Wondering if there is a different way to setup mail because of Windows Server 2003 instead of Windows Server 2000? The server I'm being asked to get mail working on will have an exchange email account and I'm not familiar with setting this up. On my 2000 machine I had to use Outlook 2000 with option for Corporate or Workgroup an a POP email account. Any help is appreciated.
View 2 Replies
View Related
Feb 22, 2006
hello,
I would like to send mail from sql server using CDONTS.
I have the sql code for this and it works for internal addresses.
I get an error/warning saying that it cannot relay for external addresses when I try an outside domain.
Is there settings in IIS for the SMTP service that I can change to allow it to relay to the external domains?
I have everything running on the SQL Server, and I do not have access to the exchange server.
Thanks
View 1 Replies
View Related
Feb 2, 2007
I've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM
Log Database Mail (Database Mail Log)
Log ID 402
Process ID 3936
Last Modified 2/2/2007 8:35:00 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
What step am I missing?
View 1 Replies
View Related
Mar 7, 2007
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
View 1 Replies
View Related
Jan 5, 2006
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
View 12 Replies
View Related
Feb 6, 2008
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
View 7 Replies
View Related
Nov 15, 2015
I'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
View 2 Replies
View Related
Nov 16, 2007
Hello,
On the development server, I am trying to work with subscriptions . Report Server is windows authenticated.
When no paramters exist for the report, the sucbscription is successful.
But if there are paramters for the report, email delivery fails.
These are not data driven subscriptions.
Did anyone face the same problem ? Can anyone tell me where to start debugging since logfiles just say failure to send the email.
Thanks,
SqlNew
View 2 Replies
View Related
Apr 24, 2007
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 138
----------------------------------------------------------
Failed to read property "InstallIds" {"MachineConfiguration", "", "DUTTONDARRYL1"} from cache
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection:etProperty
Source Line Number: 164
----------------------------------------------------------
Unable to write property into cache: IsClustered
Source File Name: datastoredatastorecacheschema.cpp
Compiler Timestamp: Wed Jun 14 16:28:00 2006
Function Name: DataStoreCacheSchema::writeProperty
Source Line Number: 115
----------------------------------------------------------
Unable
04/24/2007 14:46:48.694 MSP returned 1603: A fatal error occurred during installation.
04/24/2007 14:46:48.790 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
04/24/2007 14:46:48.790 Registry: Cannot read registry key value "Debug"
04/24/2007 14:46:48.806 Copy Engine: Error, unable to install MSP file: c:f01fc31fd0988e3807HotFixSQLFilessqlrun_sql.msp
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
******************************************************
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729
MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp
MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32
MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist
MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603
MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object.
MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending.
=== Logging stopped: 4/24/2007 14:46:48 ===
MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/24/2007 14:46:48 ===
*************************************************************
The Summary.txt looks like this
Time: 04/24/2007 14:46:48.854
KB Number: KB921896
Machine: DUTTONDARRYL1
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Failed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER
Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER
Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER
SQL Server Native Client ENU 9.00.2047.00 x86
Client Components ENU SP1 9.1.2047 x86 DEVELOPER
MSXML 6.0 Parser ENU 6.00.3890.0 x86
SQLXML4 ENU 9.00.2047.00 x86
Backward Compatibility ENU 8.05.1704 x86
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : In Progress
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29527
View 8 Replies
View Related
Nov 16, 2006
I have create a SSIS package, for data export import process, but if my task get failed then i have to send a mail with proper error description as the SSIS generate in output window.
Can any one sugget me to, how can i store that error desciption in my variable.?
Thanks in advance.
View 5 Replies
View Related
Mar 12, 2001
I'm trying to get sql mail up and running. I am able to get the service started. But when I go under SQL Mail/Properties and test the profile that I created it comes back with the following error. Error 22030 a MAPI error(error 273) occurred. Unable to get the default MAPI Message store due to MAPI error. the information store could not be opened. I am running sql server 7.0. I have set up a profile under the exchange. If I bring up outlook on the server I can send and receive messages. I have the both the mssqlserver and the sqlserveragent running under the same account. If I go under operators and do a test on one of the operators I get the following message. The sqlmail session is not running but I sit it running under enterprise manager. We are using the outlook. Any ideas would be greatly appreciated. Thanks
View 4 Replies
View Related
Sep 7, 1999
I've just set up SQL Mail, and I think it's working -- at any rate, the envelope icon in Enterprise Manager
is green. Problem is, no matter what address I try to mail to, I get an 'Unknown recipient' error.
My input:
xp_sendmail 'srenaker@alexa.com', 'This is a test message.'
