Our current production DBs are on windows 2000 and SQL Server 2000.
We just installed SQL Server on new windows 2003 server.
We need to copy the DB on to this new server.
When I tried to register the new server, I am getting the error message as server does not exists or access denied.
Could some one please assist on this why I am getting this error and how to solve this.
Thanks
New to 2000, I used EM to register the SQL server and the name is in the format of Server nameSQL Server Name. In SQL Sever 7.0 I always had one name which is my preference. How do I do this. I also am having trouble using a ODBC connection and connecting to SQL Sever from EM from other computers. I am wondering if the problem is the name format?
View 3 Replies View RelatedI have a database that runs sql 7. Most of our workstations are running on a windows 98 platform, however, a few are running windows 2000. I am trying to set up a new sql registration in enterprise manager, but the connection is failing. All of the 98 machines are logging in with a sql user name, but I was told to log the 2000 machine as a NT server. If you can understand what my problem is, could you please advise me?
thanks :confused:
I have a client that is running SQL 2005 Standard edition and they purchased 10 more Cal's, do I have to enter new registration keys, and if so where do you enter them?
Thanks in advance.
Joe
Hi:
My pc is windows 2003 server and I have installed SQL SERVER 2005 EXPRESS.
From Management Studio I made a New Server Registration with Windows Authentication.
I can't run the new server, its icon appears with a white dot (instead of green when a server is running or red when the
server is stopped)
I go to server properties and click the "Test" button and I get the next message error:
Testing the registered server failed. Verify the server name, credentials, an database, an then click Test again.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server)
what could be wrong?
How can I run the server?
Thanks!
hi,
when we go for a new sql server registration, then there are two authentication modes i.e either through windows authentication or through sql server authentication.
May anyone please tell me the default password for the windows authentication mode for user "sa".
Thanks & Regards,
Sitangshu Roy
i need to know how can i register my SQL server with WEb based SQL server
i have the address MSSQL2.MINUTESUAE.COM now how can i register my SQL Server with them.
when i m going to conect with this server it register but after that Database not show it take to much time.
Hi
I'm attempting to register a new sql server through the enterprise manager and recieving the following error message: login incorrect, userid not found.
I'm using the sql server wizard to register and selecting the sql server login information as the authentication mode. The login name and password is a valid account on the Windows NT server when i view the domain information.
any responses appreciated
thanks
Todd Minifie
hi ,
i am trying to upgrade from sql 7 to sql 200 .. i am doing a new clean install using the copy database wizard.
both sql 7 and sql 2000 are on different server connected on the network.
the problem i am facing is that i am not able to see the sql 7 server under the source database.
i have tried doing a new registration on sql 7 .. it does not seem to show up.
i have tried using the ip address. does not work
could you tell me how i can register the sql 7 server so that it is visible to all the other servers on the network..
thanks,
ggupta
Hi Guys,
I was trying to register a new server. When I start the new ser. registration wizzard I've selected a pc with the MSDE installed and when I entered all the correct passwords it doesn't register. Both pc's are the domain administrators.
I tried with windows authent. too and still the same. To be onest I was playing with this for about 2 days ;(
Both PC's are runnoing windows xp pro. I did hoewer manage to connect to the MSDE on the windows 2000 server.
Any help is appreciated.
For years I've had a server registration using sql server auth set up...now it's failing...can't be found not suthed BS...
I can still see mu other boxes in sql mode, and otyhers in mixed, and I can still see my remote boxes in Ireland and Pennysylvania...we're in NJ..
The person next to me does the same thing, had to reboot, but was fine.
I get ice in the winter...
bizzare-o world.
Any ideas?
Never seen anything like it...
I do know that our tech group has been doing some pushes lately...but I checked my settings and they seem fine..but why would I be able to see everything else but this one instance?
This is bizzare stuff...
Be glad if someone could have a look and comment....
I'd really would like to understand this...
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=38969
Dear All,
i've sql server 2005 server in my system. and sql 2000 client is also there.
now my problem is i was unable to register my server in sql server 2000.
but i was able to work with query analyser.
is there any way to register 2005 server ?
thank you very much
Vinod
Even you learn 1%, Learn it with 100% confidence.
