Hi,
I had a total server crash and lost all data except mdf and ldf files for databases.
I need to attach these to a fresh installation but it is giving Error 9003 The LSN(XXX:XX:SS) passed to log scan in database "ABC" is invalid.
I have tried using Sp_attach both for single file and N file but same error occurs.
Is there any way to attach this to a database or atleast re-cover data ?
Hi guys,
I am having a little trouble with a SQL Server 2000 database and I would like some help. After failure and recovery of a hard disk my database is marked as suspect and I cannot get it to work again. I have tryed a few things such as copying the database and the log files to another computer and then running the attach command which returns the following "Error 9003: The LSN(12:32:1) passed to log scan in database 'dbName' is invalid.".
Upon getting this error I have tryed with failure attaching a single file, I have also tryed to create a new database with the same name in the same location as the original, then replacing the new files with my old ones, restarting the SQL Server and getting the database into Emergency Mode hopping to extract the data through DTS or BCP Utility, but I cannot access the objects nor the data.
I have also tryed to create a new database with the same name and replace only the ".mdf" file with my old one, but failed.
I would be gratefull for any help.
Manuel.pereira@ricmade.pt
I copied the master's .ldf from Node 2. Now I get this error:
1999-10-08 16:46:22.52 kernel Attempting to initialize Distributed Transaction Coordinator.
1999-10-08 16:46:25.93 spid1 Starting up database 'master'.
1999-10-08 16:46:25.93 spid1 Opening file g:MSSQL7datamaster.mdf.
1999-10-08 16:46:25.93 spid1 Opening file g:MSSQL7datamastlog.ldf.
1999-10-08 16:46:25.95 spid1 Loading SQL Server's Unicode collation.
1999-10-08 16:46:25.96 spid1 Loading SQL Server's non-Unicode sort order and character set.
1999-10-08 16:46:25.99 spid1 Error: 9003, Severity: 20, State: 1.
1999-10-08 16:46:25.99 spid1 Cannot recover the master database. Exiting.
Looks like I'm screwed. Next problem - can you rebuild the master.mdf without the mastlog.ldf and how? Also, on an active/active SQL server setup, how would you re-install Node 1?
Help!
Mark Lowe
Please, help me.
I haven't a backup.
2006-05-26 11:35:22.76 server Microsoft SQL Server 2000 - 8.00.818 (Intel X86)
May 31 2003 16:08:15
Copyright (c) 1988-2003 Microsoft Corporation
Desktop Engine on Windows NT 5.2 (Build 3790: Service Pack 1)
2006-05-26 11:35:22.76 server Copyright (C) 1988-2002 Microsoft Corporation.
2006-05-26 11:35:22.76 server All rights reserved.
2006-05-26 11:35:22.76 server Server Process ID is 1868.
2006-05-26 11:35:22.76 server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL$MSFWLOGERRORLOG'.
2006-05-26 11:35:22.85 server SQL Server is starting at priority class 'normal'(2 CPUs detected).
2006-05-26 11:35:23.65 server SQL Server configured for thread mode processing.
2006-05-26 11:35:23.68 server Using dynamic lock allocation. [500] Lock Blocks, [1000] Lock Owner Blocks.
2006-05-26 11:35:24.01 spid3 Starting up database 'master'.
2006-05-26 11:35:24.31 spid3 Error: 9003, Severity: 20, State: 1.
2006-05-26 11:35:24.45 spid3 Cannot recover the master database. Exiting.
THX
MaX
Hi All,
I'm stuck with "Error: 9003, Severity: 20, State: 1" in MS-SQL Server 2000..I dont want to re-install the sql server ..since..i have other dependent s/w..!
I guess..the Master DB is corrupted....!!
When I tried to rebuild the Master db, i dont find the exe for rebuilding....it...!!
================================================== =======
Error log:
--------
C:Program FilesMicrosoft SQL ServerMSSQLBinn>sqlservr -c -T3608
2005-12-05 09:56:50.81 server Microsoft SQL Server 2000 - 8.00.760 (Intel X8
6)
Dec 17 2002 14:22:05
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2005-12-05 09:56:50.82 server Copyright (C) 1988-2002 Microsoft Corporation.
