Let say i have a table A with the following 3 fields. 1)Date
2)Title 3)Status.
i need to insert into table B (also have the same 3 fields) from this
table A with the condition where Title is "Alarm" and Status is "ON".
This can be done by a simple "INSERT" query.
However, there's a case for table A in like below:
Date Title Status
------ ------ ----------
5/7/07 1:05:23am ALARM ON
5/7/07 1:05:24am ALARM ON
5/7/07 1:05:25am ALARM ACK
5/7/07 1:05:25am ALARM ON
Based on the table A above, i only need to insert from table A into
table B the first 2 ALARM(ON)s. The third ALARM(ON) which has the same
Date with ALARM(ACK) needs not to be inserted into table B.
How can i write a simple SQL query which can insert all ALARM(ON)s
which doesnt have same date with ALARM(ACK)?
OK, this one should be easy for you folks but my mind is drawing a blank. Can someone give me an example query to copy data from one table to another? Both tables already exist and both tables have the same table definition. tblA has data tblB is completely empty. I just want to copy from tblA into tblB.
I dont want to use the GUI, nor do I want to do a "Select * Into..."
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime declare @enddate as datetime declare @Line as Integer DECLARE @count INT
set @startdate = '2015-01-01' set @enddate = '2015-01-31'
On my site users can register using ASP Membership Create user Wizard control. I am also using the wizard control to design a simple question and answer form that logged in users have access to. it has 2 questions including a text box for Q1 and dropdown list for Q2. I have a table in my database called "Players" which has 3 Columns UserId Primary Key of type Unique Identifyer PlayerName Type String PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table. I am having problems getting this to work and keep getting exceptions. Be very helpful if somebody could check the code and advise where the problem is??
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e) { SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1"); MembershipUser myUser = Membership.GetUser(this.User.Identity.Name); Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue; DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString()); DataSource.Insert();
SET @QUERY = "INSERT INTO tblDocTable(FileName, FileType, ImportExportID, BuildingID, Document)
SELECT '"+@fName+"' AS FileName, '"+@fType+"' AS FileType, " + cast(@fID as nvarchar(18)) + " as ImportExportID, '"+@bID+"' AS BuildingID, * FROM OPENROWSET( BULK '" +@fPath+"' ,SINGLE_BLOB)
AS Document"
EXEC (@QUERY)
This puts some values including a pdf or .doc file into a table, tblDocTable.
Is it possible to change this so that I can get the values from a table rather than as parameters. The Query would be in the form of: insert into tblDocTable (a, b, c, d) select a,b,c,d from tblimportExport.
tblImportExport has the path for the document (DocPath) so I would subsitute that field, ie. DocPath, for the @fPath variable.
Otherwise I can see only doing a Fetch next from tblIportExport where I would put every field into a variable and then run this exec query on these. Thus looping thru every row in tblImportExport.
All, Using access 2003 frontend and sql server 2008 backend. I have an append query to insert 80000 from one table to an empty table. I get an error:
"Microsoft Office Access set 0 field(s) to Null due to a type conversion failure, and didn't add 36000 record(s) to the table due to key violations, 0 record(s) due to lock violations, and 0 record(s) due to validation rule violations."
I know this error normally comes if there are dups in a field that doesnt allow.
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--/////////////////////////// USE MyDatabase GO CREATE TABLE dbo.LabResults (SampleID int PRIMARY KEY NOT NULL, SampleName varchar(25) NOT NULL, AnalyteName varchar(25) NOT NULL, Concentration decimal(6.2) NULL) GO --Inserting data into a table INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration) VALUES (1, 'MW2', 'Acetone', 1.00) VALUES (2, 'MW2', 'Dichloroethene', 1.00) VALUES (3, 'MW2', 'Trichloroethene', 20.00) VALUES (4, 'MW2', 'Chloroform', 1.00) VALUES (5, 'MW2', 'Methylene Chloride', 1.00) VALUES (6, 'MW6S', 'Acetone', 1.00) VALUES (7, 'MW6S', 'Dichloroethene', 1.00) VALUES (8, 'MW6S', 'Trichloroethene', 1.00) VALUES (9, 'MW6S', 'Chloroform', 1.00) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00 VALUES (11, 'MW7', 'Acetone', 1.00) VALUES (12, 'MW7', 'Dichloroethene', 1.00) VALUES (13, 'MW7', 'Trichloroethene', 1.00) VALUES (14, 'MW7', 'Chloroform', 1.00) VALUES (15, 'MW7', 'Methylene Chloride', 1.00 VALUES (16, 'TripBlank', 'Acetone', 1.00) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00) VALUES (19, 'TripBlank', 'Chloroform', 0.76) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51) GO //////////Parse/////////// Msg 102, Level 15, State 1, Line 5 Incorrect syntax near '6.2'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'VALUES'. ////////////////Execute//////////////////// Msg 102, Level 15, State 1, Line 5 Incorrect syntax near '6.2'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'VALUES'.
