SQL Search :: 2012 / How To Update The Results Into Select Query Table
Oct 28, 2015
I have  created a table(T1) from select query result, that Select query is parameterised. Now I need to update the select query table(T1) based on the result every time.
Below is my Query:
 ALTER PROCEDURE [dbo].[RPT_Cost_copy]
SELECT MEII.*, SIMM.U_SP2DC, UPPER(SIMM.U_C3C2) AS GRP3,sb.cost, PREV.Z1, PREV.Z3, SB.Z2, SB.Z4,SIMM.U_C3DC1 AS FAM
INTO T1
FROMÂ
(SELECT a.meu, a.mep2, SUM(a.mest) as excst        Â
FROM mei as A WHERE a.myar=@yr and a.mprd=@mth AND LTRIM(A.MCU) <> '' AND LTRIM(A.MRP2) <> '' Â Â Â
[code]....
View 2 Replies
ADVERTISEMENT
Apr 19, 2014
I have written this sample query to search a full-text indexed table and return the results. If the word occurs more than once I want it to return as a new record and the results show a short summary of the location. I was using 'like', but the full table scans were really slowing it down. Can performance be improved for the following (The results returned by my query are accurate)
Query
DECLARE @searchString nvarchar(255);
DECLARE @searchStringWild nvarchar(275);
SET @searchString = 'first';
SET @searchStringWild = UPPER('"' +@searchString+ '*"');
SELECT id, '...' + SUBSTRING(searchResults.MatchedCell, searchResults.StartPosition, searchResults.EndPosition - searchResults.StartPosition) + '...' as Result
[Code] ....
View 2 Replies
View Related
Jan 21, 2008
I am attempting to sort the results of a query executed against a table variable in descending order. The data is being inserted into the table variable as expected, however when I attempt to order the results in descending order, the results are incorrect. I have included the code as well as the result set.
DECLARE @tblCustomRange AS TABLE
(
RecordID INTEGER IDENTITY(1,1),
RangeMonth INTEGER,
RangeDay INTEGER
)
DECLARE @Month INTEGER
DECLARE @Day INTEGER
-- Initialize month and day variables.
SET @Month = 8
SET @Day = 11
-- Insert records into the table variable.
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,2)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,27)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (6,10)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (9,22)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (12,16)
-- Select everything from the table variable ordering the results by month, day in
-- descending order
SELECT * FROM @tblCustomRange
WHERE (RangeMonth < @Month) OR
(RangeMonth = @Month AND RangeDay <= @Day)
ORDER BY RangeMonth, RangeDay DESC
I am getting the following resultset:
RecordID RangeMonth RangeDay
----------- ----------- -----------
2 1 27
1 1 2
3 6 10
I am expecting the following resultset:
RecordID RangeMonth RangeDay
----------- ----------- -----------
3 6 10
2 1 27
1 1 2
View 1 Replies
View Related
Apr 6, 2008
Using SQL Server 2005 Express:
I'd like to know how to do a SELECT Query using the following tables:
Miles Table:
Date/Car/Miles/MilesTypeID
===============
(some date)/Ford/20/1
(some date)Ford/20/2
(some date)Chevy/30/1
(some date)Toyota/50/3
(some date)Ford/30/3
Miles Type Table
MilesTypeID/MilesType
=================
1/City
2/Highway
3/Off-Road
I'd like the results to be like this:
Date/Car/City Miles/Highway Miles/Off-Road Miles
=====================================
(date)-Ford-20-0-0
(date)-Chevy-0-20-0
(date)-Ford-20-0-0
(date)-Toyota-0-0-50
(date)-Ford-0-0-30
Anyone? Thanks in advance!
View 3 Replies
View Related
Jun 26, 2015
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
View 4 Replies
View Related
Jul 29, 2015
To avoid locking/blocking, or in transaction scope, we are trying make a common practice of writing coide for update commands in our all SPs based on primary key columns in where clause. I have a following scenario...
UPDATE [dbo].[TL_CST_Locker_Issuance] SET
[isActive] = 0
WHERE
LockerIssuanceId IN (SELECT LockerIssuanceId
[Code] ...
What is the better approach and should be followed to avoid locks and gain performance or best approach.
