I use sp_processmail in sql 6.5 to process incoming email queries against my DB. When I try the exact same thing in SQL 7 I get the following error message:
Server: Msg 18007, Level 16, State 1, Line 0
Supplied datatype for @set_user is not allowed, expecting 'varchar'
I have tried the following with no success:
sp_processmail @set_user='sa'
sp_processmail @set_user="sa"
sp_processmail @set_user=sa
Any Ideas???
I have two different SQL server installations (7 and 2000) that I have configured for using the SP_processmail procedure. Both servers can properly execute xp_startmail, xp_stopmail, xp_readmail, and xp_findnextmsg. HOWEVER, both have different problems with SP_processmail.
Using this command (and a host of many other variations):
sp_processmail @filetype = 'CSV', @separator = ',', @dbuse = 'ryantest', @set_user = 'guest'
SQL 7.0 says: Server: Msg 18007, Level 16, State 1, Line 0
Supplied datatype for @set_user is not allowed, expecting 'varchar'
I have tried every variation possible, including not specifying the yser which should result in it defaulting to the "guest" account. The message is always the same.
SQL 2000 says: Server: Msg 18025, Level 16, State 1, Line 0
xp_sendmail: failed with mail error 0x80004005
Queries processed: 0.
I have checked all my configurations and read every KB article - I can't find anything wrong.
Can someone PLEASE respond if you have any experience with SP_PROCESSMAIL on your servers.
Thanks in advance.
Ryan Hunt
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies View RelatedI've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM
Log Database Mail (Database Mail Log)
Log ID 402
Process ID 3936
Last Modified 2/2/2007 8:35:00 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
What step am I missing?
I am using nt4.0 sp5 with sql7.0 sp3 and exchange client.
Does anyone know how to keep xp_sendamil form putting a copy of the mail message in the sent mail folder or an automated process for deleting all mail in the sent folder? As it stands now I must manually delete all messages from the sent mail folder on a daily basis.
Thanks,
Ed.
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
Hello,
The Database Mail feature is already enabled on the server, also I have a mail account on the other server.
The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ?
Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account?
The mail should be sent from my SQL Server.
Thank You.
Hi all....
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
Thanks
Rajesh
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
i have to create a scheduled task that does the following:
a) creates an Excel Spreadsheet from a SQL Query
b) sends the spreadsheet to a user
i then need to schedule this task so that it runs every day and creates a NEW spreadsheet (doesnt matter it the name is the same as long as it overwrite what is already there)
HELP me PLEASE i dont like this SQL Game anymore !!
Daniel.:mad: :confused:
Hi, I have created a profile named sqlmail in exchange server. I tried to run the sql mail service from support service under sql mail to put the profile name, I got the following error: can any one assist me in setting up sql mail in an sql server 2000. .... thanks
Ali
Microsoft SQL - DMO(ODBC SQLState: 42000)
Error 18025:xp_test_mapi_profile: failed with mail error 0x80004005
NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 4 Replies View RelatedHi every body
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile.
I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is
"Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
please help me.
POUYAN
hello everybody.
I have server server1
sql server and agent and mail profiler
running using mydomainsvcsql
dts (test_dts)created by user domainalex
with "use windows athentication"
dts steps
1. exe sp_who2
2. send mail to joe
user domainjoe run
DTSRun /S server1 /E /N test_dts
with error
Error: -2147220352 (80040480); Provider Error: 0 (0) Error string: Logon failed: MapiLogonEx Failed due to MAPI error 273: MAPI Logon failed
what permisissions should be granted to
domainjoe
in order to run dts from DTSRun ?
Thank you
Hi.
I have problems with sending a mail from SQL Server:
SQL Mail starts.
Command: xp_sendmail 'MRudyk','Halo!'
returns:Unknown recipient: Parameter '@recipients', recipient 'Mrudyk'
'Mrudyk' is valid recipient...
NOT ABLE TO SEND TEST MAIL FROM DB MAIL///The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 3 Replies View RelatedI had a very recent problem where an excess number of mail records were queued. I ran sysmail_delete_mailitems_sp and deleted them from the InternalMailQueue, but it looks like they still exist in the ExternalMailQueue as I keep getting messages in the log similar to "Mail Id 2277459 has been deleted from sysmail_mailitems table. This mail will not be sent". The MailItem_Id keeps incrementing so it looks like it's working its way through. The problem is we can't use it to sent current mail until it gets through about another 3 million records.
