Criteria
Retrieve records with independent price and its total volume per minute
SELECT SUBSTRING(st,1,4) AS Ttime,d_price AS Price,SUM(l_cum) AS Volume FROM cmd4
WHERE sd='20060717' AND serial='0455'
GROUP BY SUBSTRING(st,1,4),d_price,l_cum
I am developing basket and need a simple way to get price x quantity + total price.
I get back a recordset which has a varying number of items, each item has a price and quantity. Using SELECT ((productprice)*(productquantity)) AS subtotal, product name, productid
I don't know how to add all subtotals to get a total, I have tried putting in SUM but but cant get it to work.
We were asked to create an SQL function to return a unit price based on various criteria. The function works fine except for the tiered pricing (use of BillingPriceTable) calculation. What we need to do is break up the total quantity passed to the function and return the total of prices found. In our example, we passed a quantity of 9,721 units and need to return a total price of 231.92 using the table below.
Low Qty High Qty Fee Actual Qty Price 0 7500 0.025 7500 187.50 7501 15000 0.020 2221 44.42
Below is the table definition that we have to work with (ugghh).
What we have so far is shown below. The columns that start with bdxx are the "High Qty" values and the columns that start with prxx are the price for that quantity range. So, the current SELECT is shown below and it returns the price based on the entire qty of 9,721 and returns a unit price of 0.020 and should return 0.023857628
The current SELECT is shown below and is returning 0.020 which is the fee for the total rather than calculating the fee twice, once for the 0-7500 and again for the 7501-15000 (actually 7501-9721). Two things came to mind, one was a WHILE loop and the other was possibly a ranking function of some sort.
ALTER FUNCTION [dbo].[fn_GetPrice] ( @plincdvarchar(3), @pgrpcodevarchar(4), @pitmcodevarchar(4), @qtydecimal(10,1) = 1, @corpnbrvarchar(9) )
I'm fairly new in SQL. Been trying for months to create the right script for this particular case but still cannot give me 100% result as required.
SCENARIO :
I am required to query from 2 tables for those unique record that meets both conditions below:- 1. Status is 1 @ max (trans_id), paychnl = CC 2. Status is 2 @ max (trans_id), paychnl = A or B
FYR, 2 tables and respective columns to query are as below:- table PTFF --> col ID, TRANS_ID,TRANSDATE,EFFDATE,TRANSCODE table CHFF --> col STATUS,PAYCHNL
FYI, status refers to the paychnl method status:- ==> 1 means the current paychnl method ==> 2 means the previous paychnl method
paychnl method can be multiple because it will be defined as 2 for all the histories' paychnl chosen earlier, but 1 should only be unique as it is the latest paychnl chosen for each unique ID. however, it may appear more than once when it's taking those in earlier TRANSDATE, so here we would need the max trans_id as it will show the latest updated TRANSDATE.
Apart from that, I need only those most recent paychnl to be A or B and the latest paychnl is CC so, this been indicated by the same max trans_id for the same ID.
Aft trying so many times on this MAX command but failed to get any result, I only managed to come up to this part only. please refer below:-
table PTFF --> col ID, TRANS_ID,TRANSDATE,EFFDATE,TRANSCODE table CHFF --> col STATUS,PAYCHNL
FROM DBO.PTFF PTFF JOIN DBO.CHFF CHFF ON CHFF.ID = PTFF.ID WHERE PTFF.TRANSDATE BETWEEN 130501 AND 130831 AND PTFF.TRANSCODE='T522' AND (CHFF.STATUS=1 AND CHFF.PAYCHNL='CC' OR (CHFF.STATUS=2 AND (CHFF.PAYCHNL='A' OR CHFF.PAYCHNL='B')))
However, the script above returns :-
1. All those records with STATUS 1 regardless paychnl is A or B in most recent status 2, 2. Expected results also appear ==> 1 same ID with status 1 while paychnl=CC and status 2 while paychnl=A or B 3. Also duplicates of expected results but for different TRANSDATE and not at MAX TRANS_ID
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
SELECT vehicleref, capID, make, model, derivative, COUNT(vehicleref) total, SUM(case when inStock=1 then 1 else 0 end) AS stock, (SELECT dealer FROM tblMatrixDealers WHERE id=dealerid) As Dealer FROM tblMatrixStock WHERE inStock = 1 GROUP BY vehicleref, capID, make, model, derivative, dealerid
I need to get the number in stock, i.e. when instock=1 and the total i.e. when instock=1 or 0
But the problem is i'm only showing records where instock=1 so my SUM(case when inStock=1 then 1 else 0 end) AS stock statement is useless.