View 7 Replies
View Related
Apr 1, 2007
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies
View Related
Mar 25, 2015
I have a table that contains words that will be used to search another table where FullText index has been created on searchable columns. I'm basically trying to run something like this:
SELECT t1.col1, t2.col3
FROM tbl1 t1, tbl2 t2
WHERE CONTAINS (t1.col1, t2.col1)
I know this won't work but is there a way to join these two tables so the words (t2.col1) can be passed as search conditions? There is no common key on both tables so normal join won't work. I'm trying to find a way to pass the search words from one table to another.
View 0 Replies
View Related
Apr 3, 2014
I want to update one table with the value from variable using a set based approach.
so the line
>> select @List = coalesce(@list + ',','') + cast(id as varchar(10)) + cast(feetype as varchar(25))
works fine but I want to take @list and use it to update my customers table. here is the full code.
create table customers
(custid int, fee_history varchar(max))
insert into customers
(custid
, fee_history
[code]....
View 5 Replies
View Related
Jul 20, 2005
I need some help with a query. I have a table with inventory that Ineed to allow customer searches on. Based on their search criteria, apreference level is calculated; the higher the preference level, thehigher on the order on the search results.The hard part is when the results are supposed to be limited to amaximum number of stores and items. Let's say that they only want tosee 3 stores and a max of 5 items per store. What needs to bereturned is the 3 stores with the best Preference and the 5 best itemsat each store.Create Table Inventory( StoreId int, ItemId int, Preference int )
View 1 Replies
View Related
Aug 27, 2015
I have a table (ScriptTable) which holds a groupID Nvarchar(10) ,SQLStatement Nvarchar (150)
Table Fields =
GroupID SQLStatement
1234 Select CUSTNO, CUSTNAME,CUSTADDRESS from custtable where customerNo = 'AB123'
9876 Select CUSTNO, CUSTNAME,CUSTADDRESS from custtable where customerNo = 'XY*'
What I need is to take each select statement in turn and add the data into a temp table. I can use any method but it needs to be the most efficient. There can also be a varying number of select statements to run through each time my job is run.
View 6 Replies
View Related
Mar 3, 2015
I have a scenario,
We have equipment table which stores Equipment_ID,Code,Parent_Id etc..for each Equipment_ID there is a Parent_Id. The PK is Equipment_ID Now i want to select the Code for the Parent_Id which also sits in the same table. All the Parent_Id's also are Equipment_ID's.
Equipment table looks like :
Equipment_ID Code DescriptionTreeLevelParent_Id
6132 S2611aaa 4 6130
11165 V2546bbb 3 1022
15211 PF_EUccc 5 15192
39539 VP266ddd 4 35200
5696 KA273eee 3 3215
39307 VM2611fff 4 35163
39398 IK264ggg 4 35177
There is another table for Equipment_Tree which has got Equipment_Tree_ID,Parent_Id and Equipment_ID does not has the Code here.
Select query where i need to select the Code for all Parent_Id's.
View 8 Replies
View Related
Feb 8, 2008
Not sure if this is possible, but maybe. I have a table that contains a bunch of logs.
I'm doing something like SELECT * FROM LOGS. The primary key in this table is LogID.
I have another table that contains error messages. Each LogID could have multiple error messages associated with it. To get the error messages.
When I perform my first select query listed above, I would like one of the columns to be populated with ALL the error messages for that particular LogID (SELECT * FROM ERRORS WHERE LogID = MyLogID).
Any thoughts as to how I could accomplish such a daring feat?
View 9 Replies
View Related
Oct 22, 2014
I have the followinf select statement..
SELECT - 1 AS OrganisationID, '--Please Select--' AS OrganisationName
UNION ALL
SELECT OrganisationID, OrganisationName
FROM tblOrganisation
ORDER BY OrganisationName
Results
OrganisationID OrganisationName
22 Animal
15 Birds
-1 --Please Select--
40 Reptiles
36 Snakes
I want the results to be:
OrganisationID OrganisationName
-1 --Please Select--
22 Animal
15 Birds
40 Reptiles
36 Snakes
How can I update my SQL select statement to yield these results..