The results:
Msg 17914, Level 18, State 1
Unknown recipient: Parameter '@recipients', recipient 'srenaker@alexa.com'
Thanks in advance for any help,
Steve Renaker
srenaker@alexa.com
View 2 Replies
View Related
May 9, 2001
Hi everyone,
I am very new to this and am having a problem with SQL mail. I want to be able to send view or query results via email. I have set up SQL mail and tested it and it works fine for sending notification messages to me. When I go to a query analyzer and issue the xp_sendmail 'jyoungbar@shorehealth.org','this is a test message'
I always get the error that follows:
Server: Msg 18025, Level 16, State 1, Line 0
xp_sendmail: failed with mail error 0x8004011d
I am probably missing something very minor here. Can anyone help me??
Thanks,
Jason
View 1 Replies
View Related
Oct 28, 2005
hello everyone,it's first time for me to write here and also to use SQL.While i was installing SQl 2000 i got Setup Message said:" Microsoft SQL Server 2000 Enterprise Edition server component is not supported on this operating system. Only client component will be available for installation."Hope to know what's wrong, and please guide me.Thanks alot
View 6 Replies
View Related
Jan 15, 2007
i just installed and configured sql server 2005 reporting services
i have the reporting services install part on a separate server than my database server
when i try and go to the Reports URL, i get this error:
Invalid URI: The format of the URI could not be determined.
View 1 Replies
View Related
Jan 6, 2008
Hello, I am new to SQL but i have all the perfect tutorials and other things i need, but im having trouble actually getting it to install on my computer, i have the correct version, that i need for the tutorial provided, i get into the installation, and just as it finishes the installation of SQL sever 2005, a box comes up saying Hotfix.exe had an unexpected porblem and needs to close, i ignore it and carry on with the installation, it says things installed, SQL Server 2005 next to it says failure, i have been searching the net for 2 days now trying to find an answer, and still havnt got one, i need to finish my project by tuesday i need serious help.
Thank You All For Your Much Needed Help.
Krullex
View 1 Replies
View Related
May 3, 2006
Hi:
I have problem installing SQL Server 2005 on a SQL 2000 box. I am not doing a upgrade but installing SQL 2005 as another instance. Here is the error I see in the
In my core log I see the following error message
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 1603
Aborting queue processing as nested installer has completed
Message pump returning: 1603
In my core (local log) I see
---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::postCommit
sqls::HighlyAvailablePackage::preInstall
led due to cancel code received from cancel source: 29539
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MEHER_.NET Framework 2.0.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0004.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MEHER_.NET Framework 2.0 LangPack.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0004.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MEHER_.NET Framework Upgrade Advisor.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0004.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MEHER_.NET Framework Upgrade Advisor LangPack.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0004.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MEHER_.NET Framework Windows Installer.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0004.cab" Error Code : 2
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_MEHER_.NET Framework Windows Installer LangPack.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0004.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2006/3/28 21:4:5
Message pump returning: 1603
Any ideas as to why this happens and why it is failing. Any possible resolutions?.
Thanks
View 4 Replies
View Related
Jun 12, 2008
hi friends.... i had a problem with sending mail using trigger when Update data from a table. Procedure is executed successfully. but when i update record from a particular table. I had a following error xp_sendmail: Either there is no default mail client or the current mail
client cannot fulfill the messaging request. Please run Microsoft Outlook
and set it as the default mail client. (0 row(s) affected)
Can any one explain what's my problem and give me a solution for this.
it's Urgent !!!!!!!
View 1 Replies
View Related
Mar 13, 2001
Hi,
I recently installed MS SQL server version 7.00.623 on a Win2k server. I installed Outlook 2000 and had the Exchange Administrator create a mailbox in order to use SQL Mail and SQL Server Agent alerts when jobs fail. The Outlook mailbox was set up with a different name then the SQL Server Agent so I created a new account for the SQL Server Agent to match the name of the mailbox. I can send and receive mail from Outlook when logged into the server but I receive the following error when testing the profile in SQL Mail and SQL Server Agent properties:
"[260] Unable to start mail session (reason: Unable to logon (reason: Unable to get the default MAPI Message Store due to MAPI error 273: The information store could not be opened); check the mail profile and/or the SQLServerAgent service startup account)"
The SQL Server Agent account is a NT User type, uses NT Authentication and has sysadmin server privledges and I am attempting to configure the mail while logging in to the server via Terminal Services Client using this account. I have tried to stop and restart the SQL Server Agent services but still receive the same error. When I log into Outlook, I receive a dialog box titled "Enter Password" that asks for a user name, domain name and password. The Exchange Admin. set this up so I have to use my user name, domain and password.
Do I need to install a service pack for SQL Server?