Hi, does anyone know how to retrieve mistmatched records across 2 tables. To clarify, I have table A with 1175 records and Table B with 894 records. The records from table A match exactly some the records in table B.
I want to create another table with the extra 281 records from Table A which does not match that of Table B.
I have tried the query with Select where fields_1.a<>fields_2.b AND fields_2.a<>fields_2.b etc but that doesn't seem to work.
I really need creating a query that will retreive all records from a table where the dbo.CorpAdv.AcctNum field equals a specific value (for this example "0023"), the TranCode = "R" and the sum of the records, starting with the latest, equals the value of a field in another table (dbo.Master.TotalAdv)
dbo.Master.TotalAdv is numeric (dollar amount) and in this example the value is $1,850.00
dbo.CorpAdv.pID is an integer and unique ID for each record, later records have higher numbers dbo.CorpAdv.AcctNum is text field dbo.CorpAdv.AdvAmt is numeric (dollar amounts)
I need to list customers in a table that represents sales over the years.
I have tables:
Customers -> id | name |... Orders -> id | idCustomer | date | ... Products -> id | idOrder | unitprice | quantity | ...
I am using this SQL but it only gets one year:
SELECT customers.name , SUM(unitprice*qt) AS total FROM Products INNER JOIN Orders ON Orders.id = Products.idOrder INNER JOIN Customers ON Customers.id = Orders.idCustomer WHERE year(date)=2014 GROUP BY customers.name ORDER BY 2 DESC
I need something like this:
customer | total sales 204 | total sales | 2015 | total sales (2014 + 2015) -------- customer A | 1000$ | 2000$ | 3000$ customer B | 100$ | 100$ | 200$
Is it possible to retrieve these values in a single SQL query for multiple years and grand total?
I've a excel spreadsheet with 650 records with unique PONumbers. I need to pull data from SQL server based on the PONumbers. I don't want to run select statement 650 times. How do I retrieve the records in efficient way?
I would like to get some advises on how creating some kind of reports with Report builder
Lets say i have these two tables with these columns
Table Product
ProductName
Table ProductInstance
Product ID CreationDate CompletedDate
I would like to be able to create with report builder a report that looks this
Start Date : 2008/10/01 - End Date : 2008/10/30
Total Total Total In Out OutStanding ProductName1 10 0 3 ProductName2 5 5 2 ProductName3 8 8 5 ProductName4 12 5 6
Total In : total number of product created between StartDate and EndDate Total Out : Total number of product completed between Start Date and End Date Total OutStanding : Total number of product that have not yet been completed.
Any suggestion and advise on how to achieve this ?
I have a robust query that returns a dataset and the data is good, however some of the records contain the exact same data with the exception of the 'Price' field. I want to combine the records that are identical and SUM the values in the 'Price' field. My query and example return dataset is below.
Query: -------- select distinct 'On-Demand' as 'Business Line', o.OrderID as 'Order #', isnull(d.DisplayCode,'UNK') as Hub, isnull(rz.RouteID,'UNK') as 'Default Route', 'On-Demand' as 'Assigned Route',
I am copying data from database to an excel file through SSIS. database is MS SQL 2005 and BIDS is also 2005.However, the job doing this task fails every time.As per investigation, the result of the query is more than 100,000 rows and we know that excel has a limit of 65000 rows of data.Is there a way of setting the limit up? or something? a better approach maybe so that everything will be copied to the excel file successfully.
