Hi Dear Friends
I have the sql server2000 that I have installed it on the windows server 2000
My server has 4 GB of RAM but i now can use only 2 GB of RAM.
How can i adjust the server for using total of RAM.
Best Regards Ahmadreza.
Can someone please explain what the tempdb database is responsible for in SQL Server 2000. The database and log file has grown extremely large and I cannot backup this table for some reason. Thanks.
View 1 Replies View Relatedsql server 2000I am currently maintaining a table that contains 30 Million+ records,30 columns, and 11 indexes and will double within the next six mouths.The application that accesses this table, mainly for read onlypurposes, runs without any problems. We have begun using Crystalreports and are now having problems. When we create reports thataccesses the large table our server has significant performance dip.The application begins to time out and the reports take a very longtime, even with simple selects on indexed field.I have began looking into partitioning the large table on its key fieldand creating a partition view. But from what I have read this willonly help if we key on the partitioned field. And all other searcheswill actually take a little longer.Archiving old data is not an option. All the data is being usedAny suggestions will be appreciated. Thanks in advance.Rick
View 1 Replies View RelatedCould someone here clarify the difference between replication and mirroring?
What I want to do is to be able to make a back-up of my database to a different computer, what are the things I need to do? Is it replication or mirroring?
TIA
Hello,
I am just getting started with SQL 2000 Server, and we have our database online, and starting transfer all the data from ACCESS to SQL 2000.
Need to know what type of maintenance I need to do to keep the data clean on SQL.
Any help would be appreciated.
Calling all those that use Maintenance Plans.
There are some perculiar goings on happening on my servers. Plans across servers have been doing funny things like dumping back ups in different folders, some jobs have been hanging, so on and so forth.
And I think it's occuring after modifying SQL Server 2000 plans with SSMS. It's so intermitent, it's hard to put my finger on exactly when it's happening. It may have not even been reported yet. Fixing the anomolies are achieved by recreating the jobs (a matter of unticking and ticking the boxes in the Maintenance Plans).
In SQL 2000, if you create more than 1 schedule on a job that was itself created using a maintenance plan, SQL Server returns a message along the lines of "Dude, do this and weird things might happen". The message doesn't say what exactly, just that it can no longer guarentee the integrity of the plan. And indeed, weird things does happen, I tested it once.
I'm guessing this is a similar problem, but has not yet been pinned down. Has anyone come across this when using SSMS to maintain 2000 plans.
At this stage, I would like to point out that this is not a slagging off Maintenance Plans thread... I'm looking in the direction of anyone who's name starts with the letter Kristen or Tara
Drew
"It's Saturday night; I've got no date, a two litre bottle of Shasta, and my all-Rush mix tape... LET'S ROCK."
I want to know if there is a "best-practice" for setting up DatabaseMaintenance Plans in SQL Server 7 or 2000. To be more specific, I wantto know the order in which I complete the tasks. Do I completeoptimization first, then integrity checks, then translog backup, thenfull backup??? OR is there a better order which should be used?Should I ALWAYS backup the transaction Log before I complete a fulldatabase backup, and if so, why??If someone can help, it would be great.....
View 2 Replies View RelatedI was once told that I was not to use the GUI to setup a maintenance plan. What the person said was that I needed to setup a different plan to do each tab of the GUI instead of going through the tabs and making sure the times do not overlap.
Has anyone ever heard of this or is this an old wise tale told by only one person?
I am using version 8 of SQL on XP machines with 8 connections to that database and need to back up the database, clean it up and everything the GUI has, so teach me the correct ways and tell me why, thanks!
Hi,
I'm working with SQL 2000 and am just learning about Maintenance Plans (MP). They seem convenient, but after some time, I'm wondering if they're the best approach long-term. Here are my experiences.
Using the MP Wizard, I created a plan with tasks from all the dialogs:
- Optimize database
- Check integrity
- Backup database
- Backup transaction log
- Write a report
I was puzzled to find 4 jobs were created, each with just 1 step, and staggered starting times. I expected to find 1 job with 4 steps. So, brimming with confidence, I did just that. I combined all 4 into 1 job, deleted the 3 other MP created jobs, and checked for any job-specific details in the code. However now when I open the MP, I get this pop-up:
"One or more of the jobs created for this plan has had additional steps added to it. It is not recommended that jobs created by the maintenance plan be modified in any way."
Okay, fair warning. Yet it appears the job and all steps run successfully, both on demand, and on a schedule. So now I'm wondering if jobs always need a MP. If I don't mind working with xp_sqlmaint syntax, it appears the only thing I'm giving up is the MP history. But I expect job history and '-WriteHistory' will minimize that loss.