View 6 Replies
View Related
Jul 24, 2015
Update statement based on the results from this SELECT:
SELECT RELQ_REL_VERSION_NM,
RELQ_RELEASE_Q_ID,
RELQ_STATUS_CD,
RELSP_RELEASE_STEP_ID,
RELSP_STEP_TYPE_CD,
RELSP_STATUS_CD
FROM RELEASE_QUEUE WITH (NOLOCK)
[Code] ....
I need to update all records where theÂ
RELEASE_STEPS.RELSP_STATUS_CD = 'SKPD'TORELEASE_STEPS.RELSP_STATUS_CD = 'CMPS'
I imagine that the UPDATE statement will be something like:
UPDATE RELEASE_STEPS SET dbo.RELEASE_STEPS.RELSP_STATUS_CD = 'CMPS'
WHERE (
SELECT RELQ_REL_VERSION_NM,
RELQ_RELEASE_Q_ID,
RELQ_STATUS_CD,
RELSP_RELEASE_STEP_ID,
RELSP_STEP_TYPE_CD,
[Code] .....
View 4 Replies
View Related
Nov 25, 2014
I have a simple update statement (see example below) that when runs, I expect to see the number of records updated in the Results tab. This information shows up in the Messages tab; however, what is displayed in the Results tab is (No column name) 40. From where the 40 is being generated. I have tried restarting SSMS 2012, restarting my computer, turning NOCOUNT on and off.
"UPDATE TableA
SET Supervisor = 'A123'
WHERE PersonnelNumber = 'B456'"
View 4 Replies
View Related
Feb 27, 2015
I am doing a web app on the full text search.My select statement using CONTAINS but it doesn't seem to return all the string that contains the search word I included in the query.For example:
Select CustomerID, customername,
from CustomerTable
where CONTAINS ((CustomerID), '"430*")
the query result only return all customer id which has space in front 430 or start with 430
ex: "xxx 430xxx" or "430 xxx" or "xxx 430 xxx"
but did not return customerID which doesn't has space in front of it
Ex: x430xxx
If I use LIKE '%430%', the result return are both have space in front and don't have space in front.
View 1 Replies
View Related
Sep 6, 2006
Hi, not exactly too sure if this can be done but I have a need to run a query which will return a list of values from 1 column. Then I need to iterate this list to produce the resultset for return.
This is implemented as a stored procedure
declare @OwnerIdent varchar(7)
set @OwnerIdent='A12345B'
SELECT table1.val1 FROM table1 INNER JOIN table2
ON table1. Ident = table2.Ident
WHERE table2.Ident = @OwnerIdent
'Now for each result of the above I need to run the below query
SELECT Clients.Name , Clients.Address1 ,
Clients.BPhone, Clients.email
FROM Clients INNER JOIN Growers ON Clients.ClientKey = Growers.ClientKey
WHERE Growers.PIN = @newpin)
'@newpin being the result from first query
Any help appreciated
View 4 Replies
View Related
Jul 31, 2014
I need to write a select statement that take the upper table and select the lower table.
View 3 Replies
View Related
Jul 10, 2015
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
View 6 Replies
View Related
May 28, 2015
I have this table:
with actividades_secundarias as (
select a.*, r.Antigo, r.Novo, rn = row_number()
over (PARTITION BY a.nif_antigo, r.novo ORDER BY a.nif_antigo)
from ACT_SECUNDARIAS a inner join
((select
[Code] ....
I want to make a delete statement like this:
select * into #table1 from actvidades_secundarias where rn>1
Delete from act_secundarias where act_secundarias.nif_antigo = #table1.nif_antigo and act_secundarias.cod_cae = #table1.cod_cae
But it seems that I cant delete like this.
View 5 Replies
View Related
Nov 1, 2015
I am using Sql Server 2014 Express edition.I have a table with a varchar(max) column. I have created a full text search that use the stoplist "system". column has this struct: xxx.yyy.zzz.... where xxx, yyy, zzz... are numbers, like 123.345.123123.366456...I can have rows like that:
123.345
123.345
123.345.444
123.345.555
123.345.666
123.345.444.777
123.345.444.888
123.345.555.999
I am trying this query:
select * from Mytable where
contains(MyColumn, '123.345.')
