I have a job which is scheduled to run once daily. The job is enabled and the schedule is also enabled. After the job runs (successfully), the schedule has its 'Enabled' flag reset (i.e. the 'Enabled' checkbox in the schedule properties has become unchecked) and so is not rescheduled.
I have other jobs configured in a similar way, but they are run and then rescheduled in the normal way without any problems.
Our backups by default go to a network location, but I'd like to modify our maintenance plans to backup to an alternative location if the primary location isn't available. I've setup two Backup Database Tasks where the second one runs only if the first one Fails, and if the second one runs (on first one's failure) it then sends a notification to me so I know this occurred.
The Plan is running as expected, when I simulate a bad path in the first Backup Task the second one runs and the notification is sent, but the Job shows failure. I'd like to show the job as Successful when this occurs since I'm handling the issue and notification within the Plan, but I'm unable to find out how. I've set FailParentOnFailure to False on the Plan and I've changed the MaximumErrorCount to 2 with the assumption that this would work, but neither didn't.
Also I'm running into this in both SQL 2008 and SQL 2012.
The problem is as follows. SQL Express 2008 R2, backup is made by the means of bat file and sp. Need to have a table that would hold columns like 'date_of_backup', 'duration', 'message' (the one that appears on 'messages' tab in the result area after backup completion/failure). This is an example of real message that I want to catch:
Server: Msg 911, Level 16, State 11, Line 1 Database 'not_existing_db' does not exist. Make sure that the name is entered correctly. Server: Msg 3013, Level 16, State 1, Line 1 BACKUP DATABASE is terminating abnormally.
I have performed several restores due to poor equipment(in the past where I used to work, now I have a brand new HP); this database has never crashed. I read an article in which the guy said a good DBA should be doing a test restore at least once a month. I see where that would be extremely important since i test my ups weekly, and my genset once a week, why not ensure that the data is good also.
I have designed a DTS Package and it can be run successfully from Enterprise Manager. However, when I schedule the DTS package to run as a job then it fails with an error message of "Error string: The system cannot find the file specified.".
Anyone any idea as to why the job cannot find the DTS package?
Can it be something to do with SQL Server 7 and 2000 tools as 2000 Client tools have recently been installed onto my PC and the package and job ran fine when I had designed everything in SQL Server 7.
I have one maintenance plan for full backup to run at midnight daily, but somehow it runs another one at 11:40PM which I don't have plan for it. I can see it happened twice by opening job history. They all use same maintenance plan.
The only difference, I can see is in the message, one is "The job succeeded. The job was invoked by Schedule 112(Daily Backup.subplan_1)", the one I did not expect has message "The job succeeded.
The job was invoked by user sa". How to find this job that invoked by user sa and delete it? Again I can only see one job for full backup , but I can see it happened twice from view job history.
I currently have a db setup to do full backups nightly with log backups scheduled to occur every two hours during the day. The plan was running fine until yesterday when I got the full backup and then one log, the next log file failed...the message I received is:
sqlmaint.exe failed [SQLSTATE 42000](Error 22029). The step failed
I am unable to find anything related to error 22029.
I have installed a default instance of SQL Server 2005 on a new server, added two databases so far, and I am trying to implement maintenance plans, created using the Maintenance Plan Wizard. Each of the maintenance plan jobs is failing with the following error:
Description: The package path referenced an object that cannot be found: "PackageStep 1.Disable". This occurs when an attempt is made to resolve a package path to an object that cannot be found. End Warning DTExec: Could not set PackageStep 1.Disable value to false. I installed SP2, and just installed hotfixes to bring the install up to 9.0.3054, consistent with my other instances, but this does not help. None of the other instances has trouble with maintenance plans.
