SQL Query Results Into Local Variable
Oct 11, 2006Hi,
I'm trying to put the results from a SQL query that returns only one filed but one or more rows into a local variable in a comma separated format.
Any help is appreciated.
Thanks.
ADVERTISEMENT
Change Local Variable Inside Query
Jul 20, 2005/*Given*/CREATE TABLE [_T1sub] ([PK] [int] IDENTITY (1, 1) NOT NULL ,[FK] [int] NULL ,[St] [char] (2) NULL ,[Wt] [int] NULL ,CONSTRAINT [PK__T1sub] PRIMARY KEY CLUSTERED([PK]) ON [PRIMARY]) ON [PRIMARY]GOINSERT INTO _T1sub (FK,St,Wt) VALUES (1,'id',10)INSERT INTO _T1sub (FK,St,Wt) VALUES (2,'nv',20)INSERT INTO _T1sub (FK,St,Wt) VALUES (3,'wa',30)/*Is something like the following possible.The point is to change the value of the variableinside the query and use it in the calculated field.This doesn't compile of course, but is therea way to accomplish the same thing?*/DECLARE @ndx intSET @ndx = 1SELECT(a.FK+ (CASE WHEN @ndx > 0THEN (SELECT @ndx = b.WtFROM _T1sub bWHERE b.Wt = a.Wt)ELSE 0 END)) as FKplusWTFROM _T1sub a/*Output would look like this:*/FKplusWT-----------112233/*I know, I can get this output just by addingFK+WT. This is not about that.This is about setting vars inside a query*/thanks, Otto Porter
View 1 Replies View RelatedUsing Local Variable Making The Query Slow
May 28, 2008
Hi,
I am using a local variable to capture datetime and then select records from another table by making use of the above local variable result. But the query is running too slow when I use the local variable
declare @a smalldatetime
select @a=last_run_time from job_status
where job_des='sample'
SELECT * FROM History
WHERE CHANGE_DATE> @a
Instead of the above select statement if I use the below statement it is returning results quickly. Can someone help me in tuning the above query.
SELECT * FROM History
WHERE CHANGE_DATE> '5/23/2008 6:22:00.000 AM '
History table has columns ( case number, change_date, change_desc). I have two indexes defined on the above table one is on case_number and the other on change_date.I tried using force index but still the query is running slow.
will there be any difference if use dynamic sql ?
Is It Possible To Store The Result Of A Dynamic Query In A Local Variable
Dec 19, 2000I have a dynamic query which returns me a result and I want to capture that value to make further use of it in the same code. Is that possible??
exec ('select col_nm from table_name'). i want the result of this query to be captured.
DP
Assing Dynamic Query Result To A Local Variable....
Jul 9, 2004Hi:
Is there a way to assign a dynamic query result to a local variable?
declre @sqlString nvarchar(4000),
@minEventDate datetime,
@databaseName varchar(25)
selct @databaseName = 'customer_12345'
(actually, a cursor loop will assign the database name dynamically, here just to simplify the situation)
select @sqlString =
'select ' + @minEventDate + '= (select min(eventDate) from ' + @databaseName + '.dbo.tblABC)'
exec sql_executesql @sqlString
print '@minEventDate: ' + cast(@minEventDate as varchar(19))
Though the select min(eventDate) from customer_12345.dbo.tblABC
returns a date, ex. '02/01/2004 12:35 pm', however, the printed @minEventDate is always with Null value. It mean, the value was never correctly assigned to the local variable.
As an alternate way, I am using temp table to insert it with the query result and then assign to the local variable. Since I have many local variables to try to get the min, max, count for around 10 fields, perfer a way to direct assign to the local variable instead of 10 temp tables.
thanks
-D
Dynamic Query, Local Cursor Variable And Global Cursors
Oct 3, 2006Hi all.
I am stuck in a bit of a conundrum for quite a while now, and I hope someone here will help me figure this one out.