2005-12-05 09:56:50.82 server All rights reserved.
2005-12-05 09:56:50.82 server Server Process ID is 5548.
2005-12-05 09:56:50.82 server Logging SQL Server messages in file 'C:Program
FilesMicrosoft SQL ServerMSSQLlogERRORLOG'.
2005-12-05 09:56:50.84 server SQL Server is starting at priority class 'norma
l'(2 CPUs detected).
2005-12-05 09:56:50.88 server SQL Server configured for thread mode processin
g.
2005-12-05 09:56:50.90 server Using dynamic lock allocation. [2500] Lock Bloc
ks, [5000] Lock Owner Blocks.
2005-12-05 09:56:50.90 server Attempting to initialize Distributed Transactio
n Coordinator.
2005-12-05 09:56:52.93 spid4 Recovering only master database
2005-12-05 09:56:52.95 spid4 Starting up database 'master'.
2005-12-05 09:56:53.07 spid4 Error: 9003, Severity: 20, State: 1.
2005-12-05 09:56:53.07 spid4 Cannot recover the master database. Exiting.
Hi,
I am using Microsoft SQL Server 2000 Desktop Engine (MSDE 2000). When I restart the SQL Service, it fails to do so. I have tried running the service in command prompt & got the following error:
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.
Kindly help as it is quite urgent & I can not afford to loose any data. Thanks.
Hi All,
We have transactional replication between two SQL Server 2000, SP4 and database is in simple recovery.
Occassionally Logreader agent fails with error 9003 (The LSN (164051:119090:22) passed to log scan in database 'ReportDB' is
invalid).
But in April 2007 this error has occurred multiple times. We have opened the case with PSS in April 2007 but till now there
is no concrete solution.
Error details in ErrorLog:
2007-04-24 16:49:09.79 spid59 Error: 9003, Severity: 20, State: 1
2007-04-24 16:49:09.79 spid59 The LSN (164051:119090:22) passed to log scan in database 'ReportDB' is invalid..
Error details in Log reader agent:
Repl Agent Status: 3
Publisher: {call sp_repldone ( 0x000280d30001d1320016, 0x000280d30001d1320016, 0, 0)}
Publisher: {call sp_replcmds (100, 0)}
Status: 0, code: 0, text: 'The process could not execute 'sp_replcmds' on 'BR14D135R17'.'.
The process could not execute 'sp_replcmds' on 'BR14D135R17'.
Repl Agent Status: 6
Status: 0, code: 9003, text: 'The LSN (164051:119090:22) passed to log scan in database 'ReportDB' is invalid.'.
From above error details it can be seen that sp_repldone is already called for LSN 164051:119090:22 (0x000280d30001d1320016)
which means it is distributed.
Since LSN is distributed, transaction log of publisher for that LSN can be truncated by checkpoint process. And afterward if
logreader issues sp_replcmds for that LSN, we will get 9003 error.
So, question is why Logreader is looking for LSN if that is already distributed.
When checked "DBCC Opentran", it also reflect oldest distributed LSN as 164051:119090:22.
We tried changing the recovery model to FULL but that has only delayed the occurrence.
Once we have noticed that LSN mentioned in Error 9003 was already backed up one day before. And we don't think replication latency to be more than 3 hrs
(maximum).
After PSS recommendation, we have applied the hotfix 2187 but error has occurred again after one month.
Other recommendation is to disable read cache of hardware controller to avoid stale read(that we are working on). Current
setting is 100% read and 0% Write.
Other Details:
SQL Server 2000 Enterprise Edition SP4 with Hotfix 2187
Window 2000 Advanced Server.
RAID 5 with array controller as HP Smart Array 641 Controller
Please let me know if you have faced such issue and have any idea on this problem.
Thanks,
Ramesh
hello there,
Could someone help me with my server. I could not start SQLServerAgent.
and have an error message:
An error 1068 - (The dependency service or group failed to start.) occurred while performing this service operation on the SQLServerAgent Service.
The startup account for both MSSQLServer and SQLServerAgent is on Local System Account.
And on the SQL Error Log I got:
2008-03-01 14:50:12.89 server Copyright (C) 1988-2002 Microsoft Corporation.
