According to MS Knowledge Base Article 269824, "[SQL Server 2000 Client
Tools] ... must be installed ... on any computer on which someone may make
design changes in an Access project to a SQL Server 2000 database".
This is the situation I'm facing. Can I download these Client Tools and
install them for free, or are they only available on the SQL Server 2000
Installation CD?
Thanks for any help!
Hi,
I'm trying to re-install SQL Server 2000 Desktop Engine andSQL Server client tools. I have succesfully re-installed the desktop engine,but I am getting the following error message when attempting to re-install theclient tools.
"Setup has detected an existing client tools only installation.
Please use the maintenance mode to add client components"
Unfortunately the Upgrade/Add/Remove option is greyed out as
an install option.
I attempted the registry hive rebuild option and the install appeared
to succeed. However, I cannot access any tools (Enterprise Manager
comes up with the message "The selected file cannot be found").
At this point, the desktop engine appears in Add/Remove programs
Window, but no other SQL Server components.
Any help very much appreciated!
Eric Yeoman.
Hi,
A quick Q for all the Sql Server 2000 beta testers out there. Does anyone know of any problems associated with using SS2000 Enterprise Manager with a SS7 backend running SP2? In particular, I'm keen to try out the Tsql debugger features, if they'll work with SS7.
Many thanks in advance,
Jon Reade,
Sql Server 7 DBA
NEC Technologies (UK) Ltd
Telford, Shropshire.
Hello,
I am trying to install the SQL Server 2000 client tools on my XP desktop and after the install I get the erroe message:
Snap-in failed to initialize
when I launch the enterprise console.
I applied service pack 3a but I get the exact same error.
Any one know how I can fix this?
Thanks!
Hi,
I have many sql 2000 DTS packages that I support from my development workstation running v2000 sp4. Packages are altered on the development machine and then go through a normal release mechanisms to production via testing servers etc.
I have recently installed the client tools for SQL Server 2005 on my desktop to evaluate the product. The 2005 DB instance is running on a seperate server.
So, I have dev edition of sql 2000 and 2005 client tools (including BI Dev studio etc) on my workstation.
I have recently had to make changes to a 2000 DTS package and used my 2000 enterprise manager to do so. No Problem- saved and tested fine on my workstation.
But when I try and release it to another server, or open the package using enterprise manager from another machine that does not have sql 2005 installed - I get an error message 'Unspecified error'. This I've seen before when trying to open packages created in v2000 , using v7 or where the service packs are different between machines.
Digging around my workstation and comparing some of the DLLs I know to be required to distribute DTS packages (from RDIST.txt) it seems that some of the SQL 2000 dll files have been updated by my 2005 installation.
E.g
DTSFFILE.DLL on my machine is 2000.85.1054.0 whilst on any 'clean' 2000 machine is at version v2000.80.760.0
Surely it cant be right that SQL 2005 has newer versions of components for SQL 2000 than is available with the latest SP for the actual product! Especially considering that the installation of 2005 does not even allow you to edit 2000 DTS packages through the management studio without a 'special' download' of the feature pack,(whihc by the way does not work very well either)
So am I to conclude that you can not run side by side installations of SQL 2000 and 2005 on a single machine and expect 2000 to run as it did previously
Hi,
I have many sql 2000 DTS packages that I support from my development workstation running v2000 sp4. Packages are altered on the development machine and then go through a normal release mechanisms to production via testing servers etc.
I have recently installed the client tools for SQL Server 2005 on my desktop to evaluate the product. The 2005 DB instance is running on a seperate server.
So, I have dev edition of sql 2000 and 2005 client tools (including BI Dev studio etc) on my workstation.
I have recently had to make changes to a 2000 DTS package and used my 2000 enterprise manager to do so. No Problem- saved and tested fine on my workstation.
But when I try and release it to another server, or open the package using enterprise manager from another machine that does not have sql 2005 installed - I get an error message 'Unspecified error'. This I've seen before when trying to open packages created in v2000 , using v7 or where the service packs are different between machines.
Digging around my workstation and comparing some of the DLLs I know to be required to distribute DTS packages (from RDIST.txt) it seems that some of the SQL 2000 dll files have been updated by my 2005 installation.