So, first things first: let me explain what I need to do. I am
designing a web application that will allow users to consult info
available in a SQL2000 database. The user will enter the search
criterea, and hopefully the web page will show matching results.
The problem is the results shown aren't available per se in the DB, I
need to process the data a bit. I decided to do so on the SQL Server
side, though the use of cursors. So, when a user defines his search
criteria, I run a stored procedure that begins by building a dynamic
sql query and creating a cursor for it. I used a global cursor in order
to do so. It looked something like this:
SET @sqlQuery = ... (build the dinamic sql query)
SET @cursorQuery = 'DECLARE myCursor CURSOR GLOBAL FAST_FORWARD FOR ' + @sqlQuery
EXEC @cursorQuery
OPEN myCursor
FETCH NEXT FROM myCursor INTO ...
CLOSE myCursor
DEALLOCATE myCursor
This works fine, if there's only one instance of the
stored procedure running at a time. Should another user connect to the
site and run a search while someone's at it, it'll fail due to the
atempt to create a cursor with the same name.
My first thought was to make the cursor name unique, which led me to:
...
SET @cursorName = 'myCursor' + @uniqueUserID
SET @cursorQuery = 'DECLARE '+ @cursorName + 'CURSOR FAST_FORWARD FOR ' + @sqlQuery
EXEC @cursorQuery
...
The problem with this is that I can't do a FETCH NEXT FROM @cursorName since
@cursorName is a char variable holding the cursor name, and not a
cursor variable. So to enforce this unique name method the only option
I have is to keep creating dynamic sql queries and exucting them. And
this makes the sp a bitch to develop and maintain, and I'm guessing it
doesn't make it very performant.
So I moved on to my second idea: local cursor variables. The problem with
this is that if I create a local cursor variable by executing a dynamic
query, I can't extract it from the EXEC (or sp_executesql) context, as
it offers no output variable.
I guess my concrete questions are:
Is it possible to execute a dynamic sql query and extract a (cursor) variable from it?Is it possible to populate a local cursor variable with a global cursor, by providing the global cursor's name?Can I create a local cursor variable for a dynamic sql query? How?
Anybody sees another way arround this?Thanks in advance,
Carlos
How To Store The Results Of A Query In A Variable.
Jun 25, 2007Can anyone tell me or point me in the direction of how I can store select query results to a variable in VB.NET? Im using the SqlDataSource control with dropdowns and textboxes for searching. I want to store the search results in a variable on the button click event.
View 2 Replies View RelatedStoring Query Results In A Variable
Mar 28, 2001Can someone tell me how to store the results of a multi-row query in a text or varchar variable so that I might do something like this:
declare @var1 text
select @var1 = {results of select date, count(*) from testtable2 group by date)
Thanks!
joe
How To Assign Query Results Into A Variable
Apr 4, 2008Hello,
Could anyone help me please,
I need a select to add the results into a variable of type string
id(int) name (varchar2)
1 a
2 b,c
3 d,e,f,g
tried wit the following:
DECLARE @variable1
SELECT @variable1 = name
FROM table
The problem with this sentece is that the only value assigned to @variable1 is the last row value, i.e.
@variable1 = "d,e,f,g"
What I need is to concatenate all values returned by the query, i.e.
@variable1 = "a,b,c,d,e,f,g"
Thank you very much in advance,
Marco
Assign A Variable Based Upon Query Results...how To Do It?
Feb 23, 2007I have the following code which is incomplete. Where it says: txtVendorID = I need it to equal the results of the field VendorID from my query...here is my code. What do I need to add there?
