I want to run a query overnight through the SQL agent using osql. However I need to turn off the print header option that you normally turn off through the advanced options tab in the Query Analyzer. Does anyone know if this is possible?? Many Thanks in advance..
View 1 RepliesHi,
i want to create a sqldatasource in VWD also with advanced (insert, delete, update) option.
This works fine for 'normal' tables, but when i try to do that with e.g. aspnet_roles table (indicated as vw_aspnet_Roles in dropdownlist of VWD), or aspnet_users table, that advanced option is not available, even when i select all fields.
Why, and how can i solve that?
Thanks
Tartuffe
So I started a new job recently and have noticed a few strange configurations. Typically I would never mess with min memory per query option and index create memory option configuration because i just haven't seen any need to. My typical thought is that if it isn't broke... They have been modified on every single server in my environment.
From Books Online:
• This option is an advanced option and should be changed only by an experienced database administrator or certified SQL Server technician.
• The index create memory option is self-configuring and usually works without requiring adjustment. However, if you experience difficulties creating indexes, consider increasing the value of this option from its run value.
I want to query a database through a ASP.NET page and I want to set the page up like an advanced search page would look. My question is, how do I write the stored procedure and/or what value do I pass from ASP.NET to accomplish null or blank values. For instance, if someone wants to query by TRIP id and not vehicle ID then how do I write the where claue?
View 10 Replies View RelatedI have the following figured out, however what I want to do is almost come up with a new column based on if the row actually exists in the employeeeval column:
SELECT e.DeptID, e.LastName + ', ' + e.FirstName AS EmpName, e.EmployeeID, u.UserName FROM Employee e LEFT OUTER JOIN EmployeeEval ev ON e.EmployeeID = ev.EmployeeID LEFT OUTER JOIN [User] u ON u.Department = e.DeptID WHERE (u.RoleID = 'supervisor') AND (e.CompanyID = @CompanyID) AND (e.FacilityID = @FacilityID) AND (ev.PersonalScore IS NULL) ORDER BY e.DeptID, e.LastName
so in my select I want to add something like ev.approved which then that brings back either Null or 0. Then based on that create a variable to bring back as a string and if it = 0 make my string say 'In Progress' and if it's Null, say 'Not Started'. I would imagine I would need a Declare @Status nvarchar(15) --- but I get lost after that b/c wouldn't I need some sort of way to count throught the rows of my result set and do an IF statement? I can't quite figure this process out, after numerous attempts.
Hi!
I'm trying to get the following query to work:
SELECT item.name AS name, t15.f167 AS start, t15.f168 AS end, t15.f180 AS organizer
FROM item, t15
WHERE item.row_id = t15.id AND t15.f167 > getDate()
UNION ALL
SELECT item.name AS name, t30.f221 AS start, t30.f222 AS end, '<a class=kalender_link href=http://www.xxx.no/default.asp?V_ITEM_ID=' + item.id
+ '> KAN < / a > '
FROM item, t30
WHERE item.row_id = t30.id AND t30.f221 > getDate()
ORDER BY start DESC
The problem is the organizer field. I need to generate an url, but I get all sorts of problems with data types, ie. you can convert an int into ntext.
So the question is basically, how do I get the following to work:
'<a class=kalender_link href=http://www.xxx.no/default.asp?V_ITEM_ID=' + item.id + '> KAN < / a >'
Vidar
Hi,This is my basic sql shape query:------------------------------------------------------------SHAPE {select * from tbl1}APPEND({SELECT * FROM tbl2 where field1=1} AS RS2 RELATE field TOfield)------------------------------------------------------------With this query i get a RecordSet (RS1), who handle all the recordsfrom table tbl1, and a secondary RecordSet (RS2) who handle all therecords from table tbl2, who applies to the criteria that field1=1.It is possible that RS2 will be empty (zero records) since there is norecord in tbl2 who applies to that criteria.My wish is to design a query, that will collect only the records fromtbl1, that will have records from tbl2 who applies to the criteria -that RS2 won't be empty !I want to influence on the main part of the query (RS1), through thecriteria that is being used in the secondery query (RS2).I hope that my question is clear enough. thanks !