If there is some way to delete those records from the External Mail Queue or fast-forward the system to the current records that would be very helpful. Any ideas?
John
Hello Everyone,
I am trying to configure SQL MAIL and SQL SERVER AGENT MAIL feature of SQL SERVER 2000 with Lotus Domino server (Not Microsoft Exchange). Every thing goes fine and it works also. Problem starts when I try to restart SQL Agent Service. It hangs and the status of service remain 'starting'...
Also the size of the sqlagent service process goes upto 12MB. I don't understand why? Can any one help me in solving this problem.
I am using Windows 2000 Advanced Server and SQL Server 2000 with SP3. Domino client is R5.0.5 and Outlook 2000.
Dear MSSQL Collegues;
I set up SQL mail to send mail using MS Mail Server off of a separate server. The mail works and the server does mail out
with the difference that I must physically click on the "check mail" for MS Messenger to send the mail out to the mail server.
I thought about installing MS Exchange (The one I have running on NT workstation) but I can not find the installation kit
for Exchange anywhere. I tried Microsoft but I can not find it. Is there a trick to installing Exchange out of the cd rom for
NT 4.0? Or is there a setting in Messenger that I have to set for it to send mail by itself?
I need help Please.
Thank you for your help
David E. Pierri
Pseudo SQL Admin
Does anyone know how to send email alert from SQL?
Thanks in advance.
Hi,
Can anyone please tell me the difference between Database Mail and SQL Mail.
Thanks in Advance
R.K.Nair
RKNAIR
I have been reading everything i can find regarding sql mail and sqlagent mail.We have a win2k server, sql 2000 and NO, NO, NO exchange server(all upto date on service packs).I have tried repeatadly for days to make this work, and have had noluck so far.1. I have a valid profile that tests fine in sql agent and via sqlmail test buttons.2. I have logged in to the box under that new domain account toinstall outlook and configure all the remaining options.3. I have set both the mssqlserver service and the sqlserveragentservice to run under the domain account that coincides with our pop3email server, and restarted both of them.4. I have installed outlook 2002, and I can send and receive emailsjust fine from our sql server.5. As soon as I try to test an email from within a job, the testfails.All I wanted to do was just be notified if a job fails. The amount oftime lost on what should have been a 30 minute project isunbelievable!!!If anyone has some suggestions, other than the obvious, please let meknow.Thanks,Dave
View 3 Replies View RelatedI have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil
To: sanderss@arsocdev.bdev.lab.mil
MessageSourceType: Direct Input
Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
Thanks
Hello All,
Hopefully someone out there will have an idea as this isdriving me nuts
I have some sample problem.I want to send many email in one send mail task, how can i do it?
what is a signal for separate between email address in send mail task.
please tell me for this event.
any suggesstion appreciated
Thanks you very much.
P.Chonnathan
To have SQL mail ability, do I need to load microsoft outlook on SQL server ?
What are the straight - forward step for SQL mail set-up ?
Thanks a lot in advance.
Ivan
I have an SQL 7 Server. I login into the computer with and account that I will call GOD. I start the Sql Server service with an account that I will call SqlServerGod. By doing this I can't get Sql mail to work, but when I log into the computer as SqlServerGod I am able to start Sql mail. I know why this is happening but I am wondering if there is a way around it. I know that I should be logging into the computer with the same account that I am starting Sql Server. The problem is that I can't and I don't want to start the services with the god account. Is there a way around this.
Thanks in advance
Troy
i have sql server 2000 also i install microsoft outlook 2000 ..
i create a profile from control panel >mail then
i start enterprise manager and go s
Support Services Right-click SQL Mail
no profiles are listed in the Profile Name drop-down list.
i write it manually then i get this error message
Error 18025 : xp_test_mapi_profile failed with mail error 0x80040106
how i can solve this
Some body please provide information regarding SQL Mail..what is it?? how can one use it?? Please gimme some details...
Thank you.,
Hi,
I have some triggers that send mails out to our customers. However I would like to put delivery receipts on them. Setting this up on the outlook client does not work so I am presuming that it is a variable you would use in T-SQL.
Does anyone know how to do this??
Thanks