Dim cmdSelect As SqlCommandDim intRecordIDintRecordID = Request.QueryString("RecordID")strConn = ConfigurationManager.AppSettings("conn")conn = New SqlConnection(strConn)cmdSelect = New SqlCommand("spMfgRepListAddaspxByRecordID", conn)cmdSelect.CommandType = CommandType.StoredProcedurecmdSelect.Parameters.AddWithValue("@RecordID", intRecordID)conn.Open()cmdSelect.ExecuteReader()txtVendorID.Text = conn.Close()
Invalid Results For Order By On Select Query Against Table Variable
Jan 21, 2008I am attempting to sort the results of a query executed against a table variable in descending order. The data is being inserted into the table variable as expected, however when I attempt to order the results in descending order, the results are incorrect. I have included the code as well as the result set.
DECLARE @tblCustomRange AS TABLE
(
RecordID INTEGER IDENTITY(1,1),
RangeMonth INTEGER,
RangeDay INTEGER
)
DECLARE @Month INTEGER
DECLARE @Day INTEGER
-- Initialize month and day variables.
SET @Month = 8
SET @Day = 11
-- Insert records into the table variable.
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,2)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,27)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (6,10)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (9,22)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (12,16)
-- Select everything from the table variable ordering the results by month, day in
-- descending order
SELECT * FROM @tblCustomRange
WHERE (RangeMonth < @Month) OR
(RangeMonth = @Month AND RangeDay <= @Day)
ORDER BY RangeMonth, RangeDay DESC
I am getting the following resultset:
RecordID RangeMonth RangeDay
----------- ----------- -----------
2 1 27
1 1 2
3 6 10
I am expecting the following resultset:
RecordID RangeMonth RangeDay
----------- ----------- -----------
3 6 10
2 1 27
1 1 2
Local Variable
May 27, 2004I am trying to create a procedure or function that will deal with weekly information for staff records.
Rather than declaring 14 local variables for the information, is it possible to declare a local variable as an array? Sorry for using VB terminology - not sure how SQL would describe it.
TIA
Fatherjack
Problem With A Local Variable
Dec 19, 2001Hello everybody,
Here I have two tables. Let's call them A and B.
A contains the folowing data: (address of persons)
PostCode Street Number CdeTour
-------- ------ ------ -------
31000 Well. 0025 NULL
31000 Well. 0050 NULL
31000 Wash. 0010 NULL
B contains the folowing data:
PostCode Street FirstEven LastEven FirstOdd LastOdd CdeTour
-------- ------ --------- -------- -------- ------- -------
31000 Well. 0002 0040 0043 0073 100
31000 Well. 0042 0084 0001 0041 200
31000 Wash. 0002 0050 0001 0049 100
* My problem is that I want to update the field A.CdeTour depending on the data present in B.
Let's take the first line from the table A: the number of the street 'well.' is '25', and '25' is odd and between '1' and '41' which meens that I should update my field A.CdeTour should be set to '100' (B.CdeTour).
Let's take another example, so in the second line: the street is still 'well.' but here the number is '50'. '50' is even and between '42' and '84' so the field A.CdeTour should be set to '200' (B.CdeTour).
Here I wrote a query, which doesn't work properly:
DECLARE @Num VARCHAR(4)
UPDATE A
SET @Num = Number, CodeTournee=
CASE WHEN @Num % 2 = 0 THEN(
-- even number of street
SELECT CdeTour
FROM B
WHERE @Num BETWEEN FirstEven AND LastEven
AND A.PostCode = B.PostCode
AND A.Street = B.Street
)ELSE(
-- odd number of street
SELECT CdeTour
FROM B
WHERE @Num BETWEEN FirstOdd AND LastOdd
AND A.PostCode = B.PostCode
AND A.Street = B.Street
)END
FROM A, B
The query runs but the problem is that it doesn't update the field, because it doesn't interpret @num by its value.
In fact, if instead of @num, I hard-code a value it works
... WHERE '0025' BETWEEN FirstOdd AND LastOdd ...
Can someone help me???? I would be very pleased, if someones could give me another way of doing it or a trick in order to avoid this problem.
Thanks in advance.