View 3 Replies View RelatedDear Expert,I have 2 tables as the following,Table : ProductColumn : ID, Code, NameTable : TrxColumn : Trx_ID, Trx_Date, Product_IDHow can perform the following query in MSSQL or is there any other wayto perform the same query ??? For you info I can do this in Sybase andit's work fine. Thank you.================================================== ==========Select Trx.Product_ID,(Select Produc.CodeFrom ProductWhere Product.ID = Trx.Product_ID) as Product_CodeFrom TrxWhere Product_Code = '0001'================================================== ==========Regards,Chen Fock Siong2004-05-27
View 4 Replies View RelatedTHIS LOOKS LIKE A LOT BUT I JUST WANTED TO GIVE ALL INFORMATION NEEDED FOR YOU TO EASILY ASSIST ME. I am not good with SQL so please bare with me. I will give a dumbed down table for us to work with:timestamp - DATA1 - DATA2 - MAXVALUENEEDED - DATA32006/8/12 12:00 123 125 1289 121 2006/8/12 12:05 124 128 1291 1232006/8/15 12:00 130 128 1190 1242006/8/15 1:00 131 127 1196 123 The columns labeled DATA do not really matter. The only important ones are timestamp and MAXVALUENEEDED but I do need the query to return all columns. What the query has to do: The query needs to find the MAX of MAXVALUENEEDED for a given DAY. Example Output- 2006/8/12 124 128 1291 1232006/8/15 131 127 1196 123As you can see the MAX values were grabbed for each given day and the unique records were returned on a per day basis. My current SQL Query is: SELECT CONVERT(varchar, timestamp, 101) AS Time, CONVERT(int,LV50AEPM_AMPS_A_VAL0) AS AMPS_A, CONVERT(int,LV50AEPM_AMPS_B_VAL0) AS AMPS_B, CONVERT(int,LV50AEPM_AMPS_C_VAL0) AS AMPS_C,
CONVERT(int,LV50AEPM_KVA_TOT_VAL0) AS KVA_TOTAL, CONVERT(int,LV50AEPM_KW_TOT_VAL0), CONVERT(int,LV50AEPM_VLL_CA_VAL0), CONVERT(int,LV50AEPM_VLL_BC_VAL0), CONVERT(int,LV50AEPM_VLL_AB_VAL0)
FROM Table_1 T1
WHERE CONVERT(int,T1.LV50AEPM_KVA_TOT_VAL0) = (SELECT MAX(CONVERT(int,T2.LV50AEPM_KVA_TOT_VAL0)) FROM Table_1 T2 WHERE CONVERT(varchar,T1.timestamp,101) = T2.timestamp)
ORDER BY Time ASC The problem is it only returns the max value for one day instead of all days. Can anyone help me correct this? Thanks in advance for your help.
Ok,
I need to select a list of products based on a complex criteria. First off, here is a list of the tables I am using and their function.
Dbo.Products – This table holds product names and information.
Dbo.Products_Attributes – This table holds a list of attributes for each product. It has a many to 1 relationship with Products. This table holds only 2 fields – ProductID and AttributeID
Dbo.Customers – This table holds basic customer information and some of the needed criteria for the product search.
Dbo.Customers_Attributes – This table contains a list of attributes that the customer needs in his/her products. This table has a many to 1 relationship with Customers and only has 2 fields, CustomerNum and AttributeID
Dbo.Attributes – This table contains all of the different attributes possible for our products to have. Each can be used by a customer when choosing criteria.
Background: Each attribute is a True / False. Either they want that attribute, or they do not care if they get it or not. This is where the hard part comes in. If a particular attribute is listed as needed in dbo.Customers_Attributes, then I do not want any records pulled from Products that DOES NOT have this attribute. On the other hand, if the attribute is NO listed in the customers_attributes list, it is assumed that the customer wants it. In other words, if there were NO attributes in the customers_attributes list, ALL products would be returned. Attributes listed in the customers_attributes table are “required� (no product will be returned that does not have what is in the list).
I hope I was clear enough… I had to change the table names a functions slightly because of some stupid policy about giving out too much proprietary information here.
If any of you know how to do the above with a subquery of some kind, please let me know.
Dave Larson
Hi query-experts,
I have an application that connects to a db running on SQL server 2000. I want the user to be able to do a google-like search, which returns all records containing all given keywords specified by the user in any of the fields, example:
Table has the fields: id, fruit, color
User enters: apple pear green
The query should return all records that contain apple AND pear AND green in any of the fields.