I'm trying to insert data into a table from two tables into a single table along with a hard coded value.
insert into TABLE1 (THING,PERSONORGROUP,ACCESSRIGHTS) VALUES ((select SYSTEM_ID from TABLE2 where AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID =('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID =('USER2')),255)
I get the following-
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Is it possible to insert data into a table from a temporary table that is inner join? Can anyone share an example of a stored procedure that can do this? Thanks, xyz789
Hi, I am having 2 tables. One is main table and another is history table. Whenever I update the main table, I need to insert the all the main table data to History table, before updating the main table. Overall it is like storing the history of the table updation. How do i write a stored procedure for this? Anybody has done this before? Pls help me.
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
I had a function like below :Public Sub Getdata2(ByVal query, ByVal db, ByVal name) Dim selectSQL As StringDim con As SqlConnection Dim cmd As SqlCommand Dim reader As SqlDataReader Trycon = New SqlConnection("User ID=xxx;password=xxx;persist security info=True;Initial Catalog=database1;Data Source=xxx.xxx.xxx.xxx.xxx,xxxxx;") Dim username As String username = Request.QueryString("username") selectSQL = "SET DATEFORMAT DMY;Insert into table1(hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, username, DGP, Remarks, Sub_Code, caveat, consider, age) select hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, '" & username & "', DGP, Remarks, Sub_Code, caveat, consider, age from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 where " & querycmd = New SqlCommand(selectSQL, con) con.Open() reader = cmd.ExecuteReader() lbl.Text = selectSQLCatch ex As Exception lbl.Text = ex.Message Finally If (Not con Is Nothing) Then con.Close() con.Dispose() End If End Try End Sub '------------------------------------------------------------------------------------------------------------------------------------------------------------------------- May i know that how do i retrieve data from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 due to diffrent server, diffrent UID and Password
Hello, I have a table called #table1 which is populated as in the example below. I would like to write a selectinsert statement based on #table1 that populates #table2 like in the #table2 example. Note #table2 is a fixed table that follows the structure below.
Can any of you T-SQL gurus help me with my problem? Any help will be most appreciated. Thanks
Insert into #table1 select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null UNION all select '012345','2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03' UNION all select '012345','2008-04-21 00:00:00.000' , '01', '06', null, null, null UNION all select '012345','2008-04-22 00:00:00.000' , '01', '02', '05', '07', null UNION all select '012345','2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null UNION all select '987654','2008-04-22 00:00:00.000' , '01', '02', '05', '16', null UNION all select '987654','2008-04-23 00:00:00.000' , '03', '06', null, null, null
select * from #table1
--This is the table i would like to insert my data into CREATE TABLE #table2 --max of 5 orders in 1 day --it does not matter what date the date order was made the 1st date would appear in dateorder1 and so on... ( custID nvarchar(6), dateorder1 [datetime] NULL, order1_1 nvarchar(2), order1_2 nvarchar(2), order1_3 nvarchar(2), order1_4 nvarchar(2), order1_5 nvarchar(2), dateorder2 [datetime] NULL, order2_1 nvarchar(2), order2_2 nvarchar(2), order2_3 nvarchar(2), order2_4 nvarchar(2), order2_5 nvarchar(2), dateorder3 [datetime] NULL, order3_1 nvarchar(2), order3_2 nvarchar(2), order3_3 nvarchar(2), order3_4 nvarchar(2), order3_5 nvarchar(2), dateorder4 [datetime] NULL, order4_1 nvarchar(2), order4_2 nvarchar(2), order4_3 nvarchar(2), order4_4 nvarchar(2), order4_5 nvarchar(2), dateorder5 [datetime] NULL, order5_1 nvarchar(2), order5_2 nvarchar(2), order5_3 nvarchar(2), order5_4 nvarchar(2), order5_5 nvarchar(2) )
TABLE1 ID Roll Name Amount . . . . . . so on --------------------------------------- 1 2 Alex 500 2 5 Jones 600 3 2 Ales 400
and we have TABLE 2
ID Roll Name Amount . . . . . . . so on
In both the Tables ID Field is Identity Field and rest all the columns are identical in both the tables.I want to perform a query in such a way that SQL Should,
1) Remove all data from TABLE2 First 2) Select those records from TABLE1 where Roll = 2 3) Then, Insert the results to TABLE 2
So we should get the result similar to below:
ID Roll Name Amount . . . . . . . so on --------------------------------------- 1 2 Alex 500 3 2 Ales 400
I have two databases in SQL Server and they both have almost the same tables. I want to insert the data of a table from the first database into a table with the same name, but from the second database. How can i do this?