I want to register a new server,
I go to Server Management Studio -> Right Click Database Engine -> New -> Server registration
Make up a server name and save
Apears the "..sql server does not allow remote connections..."
I go to surface area configuration for services and connections, but it doenst have any components...
If you please help me...
Thanx
Best Regards
I am trying for the first time to learn what to do and how to use SQLServer. I am following instructions in Books on Line to make a New Server Registration. The instructions read as follows:
Connecting to Servers
The toolbar of the Registered Servers component has buttons for the Database Engine, Analysis Services, Reporting Services, SQL Server Mobile, and Integration Services. You can register any of these server types for convenient management. Try this exercise to register the AdventureWorks database.
To register the AdventureWorks database
On the Registered Servers toolbar, click Database Engine if necessary. (It may already be selected.)
Right-click Database Engine, point to New, and then click Server Registration. The New Server Registration dialog box opens.
In the Server name text box, type the name of your SQL Server instance.
In the Registered server name box, type AdventureWorks.
On the Connection Properties tab, in the Connect to database list, select AdventureWorks, and then click Save.
I did steps 1 and 2 --- no problem. At step 3, for server name I typed MARKSDESKTOPSQLEXPRESS
At step 4 I typed: Adventureworks
At step 5 I went to Connection Properties and at the "Connect to database drop down box there were 2 choices: <default> or <browse server> (not Adventureworks). If I click on browse server, The browse server for Database window pops up but Adventureworks is not listed there either.
I did a search on my C drive and there are lots of Adventureworks files present so I must have downloaded the database OK.
Does anyone know where I go from here to connect to the Adventureworks database so I can continue with this tutorial?
Please help. Thanks
Mark
Hi all.
I'm trying to connect with ADOCE 3.1 to a sdf file (SQLCE v 3.5).
I'm not able to open the connection because I think that sqlceoledb is non registered correctily or at all.
I read some post saying that it should be registered via regsvrce (for CE 5.0 in my case).
This tool is avilable in evC 4.0..I found, but I don't have it.
Is there any other way to achieve this or a place where to find the correct regsvrce(I found prevoius versions that don't work).
Where are informations stored in the registry (I mean which keys)
Below the code I use:
Dim cn as Object
Dim rs as Object
Set cn = CreateObject("ADOCE.Connection.3.1")
cn.Open "Provider=Microsoft.SQLSERVER.CE.OLEDB.3.5;Data Source=Flashdisk est est.sdf"
Set rs = CreateObject("ADOCE.Recordset.3.1")
rs.Open "SELECT * FROM TestTable",cn,3,3
...... Thanks for any help
I purchased a SQLServer 2005 Workgroup Edition....My IT guy installed, but not sure if registration went through...As it turns out, this expensive software is NOT the right thing for my computer needs...so I am wondering...
1. Can ANYONE tell me how to check if the product key registration went through and was rec'd by Microsoft?
2. Can anyone ALSO tell me how I might be able to unregister this product key if it did, so that I can return the product, which has NEVER been used!
I've been looking and looking for answers -and not finding any! Anyone?
When trying to register SQLExpress, I get to the registration page, enter all required information but keep getting error that my email must be entered. It is entered. It is a valid MS Passport ID. I would like to register. What can I do to get past this apparently invalid validation?
Many TIA, jim
I tried to Register the SQL Express. I received the Email to comfirmation and verification but I don't received Any Key!
Can some one help me?
Thanks
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 41 - Cannot open a Shared Memory connection to a remote SQL server) (Microsoft SQL Server, Error: 87)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=87&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
TITLE: Browse Server for Database
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
ABove is the error msg. Anybody any suggesstion. I'm newbie in SQL Server. This happen when i follow the tutorial for server registration at Server Management Studio.
'To register the AdventureWorks database'
I had enable all the protocol. I'm using win XP Sp2.
Am I able to register SQL2005 server in Enterprise Manager of SQL2000, or SQL2000 server in SQL Server Management Studio?