2008-03-01 14:50:12.89 server All rights reserved.
2008-03-01 14:50:12.89 server Server Process ID is 164.
2008-03-01 14:50:12.89 server Logging SQL Server messages in file 'D:Program FilesMicrosoft SQL ServerMSSQLLOGERRORLOG'.
2008-03-01 14:50:12.90 server SQL Server is starting at priority class 'normal'(1 CPU detected).
2008-03-01 14:50:12.92 server SQL Server configured for thread mode processing.
2008-03-01 14:50:12.92 server Using dynamic lock allocation. [500] Lock Blocks, [1000] Lock Owner Blocks.
2008-03-01 14:50:12.93 spid3 Starting up database 'master'.
2008-03-01 14:50:12.96 spid3 Error: 9003, Severity: 20, State: 1.
2008-03-01 14:50:12.96 spid3 Cannot recover the master database. Exiting.
I thnik the SQLServerAgent won't start because the the ERROR 9003. May be my Db is corrupted.
Is there anyone that could help me?
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE="
&db_name & ";UID=" & db_username & ";PWD=" &
db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
I'm trying to link SQL Server 2000 sp3 to SQL 2005 64 bit. I keep getting Error 17 sql server does not exist or access denined. I tried adding remote user mapping and chaning the linked server properties to "Be made using this security context" without any success.
Any help is appreciated.
While I was out of the office the Lan Team moved one of my SQL Server2000 servers to a new network domain. Since then the maintenance jobhas not ran.The error log for the SQL Agents has the message listed in the subjectline. I have not found any useful articles on the MS SQL Serversite. Anyone know what might be wrong and how to fix it.HTH -- Mark D Powell --
View 4 Replies View RelatedI have searched and could not find an answer for this one I read log and it said
Starting Service ...
SQL_Latin1_General_CP1_CI_AS
-m -Q -T4022 -T3659
Connecting to Server ...
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
SQL Server configuration failed.
how do I fix this?
Hi i need help.,What does this error means and what should i do to fix it.BTW. i made a data driven site, using Visual Web Dev 2008, and i used the Sql Server 2000 enterprise all in the same PC, when i run it in my IIS also in the same PC, this error apear, please help me.thanks
Server Error in '/' Application.
Login failed for user 'P078731ASPNET'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Login failed for user
'P078731ASPNET'.Source Error:
Line 2679: this.Adapter.SelectCommand = this.CommandCollection[0];Line 2680: Red.acoDataTable dataTable = new Red.acoDataTable();Line 2681: this.Adapter.Fill(dataTable);Line 2682: return dataTable;Line 2683: }Source File:
c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET
Files
oot9c387db932ec7141App_Code.v1ipo9zs.0.cs Line: 2681
Stack Trace:
[SqlException (0x80131904): Login failed for user 'P078731ASPNET'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162 System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107 RedTableAdapters.acoTableAdapter.GetData() in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot9c387db932ec7141App_Code.v1ipo9zs.0.cs:2681[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.WebControls.ListControl.OnDataBinding(EventArgs e) +92 System.Web.UI.WebControls.ListControl.PerformSelect() +31 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +26 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
Version Information: Microsoft .NET Framework Version:2.0.50727.1433;
ASP.NET Version:2.0.50727.1433
Hi
I just installed SQL Server 2000 EVAL ver, in my Win XP Pro machine and the installtion was succesful though I get the following error once I run the code.
What does this mean ? What should I do here ?
----------------------------------------------------------------------
[SqlException: Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +472
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +311
System.Data.SqlClient.SqlConnection.Open() +383
ASP.DropDownList_aspx.Page_Load() +61
System.Web.Util.ArglessEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +10
System.Web.UI.Control.OnLoad(EventArgs e) +55
System.Web.UI.Control.LoadRecursive() +27
System.Web.UI.Page.ProcessRequestMain() +731
Hi,
I have a question to the SQL Server experts.
I have a kind of problem with an system that is trying to modify some records in a SQL Server 2K Database.