I have to tables like given below Landing table "A" (Data load will happen over here, No primary keys mentioned over here) table "B" .Now I want to move the data from A to B.I have made use of below query insert into B select * from A...Landing table "A" has huge no of records, MS SQL server is taking huge amount of time.any alternative way to make this insertion process faster?
Using Sql Server 2005 Express and Management Studio I need to create a SQL insert statement for the contents of a table (FullDocuments) so that I can run the query on another server with that same table schema (FullDocuments) and the contents will automatically be inserted into the new instance of the FullDocuments table.In Management Studio I have used "Script Table as" for the create table query. The second instance of FullDocuments has been created on the remote server. Now how do I generate an insert query for the contents of FullDocuments so that the contents can be moved/inserted to the new instance of the table?Thanks for any help provided.
i am do the following: insert into table_a ([field1a], [field2a], [field3a]) select field1b, field2b, field3b from tableb where datefield1b >= {variable datefield1} and datefield1b <= {variable datefield2} which is working. HOWEVER, i need to add/include 1 more record from tableb. My first inclination is to do a UPDATE to add that first record BUT i am wondering if there is a way to do a UNION to get that record? i need the next 1 RECORD that has a datefield1b value that is < {variable datefield1} so if my date range is 01/01/2007 thru 12/31/2007 i need to also include the previous 1 record from tableb that is < 01/01/2007. that date could be from 1 month to 24 months old. I don't want all those records because there could be a whole lot of them in there.
I cannot insert into my appointments table because the primary key and identity column, appt_id, cannot be added. What do I have to change in my SQL statement to add new records into this table? I'm using SQL Server 2000 BE with Access Data Project FE.tbl_appointment-------------------1. appt_id (pk) --- identity column, seed 25, increment 12. date_id3. time_start4. time_end5. appt_details6. lkp_emp_idPrivate Sub btnAddAppts_Click()On Error GoTo Err_btnAddAppts_ClickDim strsql As StringDoCmd.SetWarnings Falsestrsql = "INSERT INTO [tbl_appointments] (lkp_emp_id, date_id, time_start, time_end, appt_details) values ('" & txtLkpEmpID & "', '" & txtDateID & "', '" & txtStartTime & "', '" & txtEndTime & "', '" & txtApptDetails & "')"DoCmd.RunSQL strsqlDoCmd.SetWarnings TrueDoCmd.CloseExit_btnAddAppts_Click:Exit SubErr_btnAddAppts_Click:MsgBox Err.DescriptionResume Exit_btnAddAppts_ClickEnd Sub I did check through Access and through Enterprise Manager and it is setup correctly. So I returned all rows in enterprise manager to manually enter an appointment to the table. I get the same error when doing data-entry straight to the table. [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot update identity column 'appt_id'. It does not automatically populate the appt_id field the way it's supposed to. When I try to manually set a value in there, i get an error: "Cannot edit this cell."
Hi , i am working with .net and as backhand using mySql. i have done all configration to use the database drive, my problem is i want to insert a path of my xxx selected file from open dialog box. we all know very well that paht has back salesh like "c:data estfilename" that is cause of my problem when ever i insert a path into my table of mysql it accesses all put in different way like "catatestfilename". that is what i hope u understood what i want to know. any one who has some idea please mail me. i will thankfull for your's concern. bye keep thinking.
I am trying to do a select statement and input the result to a different table how can this be done in one step? Now I am just coping to excel and importing back in this is a real pain.
If I have 2 tables (Source and Destination) which have the same fields except the fields are not in same order, what is a practical way to insert all data from Source into Destination? I know that I can do insert with select but then I need to specify every single fields since the fields positions are different between Source and Destination.
SALAM SIR, CREATE TABLE Airlines_Master ( Aircode CHAR(2), Airlines_name VARCHAR(15)) THIS IS MADE A TABLE IN SQLSERVER 2000.BUT HOW CAN INSERT DATA INTO THIS TABLE?
I'm passing data into sql proc. then insert into two diffrent tables. The two table dont have 1:1 relations. I'm trying to come up with the best way to insert the values into these two table. Here is what I have-- any suggestion?
fyi. I will love the proc to check errors during the process
I wan t to insert into a tabla data from other tabla using a parameter, my question is. What is the better tool to make this? "Execute SQL Task" or extrat te data using "OLE DB Source" and then use "OLE DB Destination" to insert the data into the new table?
I have three tables and all three are linked. Looking for query so that I can get the desired result. Notes for Table_A and Table_B:
ROW Data are given in the variables to insert the Row data. If these Row data are already exist with the exactly same sequence in the row of table then don't need to INSERT data again.If these variable date doen't exist then need to add this row.
Notes for Table_C:
Seq_id_Table_A is a Seq_id of #table_A. Seq_id_Table_B is a Seq_id of #table_B.
--Table_A----------------------Variables for Table_A-------------------- Declare @table_A_Y char(4)='TRC' Declare @table_A_Y1 char(2)='1'