Transact SQL - Local Variable
Jun 28, 2004I execute the following in my Query Analyzer:
Declare @Test varchar(8000)
Set @Test='SELECT VIOXX_LastName + '' + VIOXX_FirstName + '' + CONVERT(varchar(50), VIOXX_Number) AS PlaintiffsName, VIOXX_Number
FROM tblPlaintiff WHERE VIOXX_Number NOT IN(SELECT VIOXX_Number FROM tblCase_Plaintiff) OR
VIOXX_Number IN (SELECT tblCase_Plaintiff.VIOXX_Number FROM tblCase INNER JOIN tblCase_Plaintiff ON tblCase.Case_Number = tblCase_Plaintiff.Case_Number
WHERE (tblCase.Status = ''InActive'')) ORDER BY VIOXX_Number, VIOXX_LastName'
Select @Test
and get the following result:
SELECT VIOXX_LastName + ' + VIOXX_FirstName + ' + CONVERT(varchar(50), VIOXX_Number) AS PlaintiffsName, VIOXX_Number
FROM tblPlaintiff WHERE VIOXX_Number NOT IN(SELECT VIOXX_Number FROM tblCase_Plaintiff) OR
VIOXX_Number IN (SELECT
the latter part of my original text is not stored in the variable. Is there some limitation on the number of characters for a local variable in transact sql?
Any ideas? Thanks in advance.
Text Local Variable
Jan 17, 2007Hi All,
How to declare TEXT datatype as local variable . My data is getting truncated as it cross varchar(8000) characters.
Saju
Local Variable Slows Down SP (?)
Dec 17, 2007Hi guys I am sitting and testing som variants of this simple SP, and I have an question that I couldent answer with google or any thread in this forum.
Perhaps I am doing something really easy completly wrong here.
Why does the local variables in the first code segment slow down the overall execution of the procedure?
Dont mind the logic why I have them there are only testing som things out.
If i declare two variables the same way:
DECLARE @v INT
SET @v = 100
When I use it in a WHERE CLAUSE:
...WHERE [V] BETWEEN @v AND @x)
Is there any different then
...WHERE [V] BETWEEN 100 AND 200)
Cant figure this out, why does it hurt the performance so bad? As a C# guy its the same thing ?
Thanks in advance
/Johan
Slow
ALTER PROCEDURE [dbo].[spStudio_Get_Cdr]
@beginDate DATETIME = null,
@endDate DATETIME = null,
@beginTime INT,
@endTime INT,
@subscribers VARCHAR(MAX),
@exchanges VARCHAR(MAX) = '1:',
@beginDateValue int,
@endDateValue int
AS
BEGIN
SET NOCOUNT ON;
DECLARE @s INT
SET @s = @beginDateValue
DECLARE @e INT
SET @e = @endDateValue
print @s
print @e
DECLARE @exch TABLE(Item Varchar(50))
INSERT INTO @exch
SELECT Item FROM [SplitDelimitedVarChar] (@exchanges, '|') ORDER BY Item
DECLARE @subs TABLE(Item Varchar(19))
INSERT INTO @subs
SELECT Item FROM [SplitDelimitedVarChar] (@subscribers, '|') ORDER BY Item
SELECT [id]
,[Abandon]
,[Bcap]
,[BlId]
,[CallChg]
,[CallIdentifier]
,[ChgInfo]
,[ClId]
,[CustNo]
,[Digits]
,[DigitType]
,[Dnis1]
,[Dnis2]
,[Duration]
,[FgDani]
,[HoundredHourDuration]
,[Name]
,[NameId]
,[Npi]
,[OrigAuxId]
,[OrigId]
,[OrigMin]
,[Origten0]
,[RecNo]
,[RecType]
,[Redir]
,[TerId]
,[TermAuxId]
,[TermMin]
,[Termten0]
,[Timestamp]
,[Ton]
,[Tta]
,[Twt]
,[Level]
FROM
[dbo].[Cdr] AS C
WHERE
(C.[DateValue] BETWEEN @s AND @e)
AND
(C.[TimeValue] BETWEEN @beginTime AND @endTime)
AND
EXISTS(SELECT [Item] FROM @exch WHERE [Item] = C.[Level])