Server configuration:
Windows Server 2003 Standard Edition
MDAC 2.81 SP2
SQL Server 2000 SP3
The error that I receive is:
Description [Timeout expired], NativeError [0] SQLState [HYT00], Source [Microsoft OLE DB Provider for SQL Server], Number [-2147217871]
It happens when I try to execute a store procedure that updates a record and is just with that procedure, there's no error when I execute procedure to insert rows.
I would feel so much thankful about any suggestions.
I installed the DevInfo 5.0 web software on our server and followed the configurations instructions accordingly.
Now we have a problem of accessing the application from both the server and the client.
I am getting the following error message:
Server Error in '/DI5Web' Application.
--------------------------------------------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
We do not have SQL Server 2005 but SQL Server 2000
Any assistance will be highly appreciated
Hi guys im new on this Forum
and a NOOB @ SQL
Recently one of our clients had power interruptions and they are now getting this error on there SQL. Wondering if you guys can give some input here.
Unfortunately there is no Backups availible!
Error is as Follows:
Error 9003,severity 20 state 1
(9:307:1) passed to log scan in database 'model' is invalid
Due to this the ISA server2004 wont start either.
Any Help please?
How to fix error 207 in ms sql server 2000 with out applying SP4service pack 4,on SQL SERVER 2000 wit sevice pack 3a - currentenvironment ?
View 1 Replies View RelatedHi All,
I am trying to connect to SQL Server 2000 database from my VB6 code. The SQL Server is having the setting ON to force all incoming connections to use SSL. It is using a valid certificate with the same name as FQDN of the server and has been provided by the security department in my organization. I have got my client code on my desktop.
I have installed the root CA certificate for the SSL certificate on DB server in my desktop's Trusted Root Certificates.
When I try to access the database from my .NET 2.0 code, it works fine. The .NET code gives an error if I remove the CA certificate from my desktop. This behaviour is as expected. I am using Encrypt=True setting in my code here although I dont think it is necessary when server is forcing all to use SSL anyway.
However, I have got some VB6 code as well on my desktop trying to connect to the same database. The code works fine if I dont use Encrypt=YES in my connection string here. This works fine even when I dont have Encrypt=YES and I have removed the root certificate from my desktop; which is strange because I expect it to give me an error like my .NET code as server is forcing all connections on SSL only.
But, if I do use Encrypt=YES in my connection string here, I am getting an error on conn.Open step. The exact message is Run-time error "-2147467259(80004005)":[Microsoft][ODBC SQL Server Driver]SSL Security error. I get this error both when I have the certificate installed and when I dont have it. I have tried using FQDN of the server in my connection string instead of IP Address.
The connection string is : "Driver={SQL Server};Server=X.X.X.X;Database=dbname;UID=sa;PWD=;Encrypt=YES".
The code I have is pasted here;
Dim conn As New ADODB.Connection
conn.ConnectionString = GetConnectString
conn.Open
The MDAC version on my desktop is 2.81.1117.0
Please advise.
Thanks and Regards,
-Ajay Kumar Suri
Hi all.I am working on asp.net 2.0 with back end as sqlserver 2000. but when trying to connect to the database i am getting the following error displayed An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: An error has occurred while establishing
a connection to the server. When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not
open a connection to SQL Server)Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +115 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +1093 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +1083 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +272 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +351 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +82 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +558 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +126 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +651 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +160 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +122 System.Data.SqlClient.SqlConnection.Open() +229 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +114 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +225 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +157 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +68 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +100 System.Web.UI.WebControls.Login.AuthenticateUsingMembershipProvider(AuthenticateEventArgs e) +100 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +113 System.Web.UI.WebControls.Login.AttemptLogin() +178 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +134 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +107 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +178 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +72 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3837
Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.42 can anyone help??????????? regardspravallika
Error 7302: Could not create an instance of OLE DB provider 'SQLOLEDB'. OLE DB error trace [Non-interface error: CoCreate of DSO for SQLOLEDB returned x8007007f].
CASE:
I created a link server from SQL Server 2000 to FoxPro database using vfpoledb driver. SQL server and FoxPro database are NOT being run on the same machine.
Server1 - SQL Server 2000 (I created the link server which connects to Server2)
Server2 - FoxPro database
TROUBLESHOOT
When I test the link server on the machine which has FoxPro database , It is working with no problem.