Did changing the SQL Server Agent account cause this to fail?
Does anyone have any insight on why I cannot get SQL Mail configured?
Thank You So Much
View 2 Replies
View Related
Jun 16, 2006
have new sql 2005 install. I thought I setup the mail correctly. I setup an operator and could send test email to operator. I then setup a job to send email to the operator when job completes. Got the error below
Date 6/16/2006 8:45:57 AM
Log SQL Agent (Current - 6/16/2006 8:45:00 AM)
Message
[264] An attempt was made to send an email when no email session has been established
ANy help or links to setting up email on sql 2005
View 1 Replies
View Related
Sep 13, 2007
Ive created an Account and a Profile using Configure Database Mail Wizard.
Ive tried to send an email using this account, but I get this error
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-09-13T17:05:09). Exception Message: Cannot send mails to mail server. (Server does not support secure connections.). )
Can anyone help?
Regards
Steve
Steve Fouracre
View 2 Replies
View Related
Jun 27, 2006
SQL DBA new to ASP.Net. Looks like an error connecting to db but the code specified doesn't seem to coorelate to a inability to connect to datasource. In any event... how can I correct this?
Server Error in '/WroxUnited' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
Line 109: public virtual string Theme {
Line 110: get {
Line 111: return ((string)(this.GetPropertyValue("Theme")));
Line 112: }
Line 113: set {Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswroxunited4fb48694fe94e99App_Code.soddeqar.7.cs Line: 111 Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734931
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +766
System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428
System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +410
System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117
System.Configuration.SettingsBase.get_Item(String propertyName) +89
System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36
System.Web.Profile.ProfileBase.get_Item(String propertyName) +68
System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4
ProfileCommon.get_Theme() in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswroxunited4fb48694fe94e99App_Code.soddeqar.7.cs:111
Wrox.Web.GlobalEvents.ThemeModule.app_PreRequestHandlerExecute(Object Sender, EventArgs E) in c:WebsitesWroxUnitedWroxUnitedapp_CodeThemeModule.cs:20
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
View 1 Replies
View Related
Jun 29, 2004
When I tried to configure replication, the following error comes out.
What is that about and any idea?
View 1 Replies
View Related
Feb 4, 2004
I am trying to setup replication on my server, but was getting an error that said:
"The Distributor is not available Error 6. Specified SQL Server not found"
So, I did some searching and found a couple things to check and found
sp_helpserver....the server with id of 0 was a remote server, not the local server instance...and
select @@servername also returned the name of that remote server!!
I'm assuming this is my problem, but how did it get this way and how do I fix it?
Thanks
View 4 Replies
View Related
May 11, 2006
Using the following syntax, sometimes non-zero error codes are returned:
D:SQL Server x86Servers>start /wait setup
D:SQL Server x86Servers>echo %errorlevel%
3010
Searching BOL for 3010 returns nothing.
Other error codes that were seen are 1603 and 9009.
What do these error codes mean? Is there a place where they can be looked up?
View 4 Replies
View Related
Dec 11, 2007
The setup is on a Win 2003 attempting to install SQL 2005 standard edition using an Active Directory account part of the domain admin group (for the purposes of the install only). All the other components are installing properly, but then it tries to modify the SA account...
Here is the error description in my logs:
Machine : XXXXXXXX
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_XXXXXXXXXXXXX_SQL.log
Last Action : InstallFinalize
Error String : SQL Server Setup failed to execute a command for server configuration. The error was {Microsoft}{SQL Native Client}{SQL Server}Cannot alter the login 'sa', because it does not exist or you do not have permission.. Refer to the server error logs and Setup logs for detailed error information.
Error Number : 29521
Any help would be appreciated
View 3 Replies
View Related
Nov 7, 2000
I set up e-mail on my SQL server (7.0) via SMTP.
I installed Outlook '97. Typical Installation.
Everything was working fine, for couple of days,
then I got Dr. Watson messages, about MAPI.
Dr.Watson
The application, exemapisp32.dbg, generated an application error The error occurred on 11/ 7/2000 @ 11:35:48.437 The exception generated was c0000005 at address 6e4f2630 (<nosymbols>)
Then SQL will give me this message:
Unable to read local eventlog (reason: The data area passed to a system call is too small).
Anyway, try to reinstall Outlook '97, but the problem continues.
Any help, will be greatly appreciated.
View 1 Replies
View Related
May 24, 2000
Any help on the following error which I am getting when I am trying to set up SQL Mail for Internet Mail with Outlook Express?
Error 22030: A Mapi error(error no 271)occured.Unable to get the default MAPI Message store due to mapi error 271:One or more of the receipients was not found in the address book.
Thanks!
View 3 Replies
View Related