View 5 Replies View Relatedhi,
have a standalone machine with SQL Server 7 installed....service is up and running but am having trouble registering the server in the Enterprise Manager.....
error message:
A connection could not be established to MACHINENAME - Client unable to establish connection ConnectionOpen (CreateFile()).. Please verify SQL Server is running and check your SQL Server registration properties (by right-clicking on the MACHINENAME node) and try again
have tried both nt security and the sa account but always get same message
any ideas why?
thanks
Hi Listers,
I hv 'SQL 2k' working on W2k. Initially the server name was 'GENOMESQL2000'. Today I hv changed the server name(sp_dropserver 'genomesql2000') to 'genomesql2k' by using the command sp_addserver 'genomesql2k',local.
After that I hv stopped the service and restarted the server, the server name was changed to 'genomesql2k'.
When I went and saw the SQL Server Group in the Enterprise Manager still the old name 'genomesql2000' exists. I hv refreshed the server it is showing the old name.
Now I got a doubt that this name is different from the server name or it should match the servername with the 'select @@servername'.
Can anybody help me on this problem.
tks in advance,
Srinivasan.
Hello,
I'm not sure what the Admin installed on my Windows 98 computer; and he is on vacation. I tried registering a server, but I get the following error message:
SQL Server registration failed because of the connection failure. General network error. ConnetionOpen (connect()). I checked the utilities and the default network library is TCP/IP. Any suggestions?
Thanks,
Samantha
The log file shows the following:
10:55:00 Begin Setup
10:55:00 7.00.623
10:55:00 Mode=Normal
10:55:00 ModeType=NORMAL
10:55:01 ValueFTS returned: 1
10:55:01 ValuePID returned: 1
10:55:01 ValueLic returned: 1
10:55:01 GetDefinitionEx returned: 0, Extended: 0xf000000
10:55:01 System: Windows 98
10:55:01 SQL Server ProductType: Developer Edition [0x2]
10:55:01 Begin Action: SetupInitialize
10:55:01 End Action SetupInitialize
10:55:02 Fixed install: 0
10:55:02 Begin Action: CheckRequirements
10:55:02 Platform ID: 0xf0000
10:55:02 Version: 4.10.67766446
10:55:02 DCOM95 has been detected.
10:55:02 File Version - C:WINDOWSSYSTEMshdocvw.dll: 5.0.2919.6307
10:55:02 ComputerName: Samantha
10:55:02 User Name: Samantha
10:55:02 Domain: Samantha
10:55:02 OS Language: 0x409
10:55:02 End Action CheckRequirements
10:55:02 Begin Action: Detection
10:55:02 End Action Detection
10:55:02 Begin Action: ODBCLocked
10:55:02 C:WINDOWSTEMP\_ISTMP0.DIRodbcinst.exe -IsLocked -Silent 1 -SourceDir F:X86ODBC -LogFile C:WINDOWSsqlodbci.log
10:55:03 Process Exit Code: (0)
10:55:03 End Action ODBCLocked
10:55:03 This combination of Package and Operating System allows a client install only.
10:55:20 The Developer Edition server component cannot be installed on Windows 98 using this CD. Only client components will be available for installation.
10:55:20 Reading SoftwareMicrosoftWindowsCurrentVersionCommonFilesD ir ...
10:55:20 CommonFilesDir=C:Program FilesCommon Files
10:55:20 Windows Directory=C:WINDOWS10:55:20 Begin Action: ShowDialogs
10:55:20 Begin Action: DialogShowSdWelcome
10:55:21 End Action DialogShowSdWelcome
10:55:21 Begin Action: DialogShowSdLicense
10:55:23 End Action DialogShowSdLicense
10:55:23 Begin Action: DialogShowSdRegisterUserEx
10:55:24 End Action DialogShowSdRegisterUserEx
10:55:24 Begin Action: DialogShowCdKey
10:55:24 End Action DialogShowCdKey
10:55:24 Begin Action: DialogShowPID
