I have a table 'table_list' which contains two columns, table_name and a record_count. This table stores a list of tables and their corresponding record counts.
What I am trying to do is, to be able to write a select statement, that can read each table name in the 'table_name' column, execute a select count(*) for the same, and update its record_count with the result of select count(*).
This is the code in my procedure..
DECLARE @tab_list CURSOR set @tab_list = CURSOR FOR select * from table_list OPEN @tab_list
DECLARE @tab_name varchar(256) DECLARE @rec_cnt int FETCH NEXT FROM @tab_list INTO @tab_name, @rec_cnt
select count(*) from @tab_name
This select is looping around along with FETCH till all the table names are exhausted and their counts are updated from the cursor back into the table.
Problem is that, I am not able to use select count(*) from @tab_name, and its not accepting a variable there.
Please help me to construct the select statement that is similiar to
x=<table name> select * from x where x is a variable and the table name gets substituted.
I basically want to select all GRNID's from one table but they have to be between dates in another table.So I want all GRN's between two dates found in the ABSPeriodEndDate table. To find out the start date for the between clause I need to find the MAX Period then minus 1 and the max year. To find the end date of the between clause I want I need to find both the max period and year. But I want the DateStamp column to return the results for the between clause. My query is below:
SELECT tblGRNItem.GRNID FROM tblGRNItem INNER JOIN ABSPeriodEndDates ON tblGRNItem.DateCreated = ABSPeriodEndDates.DateStamp WHERE tblGRNItem.DateCreated BETWEEN (SELECT ABSPeriodEndDates.DateStamp FROM ABSPeriodEndDates WHERE ABSPeriodEndDates.DateStamp = (SELECT
select * from TABLE where user='jacky' ,it can working,but if like this: dim name as string="jacky" select * from TABLE where user=name it won't doing,Can a variable used in SQL select command,if can,how to make it working.
Hi I am ramesh here from go-events.com I am using sql mail to send out emails to my mailing list
I have difficulty combining a select statement with a where clause stored in a variable inside a cursor
The users select the mail content and frequency of delivery and i deliver the mail
I use lots of queries and a stored procedure to retrieve thier preferences. In the end i use a cursor to send out mails to each of them.
Because my query is dynamic, the where clause of my select statement is stored in a variable. I have the following code that does not work
For example
DECLARE overdue3 CURSOR LOCAL FORWARD_ONLY FOR SELECT DISTINCT Events.E_Name, Events.E_SDate, Events.E_City, Events.E_ID FROM Events, IndustryEvents + @sqlquery2 OPEN overdue3
I get an error message at the '+' sign which says, cannot use empty object or column names, use a single space if necessary
How do I combine the select statement with the where clause?
I am writing a stored procedure and have a query where I create a variable from other table
Declare @Sem varchar (12) Null @Decision varchar(1) Null Select emplid,name, Semester Decision1=(select * from tbldecision where reader=1) Decision2=(select * from tbldecision where reader=2) Where Semester=@Sem And Decision1=@Decision
But I am getting error for Decision1 , Decision2. How can I do that.
i am using a OLE DB Source in my dataflow component and want to select rows from the source based on the Name I enter during execution time. I have created two variables,
enterName - String packageLevel (will store the name I enter)
myVar - String packageLevel. (to store the query)
I am assigning this query to the myVar variable, "Select * from db.Users where (UsrName = " + @[User::enterName] + " )"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, enterName,. I select that and when I click on OK am getting this error.
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
myVar variable, i have set the ExecuteAsExpression Property to true too.
I want to have a FromDateTextBox and a ToDateTextBox where the user can enter in dates (most likely in mm/dd/yy format, although intelligently handing other formats might be a plus). Then I want to use these dates as the basis for a WHERE clause like:<some sql...> WHERE start_date BETWEEN 'FromDateTextBox.Text' AND 'ToDateTextBox.Text' (Note this WHERE clause will be used as the basis for an SqlDataSource FilterExpression). 1. I believe the date strings need to be in the format 'yyyy-mm-dd' to search SQL server is this correct?2. What's a decent way to convert the strings from the textboxes to the required format?3. How can I avoid an SQL injection attack?