Now I do it like this:
SELECT * FROM table WHERE (fruit LIKE '%apple%' OR fruit LIKE '%pear%' OR fruit LIKE '%green%') AND (color LIKE '%apple%' OR color LIKE '%pear%' OR color LIKE '%green%')
this query works fine, but since my actual table contains about 10 fields that have to be searched, the query get's quite huge, especially when 2 or more keywords are given.
Question: is there an easier way to achieve this?
(this is what my query actually looks like, using the keywords dekker warmenhuizen 0226:)
SELECT
tKlant.nKlant AS nKlant,
MAX(sAchternaam) AS sAchternaam,
MAX(sVoornaam) AS sVoornaam,
MAX(sVoorletters) AS sVoorletters,
MAX(sBedrijfsnaam) AS sBedrijfsnaam,
MAX(sPlaats) AS sPlaats,
MAX(sStraat + ' ' + sHuisnummer) AS sAdres,
MAX(sPostcode) AS sPostcode,
MAX(sCommunicatie) AS sCommunicatie,
(CASE DATALENGTH(mOverig) WHEN 0 THEN 0 ELSE 1 END) AS HasOverig,
MAX(sKlantGroep) AS sKlantGroep
FROM tKlant
LEFT JOIN tKlantGroep ON tKlant.nKlantGroep = tKlantGroep.nKlantGroep
LEFT JOIN tCommunicatie ON tKlant.nKlant = tCommunicatie.nKlant
LEFT JOIN tAdres ON tKlant.nKlant = tAdres.nKlant
WHERE (tKlant.sAchternaam LIKE '%dekker%' OR tKlant.sBedrijfsnaam LIKE '%dekker%' OR tKlant.sKlant LIKE '%dekker%' OR tKlant.sVoornaam LIKE '%dekker%' OR tKlant.mOverig LIKE '%dekker%' OR tCommunicatie.sCommunicatie LIKE '%dekker%' OR tAdres.sStraat + ' ' + tAdres.sHuisnummer LIKE '%dekker%' OR tAdres.sPostcode LIKE '%dekker%' OR tAdres.sPlaats LIKE '%dekker%' OR tKlantGroep.sKlantGroep LIKE '%dekker%')
AND (tKlant.sAchternaam LIKE '%warmenhuizen%' OR tKlant.sBedrijfsnaam LIKE '%warmenhuizen%' OR tKlant.sKlant LIKE '%warmenhuizen%' OR tKlant.sVoornaam LIKE '%warmenhuizen%' OR tKlant.mOverig LIKE '%warmenhuizen%' OR tCommunicatie.sCommunicatie LIKE '%warmenhuizen%' OR tAdres.sStraat + ' ' + tAdres.sHuisnummer LIKE '%warmenhuizen%' OR tAdres.sPostcode LIKE '%warmenhuizen%' OR tAdres.sPlaats LIKE '%warmenhuizen%' OR tKlantGroep.sKlantGroep LIKE '%warmenhuizen%')
AND (tKlant.sAchternaam LIKE '%0226%' OR tKlant.sBedrijfsnaam LIKE '%0226%' OR tKlant.sKlant LIKE '%0226%' OR tKlant.sVoornaam LIKE '%0226%' OR tKlant.mOverig LIKE '%0226%' OR tCommunicatie.sCommunicatie LIKE '%0226%' OR tAdres.sStraat + ' ' + tAdres.sHuisnummer LIKE '%0226%' OR tAdres.sPostcode LIKE '%0226%' OR tAdres.sPlaats LIKE '%0226%' OR tKlantGroep.sKlantGroep LIKE '%0226%')
GROUP BY tKlant.nKlant, DATALENGTH(mOverig)
ORDER BY sAchternaam, sPlaats, sAdres;
KEYIDGROUP
1 1 a
2 1 b
3 2 a
4 2 b
5 3 a
6 3 b
7 4 a
8 5 a
This is my simple table I need a query that will identity the ID's that are missing the group "b" but I don't want ID 1,2,3 to come up because they are part of a and b. I just need to see anything missing only "b" but not if it's part of a and b.
query should reveal answer should be missing the group b
KEYID
7 4
8 5
I tried the NULL search but since the records don't exist it cant find a null. I am writing a query to identify the missing ID without B but exclude ID that are part of A and B
SQL Sever 2012, I have a table where I store data related with a Log, the columns of the table are three, IDTable, DateLog and CountLog, the column CountLog is a cumulative value, each new rows can increment this value, my query will receive two parameters related with the Date,  @dateFrom and @dateTo, with this information is necesary to get the diff between two months, for example:
CREATE TABLE MyTable
(
 IDTable INT IDENTITY NOT NULL,
 DateLog  DATE NOT NULL,
 CountLog INT NOT NULL
)
[code]....