I gues the contains would return all the rows with column contains 123.345, but this does not return all the expected rows, only one row.I have tried to replace "." with "-" but the result is the same.I have also tried with '123.345.*. In this case I have got more results, but no all the exptected rows.If I use this query:
select * from MyTable where
MyCOlumn like '123.345.%';
View 12 Replies
View Related
Mar 13, 2014
Previous to 2012, grid results from SSMS queries pasted into Excel beautifully and were easy to format.in 2008, The results from this query pasted into a spreadsheet with the query contained in a single Excel cell:
(sample - not the whole script)
select top 300
Avg_CPU_Time
,Total_Physical_Reads
,convert(datetime,Last_execution_time) as Timestamp
,Stored_Procedure
,Query_text
from dbadmin.dbo.History_CPU_IO_ByQueryAndSP
This was wonderful. I could deliver to developers wonderfully tidy reports on query resource usage with timestamps along with which stored procedure the queries came from.
Can't do that in SSMS 2012. Try it. It's a disaster. The Query_text, when pasted, spreads across multiple Excel columns, including the ones designated for other data. The result is totally unreadable.how to make the query_text stay in it's own cell? I've tried converting query_text to varchar and ntext. Same results.
View 9 Replies
View Related
Jun 15, 2015
I have to use a Group By in Sub query that will give me my desired results.
SELECT count(hc), CS, S_W, (SELECT COUNT(Reg_Temp)
FROM CS_S
WHERE Reg_Temp = "Reg") as [RegOnly]
FROM CS_S
GROUP BY S_W, CS
ORDER By CS, S_W
The query I have above counts ALL the Reg, I'd want it to give only the count that I'd get by using Group By clause i.e. S_W and CS.
View 8 Replies
View Related
Jul 9, 2015
I am getting a tab character at the end of my query fields, been trying various things to fix, such as using the replace function below but still i get the tabs!
select CAST(REPLACE(NAMEALIAS,CHAR(9),'')AS CHAR(40)) + ',' as PRODNAME,
CAST(REPLACE(ISNULL(GLOBALTRADEITEMNUMBER,0),CHAR(9),'')AS CHAR(18))as EANNO,LTRIM(cast(ISNULL(GLOBALTRADEITEMNUMBER,0) as char(18))) as KONSEAN
,LTRIM(CAST(I.ITEMID AS CHAR(8))) AS PRODCODE,'00' from INVENTTABLE I
LEFT JOIN INVENTITEMGROUPITEM IG ON I.ITEMID = IG.ITEMID
[Code] ....
Results:
Gießanzeiger groß ,04260376730475 04260376730475 730475 00
Gießanzeiger klein , 04260376730352 04260376730352 730468 00
Gießanzeiger klein , 04260376730468 04260376730468 730468 00
View 9 Replies
View Related
Nov 7, 2007
my question is what all can i bind my results of a select query to.i know we can use Dataset and Sqldatareader. can we use something else like hashtables. for example we can have:reader = cmd.ExecuteReader(); can we have something likeHashtable = cmd.ExecuteReader();
View 5 Replies
View Related
Apr 6, 2007
Dear friends, can anyone please guide me on how to update table with results from derived column tool?
thanks,
View 9 Replies
View Related
Mar 3, 2014
I work for a school district and new requirement we were just given for scoring some student scores.
Everything will currently be in one table to keep track of students test scores for various things. This table will contain students information and a student will be shown more than once in the table. The Student ID is what we will key off of to find the multiple instances of the student. The table contains the following columns: studentName, StudentId, teacherName, focus1, controllingIdeas1, reading1, development1, organization1, conventions1, and contentUnderstanding1. All of the columns with a 1 at the end will be numeric values with possible decimal values.
What we need to be able to do is some how perform a search for these multiple entries of each student and when found, average the 2 scores for each 7 test categories. The result needs to be a single line for each student that gives the student name, student id, and the 7 test category averages exported to an csv file.
View 9 Replies
View Related
Jul 16, 2014
What is the best way to send emails with query results as attachment?
There is a stored proc sp_send_dbmail but the formatting is not very good.