I am getting a failure on the db backup job of one of my maintenanceplans. It is coming back with the generic error message of,"sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The stepfailed."I then checked the Database Maintenance Plan History page, but thisshows all the steps having run successfully. If I check the drives forthe actual backup files, they exist and look healthy too!There is plenty of space on the drives, so it is not that.I've checked the NT logs and all they say is,"SQL Server Scheduled Job 'DB Backup Job for DB Maintenance Plan 'DBMaintenance Plan for All User Databases''(0xC06E15E2A9E1414087BE19541D167861) - Status: Failed - Invoked on:2005-06-29 21:00:04 - Message: The job failed. The Job was invoked bySchedule 35 (Schedule 1). The last step to run was step 1 (Step 1). "Which doesn't give me any clues.Since the backups have actually run to success, I am going to take offthe option on the maintenance plan to "Verfiy the integrity of thebackup upon completion". Maybe it is this that is causing problems,rather than the backup?Anyone had anything similar?
W2k3SP2 running SQL2k5SP2 in mixed mode. Trying to run a daily maintenance plan with a domain admin service account [domainsqlsvc]. This account is having login failure when I try to run the maintenance job. Would like to figure out why this account cannot authenticate with SQL. I believe I have local login denied, but login as a svc and login as a batch job are both enabled in Domain Policy.
What am I missing?
TIA for your help!
-Nick
EDIT: Here is the error data.
Date 11/14/2007 9:36:16 AM Log SQL Server (Current - 11/14/2007 9:36:00 AM) Source Logon Message Login failed for user 'domainsqlsvc'. [CLIENT: <local machine>] Error:18456, Severity: 14, State: 16
hi. i'm trying to develop a report for a library to display a list of overdue books. i want it to display a list of books which are 15+ days over due. i thought i would use the DATEADD function, but it doesn't seem like it's working.
I have this in my where clause:
Code:
BookEvents.EventDate<DATEADD("d",-15,GETDATE())
Is this right? I think I'm supposed to have more books showing up. Thanks for any help!
I would like to know how I can indicate a NULL value in a report expression in SSRS / Report Designer.
I am trying to code :
IIF(Value_A = 0, <NULL>, Value_A)
It may look weird but I am trying to return NULL values when Value_A is 0 (zero), in the sample scenario above.
I have tried using the keyword "NULL", but it is highlighted as a syntax error, and suggested to use System.DBNull. I tried it and then it says that components of the System collection cannot be used in an expression, so I am left drawing blanks.
I hope someone can help me here. Here is some background.
As I was attempting to download SQL Express, the download dialog box timed out. When I x-ed out of the download, Windows XP Professional 2002 threw up an error message indicating that the dialog box was non-responsive, and I elected to close it.
I downloaded SQL again successfully, and installed with no errors. I then attempted to create a new db through Visual Web Developer. Instead of creating a database, Visual Studio returned an error saying that I did not allow for new database objects, and that I should change my permission settings. I could not figure out how to do this, so I uninstalled SQL Express.
After re-starting, I got the following message: €œYour SQL Server Installation is either corrupt or has been tampered with (could not open SQLEVN70.RLL). Please uninstall then re-run setup to correct this option.€?
I uninstalled MS SQL again from the Add/Delete Programs on my Control Panel. On re-start, I received the same error again. On my Programs list, MS SQL is not present, there are several MS SQL files in the path C:Program FilesMicrosoft SQL Server.
So I located the Visual Studio uninstall tool and attempted to run it. I received the same error: €œYour SQL Server Installation is either corrupt or has been tampered with (could not open SQLEVN70.RLL). Please uninstall then re-run setup to correct this option.€?
Any ideas on how to uninstall the files in my program files so I can load a clean copy of SQL?
I have a question that I hope someone can clear up for me. I have come across a number of different suggestions on DB maintenance, for example reindexing with the following script:
USE DatabaseName --Enter the name of the database you want to reindex
DECLARE @TableName varchar(255)
DECLARE TableCursor CURSOR FOR SELECT table_name FROM information_schema.tables WHERE table_type = 'base table'
OPEN TableCursor
FETCH NEXT FROM TableCursor INTO @TableName WHILE @@FETCH_STATUS = 0 BEGIN DBCC DBREINDEX(@TableName,' ',90) FETCH NEXT FROM TableCursor INTO @TableName END
CLOSE TableCursor
DEALLOCATE TableCursor
My question is, doesn't the maintenance plan have this functionality inherent in it when you create the maintenance jobs to reindex? Is there a benefit to scripting things out vs just using the maintenance plan wizard for this sort of thing and any of the items it covers? I came from an Oracle background where this was a no-brainer but I am a bit confused on the choices with SQL Server.