In this case I need to apply a filter with the Dates:
@dateFrom ='2014-01-01',
@dateTo   ='2014-04-28'
But according with this filter I need to limit the results only for this period between the date, but I need that the first month (January 2014) take the information of the max value from previous month even not included in the filter, in this case the results will be the next:
Id     MonthYear    Diff
1 Â Â Â Â Â Â Jan2014 Â Â Â 5
2 Â Â Â Â Â Â Feb2014 Â Â Â 3
3 Â Â Â Â Â Â March2014 Â 0
4 Â Â Â Â Â Â April2014 Â Â Â 5
With the results, for the first mont (January) is, according to the range of times, January is the lower limit,the last cumulative value of CountLog before the first month of the range  was 2 (December 2013), the max value of the CountLog for this first month was 7, the diff is 7-2 equal to 5 , in the case of the next month (February) the max value of the CountLog was 10, the diff is 10 - 7 equal to 3 and this way. Â
[URL]
I have 2 TableAuthorsID Name1 Clint2 Voke
BooksBookID ID BookName Price1 1 Book1 10 2 1 Boo21 12 3 2 Book3 6 4 1 Book4 13 5 1 Book5 2
Now I want to List All Authors and only show Most Expensive book Name of each Author.So I need this Fields :ID,Name,BookName,BookID,Price.
How could I Write SQL query For It (I want to show results in DB Without Using SP).I want to Create NEw Views Which Shows my required Results.
thanks,
Hiya,
This is a fairly detailed problem, so this will be a long post... I do appologize. I have been agonizing over this now for over a week and cannot find a viable solution. Hopefully one of you can help.
First off, I work for a realestate company, and this query will display a list of properties based on a number of different criteria and criteria types. There are multiple tables involved:
dbo.Prop:
Property Database. Holds basic info about each property
dbo.Prop_Features:
holds all the features (such as Pool, Carpet, Drapes etc) for each property. The only information stored in this table are PropID and FeatureID (PropID being the Identity of the Prop table, FeatureID being the Identity of the Features Table)
dbo.Features
Holds information on each possable "feature" in the system.
dbo.Members
Holds basic information and criteria for each of our members.
dbo.Members_Features
This table holds the MemberID and FeatureID where members have chosen one ore more features to be used for criteria when searching for a property.
Ok, now... That said, here is my problem. The query I had written (by a professional hired thru Robert Half Technologies) takes over 30 seconds to execute. I will post a copy of that SP below. This is unacceptable. We have to process thousands of these per hour, and a 30 second process time is very bad. Can any of you give me a idea of how to better approach this problem?
In the code below, you will notice there are other tables I did not mention - they are not important. The Speed problem is surrounding a single function, which I will mention below.
CREATE PROCEDURE dbo.Member_Get_List
(
@MemberID Int,
@UpdatesOnly Bit
)
AS
Declare
@RentMin FLoat,
@RentMax Float,
@BedMin SmallInt,
@BedMax SmallInt,
@MinBaths Float,
@MinGarage Float,
@Acreage SmallInt,
@PropCount int,
@LastUpdate SmallDateTime
BEGIN
Select @Rentmin = Rentmin,
@RentMax = Rentmax,
@BedMin = BedMin,
@BedMax = BedMax,
@MinBaths = MinBaths,
@MinGarage = MinGarage,
@Acreage = Acreage,
@LastUpdate = LastUpdate
FROM
Members
WHERE
MemberID = @MemberID
END
BEGIN
SET @PropCount = (SELECT Count(*)
FROM Members_Features
WHERE MemberID = @MemberID )
END
IF @PropCount = 0
BEGIN
SELECT Top 100
P.PropID,
P.Bedrooms,
P.Baths,
P.Garage,
PT.PropName,
P.Rent,
P.Address,
P.Xstreets,
'DateAvailable' = CASE
WHEN DateDiff(Day, P.DateAvailable, GETDATE()) < 0 THEN 'NOW!'
