Can someone tell me if this sounds OK?:
NT4 SP5 running SQL6.5
Physical Memory - 512mb
Virtual Memory - 1024mb
Allocated to SQL - 256mb
The largest database is 7gb and tempdb (in ram) is 150mb
Do as a rough guide these figures seem OK?
hi, here is the situation, my system has the following specks
hard drive = 45GB
memory = 1152 mb
Opsystem = win NT 4.0
application on the NT is ftp server and SQL server 6.5
I am having a tough time retrieving a simple query from a 11 million records.some of the feed back from the newsgroup is that I do not have enought memory. Is there a formula to use to figure out how much memory should allocate to the sql server? what if I allocated too much memory, does that affect the sql performance in a negative way?
Please help......
I can be reach at a.alhussein@mci.com
thanks alot
regards
Ali
I am looking for recommandations regarding the memory distribution for SQL 2000 server. In the memory tab of the server properties you can define use a fixed memory size or dynamically configure SQL server or even reserve physical memory for SQL server.
Are there any hints available or must it be handled according trial and error?
Thanks for any info
mipo
hi
I want to ask the method to calculate the memory in the configuration in SQL6.5.
If I have 256MB memory installed in the server, how many memory needed in the configuration of SQL6.5.
Hello,
So we have a clustered environment on Windows 2003.
We have 12GB ram, and are running with /3GB and /PAE.
We do not currently have AWE enabled.
SQL is currently using 2.799GB
This leaves only 200MB or so free for my COM+ component, and if/when it raises to that level, application users get 'Out of Memory' error.
How can we get these two products to share memory better, and more importantly utilize more of the free memory on the system.
Should we have AWE enabled? Are there any negatives to this? If AWE is enabled and SQL Uses say 6GB, Will the COM+ application have 0 available?
We are just finishing our migration to SQL 2012. In our old environment, the instance which held our SharePoint databases also served other applications. We did not experience any performance related issues in the past due to this.
SharePoint basically requires MAXDOP to be 1, which is correct on the old server. Since this configuration may not be ideal for other applications that may be put within our environment, we our entertaining the idea of isolating SharePoint into its own instance, probably on the same box.
My manager wants me to come up with performance trace data to better prove that we need to go this route since we apparently have had issues in the past by blindly following Microsoft's best practices.
1.MAXDOP configuration - I understand this may be a 2 pronged approach that would require looking at various execution plans and CPU related counters in Perfmon. SharePoint likely requires a maxdop of 1 due to the nature of the application (lots of concurrent processes). What is the best way to show this need graphically?
2. Memory configuration for multiple instances - Does the Total Server Memory reveal all the memory that a given SQL instance is utilizing? Should I use this counter to identify appropriate min/max memory configurations for multiple instances on a single cluster?
The problem with the perfmon approach is that it's scope is limited to just the server. Since our SharePoint environment is currently being shared with other applications, I understand that I may have to utilize DMV statistics to narrow down my analysis.
hi,
i have installed a new sql server 2005 instance.
as usual the data and log devices went to standard location.
as per my company policy i have to put data and log in different drives..
for eg. k:data
j:log
i have move master and other db's device files to new location and i can modify it using configuration manager
but i ahve to do it on many servers so thought if i can do it from command line could save me lot of time ( i can eventually automae whole procedure)
what commands are available to change such paramter..
i need to change startup parameters options -d -l -e
please help
thx
AK
I am getting following error when trying to install SQL express 2005 on XPSP2.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine SIGMA-805539A79 Error:2147944122 (0x800706ba).
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=70342
I tied re-installing WMI using http://blogs.msdn.com/jpapiez/archive/2004/12/09/279041.aspx link but could not get it working.
Do i need IIS installed? Its not installed on this box...
please suggest something... i am stuck...
Thanks,
I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
DEV
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Reporting Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
QA
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Common components
Integration Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Notification Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Workstation Components
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
===================================
Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do
thanks in advance Dave
Background:
SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go
http://sqljunkies.com/WebLog/knight_reign/archive/2005/01/24/6843.aspx
Wizard results:
Name:
ETL
Type:
SQL Server
Connection name:
ETLConfiguration
Any existing configuration information for selected configuration filter will be overwritten with new configuration settings.