hi im trying to code a login page using asp.net, vb.net. i have 2 web-controlled textboxes whose values i want to compare to userID and password stored on a SQL server database called users. When button clicked, call function checklogin.
heres the code:
Private Sub btn_login_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btn_login.Click
If Page.IsValid Then
Dim usersDS As New System.Data.DataSet
usersDS = checklogin(userID.Text, password.Text)
If usersDS.Tables(0).Rows.Count = 1 Then FormsAuthentication.RedirectFromLoginPage(userID.Text, False) Else error_log.Text = "Invalid Credentials: Please try again" End If End If
End Sub
Function checklogin(ByVal userID As Char, ByVal password As Char) As System.Data.DataSet
Dim connectionString As String Dim dbConnection As New SqlConnection Dim dbCommand As New SqlCommand Dim dataAdapter As New SqlDataAdapter Dim ds As New DataSet
With dbCommand .Connection = dbConnection .CommandText = "SELECT COUNT (*)Â?@AS pass FROM tbl_users WHERE ((tbl_users.userId = @userId) AND (tbl_users.password = @password))" End With
dataAdapter.SelectCommand = dbCommand
dataAdapter.Fill(ds)
Return ds
End Function
Heres the error i get:
Details of exception: System.Data.SqlClient.SqlException: There is a syntax invalid near line {''1
Source error:
Line 75:. CommandText = "declare@userID As varChar; declare @password As varChar; End With .."Line 76:.. line 77:of SELECT COUNT(*) AS pass FROM tbl_users WHERE((tbl_users.userId=@userId)AND(tbl_users.password=@password)) Line 78: DataAdapter.SelectCommand=dbCommand Line 79: DataAdapter.Fill(ds)
ive just started using .net, im a lil lost...thanks for any help. cheers
i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString() test.InsertCommandType = SqlDataSourceCommandType.Text test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) " test.InsertParameters.Add("roll", TextBox1.Text) test.InsertParameters.Add("name", TextBox2.Text) test.InsertParameters.Add("age", TextBox3.Text) test.InsertParameters.Add("email", TextBox4.Text) test.Insert() i am using UPDATE command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString() test.UpdateCommandType = SqlDataSourceCommandType.Text test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll 123 " test.Update()but i have to use the SELECT command like this which is completely different from INSERT and UPDATE commands Dim tblData As New Data.DataTable() Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn) Dim da As New Data.SqlClient.SqlDataAdapter(Command) da.Fill(tblData) conn.Close() TextBox4.Text = tblData.Rows(1).Item("name").ToString() TextBox5.Text = tblData.Rows(1).Item("age").ToString() TextBox6.Text = tblData.Rows(1).Item("email").ToString() for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me
I have two charts which are based on their own separate datasets. One chart shows data aggregated by MONTH, the other chart shows data aggregated by WEEK. I have put both of these charts inside a rectangle and set their visibility based on whether or not there is data returned by their respective datasets. This part is working just fine.
However, I have added a tablix to the report, deleted all columns and rows leaving only one remaining row/column so it looks like a textbox. This tablix is sitting on top of the two charts. The problem i'm having is that when both charts return no data and they do not show up in the report, the tablix still remains visible. I need to set the visibility but based on a condition between the two different datasets behind each chart.
Here's what I need: If ONE of the charts returns data, then I need the tablix to be visible. If neither chart returns data, then I need the tablix to be invisible. I'm trying to write an IIF statement comparing the two datasets but I get inscope errors. Isn't it possible to compare values which are contained in two separate datasets in SSRS?
Seems like something like the following logic should work:
IIF(CountRows("Monthly_DataSet") > 0 OR CountRows("Weekly_DataSet") > 0 , FALSE, TRUE)
Obviously the above expression will return syntax errors, but you'll get the point as to how i'm thinking. How can I set the visibility of the tablix based on these two charts?
Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave
I want to create a details view page without using the DetailsView control. I would prefer to have separate textboxes or labels for each column. I just don't have a clue how to go about after the Select is done putting the data into the boxes. Below is as far as I've gotten. The purpose of the label is just my way of wanting to display the QueryString value, it serves no other purpose. protected void Page_Load(object sender, EventArgs e) { { string tktid = Request.QueryString["id"].ToString(); Label1.Text = tktid.ToString(); } { SqlCommand cmd = new SqlCommand("Select tkt_creator from Ticket where tkt_id = @tktid", HelpdeskConnectionString); HelpdeskConnectionString.Open(); cmd.ExecuteReader(); Label2.Text = ?; } Any help would be appreciated. So far, I've learned a lot from this forum. Y'all have been great.
at 9.00am -- full backup at 9.15am - Transaction log backup at 9.30am - Transaction log backup
Suppose at 9.20am(say) the user deletes a table and i want to restore that particular table,i will use STOPAT clause when im restoring the transaction backup at 9.30am (WITH RECOVERY).But my doubt is how to find out the exact time the user has deleted the table.I have even checked the SQLServer Error log file but it doesnt give the exact date and time stamp of the deletion activity tht has taken place so that i can use that in STOPAT clause of RESTORE LOG command.
Please tell me where should i look for date and timestamp for all the Deletions/Updations done on a particular database.
For UserA : - For problemID 1 -> submitted three times -> rejected for first two submission and accepted on third submission. - For problemID 2 -> submitted one time -> accepted on first submission
For UserB : - For problemID 1 -> submitted two times -> rejected for first submission and accepted on second submission. - For problemID 2 -> submitted one time -> accepted on first submission
Now I would like to process the table and want to get the following result :
Explanation : - For each rejected submission, a -2 point penalty. - UserA have submitted probelmID 1 - > score of problemID 1 is 10. - > first two times rejectd - > third time accepted. -> score = 10 - 4 = 6 - UserA have submitted problemID 2 - > score of problemID 2 is 30 - > first time accepted. No penalty will be counted - > score = 30
Hello! suppose i have two tables, table1 columns(empcode (pk), empDept) and table2 columns(empcode (FK),Date,Attendance) i wanted to write a query to get output like DEPT ABSENT ----------------------------- Accounts 10 EDP Section 0 ** Admin 2 Stationary 0**
if no employee is absent in the department it has to display Zero
I am trying to use a local variable and case statment in a where clause but I keep getting an error. I'm passing an input parameter into a stored procedure and based on the input parameter I want the WHERE clause to reflect.
spOpenClosedList @openclose varchar(5)
DECLARE @result varchar(12) if @openclose = 'open' Begin set @result = 'is null' end else set @result = 'is not null'
SELECT * FROM WorkOrderTbl WHERE WorkOrderTbl.CompletedDate @result AND username = "Thomas"
SELECT @CURRCOLUMN, COUNT(*) FROM CUSTOMERS WHERE @CURRCOLUMN = ""
It gives me an error. I basically need to loop through an entire tables variables to find out occurances of the column being either "" or null and return me a count of the number of occurances. This is just a small part of that task.
Here is the setup. Text Box: User enters in customer transaction number Button: User clicks button to display information about the customer
Now the database has a lot of unique customer numbers. What I am trying to do is take what the user enters so it can search the database and pull out that customers information. I am having a hard time getting that information from the textbox. Any suggestions! Here is what I have so far.
Private Sub btnViewFlow_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnViewFlow.Click
Try
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection
Me.SqlDataAdapter1 = New System.Data.SqlClient.SqlDataAdapter
Me.SqlSelectCommand1 = New System.Data.SqlClient.SqlCommand
Me.SqlDataAdapter1.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "DTR_Document_Summary", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("DocumentId", "DocumentId"), New System.Data.Common.DataColumnMapping("PartnerId", "PartnerId"), New System.Data.Common.DataColumnMapping("PartnerName", "PartnerName"), New System.Data.Common.DataColumnMapping("Direction", "Direction"), New System.Data.Common.DataColumnMapping("TranSet", "TranSet")})})
1) Rows ordered using textual id rather than numeric id
Code Snippet select cast(v.id as nvarchar(2)) id from ( select 1 id union select 2 id union select 11 id ) v order by v.id
Result set is ordered as: 1, 11, 2 I expect: 1,2,11
if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
2) SQL server reject query below with next message
Server: Msg 169, Level 15, State 3, Line 16 A column has been specified more than once in the order by list. Columns in the order by list must be unique.