E.g
DTSFFILE.DLL on my machine is 2000.85.1054.0 whilst on any 'clean' 2000 machine is at version v2000.80.760.0
Surely it cant be right that SQL 2005 has newer versions of components for SQL 2000 than is available with the latest SP for the actual product! Especially considering that the installation of 2005 does not even allow you to edit 2000 DTS packages through the management studio without a 'special' download' of the feature pack,(whihc by the way does not work very well either)
So am I to conclude that you can not run side by side installations of SQL 2000 and 2005 on a single machine and expect 2000 to run as it did previously !!!
Dear All,
how can we know that wether we had server tools or client tools on my machine?
Arnav
Even you learn 1%, Learn it with 100% confidence.
HiHow network administartor can find , who has AQL server client tools onhis system?Thanks
View 2 Replies View RelatedIn Server Explorer of VS .NET 2003, I tried to generate SQL script of the dbo.Portal (ibs)
but got
"To use this feature, you must install the client tols for SQL Server"
When I searched for Help, I've got
"1.Insert the MS SQL Server 2000 compact disc in your CD-ROM drive"
I installed and use MSDE and cannot recall the use of any CD for installation.
1)
Does it mean that I cannot install client tools from MSDE installation?
If not...
2)
I have installation of MS SQL Server200 Enterprise that cannot be installed on Windows Xp Professional that I use. Can I still install "client tools" from Enterprise Ed. for MSDE
What is the quickest and easiest way to use client tools for 2005 like 2000....
?
I'm trying to install SQL Server 2000 client tools on an XP workstation.MSDE already exists on the workstation. During the install I am neverprompted for a location to install to. I want to install to my D drive. Theinstall defaults to my C drive.Any thoughts?
View 2 Replies View RelatedHello,Is it necessary to upgrade the Client Connectivity Tools on all clientmachines after the SQL Server database server is upgraded from Version7.0 to 2000?Thank you in advance!Eddy
View 1 Replies View RelatedI have to go back east.. I am going to be working remotely.
We still used SQL Server 2000 at work..
Will I be able to use SQL Server 2005 Express edition to remotely connect to and modify stored procs and tables?
what are all my options??
Anybody please help me !
i was tried to install SQL Server 2k Client tools connectivity to my win 95, i was follow the installation procedure, 1). install common library updates for win 95, and then 2). install the server component (client connectivity tools), the installation is running well till copying "Microsoft Data Access Components - MDAC", i got error message : "Installation of the MDAC package failed (-1)". (so the installation doesn't complete).
please anybody help me, what's happen to my computer ?????????
:confused:
thanks for the help.
Andre.
Hi,
I just installed SQL Server for the first time on a windows 2003 OS which is on its on server. Then, I installed the client tools on my local computer. Now how do I connect to the sql server with my client tools? What I wanted to do is from my local computer use the enterprise manager and pull up the databases that are located on the server that contains the sql server.
Thanks a bunch,
Laura ;)
Hello
I am trying to install client tools on my desktop and I am getting the following error :
Edition Change Check (Warning)
Messages
Edition Change Check
To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005,
you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.
This error , I am have seen in the logs.
The installation wizard is closing down with the above log error.
Thanks
Hello
I am trying to install sql server 2005 client tools and I get the following error:
Error code 2356 : Could not locate cabinet in stream : sql.cab
How can I go about this
Thanks
Someone please help me before I loose all of my hair :mad: !!!
I have two machines, a Windows Server 2003 machine running an SQL Server Standard Edition database instance and client tools (Enterprize Manager etc.), and a workstation PC running Windows XP SP2 which has just the SQL Server client tools (not an actual DB instance).
I'm trying to use the Enterprize Manager client tool on my WinXP machine to remotely connect to the server instance on the server PC (via 'New SQL Server Registration' option). Everytime I do this I get the following error message:
Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server Connection.
Now I've tried using different usernames and passwords. I have login details for my SQL Server set to use Windows Login rather then SQL Server login, so I tried remotely connecting with the username and password for the server PC, tried 'sa' with server password, even tried setting up a new user on the server and logging in from the client with that, no luck. I've opened up correct ports 1433 on both PCs, even disabled the windows firewalls algother. Both server and client have SP3a installed, WinServer2003 has SP1 and XP SP2.
So I'm at a loss to how to remotely connect to my SQL Server. FYI I know the server itself is working fine because I can connect to it using Enterprize Manager/Query Analyser on the local machine. Any ideas? Many thanks for your help!