The PrimeOutput method on component "Source - Query" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. End Error Error: 2015-10-22 04:34:58.05 Code: 0xC0047021
Source: Data Flow Task Description: SSIS Error Code DTS_E_THREADFAILED.
Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 4:30:00 AM Finished: 4:35:05 AM Elapsed: 304.844 seconds. The package execution failed. The step failed. "
Hi,We are discussing possible implementation for sql2005 database(s). This database will serve one web portal. Part of data will get into it by hand, and part will be replicated from internal system.Some of us are for creating two separate databases, since there are two separate datasources. One, automatic, will change very little over time and requires almost no maintenance. Other datasource will be manual input. Tables and procedures related to this part will change over time.Some of us are for creating single database, since it will serve one web site. More important this group is concerned about performance issues since almost every select will require join between tables that would be stored in two separate databases. Do these issues exist? Can you share some insights, comments, links about this?
I haven't a clue how to accomplish this.All the data is in one table. The data is stored by registration dateand includes county and number of students brokne out by grade.Any help appreciated!Rob
The key to this problem is the "valueID". The first digit of the value is significant - the "1" and the "7" in the above mean the values are parts of different groups of search criteria.
What I need to do is to select from this list into a temp table all those bookings (identified by AdBookingID) which have valueIds of both types - i.e. an row in the table where the valueId starts with a 1 and a row in the table where the valueId starts with a 7 - in the above data sample the only AdBooking which qualifies is 98220.
I worked out a method of doing this going by the number of entries each item had in the table:
select count(distinct valueId) as valueId, adWeeks, clientId, adID, AdBookingID into #worktable from #tmp group by adWeeks, clientId, adID, AdBookingID having count(distinct valueid) > 1
Which is largely accurate. But - and here's the killer - although each adBooking can only have one valueId starting with 1, it can have multiple entries starting with 7. These bookings are rare, but they do exist and are causing anomalies in the data returned which - if you recall - must only contain booking records for which there are valueId entries with both a 1 and a 7.
Can anyone suggest a way I can get just the data I need? Cheers, Matt
I have a question regarding ROLLUP and how to use the operator.
I've been asked to retrieve a list showing the total repair cost per year displaying Transport Type, Manufacturer and Transport. The query I used is:
SELECT ty.Description AS TransportDescription, t.SerialNumber AS Transport, ty.Manufacturer, SUM (r.RepairCost) AS RepairCost, YEAR(r.EndWorkDate) AS [Year]
[Code] .....
How could I use the rollup function to display subtotals per Transport Type, Manufacturer and Transport?
I have regular work that requires me to extract a bunch of customer records from our database, and then remove duplicate address destinations (so we dont mail the same address more than once).
I can currently achieve this using a combination of my poor SQL skills and Excel, but it's really not working out for me, so looking for SQL wizardry necessary to do it just in SQL.
Relevant fields: Member.AddressBarcode (This is a unique barcode (Text representation of a base-3 number) based on the customer address. So if there's more than one record in the pulled records with the same barcode, we then look at Member.MemberTypeID to determine whether to include this record in the results or discard it as a duplicate. Note that AddressBarcode may be blank if the mailing address couldn't be validated, if it is blank we don't discard it since there is no easy way to detect duplicate addresses without the barcode)
Member.MemberTypeID (This is the type of member account. We have 3 types - Single, Joint Primary, Joint Secondary, represented in this field by the numbers 1/2/3. This is also the order of preference of who to mail. So if there is a Joint Primary and Joint Secondary with the same mailing barcode, we want to discard the Joint Secondary from the results, so that the Joint Primary is the record we include in the results of who to mail.)