I got the following error message when the scheduled DTS run for copiying the records from one server to another server.Actually it has copied successfully,but still returned this error?!There is a similar job on a different server doing the same thing returns a success message properly.?!! Thanks for any help.
''...ding... DTSRun: Executing... DTSRun OnStart: Create Table request124 Step DTSRun OnError: Create Table request124 Step, Error = -2147217900 (80040E14) Error string: There is already an object named 'request124' in the database. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 2714 (A9A) Error string: There is already an object named 'request124' in the database. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: Create Table request124 Step DTSRun OnStart: Copy Data from Results to request124 Step DTSRun OnProgress: Copy Data from Results to request124 Step; 10 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 10 DTSRun OnFinish: Copy Data from Results to request124 Step DTSRun: Package execution complete. Process Exit Code 1. The step failed.''
I have a Job that runs a DTS package. This package in turns call several other packages. All individual packages run fines. When the main package is run manually it also runs fine. The jobs that calls the main package should be runnning for at least a couple of Hours maybe more and updtae several tables. It actually run nightly for only 20 minutes and doesn't update any tables. Yet it is in "successful"? Any thougts?
I used Query Analyser to De-tach a SQL 7 database and that worked fine. The database became 'invisible' in Enterprise Manager and the entry was removed from the sysdatabases in Master. The mdf and ldf file remain in the file system. However, when I ran the sp to Attach the database QA said successful but it does not show in Enterprise Manager or in sysdatabases in Master. I'm going to run through the procedure again and if problems I'll check the logs but has anyone else had difficulty with this. Also with attaching the db to a SQL2000 install I believe the logins on the SQL7 install are not brought over. In my case, the client is using trusted logins with their database application so their is probably not a lot to manually recreate on the SQL 2000 install but doees anyone have nay sample code/script that can give me an idea of what is required in the area of getting logins out of the Master of SQL7 and into SQL2000.
Hi All,I have a DTS package that runs calling a few stored procedures and anactiveX module. The package does some data cleanup and load. It takesan hour to complete. I have emails sent at the beginning and end ofthe package execution along with error notifications if any of thestep fails.The issue is that, the DTS runs successfully. I ran the package fromthe server and it completes. If I schedule it, it has been running forover a few months without any issues. One fine day hell broke looseand it started to give an attitude!!When the job is invoked automatically on the scheduled time, it runsthe package. Does what its supposed to do including sending out thefinal email. but is not finishing the job. The job says its stillexecuting but the final step has completed. I have tried logging thepackage, and it says completed the last step.. But the JOB Log hasn'twritten anything to the log file.. (Job Log is where I am logging thestep where I am calling the DTS).Has anyone have any idea what this issue is? I am at a dead end andhave no clue why this is happening. I am thinking of changing thewhole process but before that I want to try posting this.Any ideas, suggestions will be much appreciated. Please feel free tolet me know if there is any additional information you need in orderto troubleshoot this issue.Thanks in advance..Aravin.
I have a standard Login ASP.NET 2.0 control on a login Page, a LoginName and LoginStatus controls on the member's page. once the user login successfully I am redirecting the user to Member.aspx page. The following is my machine configuration
Windows XP Pro Service Pack2 IIS 5.1 SQL Server 2000 visual Studio 2005 DISABLE ANONMYOUS ACCESS IN IIS ENABLE WINDOWS AUTHENTICATION
I am Using form authentication, and I am getting following error "Your login attempt was not successful. Please try again".