PROBLEM STATEMENT:
When a user machine sends a query to Server1/Link Server, it is getting Error:7302
Please help me.
I am trying to make a simple connection to my sql server, but am getting an error. I am not sure why it says SQL Server 2005 in the error as we use 2000. I have found others to have the problem on the web, but have found no answers. One person said the sql connection worked when he downgraded to 1.1; however, I'd like to avoid that. Here is my code:
<%@Import Namespace="System.Data.SqlClient" %>
<script runat="server">
Sub Page_Load()
Dim conNorthwind As SqlConnection
conNorthwind = New SqlConnection("Server=1CDRSRV4; uid=username; pwd=password; database=Northwind")
conNorthwind.Open()
End Sub
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
Connection Opened!
</body>
</html>
here is my error:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)Source Error:
Line 6:
Line 7: conNorthwind = New SqlConnection("Server=1CDRSRV4; uid=sa; pwd=sa; database=Northwind")
Line 8: conNorthwind.Open()
Line 9: End Sub
Line 10: </script>Source File: C:Inetpubwwwrootchap2sqlconnection.aspx Line: 8 Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734995
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
ASP.chap2_sqlconnection_aspx.Page_Load() in C:Inetpubwwwrootchap2sqlconnection.aspx:8
System.Web.Util.CalliHelper.ArglessFunctionCaller(IntPtr fp, Object o) +5
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +783999
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Hello All,
I am not sure what is going on, but ever since I installed my ASP.NET shopping cart I keep getting the following error message in my Event Viewer under Application.
If anyone out there has any idea why this is happening please let me know because it seems to be crashing my other sites on my web server.
I have a Web Server which connects to a separate SQL 2000 Server. This error message is on my Web Server.
Thank you all in advance for your help!
Error:--------------------------------------------------------------------------------------------------------------------------
Event code: 3005 Event message: An unhandled exception has occurred. Event time: 1/6/2007 1:07:17 PM Event time (UTC): 1/6/2007 6:07:17 PM Event ID: 518a9db199214e3e807dd676e85f3d5a Event sequence: 103 Event occurrence: 6 Event detail code: 0 Application information: Application domain: /LM/W3SVC/1309570491/Root-1-128125656181152736 Trust level: Full Application Virtual Path: / Application Path: C:InetpubStoreV7 Machine name: CDMLWEB Process information: Process ID: 2376 Process name: w3wp.exe Account name: NT AUTHORITYNETWORK SERVICE Exception information: Exception type: SqlException Exception message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. Request information: Request URL: http://www.bestpricetags.com/default.aspx Request path: /default.aspx User host address: 207.38.200.139 User: c2e1ff27-e0ea-4c7f-ac61-5b1716651d3b Is authenticated: True Authentication Type: Forms Thread account name: NT AUTHORITYNETWORK SERVICE Thread information: Thread ID: 10 Thread account name: NT AUTHORITYNETWORK SERVICE Is impersonating: False Stack trace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at AspDotNetStorefrontCommon.DB.GetRS(String Sql) at AspDotNetStorefrontCommon.DB.GetSqlN(String Sql) at AspDotNetStorefrontCommon.AppLogic.IPIsRestricted(String IPAddress) at AspDotNetStorefront.Global.Application_AuthenticateRequest(Object sender, EventArgs e) in C:InetpubStoreV7App_CodeGlobal.asax.vb:line 103 at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Custom event details:
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I'm trying to configure ASP.NET2.0 Application to use SQL Server 2000 and yes i did make sure all my setup in configuration manager is setup and the surface area
Whenever i ran the REGSQL .EXE CMD it works until i get to where it suppose to give you a list of data instance to choose from base on ScottGu article in step 4
I'm running SQLEXPRESS ADVANCE
VWD EXPRESS 05
Thanks
ms sql server 2000
Everytime i start sql server agent i get the following error:
An error 1069 - (The service did not start due to a login failure.)
occurred while performing this service operation on the SQLServerAgent service.
What do i do to fix this??
I am using VWD with Sql Server 2000. My application was running smoothly till I rebooted both my local box and the Machine where sql Server 2000 resides and now I am getting this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
like I said before I am using Sql Server 2000 and not 2005. I don't really understand the problem. The application was running smoothly before rebooting it, so I know there is nothing wrong with the code. Maybe I need to start some service within IIS or something.