Configuration table name:
[dbo].[SSIS Configurations]
Configuration filter:
PT_CUST_ABR
Target Property:
Package.Variables[User::gsPreLoad].Properties[Value]
Package.Variables[User::gsPostLoad].Properties[Value]
Package.Variables[User::gsLoad].Properties[Value]
Package.Variables[User::gsFlatFilename].Properties[Value]
Package.Variables[User::gsFileName].Properties[Value]
Package.Variables[User::gsCDOMailTo].Properties[Value]
Package.Variables[User::gsCDOMailSubject].Properties[Value]
Package.Variables[User::giRecordCount].Properties[Value]
Package.Variables[User::giFileSize].Properties[Value]
Package.Variables[User::giBatchID].Properties[Value]
Package.Variables[User::gdFileDateCreated].Properties[Value]
Package.Connections[MyDatabase].Properties[ServerName]
Package.Connections[MyDatabase].Properties[InitialCatalog]
USE [ETLConfiguration]
GO
/****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SSIS Configurations](
[ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL,
[PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL
) ON [PRIMARY]
I am looking to test this feature - and the "Transaction Performance Collector" has recommended me a table to port to In-Memory OLTP.Â
I have now tried the "Table Memory Optimization Advisor" tool.
After a couple of tweaks to the table design - the tool is now passing validation but the tool is not allowing to progress to the next step:
Could it be down to not having enough memory? But would this not show in the advisor?
Hello. I have received the follwoing error upon an attempt to Browse the Cube. All other tabs are functional, including the Calculations tab. We are running Windows Server 2003 SP2 and SQL Server 2005 SP2. Any suggestions would be greatly appreciated!
**EDIT** - Have confirmed SP1 for VS2005 is installed both locally and on server, also.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.Office.Interop.Owc11.PivotView.get_FieldSets()
at Microsoft.AnalysisServices.Controls.PivotTableFontAdjustor.TransformFonts(Font font)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdatePivotTable(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdateAll(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.InitialUpdate()
at Microsoft.AnalysisServices.Browse.CubeBrowser.SupportFunctionWhichCanFail(FunctionWhichCanFail function)
I've been researching AWE to determine if we should enable this for our environment.
Currently we have a quad core box with 4 gb of RAM (VMware). OS: Windows 2003 std, SQL Server 2005 std. 3GB is not set but will be as soon as we can perform maintenance on the server.
I have read mixed feedback on AWE, either it works great or grinds you to a hault. I would assume that the grinding to a hault is due to not setting the min/max values correctly or not enabling the lock page in memory setting.
We only have one instance of SQL on the server and this box won't be used for anything else aside from hosting SQL services. We do plan on running SSRS off of this server as well.
1. Will running SSRS and enabling AWE cause me problems? Will I have to reduce the max setting by the SSRS memory usage or will it share and play nice?
2. How do I go about setting the Max value? Should it be less than the physical RAM in the box? Right now its set to the default of 214748364, even if I don't enable AWE should this default value be changed?
3. It seems that even at idle the SQL server holds a lot of memory and the page file grows. If I restart the process in the morning, memory usage in taskmon is at 600mb or so. By the end of the day, its up around 2gb. How can I track down whats causing this, should this even concern me?
4. The lock Page in memory setting worries me. Everything I've read on this seems to give a warning about serious OS and other program support degradation. In some cases to the point where they have to restore the settings on the server before they can bring it back up. What are your thoughts on this.
It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
Let's have some comments
I have a Windows sever 2012 with sql server 2012 enterprise. Ram size is 22GB. Sometimes SQL sever takes 95% memory.My question, How to reduce memory size without killing any process because it's production server.So there are many background process is running. And,Is there any guides to learn why Memory is raise d so high and how to reduce it.
View 10 Replies View RelatedHello, I understand that we should use SSMS -> Server Properties -> Memory to put a cap on the SQL server memory usage, therefore it gives some space memory for OS, this is based on the fact if the max memory is not specified, SQL will use whatever available memory and eventually crash the system.
My question is that when a server has SSIS and SSAS services installed along with the SQL service. Would the max memory setting covers the SSIS and SSAS memory usage, or the SSIS and SSAS has to shared the memory with OS?
Thanks,
fshguo.