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Untitled Page</title> </head> <body> <form id="form1" runat="server"> <div> You are back ........ <asp:LoginName ID="LoginName1" runat="server" /> <asp:LoginStatus ID="LoginStatus1" runat="server" LogoutAction="Redirect" LogoutPageUrl="~/Login.aspx" />
</div> </form> </body> </html>
Member.aspx.cs
using System; using System.Data; using System.Configuration; using System.Collections; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls;
public partial class Member : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { Response.Write("<br/>Page.User.Identity.Name: " + Page.User.Identity.Name); Response.Write("<br/>Page.User.Identity.IsAuthenticated: " + Page.User.Identity.IsAuthenticated); Response.Write("<br/>Page.User.Identity.AuthenticationType: " + Page.User.Identity.AuthenticationType);
Ok, here is the deal. In T-SQL, an error is handled depending on its severity. For example, a severity of 15 or less (or is it 10 or less? doesn't matter) will only raise a warning that can be caught through the message event. 16 or higher (or whatever) will cause an exception to be thrown on the .NET side, and 20 or higher causes the connection to be closed.So far so good.Now here's my issue: I have a stored procedure that does 2 queries (inside the same SP). Sometimes, the first query will succeed, while the second one will cause an error of severity 16. Again, in .NET that will throw an exception, making me unable to fetch the first resultset (which I require for logging purpose). If the error was, let say, severity 9, I could simply subscribe to the message event to get my error, yet still be able to get the first result set. But unfortunately life isn't perfect, and the error is indeed a severity 16.Anyone know of a way to be able to get the first result set, even if the second query (within the same SP) completly fails?
I'm running a pretty standard insert command on a button (myCommand.ExecuteNonQuery();) I have a few other methods that run, but I only want them to proceed if the above was inserted successfully, how would i check that?
After a successful transaction (after committing), I found that i sent wrong records of one the column (wrongly updated). How do I get back my initial stage? I mean, how do I get back all the previous results? Is there a way to retrieve my previous data which were before committing a transaction?
I've installed 2005 / RS on my testing server several times, no problem.
My production server throws an error when Reporting Services is installed. There are a few threads on this error:Microsoft SQL Server 2005 Reporting Services -- Error 29528. The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation. I've Googled several similar complaints which discuss any of: Ensure IIS default web site is set to "All Unassigned" Ip[/*]Delete the RS Web services pool and retry[/*]Install RS separately[/*] The first two do nothing for the problem. While installing RS separately doesn't generate an error, it also doesn't create the RS databases.
Can the databases be created separately after installation?
I run XP Professional on a home machine. I recently installed VB 2003 with MSDE. When I go to the server explorer window, right click to add a connection, the Data Link properties dialog box pops up as it should. I select the name of home server, indicate integrated security, and select a sample database such as model or master from the list. The test connection is successful and clicking OK causes the connection to appear in the Server Explorer window. Yet when I go to open the connection, there is no data. The folders for Tables, Stored Procedures and so forth appear but they are empty. I have another 2000 database that a friend sent me. If I try to indicate in the Data Link propetries dialog box that I would like to attach this database, I get the same symptom. Test connection successful, yet when I create and open this connection, the folders are empty. I am a newbie to ADO .NET and I am not sure where to begin. Can someone help?
I keep receiving the error message below when I try to connect to SQL Management Studio
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)"
I have tried all of the suggestions in Google, in the forum, etc with not success.
I have enabled the
Named Pipe protocol/ Shared Memory protocol
SQL Server browser is enables
I even tried changing the SQL Server 2005 Shared Surface Configuration with no success.
I did not have this problem until the day light saving time change. I know this may having nothing to do with it but I need some help pronto.
In the error log I have the following error
Could not connect because the maximum number of '2' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: <local machine>]
Error: 17809, Severity: 20, State: 1.
Not sure what to do or if the problems are related.
hello, I'm new to store procedure in slq 2000. I want to create a sproc in my sql 2000 sevrer,I have a table named "Supplier", now I want to return my identiy field value when I use insert into sql command (insert into "Supplier") successful. So how to create this store procedure ? much thanks
I wish to have a batch file exit with a return code of 3 if it fails. In the batch file I have the single command: Exit 3 On SQL Server the Process Exit Code of a successful command is set to 0.
Yet, when I run the job SQL Server says that it is successful.
Hi all, Im not really sure if this is a PHP or and SQL problem but here goes.
Im using MSSQL and have developed a webpage that enables users to run various PACKAGES manually, however I need to display if the package has been successfully run.
Is there a system table that logs package information or is there a PHP function that I can use.
Thanks
P.s I know there are some system tables with the information for jobs but I do not want to create a job for each package.