ELSE CONVERT(varchar(10), P.DateAvailable, 101)
End,
P.Lease,
dbo.Prop_Get_Feature_List_Fun(P.PropID) + CASE Len(P.CustomFeatures)
WHEN 0 THEN ''
ELSE ', ' + P.CustomFeatures
End
+ CASE Len(P.Comments)
WHEN 0 THEN ''
ELSE ', ' + P.Comments
End
as 'Features',
P.Deposit,
Phone1 = SUBSTRING(L.Phone1, 1, 3) + '-' + SUBSTRING(L.Phone1, 4, 3) + '-' + SUBSTRING(L.Phone1, 7, 4),
A.AreaName,
Z.County,
Z.City,
Z.State
FROM Prop P
INNER JOIN Area_Zipcode AZ
ON P.Zip = AZ.Zipcode
INNER JOIN Area_Areas A
ON AZ.AreaID = A.AreaID
INNER JOIN Members_Areas MA
ON A.AreaID = MA.AreaID
INNER JOIN Members_PropTypes MP
ON P.PropType = MP.PropType
INNER JOIN Prop_Types PT
ON P.PropType = PT.PropType
INNER JOIN LandLords L
ON P.LandLordID = L.LandLordID
INNER JOIN ZipCode Z
ON P.ZIP = Z.ZipCode
WHERE
P.Active = 1
AND
P.Rent BETWEEN @RentMin AND @RentMax
AND
P.Bedrooms BETWEEN @BedMin AND @BedMax
AND
P.Baths >= @MinBaths
AND
P.Garage >= @MinGarage
AND
P.Acreage >= @Acreage
AND
MA.MemberID = @MemberID
AND
MP.MemberID = @MemberID
AND P.ListDate >
Case @UpdatesOnly
When 0 then '01/01/1900'
When 1 then @LastUpdate
End
END
ELSE
BEGIN
DECLARE @Flag int,
@FeatureID int,
@PropID int,
@Bedrooms tinyint,
@Baths float,
@Garage float,
@DisplayText varchar(75),
@Rent float,
@Address varchar(100),
@Xstreets varchar(100),
@DateAvailable varchar(10),
@Lease tinyint,
@Features Varchar(3500),
@Deposit float,
@Phone1 varchar(12),
@AreaName Varchar(50),
@County Varchar(30),
@City varchar(30),
@State varchar(75)
CREATE TABLE #Prop
(
PropID int,
Bedrooms tinyint,
Baths float,
Garage float,
DisplayText varchar(75),
Rent float,
Address varchar(100),
Xstreets varchar(100),
DateAvailable varchar(10),
Lease tinyint,
Features Varchar(3500),
Deposit float,
Phone1 varchar(12),
AreaName Varchar(50),
County Varchar(30),
City Varchar(30),
State Varchar(75)
)
DECLARE curProp Cursor FORWARD_ONLY for
SELECT Top 100
P.PropID,
P.Bedrooms,
P.Baths,
P.Garage,
PT.PropName,
P.Rent,
P.Address,
P.Xstreets,
'DateAvailable' = CASE
WHEN DateDiff(Day, P.DateAvailable, GETDATE()) < 0 THEN 'NOW!'