Hello,
I have installed SQL server 2005 enterprise edition on Windows 2003 virtual PC (full installation). The installation went through successfully. However, after install completed, I cannot find any of the client tools under the start menu -> all programs -> Microsoft SQL server 2005 menu. The only item listed under the SQL server 2005 is Configuration Tools, which is used to configure the database server.
I have tried to install the client component again (in case I didn't install them at the first place) but the installation process cannot be started since it detected that the client components have been installed already. I can also see the sql server native client running in the services.
The server engine is working fine since I can connect to that sql server using another machine where I have the client tool (SQL server management studio).
One of my friends has exactly the same problem. He installed the sql server 2005 Standard edition on windows 2003 server (full installation), but the client tools are not showing up in the start menu either.
I also checked the location for the SQL server management studio (Microsoft SQL server/90/Tools/Binn/VSShell/Common7/IDE), there is only one folder called publicAssemblies listed under. Is this correct or something is missing?
Thanks
Hello,
I have installed successfully Microsoft SQL server 2005 in MSCS.
However the set up did not install Workstation components (client tools - SSMS etc).
I have successfully installed workstation components in one node of cluster.
However setup is giving following error while installing workstation components on other node. (From this node MS SQL server 2005 was installed).
Product: Microsoft SQL Server 2005 Tools -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A, location: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, command: /setup
There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I did "C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, /setup".
It executed but no error, no output.
Any gues, help in isolating issue?
Any more information required.(Media is ok. Setup has been tried after reboot. There is enough disk space.)
Regards.
Mahesh
===========
Setup
1) Microsoft Cluster of two nodes.
2) Hardare - HP Blade servers
3) OS - Windows 2003 EE with SP2
4) SQL Server 2005 Standard Edition with SP2.
=============================
MSI (s) (B0:7C) [17:40:20:390]: Note: 1: 1722 2: SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A 3: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe 4: /setup
MSI (s) (B0:7C) [17:47:23:609]: Product: Microsoft SQL Server 2005 Tools -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A, location: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, command: /setup
MSI (s) (B0:7C) [17:47:35:921]: Note: 1: 1729
MSI (s) (B0:7C) [17:47:35:921]: Product: Microsoft SQL Server 2005 Tools -- Configuration failed.
MSI (s) (B0:7C) [17:47:35:953]: Cleaning up uninstalled install packages, if any exist
MSI (s) (B0:7C) [17:47:35:953]: MainEngineThread is returning 1603
MSI (s) (B0:A0) [17:47:36:062]: Destroying RemoteAPI object.
MSI (s) (B0:80) [17:47:36:062]: Custom Action Manager thread ending.
I downloaded and performed a full install of SQL Server Express 2008 Nov CTP. It was installed on a fresh installation of Windows Vista Enterprise x64.
During setup, I checked the 'Client Tools' box which has the description:
"Includes management and development tools: SQL Server Management Studio, SQL Server Configuration Manager, SQL Server Profiler, and Database Engine Tuning Advisor"
The installation ran fine with no errors. After install I looked for the Management Studio but couldnt find it anywhere. No SQL Server Profiler or Database Tuning Advisor either. The only tool that appears to have installed is the SQL Server Configuration Manager.
If I check my Start Menu, the only 2008 items that exist are
Microsoft SQL Server 2008 >
Configuration Tools >
SQL Server Configuration Manager
SQL Server Error and Usage Reporting
SQL Server Installation Center
I checked the summary log and everythign PASSED:
Package results:
Passed
Execution statistics:
Exit code: 0x00000000
Exit message: Passed
Package start time: 12/13/2007 14:05:39
Package end time: 12/13/2007 14:09:06
Package install location: c:Program Files (x86)Microsoft SQL Server100Setup Bootstrap
Package initial action: Install
Media source location: Install
Media version: 10.0.1075.23
Machine properties:
Machine name: xxx
Machine processor count: 2
OS version: Windows Vista
OS service pack:
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
Properties provided in package.xml file:
LegalProductName: SQL Server Database Services 2008
Description: SQL Server Database Services 2008
Details: Install for SQL Server Database Services 2008
ProductName: SQL2008
Version: 10
SPLevel: 0
KBArticle: KB876234
KBArticleHyperlink: http://support.microsoft.com/?kbid=876234
Command line arguments provided:
ACTION: Install
INSTANCEIDSUFFIX:
Product features discovered:
Product: SQL2005
Product: SQL2008
Feature status after execution:
Database Engine Services: Passed
Replication: Passed
Client Tools: Passed
Windows Installer logs generated during execution:
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Snac_Cpu64_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Msxml6_Cpu64_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Tools_Cpu32_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_SqlWriter_Cpu64_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_SqlBrowser_Cpu32_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Sql_Cpu32_1.log
What is the issue here?