Code Snippet select cast(v.id as nvarchar(2)) id from ( select 1 id union select 2 id union select 11 id ) v cross join ( select 1 id union select 2 id union select 11 id ) u order by v.id ,u.id
Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
It reproducible on
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
and
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
In both cases database collation is SQL_Latin1_General_CP1251_CS_AS
If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again.
Could someone clarify - is it bug or expected behaviour?
Far below (in section "original 3 steps"), you see the following:1. a temp table is created2. some data is inserted into this table3. some of the inserted data is removed based on a join with the sametable that the original select was made fromIn my opinion, there is no way that the join could produce more rowsthan were originally retrieved from viewD. Hence, we could get rid ofthe DELETE step by simply changing the query to be:INSERT INTO #details ( rec_id, orig_corr, bene_corr )SELECT rec_id, 0, 0FROM viewDWHERE SOURCE_SYS NOT IN ( 'G', 'K' )AND MONTH( VALUE_DATE_A8 ) = MONTH( @date )AND YEAR( VALUE_DATE_A8 ) = YEAR( @date )AND INMESS NOT LIKE '2__' ---- the added line===== original 3 steps (mentioned above) =====CREATE TABLE #details (rec_id UNIQUEIDENTIFIER PRIMARY KEY NOT NULL,orig VARCHAR(35) NULL,bene VARCHAR(35) NULL,orig_corr TINYINT NULL,bene_corr TINYINT NULL)INSERT INTO #details ( rec_id, orig_corr, bene_corr )SELECT rec_id, 0, 0FROM viewDWHERE SOURCE_SYS NOT IN ( 'G', 'K' )AND MONTH( VALUE_DATE_A8 ) = MONTH( @date )AND YEAR( VALUE_DATE_A8 ) = YEAR( @date )DELETE dFROM #details dJOIN viewD v ON ( d.rec_id = v.rec_id )WHERE INMESS LIKE '2__'
SELECT * FROM bookkeep RIGHT OUTER JOIN acraccts ON LEFT(bookkeep.accnum, 9) = acraccts.p_accnum WHERE (bookkeep.busdate = '03/09/10') AND (bookkeep.tradetype = 'S')
on my sql box, if i run it, i get no data.
i figured out that if i change the where clause to (bookkeep.busdate='2003/09/10') it works
OR
if i simply put SET DATEFORMAT YMD on the first line before the SELECT * that it also works.
my problem is the basic query is hard coded and i really can't change it.
is there a global sql server setting that will make my sql 2000 sp3 box recognize '30/09/10' as 2003/09/10?
I am having difficulty constructing a where clause. I have 4 columns in a table. Col1 is never NULL. Col2,3,4 may or may not contain NULL values. Here is the situation.
1. Col2,3,4 are NULL WHERE Col1 = condition
2. Col2 is NULL, 3 may or may not be NULL. When Col3 is NOT NULL, Col4 may or may not be NULL
where col1 and (col3(Not Null values) OR Col4(Not Null values)) = condition.
My source table has two columns... Policynum and PolicyStartdate and data looks like.. . Policynum             PolicyStartdate 123G                      01/01/2012    456D                      02/16/2012     789A                      01/21/2012 163J                      05/25/2012
Now my output should return based on 3 parameters..
First two parameters are date range... let say @fromdt and @todt
Third parameter is @policynum
Scenario-1: Enter dates in date range param and leave policynum param blank Ex: policystartdate between '01/01/2012 and '01/31/2012'.... It returns 1st and 3rd rows from above in the output
Scenario-2: enter policy num in policynum param and don't select any dates Ex:Â policynum ='456D'Â Â Â Â It returns 2nd row in the output
Scenario-3: Select dates in date range param and enter policynum in param Ex: policystartdate between '01/01/2012 and '01/31/2012' and policynum ='163J'. it should return only 4th row even though dates were selected(Override date range when policynum is entered in param and just return specified policynum row in the output)
Hi All, Would somebody be able to help me from pulling my hair out!??I have a form with a radiobuttonlist. I would like to change my select statement depending on what radiobutton value is selected.E.g.SELECT * FROM table WHERE <<variable from radiobuttonlist>> LIKE 'Y'So,if radiobutton value selected = 1, it will select * from column A in the dbif radiobutton value select = 2, it will select from column B in the dband so on... Am i attempting to do the impossible?Thanks All,