Member.ID (Unique numeric ID for each customer. Kind of irrelevant here, but it's a key)
So some pseudo code for what I'm trying to achieve is:
(Member.MemberTypeID = 1) OR (Member.MemberTypeID = 2 AND Member.AddressBarcode not in results of Member.MemberTypeID = 1) OR (Member.MemberTypeID = 3 AND Member.AddressBarcode not in results of Member.MemberTypeID = 2 AND Member.AddressBarcode not in results of Member.MemberTypeID = 1)
I'm trying to figure out why I am not getting any result set back from a search that includes non-alphanumeric or non-printable characters. For instance, if I have a table with a 20 character name column with names with beginning ranges from A-Z, why doesn't the following return any rows: select * from table where name < CHAR(126). In the ASCII character set, 126 is a tilde (~) which is numerically above the alphanumeric ranges 1-9,a-z, and A-Z. Shouldn't all records that sort lower in the character range be included in the result set ?
I'm assuming this has something to do with the default collation sequence being used which somehow does not include characters outside the alphanumeric range. Any ideas ?
update wce_contact set blank = 'missing' where website in ('www.name1.co.uk','www.name2.co.uk','www.name3.co.uk')
I know this query will set 'blank' to missing when it matches the above websites. However if i wanted to set blank to 'missing' where mail1date is not null and mail2date is not null (keep going to mail18date not null) how exactly would i go about this?
I guess it would be a case of adding another bracket somewhere but im unsure?
create table testedit ( editid int ,Tguid varchar(20) ,ttime numeric(4,2) ,numApp int ,numOrg int ,custid varchar(1) )
INSERT INTO testedit values(1,'ABC',12.52,40,11,'Z') INSERT INTO testedit values(2,'ABC',12.52,500,33,'Z') INSERT INTO testedit values(3,'ABC',12.53,500,33,'Z')
Out of this records I would like to select only the 1st and the 3rd record. ie. My result should only have the below rows
Hi All,Sorry if the subject line is too obscure -- I couldn't think of a wayof describing this request.I have a table that contains approximately 1 million records.I want to be able to be able to select the top x records out of thistable matching variable criteria.Pseudo table records:custid, category, segment1,1,12,1,13,1,14,1,15,1,26,1,27,1,28,1,29,2,110,2,111,2,112,2,113,2,214,2,215,2,216,2,217,2,318,2,319,2,320,2,3So, what I'm trying to do is return a recordset, for example, thatcontains the top 2 of each variation of category and segment.ie:1,1,12,1,15,1,26,1,29,2,110,2,113,2,214,2,217,2,318,2,3The only way I can think to achieve this is in a while statement,performing individual selects against each combination, feeding thewhere criteria by variables that I automatically increment.I can't help thinking there's a much more graceful way of achievingthis?If anyone can give me any insight into this I'd be incrediblyappreciative!Many thanks in advance!Much warmth,Murray
i am doing a research about high volume database treatment (maybe a database with tera bytes volume) , so is there any optimization or specialization for queries deal with such database? !!
I would like to make a listbox only appear if there are results returned by the SQL select statement. I want this to be assessed on a click event of a button before the listbox is rendered.I obviously use the ".visible" property, but how do I assess the returned records is zero before it is rendered?
I have a table T (a1, ..., an, time, id). I need to select those rows that have different id (GROUP BY id), and from each "id group" the row that has the latest field 'time'. Something like SELECT a1, ..., an, time, id ORDER BY time DESC GROUP BY id. This is the wrong syntax and I don't know how to handle this.
When querying a bit field, I am encountering a problem with MS SQLServer returning a larger number of records for a table than theactual number of records that exist within that table.For example, my customer table has 1 million unique records, so theresults of the following query are as such:select count(customer_nbr) from customer = 1,000,000There is bit field in the customer table that denotes whether acustomer has placed an order with us called. That flag is calledorder_flagIf I run the following query:select count(customer_nbr) from customer where order_flag = 1The result is 3,000,000 records.There is no logical way that this is possible, as my table onlycontains 1,000,000 unique records and the number of customers with anorder should be a subset of this.If a run the above query with a distinct before customer number, I getthe results I want:select count(distinct customer_nbr) from customer where order_flag = 1600,000 records.So while I can get to the answer I want, I have no idea why I amreturning incorrect values if I don't select distinct.Can anyone help? I checked microsoft support and message boards buthaven't seen anything.I should note that the bit field is indexed.I am not sure if that isthe problem or not.