ELSE CONVERT(varchar(10),P.DateAvailable, 101)
End,
P.Lease,
dbo.Prop_Get_Feature_List_Fun(P.PropID) + CASE Len(P.CustomFeatures)
WHEN 0 THEN ''
ELSE ', ' + P.CustomFeatures
End
+ CASE Len(P.Comments)
WHEN 0 THEN ''
ELSE ', ' + P.Comments
End
AS 'Features',
P.Deposit,
Phone1 = SUBSTRING(L.Phone1, 1, 3) + '-' + SUBSTRING(L.Phone1, 4, 3) + '-' + SUBSTRING(L.Phone1, 7, 4),
A.AreaName,
Z.County,
Z.City,
Z.State
FROM Prop P
INNER JOIN Area_Zipcode AZ
ON P.Zip = AZ.Zipcode
INNER JOIN Area_Areas A
ON AZ.AreaID = A.AreaID
INNER JOIN Members_Areas MA
ON A.AreaID = MA.AreaID
INNER JOIN Members_PropTypes MP
ON P.PropType = MP.PropType
INNER JOIN Prop_Types PT
ON P.PropType = PT.PropType
INNER JOIN LandLords L
ON P.LandLordID = L.LandLordID
INNER JOIN ZipCode Z
ON P.ZIP = Z.ZipCode
WHERE
P.Active = 1
AND
P.Rent BETWEEN @RentMin AND @RentMax
AND
P.Bedrooms BETWEEN @BedMin AND @BedMax
AND
P.Baths >= @MinBaths
AND
P.Garage >= @MinGarage
AND
P.Acreage >= @Acreage
AND
MA.MemberID = @MemberID
AND
MP.MemberID = @MemberID
AND P.ListDate >
Case @UpdatesOnly
When 0 then '01/01/1900'
When 1 then @LastUpdate
End
OPEN curProp
FETCH NEXT
FROM curProp
INTO @PropID,
@Bedrooms,
@Baths,
@Garage,
@DisplayText,
@Rent,
@Address,
@Xstreets,
@DateAvailable,
@Lease,
@Features,
@Deposit,
@Phone1,
@AreaName,
@County,
@City,
@State
WHILE @@FETCH_STATUS = 0
BEGIN
SET @Flag = 1
-- print 'PropID = ' + convert(varchar(20),@propID)
DECLARE curMembers Cursor FORWARD_ONLY FOR
SELECT MF.FeatureID
FROM Members_Features as MF
INNER JOIN Members as M
ON MF.MemberID = M.MemberID
WHERE M.MemberID = @MemberID
OPEN curMembers
FETCH NEXT FROM curMembers into @FeatureID
WHILE @@FETCH_STATUS = 0
BEGIN
--print 'FeatureID = ' + convert(varchar(20),@FeatureID)
IF (EXISTS(
SELECT *
FROM Prop_Features
WHERE FeatureID = @FeatureID
AND PropID = @PropID))
FETCH NEXT FROM curMembers INTO @FeatureID
ELSE
BEGIN
SET @Flag = 0
BREAK
END
END -- While
CLOSE curMembers
DEALLOCATE curMembers
IF (@Flag = 1)
-- PRINT 'Success!!! PropID = ' + convert(varchar(20),@PropID)
--PRINT @PropID
INSERT INTO #Prop
VALUES (
@PropID,
@Bedrooms,
@Baths,
@Garage,
@DisplayText,
@Rent,
@Address,
@Xstreets,
@DateAvailable,
@Lease,
@Features,
@Deposit,
@Phone1,
@AreaName,
@County,
@City,
@State
)
FETCH NEXT
FROM curProp
INTO @PropID,
@Bedrooms,
@Baths,
@Garage,
@DisplayText,
@Rent,
@Address,
@Xstreets,
@DateAvailable,
@Lease,
@Features,
@Deposit,
@Phone1,
@AreaName,
@County,
@City,
@State
END -- While
CLOSE curProp
DEALLOCATE curProp
SELECT * FROM #Prop
DROP TABLE #Prop
END
Okey, now. Please notice this part of that code:
dbo.Prop_Get_Feature_List_Fun(P.PropID) + CASE Len(P.CustomFeatures)
WHEN 0 THEN ''
ELSE ', ' + P.CustomFeatures
End
+ CASE Len(P.Comments)
WHEN 0 THEN ''
ELSE ', ' + P.Comments
End
AS 'Features',
This function is the cause of the speed problem, methinks. When run alone, it takes 29 seconds to process with the same MemberID that takes about 33 seconds to process completely (the whole Proc). This function simply returns a list of comma delimited features for each property, for displaying on a customer list. Here is that function:
CREATE Function dbo.Prop_Get_Feature_List_Fun (@PropID int)
RETURNS Varchar(3500)
AS
BEGIN
Declare @FeatureList Varchar(3500)
select @FeatureList = Coalesce(@FeatureList + ', ', '' ) + F.FeatureName
FROM
Prop P
INNER JOIN
Prop_Features PF
ON
P.PropID = PF.PropID
INNER JOIN
Features F
ON
PF.FeatureID = F.FeatureID
WHERE
P.PropID = @PropID
ORDER BY
F.FeatureName
Set @FeatureList = isnull(@FeatureList,'Please call for features.')
RETURN @FeatureList
END
Now, I know I probably gave lots more information then needed to solve this issue - but its better to have too much then not enough.
Any help at all in speeding up this function or describing another way to do this would be most appreciative.
Dave
I graduated from college about three years ago and have been working as a programmer using MS SQL 2000 and even though I've learned a TON in these past three years I know there is tons more I can learn.