AND
(EXISTS(SELECT [Item] FROM @subs WHERE [Item] = C.[OrigId] OR [Item] = C.[TerId]))
END
Fast
ALTER PROCEDURE [dbo].[spStudio_Get_Cdr]
@beginDate DATETIME = null,
@endDate DATETIME = null,
@beginTime INT,
@endTime INT,
@subscribers VARCHAR(MAX),
@exchanges VARCHAR(MAX) = '1:',
@beginDateValue int,
@endDateValue int
AS
BEGIN
SET NOCOUNT ON;
DECLARE @exch TABLE(Item Varchar(50))
INSERT INTO @exch
SELECT Item FROM [SplitDelimitedVarChar] (@exchanges, '|') ORDER BY Item
DECLARE @subs TABLE(Item Varchar(19))
INSERT INTO @subs
SELECT Item FROM [SplitDelimitedVarChar] (@subscribers, '|') ORDER BY Item
SELECT [id]
,[Abandon]
,[Bcap]
,[BlId]
,[CallChg]
,[CallIdentifier]
,[ChgInfo]
,[ClId]
,[CustNo]
,[Digits]
,[DigitType]
,[Dnis1]
,[Dnis2]
,[Duration]
,[FgDani]
,[HoundredHourDuration]
,[Name]
,[NameId]
,[Npi]
,[OrigAuxId]
,[OrigId]
,[OrigMin]
,[Origten0]
,[RecNo]
,[RecType]
,[Redir]
,[TerId]
,[TermAuxId]
,[TermMin]
,[Termten0]
,[Timestamp]
,[Ton]
,[Tta]
,[Twt]
,[Level]
FROM
[dbo].[Cdr] AS C
WHERE
(C.[DateValue] BETWEEN @beginDateValue AND @endDateValue)
AND
(C.[TimeValue] BETWEEN @beginTime AND @endTime)
AND
EXISTS(SELECT [Item] FROM @exch WHERE [Item] = C.[Level])
AND
(EXISTS(SELECT [Item] FROM @subs WHERE [Item] = C.[OrigId] OR [Item] = C.[TerId]))
END
T-SQL (SS2K8) :: Set A Local Variable
Feb 24, 2015declare @filename varchar(255),
@path varchar(255),
@sql varchar(8000),
@sql3 varchar(8000),
[Code].....
i need to set a Apostrophe in front of dir and at the end
Concatenate Local Variable
Jun 17, 2008Hi guys,
I have a cursor that loops over a table and I use a local variable to append the column data. However when I try to print this variable, it comes as empty!
The code is
declare @testVar varchar(max)
<cursor loop begins>
set @testVar = @testVar + ',' + @SomeColName
<cursor loop ends>
print 'Value: ' + @testVar
I can't understand why the @testVar is empty, since the @SomeColName has a value in every iteration.
Thanks!
Insert Local Variable Value
Dec 15, 2006Is there an expression syntax for putting a local variable value into a text box like there is for putting a parameter value? I'm using the report builder via VS
View 4 Replies View RelatedUsing TEXT Datatype As Local Variable In SP Or UDF
Mar 12, 2003I've created a stored procedure that converts an input string in richtext format (input as type TEXT) to plain text. I would like to be able to return this newly converted string, but I need to have some way of storing it in a local variable. My problem is that since I can't use the TEXT datatype as a local variable, I have no way of storing the large amounts of text I converted within the procedure. The VARCHAR(8000) just isn't large enough for my purposes. Anyone have any suggestions on how to go about doing this?
View 2 Replies View RelatedIDENTITY - Using A Local Variable Value For A Seed Value
Mar 22, 1999I'm trying to have an identity column seed value specified with a local variable value as follows, however it
doesn't allow me to do it (Says cannot use a variable name for a seed value).
Any ideas or suggestions?