If anyone has any idea please let me know.
Thanks in advance for your help
Hello All,I am working in vwd using C#. In my web develpent I am Connecting to the Sql server 2000's pubs table and displaying result in GridView Control.My Coding is SqlConnection con = new SqlConnection("Server=local host;uid=sa;pwd=**secret**;database=pubs"); string str = "select * from authors"; SqlDataAdapter da = new SqlDataAdapter(str, con); DataSet ds = new DataSet(); da.Fill(ds); GridView1.DataSource = ds; GridView1.DataBind();his is a very simple Code.Now I got a error which isAn error has occurred while establishing a connection to the server.When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settingsSQL Server does not allow remote connections.(provider: Named Pipes Provider, error: 40 - Could not open aconnection to SQL Server)Can you tell me what is the problem hererajkumar sharma
Hi,
After installing SQL Server 2000 I receive this error from SQL Server Enterprise
Code:
A connection could not be established to SERVERNAME-fe421342.
Reason: SQL server does not exist or access denied.
ConnectionOpen(Connect())..
Please verify SQL Server is running and check your SQL Server registration properties
(by right-clicking on the SERVERNAME-fe421342) and try again.
I'm using XPSP2 installed programs are vs.net,dreamweaver8,mcaffee...do I have to tell all of them?
Hi All,
I'm running peoplesoft 8.8 on MS-SQL 2000 SP4. When I try to access my
peoplesoft application through web and add access some pages, I get some error like "SQL error. Stmt #: 651 Error
Position: 0 Return: 8601 - [Microsoft][ODBC SQL Server Driver][SQL Server]
fetch: The fetch type refresh not allowed with forward only cursors (SQLSTATE
37000) 16911
"
I need to solve this issue at the earliest.
Thanks in Advance,
Aniruddha.
Hi
I get the following error while trying to install sql server 2000 eval edition
on Win XP
> "An error occurred while creating one or more registry entries. Please
> see C:Windowssqlstp.log for details. The problem could be caused by a
> low registry quota condition."
How do i solve this :o
Hi
I got a small problem with Sql Server 2000 which is installed on Windows XP.
I installed it long back and it used to work fine but suddenly I got the following problem when trying to open Enterprise Manger
“Error for the SQL Server:
A Connection could not established to (Local)
Reason: SSL Security error Connection Open (SECDoClienthandshake())…”
Tried a couple of things but no luck
Hopeso someone can help me!
Thanxs
Lakshmi
dear sir, i have got an error in ms SQL server 2000 enterprise....which is installed on a win2003 enterprise system....
SuperSocket info: (SpnRegister) : Error 1355.
can you please tell me what it means??
regards,
Please any one can help me ?I have multiuser application ( VB 6.0 ) on SQL Server 2000 running.
Last night my Sql Server was writting info on the Log file of one database when the power accidentally shut down. In fact, the server was executing one Microsoft Data Transformation Service ( DTS ) which transfers data from one table to another.
This morning when the users tried to work with this database everything went wrong... I've not been able to attach MDF AND LDF files to SQL Server 2000 Desktop Engine.
Looking for what happened I found those Info/Error LOG events:
A)Starting up database 'pcserveis'.
B)ex_raise2: Exception raised, major=34, minor=48, severity=21, attempting to create symptom dump
C) "The transaction ( Process Id 5 ) was left in "interblockade" in Lock
resources with another process and was chosen as subject of the "interblockade". Execute the transaction again." ( Sorry about wrong words , i'm using a translation tool from spanish )
D) Could not undo log record (5019077:221:133), for transaction ID (0:15254626), on page (1:1917), database 'pcserveis' (database ID 11). Page information: LSN = (5019072:426:5), type = 1. Log information: OpCode = 2, context 1.. ( Error: 3448, Severity: 21, State: 1)
E)Error while undoing logged operation in database 'pcserveis'. Error at log record ID (5019077:221:133).. (Error: 9004, Severity: 23, State: 7)
F)An error occurred while processing the log for database 'pcserveis'..
What can i do to restore my database? Thanks