View 3 Replies
View Related
Mar 20, 2015
I am trying to write a query that gives me the personal records from speed skaters on e.g. the 500 mtrs. I do this with the query:
SELECT cdsDistance AS Distance
, prsFirstName
, prsLastName
, min(crtFinalTime) AS MinTime
FROM tb....... INNER JOIN etc..
GROUP BY cdsDistance, prsFirstName, prsLastName
ORDER BY min(crtFinalTime)
In itself this works fine. However, there are complicating factors. Sometimes a speed skater has multiple PRs, meaning the he/she has the same fastest time more than once.
If these times are achieved on multple days, the 1st date is the official PR. (meaning: "Min of racedate")
If they are raced on the same day the 1st race is the PR (meaning: "Min of distancenumber")
Changing the code to:
SELECT cdsDistance AS Distance
, prsFirstName
, prsLastName
, MIN(crtFinalTime) AS MinTime
, MIN(cdsStartDate) AS RaceDate
, MIN(cdsDistanceNumber) AS DistanceNumber
FROM tb.......
GROUP BY cdsDistance, prsFirstName, prsLastName
ORDER BY min(crtFinalTime)
This gives me the wrong outcome because it gives me the "MIN" of every field, and they are not necessarily on the same row.
An option would be to calculate min(crtFinalTime), if for a person there is more than 1 result, calculate min of date, and then (if there is still more than 1 row) min of distancenumber.
Seems complicated, and I have the feeling there must be a better way (apart from: how to get this code)
Stacking subqueries in the FROM statement seems like a option be costly (time wise). There are more than 10 million rows (and growing) to run through.
As an example a few times:
DistanceFirst nameLast name Time Date Distance nr.
500 Yuya Oikawa 34.49 201311155
500 Yuya Oikawa 34.49 201311153
500 Yuya Oikawa 34.49 201311172
Yuya has 3 best times (34.49), 15-11-2013 is the 1st date, then distance nr 3 is the 1st distance raced. Therefore the 2nd row is the only row I would like to get in my endresult.
View 4 Replies
View Related
Jul 13, 2004
Hi,
I think I'm just braindead or simply thick...since this shouldn't be that hard, but I'm stumped right now.
So, I'm trying to retrieve from a table, with a sql stored procedure with the sql like
"select height, width, depth from products where id=@idinput"
OK, so this part is easy, but if I wanted to say, return this to my code and assign height to a variable Ht, width to Wd and depth to Dp, how could I do that?
This is what I've got so far...
[code]
cmdSelect = New SqlCommand( "GetProd", connstr )
cmdSelect.CommandType = CommandType.StoredProcedure
dbcon.Open()
dbcon.Close()
[/code]
The main prob is just what to connect this record to in order to access the individual fields.
Thx :)
View 2 Replies
View Related
Jun 19, 2001
Hello,
In the query analyser, I execute a select ' restore database ' + name + ' from disk = " D:sql7dumpackup ' + name + '' + Name + ' _du_21.bak " with move ' ' + name + ' _Données " to " e:sqlbasesasesdata ' + name ' _données.mdf ", move ' ' + name + ' _Journal " to " d:sqllogs ' + name + ' _journal.ldf ", replace From sysdatabases
And some lines are truncated in results ?.
how to avoid that.
View 3 Replies
View Related
Jul 12, 2014
I have a Managers table in my SQL DB and it has a ManagerID, MgrName and MgrPhoto field base...
I can code a form with a select button that displays a drop down with the managers in it as choices, but am a little confused as to how I would make the PHOTO (MgrPhoto) change to the corresponding ManagerID that is selected from that option drop down since the SELECT CODE in the form only queries the ManagerID / MgrName combo for the choice.. The photo is below that drop down box and how to make it change to whatever photo is assigned to the selected ManagerID / MgrName ?
Here is the form code with query :
<form enctype="multipart/form-data" action="updatemanagerphoto.php" method="POST">
<select name="ManagerID" id="manager" style="width:400px" class="form_textbox">
<?
$db_connect= mysql_connect($db_host, $db_username, $db_password);
mysql_select_db($db_name, $db_connect) || die(mysql_error());
$sql_query= "SELECT * FROM Managers ORDER BY MgrName ASC";
[code]....
View 2 Replies
View Related