Because my company uses Microsoft SQL Server 2000 I'd like to focus on that, but anything ANSI-SQL is perfectly fine.
So... what are some good books on SQL query optimization and other advanced SQL topics?
Thanks in advance...
Im trying to transfer data from SQL tbl to .xls file through a DTS package.
My problem is that DTS transfers all the data from the source tbl to .xls
file.
But i would like to have the selective data transfer based on some query like ;
select * from tbl where field ='val'
instead of complete data transfer.
Thanks in advance.
Regards
Siva
Hi,
I am trying to load data from sql server to sybase. SQL Server is our source databse and I want to do this task in unix server using isql and bcp options.
I want to limit the changes on source tables and also I cannot use DTS or SSIS since we dont own SQL server.
Does any have any idea how to use query option in bcp. It is not direct table load. I need to run select statements with Joins in it.
Any ideas on how to script run and save results in to file and then bcp in to our sybase server.
I am not suposed to craete any views on source db. So just need to run sql statements and take the results to text file.
Im trying to transfer data from SQL tbl to .xls file through a DTS package.
My problem is that DTS transfers all the data from the source tbl to .xls
file.
But i would like to have the selective data transfer based on some query like ;
select * from tbl where field ='val'
for the val i want to pass different values .
instead of complete data transfer.
Thanks in advance.
Regards
Anand
My table have many column.........One for Message(column).My table updating every seconds......
But I need last Message.........
Ex
Message(Column) ..............
-------
firstmsg
nextmsg
middlemsg
jsjfsjmsg
jhsffmsg
lastmsg
In table i need lastmsg--- How to get
Hello,
I'm using sp_send_dbmail with query option. Is there a way to not have "1 rows returned" in the email?
Thanks!
Hi everyone In my SqlServer Management Studio Express, on start up it shows the server type option, but greyed.So that value is fixed to database engine. ( I'm trying to work on an SqlServer Compact Edition database through the SSMStudiothat's why I'm trying to get this to change.)Besides, after I connect i go to the Object Explorer, expand the server node, and go to Replication.When i expand replication, i get the "Local Subscription" option, but nothng for Publication.( I want to work on Merge Replication, that's why I desparately need Publication to work)Am i missing something here? I did not install SqlServer separately, I only have what comes bundled with the Visual Studio 2005 Setup.
View 2 Replies View RelatedIn TSQL, is there a way to 'Set' the query option results in text as the head of my sql statement?
kind of tired of hit contol+t to get the text result.
also, when I
print '@dateStart--' + cast(@dateStart as varchar(30))
I don't get seconds and I even need mis.
Is there a simple way instead of a combination of datepart() to get ss, mis?
thanks
David
Does anyone know how to diable the File => Connect option in Query Analyzer?
Thanks
Clarification:
The situation is that I have several users on an application that controls their access to the DB. The user ID has full rights to the DB but the application stops them from making changes to data. Now I have a user that needs to be able to create and run SELECT statements in a “Query Analyser” type of environment. I can publish a Query Analyser session with locked credentials using Citrix, but I don’t want him to be able to use the File => Connect option to reconnect with one of the application Ids thus giving him full rights in an open environment.
Any ideas?
Thanks
I just inherited a few Servers that have SQL Server 2000.
I cant find the new query Icon?
[URL]
I have a Managers table in my SQL DB and it has a ManagerID, MgrName and MgrPhoto field base...
I can code a form with a select button that displays a drop down with the managers in it as choices, but am a little confused as to how I would make the PHOTO (MgrPhoto) change to the corresponding ManagerID that is selected from that option drop down since the SELECT CODE in the form only queries the ManagerID / MgrName combo for the choice.. The photo is below that drop down box and how to make it change to whatever photo is assigned to the selected ManagerID / MgrName ?
Here is the form code with query :
<form enctype="multipart/form-data" action="updatemanagerphoto.php" method="POST">
<select name="ManagerID" id="manager" style="width:400px" class="form_textbox">
<?