DECLARE @idvalue int
SELECT @idvalue = max(accountid) + 1
FROM account
CREATE TABLE accounttemp
(Accountid int IDENTITY(@idvalue,1),
name char(10),
address char(10))
Determining If A Local Variable Exists
Jun 11, 2007Is there a way to determine if a local variable exists or not?
There's a parameter I often use in code called @guid_batch that is usually declared in the parameter of a stored proc, but when in debugging it would be nice to have it available without having to change code.
Is there something that I could do similar to the following
Code:
IF VARIABLE_ID('@guid_batch') IS NULL
BEGIN
DECLARE @guid_batch UNIQUEIDENTIFIER
SELECT @guid_batch = NEWID()
END
Thanks in advance,
-MBirchmeier
Select @Local-Variable From TestTable.!!!?
Oct 7, 2007Hi all
Imagine we have a table as follow:
Create Table Test(
Pkey int not Null identity Primary Key,
Name varchar(20) not null,
Famil varchar(30) not null
)
now is there anyway to Run following Script:
declare @FLDName varchar(10)
set @FLDName='Name'
Select @FLDName from Test
in the other hand is there anyway to use Local variables in a SELECT statements as above?
to tell you the truth , what really motivated me to do this , was being able to declare a User-Defined-Function and passing some fields as an String and then use them in a SELECT statement or any other T-Sql codes!!!
Could anyone help me.?
Kind Regards.
Slecting A Table Using A Local Variable Name
Jul 23, 2005I am new at sql so would appreciate some helpI have the name of a table in alocal variable is it possible to select thistableDECLARE @name sysnameSET @name = 'tblSniffedItems'PRINT @nameSELECT * FROM @nameI expected this wo work but I got the following error.@name is declare as far as I knowServer messageMust declare the variable '@name'.Thanks in advanceAndre
View 4 Replies View RelatedADO Errors After Changing SP To Use Local Variable
Mar 16, 2007 Changed stored procedure
[dbo].[spLogonName @pNewLogonName varchar(60) AS
SELECT * FROM .dbo.tblUser Where vcLogonName = @pNewLogonName
to
[dbo].[spLogonName @pNewLogonName varchar(60) AS
DECLARE @Local_pNewLogonName varchar(60)
SET @Local_pNewLogonName = @pNewLogonName
SELECT * FROM .dbo.tblUser Where vcLogonName = @Local_pNewLogonName
and started getting this error on the web page.
ADODB.Recordset error '800a0cb3'
Current Recordset does not support updating. This may be a limitation of the provider, or of the selected locktype.
Does anyone know why this is happening? Nothing on the site has changed. If I change the sp back the errors go away. I'm trying to use local variables in all SP to avoid the slowness that can happen when using the parameter varibles.
Retrieving To Local Variable From Select Top ...
Feb 29, 2008Hi,
I€™ve got the following statement :
SELECT TOP(1) Date, Status FROM TABLE1 WHERE TEC_STATUS = 1 ORDER BY DATE DESC
I want to retrieve the status field to a variable, but I€™m not being able to do so€¦ I think its due to the TOP function€¦
I have tried those with no success:
SELECT @var2 = TOP(1) [Date], @var = [ Status] FROM TABLE1 WHERE TEC_STATUS = 1 ORDER BY DATE DESC
SELECT @var2 = [TOP(1) Date], @var = [ Status] FROM TABLE1 WHERE TEC_STATUS = 1 ORDER BY DATE DESC
Is there Any way I can do that ?
Thanks
Dispaying A Local Variable In A Cell
Feb 25, 2008
hi,
i'm fairly new to visual studio and have a select statment which is displayed fine in my report, i have headings however of which one i'd like as a variable that i've declared and set
declare @MyVariable varchar(6)
set @MyVariable = "abcdef"
i know how to display a field in a cell like follows:
=Fields!Code.Value
or a parameter like follows:
=Parameters!month.Value
but how do i display my local variable called @MyVariable?
thanks in advance.. I've searched but can't find out how to do this and it's probably really obvious!!
kev
Is There A Way To Hold The Results Of A Select Query Then Operate On The Results And Changes Will Be Reflected On The Actual Data?