10:55:24 End Action DialogShowPID
10:55:24 Begin Action: DialogShowSdSetupType
10:55:29 [SetupTypeSQL]
10:55:29 szDir=C:MSSQL7
10:55:29 Result=303
10:55:29 szDataDir=C:MSSQL7
10:55:29 End Action DialogShowSdSetupType
10:55:29 Begin Action: DialogShowSdComponentMult
10:55:29 basesys=0, baseinst=0,basedata=0
10:55:48 SQL program folder: C:MSSQL7
10:55:48 SQL data folder: C:MSSQL7
10:55:48 Windows system folder: C:WINDOWSSYSTEM10:55:48 Prog req: 46703, Data req: 0, Sys req: 58434
10:55:48 Prog avail: 2147155, Data avail: 2147155, Sys avail: 2147155
10:55:48 Prog req vs. avail, 105137, 2147155
10:55:48 Data req vs. avail, 0, 2147155
10:55:48 Sys req vs. avail, 58434, 2147155
10:55:48 DisplaySystemPreReq
10:55:48 [SQLComponentMult]
10:55:48 Component=
10:55:48 Result=1
10:55:48 End Action DialogShowSdComponentMult
10:55:48 Begin Action: DialogShowSdStartCopy
10:55:49 End Action DialogShowSdStartCopy
10:55:49 Begin Action: DlgCPLLicense
10:55:49 End Action DlgCPLLicense
10:55:49 End Action ShowDialogs
10:55:49 Begin Action ProcessBeforeDataMove:
10:55:49 DeinstallStart returned (C:MSSQL7): 0
10:55:49 End Action ProcessBeforeDataMove:
10:55:49 Begin Action ProcessComponentSelection:
10:55:49 End Action ProcessComponentSelection
10:55:49 Begin Action LogSelectedComponents:
10:55:49 MgtTool
10:55:49 MgtToolSEM
10:55:49 MgtToolSEMHTML
10:55:49 MgtToolSEMMSD98
10:55:49 MgtToolSEMMSD98SYS
10:55:49 MgtToolSEMMSD98Res
10:55:49 MgtToolSEMMSD98Hlp
10:55:49 MgtToolSEMHelp
10:55:49 MgtToolSEMSEMSys
10:55:49 MgtToolSEMRes1033
10:55:49 MgtToolSEMResIntl
10:55:49 MgtToolSEMMSD98RsI
10:55:49 MgtToolProfiler
10:55:49 MgtToolProfilerHelp
10:55:49 MgtToolProfilerRes1033
10:55:49 MgtToolProfilerResIntl
10:55:49 MgtToolQryanlz
10:55:49 MgtToolQryanlzHelp
10:55:49 MgtToolQryanlzRes1033
10:55:49 MgtToolQryanlzResIntl
10:55:49 MgtToolDTCCLi
10:55:49 MgtToolWzcnflct
10:55:49 MgtToolWzcnflctWzcnsys
10:55:49 MgtToolWzcnflctWzcnHlp
10:55:49 MgtToolUtilSys
10:55:49 MgtToolUtilBinn
10:55:49 Connect
10:55:49 ConnectConnSys
10:55:49 ConnectConn9x
10:55:49 ConnectConnNT
10:55:49 Books
10:55:49 BooksBookso
10:55:49 BooksBooksCD
10:55:49 DevTools
10:55:49 DevToolsHeaders and Libraries
10:55:49 DevToolsHeaders and LibrariesInclude
10:55:49 DevToolsHeaders and LibrariesLibx86
10:55:49 DevToolsHeaders and LibrariesLibAlpha
10:55:49 DevToolsHeaders and LibrariesESQLC
10:55:49 DevToolsMDAC SDK
10:55:49 DevToolsVDI
10:55:49 DevToolsVDIInc
10:55:49 DevToolsVDISamples
10:55:49 DevToolsDbg Int
10:55:49 DevToolsDbg IntDbg Int Common
10:55:49 DevToolsDbg IntEXE
10:55:49 Samples
10:55:49 SamplesADO
10:55:49 SamplesDBLIB
10:55:49 SamplesDTS
10:55:49 SamplesESQLC
10:55:49 SamplesMSDTC
10:55:49 SamplesODBC
10:55:49 SamplesODS
10:55:49 SamplesOLEAut
10:55:49 SamplesRepl
10:55:49 SamplesSQLDMO
10:55:49 SamplesSQLNS
10:55:49 Core
10:55:49 CoreSys
10:55:49 ODBC
10:55:49 OLEDB
10:55:49 Repostry
10:55:49 RepstSys
10:55:49 CoreMisc
10:55:49 Monarch
10:55:49 Jet
10:55:49 NetCore
10:55:49 NetExt
10:55:49 SFExt
10:55:49 ReplExt
10:55:49 Core1033
10:55:49 CoreIntl
10:55:49 CrMi1033
10:55:49 CrMiIntl
10:55:49 Monr1033
10:55:49 MonrIntl
10:55:49 SFEx1033
10:55:49 SFExIntl
10:55:49 RpEx1033
10:55:49 RpExIntl
10:55:49 SysCore
10:55:49 VOLEDB
10:55:49 VODBC
10:55:49 MiscCore
10:55:49 MCHlp
10:55:49 MC1033
10:55:49 MCIntl
10:55:49 CnctBinn
10:55:49 CrRepCom
10:55:49 {E07FDDC8-5A21-11d2-9DAD-00C04F79D434}
10:55:49 {E07FDDBE-5A21-11d2-9DAD-00C04F79D434}
10:55:49 {E07FDDC7-5A21-11d2-9DAD-00C04F79D434}
10:55:49 {E07FDDBF-5A21-11d2-9DAD-00C04F79D434}
10:55:49 End Action LogSelectedComponents