I am running Visual Studio 2005. I have an SSIS Package which is consuming a huge amount of memory. During the execution of the package the memory keeps increasing. Until finally i get an Out of Memory exception. I have run this package using dtexec, and in the BIDS. No difference. I do have some script components and have added some code to get the assemblies in the current appdomain. I do see that one particular assembly is increasing on every loop. VBAssembly every time it hits the script component is increasing by 6, and along with it the memory is climbing. What is this VBAssembly being used for is there an update to SQL Server Integration Services that I need?
Thanks! Aaron B.
sql server 2000 is running on windows server 2003 ... 4gb of memory on server .... 2003 was allocated 2.3gb nd sql server was allocated (and using all of it) 1.6gb for total of approx 4gb based on idera monitor software ... all memory allocated betweeen the OS and sql server .... then 4 more gb of memory added for total now of 8g ... now idera monitor shows 1.7gb for OS and 1.0 gb for sql server ..... 'system' info shows 8gb memory with PAE ... so I assume that the full 8gb can now be addressed .... why are less resources being used now with more total memory .... especially sql server ..... i thought about specifying a minimum memmry for sql server but i amnot convinced that would even work since it seems that this 1gb limit is artificial .... it it used 1.6 gb before why would it not use at least that much now ??
thank you
i want to create a lot of index for my database for performance.but i need find memory usage by indexes.
How to find memory usage by index in sql server?
I've a database with a memory optimized filegroup on it. How can I remove it?I have removed the memory optimized table I had on it, but when I try to remove the filegroup I receive an error.
View 12 Replies View RelatedHi,
I am going to install SQL Server 2000 (then SQL 2K5) on a Win Server 2K3 with 8 GB of ram, but it will be 16 GB in the near future.
I would like to reserve a fixed memory (for momemt less than 3-4 GB) for SQL Server and the rest for application (virtualization).
Without AWE enabled, max memory for SQL Server 2K5 is 4GB as for SQL Server 2000?
How can I manage and optimize memory keeping in mind AWE. (any doc, website available?)
Thank
So I started a new job recently and have noticed a few strange configurations. Typically I would never mess with min memory per query option and index create memory option configuration because i just haven't seen any need to. My typical thought is that if it isn't broke... They have been modified on every single server in my environment.
From Books Online:
• This option is an advanced option and should be changed only by an experienced database administrator or certified SQL Server technician.
• The index create memory option is self-configuring and usually works without requiring adjustment. However, if you experience difficulties creating indexes, consider increasing the value of this option from its run value.
Hello frnds Can Anybody explai what does it mean by question itself and how to resole it ?
View 2 Replies View RelatedHi
I did a load testing and found the following observations:
1. The Memory:Pages/sec was crossing the limit beyond 20.
2. The Target Server Memory was always greater than Total Server Memory
Seeing the above data it seems to be memory pressure. But I found that AvailableMemory was always above 200 MB. Also Buffer Cache HitRatio was close to 99.99. What could be the reason for the above behavior?
Hi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
Hi Guys,
Here's the current scenario:
I am creating a windows application to manage my ssis packages.
My SSIS packages use package configurations, and by default connect to the "SSIS Configurations" table in sql server.
However, I want it to connect to a view instead of this table, so i create a view "vwSSIS_Configurations" and point the package configuration to use the view in sql server.
The application SHOULD be capable of altering the package configuration's configuration and switch its connection between the default "ssis configurations" table, and the view.
Is this possible? I cannot think of a way which I can have my application switch the package configuration's connection.
Thanks,
kervy
I have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.
View 2 Replies View RelatedHi~, I have 3 questions about memory based bulk copy.
1. What is the limitation count of IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit(true)?
For example, how much insert row at below sample?(the max value of nCount)
for(i=0 ; i<nCount ; i++)
{
pIFastLoad->InsertRow(hAccessor, (void*)(&BulkData));
}
2. In above code sample, isn't there method of inserting prepared array at once directly(BulkData array, not for loop)
3. In OLE DB memory based bulk copy, what is the equivalent of below's T-SQL bulk copy option ?
BULK INSERT database_name.schema_name.table_name FROM 'data_file' WITH (ROWS_PER_BATCH = rows_per_batch, TABLOCK);
-------------------------------------------------------
My solution is like this. Is it correct?