Apr 1, 2007hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies View RelatedNeed To Display Results Of A Query, Then Use A Drop Down List To Filter The Results.
Feb 12, 2008Hello. I currently have a website that has a table on one webpage. When a record is clicked, the primary key of that record is transfered in the query string to another page and fed into an sql statement. In this case its selecting a project on the first page, and displaying all the scripts for that project on another page. I also have an additional dropdownlist on the second page that i use to filter the scripts by an attribute called 'testdomain'. At present this works to an extent. When i click a project, i am navigated to the scripts page which is empty except for the dropdownlist. i then select a 'testdomain' from the dropdownlist and the page populates with scripts (formview) for the particular test domain. what i would like is for all the scripts to be displayed using the formview in the first instance when the user arrives at the second page. from there, they can then filter the scripts using the dropdownlist.
My current SQL statement is as follows.
SelectCommand="SELECT * FROM [TestScript] WHERE (([ProjectID] = @ProjectID) AND ([TestDomain] = @TestDomain))"
So what is happening is when testdomain = a null value, it does not select any scripts. Is there a way i can achieve the behaivour of the page as i outlined above? Any help would be appreciated.
Thanks,
James.
How Do I Move Sql Variable Values To Local Variables
Nov 2, 2006Can someone show how to do this?I have a SqlDataSource1, and i have a SELECT * FROM Table1How would i get@ProdName@ProdNumber Into the following local variablesString ProductNameInt ProductNumber I’m using C# and ASP 2.0 VWDThanks for Help1
View 2 Replies View RelatedStore Count Result In A Local Variable
Feb 10, 2000Hi All,
I need to store the row count from two different servers (one 6.5 and one 7.0)
to compare by doing this:(in T-SQL)
declare @kount1 int, @kount2 int
exec master..xp_cmdshell 'isql -Sserver65 -d dbA -T -Q "select count(*) from tableA",no_output
exec master..xp_cmdshell 'isql -Sserver70 -d dbA -T -Q "select count(*) from tableA",no_output
How can I save the rowcount in @kount1, @kount2 respectively for comparison?
Appreciate your feedback.
David Nguyen
@local Variable Column Data Type
May 23, 2001In a stored proc, can you declare a local variable that is an existing column in a table & then based on other criteria, do an order by using the local variable?
View 1 Replies View RelatedLocal Variable Assignment In CREATE TRIGGER
Mar 7, 2006Hi Guys,
i'm batttling with the below Trigger creation
__________________________________________________ _
CREATE TRIGGER dbo.Fochini_Insert ON dbo.FochiniTable AFTER INSERT AS
BEGIN
DECLARE @v_object_key VARCHAR(80)
DECLARE @v_object_name VARCHAR(40)
DECLARE @v_object_verb VARCHAR(40)
DECLARE @v_datetime DATETIME
SELECT ins.Cust_Id INTO @v_object_key FROM inserted ins <--- my problem area!!
SET @v_object_name = 'FochiniTable'
SET @v_object_verb = 'Create'
SET @v_datetime = GETDATE()
IF ( USER <> 'webuser' )
INSERT INTO dbo.xworlds_events (connector_id, object_key, object_name, object_verb, event_priority, event_time, event_status, event_comment)
VALUES ('Fochini', @v_object_key, @v_object_name, @v_object_verb, '1', @v_datetime,'0', 'Triggered by Customer CREATE')
END
________________________________________________
i'm trying to get the INSERTED variable from table FochiniTable on colomn Cust_Id
and the statement: SELECT ins.Cust_Id INTO @v_object_key FROM inserted ins - is failing [still a newbie on mssql server 2000]
any help will be appreciated
lehare.