10:55:49 Begin Action MoveFileData:
10:56:31 End Action MoveFileData
10:56:31 Begin Action ProcessAfterDataMove:
10:56:31 DeinstallSetReference (C:MSSQL7sqlservr.exe) returned: 0
10:56:31 End Action ProcessAfterDataMove
10:56:31 Begin Action InstallPkgs:
10:56:31 Setup is installing Microsoft Data Access Components (MDAC) ...
10:56:31 F:x86Othermdac_typ.exe /q:a /c:"setup.exe /qtn"
10:56:59 Process Exit Code: (3010)
10:56:59 Setup is installing Microsoft Management Console (MMC) ...
10:56:59 F:x86Otherinstmmc.exe /Q
10:57:20 Process Exit Code: (0)
10:57:20 Setup is installing Microsoft Distributed Transaction Coordinator (MSDTC) ...
10:57:20 F:x86Otherdtcsetup.exe /q:a /r:n
10:57:22 Process Exit Code: (0)
10:57:22 Setup is installing HTML Help ...
10:57:24 HTML Help installer exit code: 0
10:57:24 End Action InstallPkgs
10:57:24 SetNewPath returned: 3010
10:57:24 Path successfully updated.
10:57:24 Begin Action SelfRegister
10:57:30 Return code: 0
10:57:30 End Action SelfRegister
10:57:30 Begin Action SetupRegistry:
10:57:30 End Action SetupRegistry
10:57:30 Begin Action PostSetupRegistry:
10:57:30 C:MSSQL7BINNdcomscm.exe /RegServer
10:57:30 Process Exit Code: (0)
10:57:30 C:PROGRA~1COMMON~1MICROS~1SQLDEB~1sqldbreg.exe -RegServer
10:57:30 Process Exit Code: (-2147312566) Error loading type library/DLL.
10:57:30 C:PROGRA~1COMMON~1MICROS~1DATABA~1WZCNFLCT.EXE /RegServer
10:57:30 Process Exit Code: (0)
10:57:30 End Action PostSetupRegistry
10:57:30 Begin Action SetupFolders:
10:57:31 Microsoft SQL Server 7.0 Folder refreshed.
10:57:31 End Action SetupFolders
10:57:31 Action CleanUpInstall:
10:57:31 Uninstall command: C:WINDOWSIsUninst.exe -fC:MSSQL7Uninst.isu -c"C:MSSQL7sqlsun.dll" -msql70.mif
10:57:31 SetTracking: {E07FDDA8-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDA9-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDAA-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDAB-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDAC-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDAD-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDAF-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDAE-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDB0-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDB1-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDB2-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDB3-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDB4-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDB5-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDB6-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDB7-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDB8-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDB9-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDBA-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDBB-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDBB-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDBD-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDBE-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDC8-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDC7-5A21-11d2-9DAD-00C04F79D434}
10:57:31 SetTracking: {E07FDDBF-5A21-11d2-9DAD-00C04F79D434}
10:57:31 Installation Succeeded
I recently just changed my server's IP address. Now I can't access my named server in the Enterprise Manager. I can get to the server using the (LOCAL) name but not the machine name. Any pointers on how to fix this problem? Thanks!
View 5 Replies View RelatedHi,
I had 50+ servers that are to be registered under 10 Groups.