// CoCreateInstance(...);
// Data source
// Create session
m_TableID.uName.pwszName = m_wszTableName;
m_TableID.eKind = DBKIND_NAME;
DBPROP rgProps[1];
DBPROPSET PropSet[1];
rgProps[0].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProps[0].colid = DB_NULLID;
rgProps[0].vValue.vt = VT_BSTR;
rgProps[0].dwPropertyID = SSPROP_FASTLOADOPTIONS;
rgProps[0].vValue.bstrVal = L"ROWS_PER_BATCH = 10000,TABLOCK";
PropSet[0].rgProperties = rgProps;
PropSet[0].cProperties = 1;
PropSet[0].guidPropertySet = DBPROPSET_SQLSERVERROWSET;
if(m_pIOpenRowset)
{
if(FAILED(m_pIOpenRowset->OpenRowset(NULL,&m_TableID,NULL,IID_IRowsetFastLoad,1,PropSet,(LPUNKNOWN*)&m_pIRowsetFastLoad)))
{
return FALSE;
}
}
else
{
return FALSE;
}
Hi,
I have an app in C# that executes a query using SQLCommand and parameters and is taking too much time to execute.
I open a SQLProfiler and this is what I have :
exec sp_executesql N' SELECT TranDateTime ... WHERE CustomerId = @CustomerId',
N'@CustomerId nvarchar(4000)', @CustomerId = N'11111
I ran the same query directly from Query Analyzer and take the same amount of time to execute (about 8 seconds)
I decided to take the parameters out and concatenate the value and it takes less than 2 second to execute.
Here it comes the first question...
Why does using parameters takes way too much time more than not using parameters?
Then, I decided to move the query to a Stored Procedure and it executes in a snap too.
The only problem I have using a SP is that the query can receive more than 1 parameter and up to 5 parameters, which is easy to build in the application but not in the SP
I usually do it something like
(@CustomerId is null or CustomerId = @CustomerId) but it generate a table scan and with a table with a few mills of records is not a good idea to have such scan.
Is there a way to handle "dynamic parameters" in a efficient way???
Hello:
I just recently bumped into this problem and I think I know what's causing it. This is the setup:
Report Parameters: FromDate, ToDate, DivisionalOffice, Manager, SalesRep
dsCalendarEvents Parameters: FromDate.Value, ToDate.Value, DivisionalOffice.Value,
dsDivisions Parameters: N/A
dsManager Parameters: DivisionalOffice.Value
dsSalesRep: DivisionalOffice.Label
When I query the ReportServices WS and scan the parameter dependencies for SalesRep it says there are four dependencies: FromDate, ToDate, DivisionalOffice and Manager!!!
If I change "dsSalesRep" to use "DivisionalOffice.Value" the ReportingServices WS parameter dependency scan returns only one dependency for "SalesRep" parameter!!!( This is the correct behavior )
Has anybody seen this behavior and more importantly, is there a work around?
Regards,
If I install SQL 2005 Standard on Windows 2003 Standard, is SQL limited to 4 gigs of physical RAM?
I'm planning a new system that will run SQL 2005 Standard edition on a Windows 2003 Standard platform. The spec calls for 8 GB of RAM. My experience would lead me to suspect I need to install Windows 2003 Enterprise to take advantage of all the installed memory.
Hello all,
Given:
string commandText = "Categories_Delete";SqlCommand myCommand = new SqlCommand(commandText, connection);myCommand.CommandType = CommandType.StoredProcedure;
Is there a reason NOT to use myCommand.Parameters.AddWithValue("@CategoryID",CategoryID); I'd prefer to use that over myCommand.Parameters.Add("@CategoryID", SqlDbType.Int, 4).Value = CategoryID; as I have these functions being created dynamically and hope to get away from a big lookup to try to convert System.Types into SqlDbTypes. [shudder]
It seems that ADO.NET makes an implicit conversion to the valid type. If this is correct then I can move on fat dumb and happy. Anyone have any good insight?
Thanks,
I have a Sql7.0 box inside a firewall and Sql6.5 outside the firewall. I would like to use a DTS to transfer data. I followed the KB artice on configuring SQL to listen on a specfic port, but still have problems. I added entries in Client Config on both machines. Still no luck, looks like the 7.0 box not talking on new port...
Any suggestions ????