$db_connect= mysql_connect($db_host, $db_username, $db_password);
mysql_select_db($db_name, $db_connect) || die(mysql_error());
$sql_query= "SELECT * FROM Managers ORDER BY MgrName ASC";
[code]....
i have result set from such query :
resultSetOptions = System.Data.SqlServerCe.ResultSetOptions.Scrollable | System.Data.SqlServerCe.ResultSetOptions.Updatable;
queryText =
SELECT agvb_id as ID
,agvb_cat_id as Category
,agv_brn_id as Brand
,agvb_brn_name as BrandName
,agv_brn_area as Area
,agv_brn_sku_qty as SkuQuantity
,agv_brn_qty as Quantity
,agv_orderliness as Orderliness
,agvb_importance as Importance
FROM AGENTS_VISITS_BRANDS
WHERE (AGENTS_VISITS_BRANDS.agvb_agv_id = @agv_id)
AND (AGENTS_VISITS_BRANDS.agvb_cat_id = @dad_id)
ORDER BY agvb_brn_name
if i open resultSet with such qury it looses its updatable option.
If i remove from where 1 param (no mater which) everything runs ok.
I want to turn on the query governor cost limit option for 20 minutes so that queries do not run longer than 20 minutes but I could not find any info as if this option would also not allow database backup job or other maintenance jobs to run more than 20 minutes. We have backups (Via RedGate) run over 3.5 hours and others like rebuild indexes and integrity checks even more than 3.5 hours....
SQL Server 2012 SP2-CU1
Windows 2008 R2
- When I disable "allow remote connections to this server" from server properties>connection page, I can still remotely connect to the server from SSMS...so what is the impact of enable/disabling it?
- what is the impact of changing the remote query timeout (on the same page) from default value?
Here's one for one of you SQL genuises out there. I really appreciate any help that I can get. There are several steps to this.Step 1:I have a database that holds timesheet records for users. These records are by week. I need a query that will return the username of the people that have entered 0 time for all of their timesheets in the database.Step 2:I need a query that will delete and timesheets that have 0 time entered after the last timesheet with time entered. If they entered time in week 3 but have 0 time for week 4 and 5 and then are withdrawn at week 5 I need to remove timesheets for week 4 and 5. Note, they could have entered 0 for week 2 as long as week three has time entered.Step 3: - THIS IS THE MONSTER-Since the timesheets are by week, I need to find the date that the last time was entered. The timesheet has a start-date then suntime, montime, tuetime, wedtime etc. Sunday would equal the week start-date. So, if time was last entered on Friday, the date that I'm looking for is the start-date + 5. My problem is, How do I go about doing this? I've been trying to do it all in a query to no avail.I really appreciate any assistance that anyone can offer.Thank you,Still learning........-Scott
View 4 Replies View RelatedHi
I'm new in Reporting Services and I have a task to solve. I wonder how to do it in Reporting Services.
For example I have few records:
ID
Year
Q1
Q2
Q3
Q4
1
2005
0
0
10
20
2
2006
20
20
35
35
3
2007
40
45
45
10 Now I create two parameters:
Q and Year
When I run this report I want to choose for example Year = 2006, and Q = 3
When I choose these values I need to calculate a field in report like this:
needed_sum = 0(Q1,year=2005) + 0(Q2,year=2005) + 10(Q3,year=2005) + 20(Q4,year=2005) + 20(Q1,year=2006) + 20(Q2,year=2006) + 35(Q3,year=2006)
I need to declare variables, like it is calculating on a section in other reports systems. Here I found only code for report where I can write some functions.
Anyway..
Did someone knows how to solve this problematic task??
Regards
Bashay
Hi, Using Visual Web Developer and SQL Express, (coding in Csharp) I want to add a
advanced search facility to my site. Problem is I do not know how to begin.
The website is a business directory and displays company names and services that they provide.
Here is where I am at....
So far I have made one query which allows users to search the database by "town" such as if they enter "London" in the text box, it returns the relevant records into a gridview.
Rather than have a seperate text box for each query, I want to provide an advanced search box option so users can define their search and query the database by various criterias, such as geography, sector, name, number of employees in companies etc.
I have seen compact advanced search boxes on many sites!.
Replies greatly appreciated.
prontonet
Hello.
I want to order a resultset from a table by two columns in another table. Here's how it looks:
[Books]
ID
Title
[linkBookAuthor]
BookID (Books.ID)
AuthorID (Authors.ID)
[Authors]
ID
Firstname
Lastname
AuthorOrder
As you can see it's a many to many relationship. Is there a way to order the books by Authors.Lastname (the first if there are several authors) with one query ? If not, what is the fastest way ? I don't need the names in the resultset so I only want to order the books by Authors.Lastname, not include Authors.Lastname.
Thanks for any help.