My Sr.DBA dumped all registered servers from his registry to a shared location as with file name as Servers.reg.
I clicked this file and added to to the Registry.
But the problem is when I opened the Enterprise manager i could see only the group names but the servers are missing???
Some one please help me in this ... How can we add all the Servers to my registry.
Thanks
Bob....
One of my developers is trying to register a SQLServer server (Win 2000,
SQL 2000) using Enterprise Manager. He receives the message below;
A connection could not be established to sever_name.
Reason: "EXECUTE permission denied on objedt 'sp_MSSQLDMO80_version'.
His login is in an NT group and I added the login the way I've always
done. I even tried adding his login alone. No luck.
He can register other servers, just not this one. He can connect and
run queries on this server using Query Analyzer without issue.
I tried granting explicit execute rights to the sp but the error pops
up again but on a different sp this time.
This is not my server and is under the direct control of another dba
and IT group. I spoke with them and they were clueless about any
security setup/configuration that may have been done.
I'm clueless. If you have a clue please advise.
Thanks in advance.
I have 65 servers registered in SQL Server 7.0 that I can see in Enterprise Manager. When I load the desktop client for 2000 I lose all the registered servers, and I have to register them all again.
Is there any way to avoid this???
Hi.
I am about to write my registration confirmation tables.
Right now I have my registration form and table "Users"
that receives input from user registration.
I want to do email confirmation of a registered account.
I was thinking of doing this by creating a table "Verify"
that is set to 0 if not verified and 1 if the user verifies
his email address.
Then I started thinking about the original registration
information. If a user "doesn't" verify, then there is all
this dormant data in the "Users" database. So, maybe
it is better to write all the registration data to the "Verify"
table and then have SQL move that data to the "Users"
table upon verification? This sounds a bit sloppy to me...
is this how the email verification of data is done or, if
not, can somebody suggest a best practice?
I thank you.
I have installed Sql Server 2000 evaluation copy on Windows XP, which I use to monitor other sql server 2000 installations (on Windows 2000) through Enterprise manager version 8.
What has been noticed is that if you try and set up a backup job through enterprise manager you do not get the option to remove inactive transaction log entries (yes the database's use full recovery models). Also if you select the verify backup option, it is not included within the job.
This is the same if you try the above on the local instance. This is not a problem as you can use the server installations, but what I am wondering is:
1. Has anyone come across this before?
2. Is it sql server 2000 on XP?
3. Is it the evaluation copy that is causing the problem?
4. Is it none of the above but indeed a far more complex reason which will mess with my head?
As always your help / knowledge is very much appreciated.
Hi,
I have 3 SQL Servers running here. Here are their configurations:
SERVER 1:
OS: Windows 2000 SP 4
SQL: SQL Server 2000 SP 4
SERVER 2:
OS: Windows 2000 SP 4
SQL: SQL Server 2000 SP 4
SERVER 3:
OS: Windows XP Professionnal
SQL: SQL Server 2000 SP 3
Now, as you can see, SERVER 1 and SERVER 2 have identical configurations. Plus, both will accept Windows Authentication and SQL Authentication.
If I try to add a new Registration from SERVER 3 to SERVER 1, it works fine but from SERVER 3 to SERVER 2 it doesn't. I always get an error (SQL Server does not exist or access denied). But, using the exact same user name and password, a connection can be established from SERVER 1 to SERVER 2 and vice-versa. Only when trying to connect froms SERVER 3 to SERVER 2 fails.
Any ideas?
Thanks,
Skip.
hi:
recently i have intsalled sql server on my system . and tried to set the sql server authentication, but its giving me an error,all the time i.e not allowing me to register and it says, "not connected to the right server." or sql server is not found.
can any one help me out ASAP with this.that is show me how to register the sql server exactly and set the user name and password for the sql server.Thnaks.
Hi, I've just installed MSDE 2000 Release A on a Windows NT Server 4.0 w/SP6. I'm on a WinXP machine and I've installed the Enterprise Manager, and am trying to register a new server registration. However, I'm getting the error: Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection. I've made sure that both the client and server are using TCP/IP for the protocol list, and I've tried using the physical server's name and it's IP address to register, but keep getting the same error. Thanks for the help.
View 2 Replies View Related