I need to be able to administer SQL 6.5 and 7.0 servers from a single pc.
I have been told that I can't have SQL 6.5 and 7.0 tools installed on the same pc.
Is this correct? I can't find anything in BOL or Technet on the subject.
Regards,
Kevin Napier
What if any are the implications of using the SQL 2K Client tools to access and administer SQL 7 dbs???
View 2 Replies View RelatedSQL 2000 Client tools SQL7 SP3 Server back-end.
I have a DTS Package created with SQL2000 client tools, which contains a SQL connection and a sql task (exec sp_who2). When I run the package on my PC it works, when I run the package via SQL Agent it comes back with :-
DTSRun: Loading... Error: -2147287038 (80030002); Provider Error: 0 (0) Error string: The system cannot find the file specified. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 713. Process Exit Code 1. The step failed.
I am not using any files. The DTS Package is called PMC_Test
Here is the dtsrun syntax from the SQL Agent job.
DTSRun /S "APP003" /N "PMC_Test" /E
When I try and open the DTS package using SQL7 client tools I get the same error message.
Does anyone know of problems when using SQL7 Server and SQL2000 Client tools when editing and saving DTS Packages ?
My SQL 7 Server doesn't seem to recognise the DTS Package if saved from SQL 2000 Client tools, but works happily with packages saved from SQL7.
Can anyone clarify ?
Hello everybody,
I have the SQL 6.5 client tools installed on my machine, I also have MSDE installed. However the client tools do not see the MSDE. I keep getting the error message that I have attached to this message as a gif. Anybody have any ideas it would be appreciated.
Dear friends,
dts and bcp works with client tools? is export and import is nothing but DTS or something other is there?
thankyou very much.
I have installed SQL 2005 on a new machine and cannot find any of theclient tools I am used to having: query analyzer, enterprise mgr.,profiler. Shouldn't they be included in a default installation if Ichose to install client tools? Where do I go to find them?*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View Relatedhi everyone,
Client Tools brings a BIDS platform?
TIA
I am trying in vain to reinstall MS SQL Server(2005 SP2) Management Studio
(on Windows XP Pro SP2) due to.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2616564&SiteID=1&mode=1
And I have catch-22 (or catch-33) situation trying to reinstall it.
If I try to launch from DVD Z:SQL Server x86Toolssetup .exe from command prompt (cmd):
setup SKUUPGRADE=1
even after deleting (I tried first without deleting)
Microsoft SQL Server Native Client
Microsoft SQL Server 2005 Setup Support Files
in
Add or Remove Programs in Control Panel,
then I end up with
--------------------------------------
Name: Microsoft SQL Server 2005 Tools
Reason: Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Build version check:
Your upgrade is blocked because the existing component is a later version than the version you are trying to upgrade to. To modify an existing SQL Server component, go to Add or Remove Programs in Control Panel, select the component you would like to modify, and then click Change/Remove
------------------------------
and then
----------------------------
TITLE: Microsoft SQL Server Setup
------------------------------
None of the selected features can be installed or upgraded. Setup cannot proceed since no effective change is being made to the machine. To continue, click Back and then select features to install. To exit SQL Server Setup, click Cancel.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=SQLSetup90&EvtType=28108
------------------------------
BUTTONS:
OK
------------------------------
How should I reinstall client Tools?
Might be to merge original SS2005 DVD with downloaded SP2?
Hi ,
I have installed the SQL 2005 Client tools in anticipation of our servers been upgraded to SQL 2005 soon. I would like to create a local instance of SQL 2005 i.e. Express so I can try out functionality while I wait for the servers to be upgraded.
Is this possible or is now installing Express going to mess up some of the currently installed tools?
Help appreciated.
I am looking for best blogs/articles on Debugging, performance for SQL server 2000/2005.
Please provide me links
I`m planning on installing sql7 beta on my desktop. Currently I have sql6.5 client tools installed on my desktop for performing DBA tasks against our test and prod. sql6.5 servers. Does anyone know if installing sql7 will conflict with my sql6.5 client tools or cause any other problems?
Thanks