I searched BOL, this Forum, and Google, and found a couple articles. One author preferred the ease of the Wizard, another preferred the control and added features of T-SQL, but both created a MP in their examples. So I'm hoping some experienced DBAs can advise.
If I create a job with multiple steps, and no MP, are there important things I give up or problems I create?
Is this approach a bad idea in SQL 2005?
At this stage, I don't need replication or other advanced features. Just simple database maintenance.
Thank you,
- Martin
Hi All
I€™m having a problem setting up maintenance plans on one of our SQL 2005 servers but first here€™s a bit of back ground.
The server is a Virtual machine running win2k3R2 SP2 server std and SQL 2k5, A supplier arrived to install and app on the server when discovering there app didn€™t work with 2k5 they seem to have set the 2 dbs on the server into 2k compatibility mode and set the entire SQL install to think its a 2000 install. (I€™m not sure how this is done all I can see is the wrong version number in management studio) The problem this is giving me it that the folder in management studio for Database Maintenance Plans is no longer under the management folder instead it under a sub folder called Legacy (which is how management studio seems to deal with all registered 2000 instances) and as such a can no longer right click and create new database maintenance plans is there any way around this or will I have to setup my backup job manually?
Ohh and have the supplier shot at dawn
Thanks All
Jon
We have some to-disk backups scheduled on our 2000 Enterprise machine - nightly fulls, hourly logs - that go to a network share located on another machine. They were originally stored directly on the same machine as SQL Server, but we changed them to a remote destination within the past few weeks. This works okay, but despite having the maintenance plan set to remove files older than 2 days, old files don't seem to be removed. Understandably, this gets to be a problem when the backup disk becomes filled.
Is there any obvious reason why this option wouldn't work against a network share? I've checked the directory permissions, and the SQL Agent domain account should have no trouble deleting the files.
Hello,
I have a question that I hope someone can clear up for me. I have come across a number of different suggestions on DB maintenance, for example reindexing with the following script:
USE DatabaseName --Enter the name of the database you want to reindex
DECLARE @TableName varchar(255)
DECLARE TableCursor CURSOR FOR
SELECT table_name FROM information_schema.tables
WHERE table_type = 'base table'
OPEN TableCursor
FETCH NEXT FROM TableCursor INTO @TableName
WHILE @@FETCH_STATUS = 0
BEGIN
DBCC DBREINDEX(@TableName,' ',90)
FETCH NEXT FROM TableCursor INTO @TableName
END
CLOSE TableCursor
DEALLOCATE TableCursor
My question is, doesn't the maintenance plan have this functionality inherent in it when you create the maintenance jobs to reindex? Is there a benefit to scripting things out vs just using the maintenance plan wizard for this sort of thing and any of the items it covers? I came from an Oracle background where this was a no-brainer but I am a bit confused on the choices with SQL Server.
Thanks.
I have been having an extremely annoying problem with SQL server. About 3 to 4 time a day, it starts running some job that takes 30+ minutes to finish. The problem is that it bogs the system down, and consumes so many resources, that it it is almost impossible to run anything while the job is running. Most of the time, this job runs when the server is idle. And, much of the time, it has been idle for at least 30 minutes, and often longer. Also, there is excessive hard drive activity while this task runs.
I am unable to find out what is going on because Enterprise manager times out trying to connect to it, and other tasks remotely connecting either time out or get a network error trying to connect. I have task manager running all the time and it shows task 'sqlservr.exe' hogging the system when this is happening.
Can anyone shed any light on what is happening, why, and how I can stop this?? If it is performing maintenance, is there a way to get it to schedule this for specific times rather than during normal idle system activity?
Hello everyone,
I was interested in finding out if anyone knows any helpful websites, articles, and/or postings for recommendations on server maintenance.
Maintenance such as defrag, logging...and so on. Our company has a good backup system but we would like to improve on everything else (basic/advance maintenance).
If you have any best practices secrets or know of any good resources, it would be much appreciated to hear from you. If you need more info, just let me know. We have SQL Server 2005.
-Cindy.
In SQL 2008 R2, if we clone an environment including SQL server, the maintenance plans retain a connection string to the source/original server they got cloned from and are not editable. But, I was able to use a work around by editing them in BIDS and saving them back on the server. But now with 2014, I am facing two issues:
1.I still can edit the package to correct the server connection, with SSDT; but the option to save back to the server is not available any longer!
2.I used to be able to see all my plans under SSIS in 2008 R2 but not in 2014 now. Although, they are listed in SSMS!
A year ago one of our SQL Server 6.5 servers was upgraded
to SQL Server 7.0 sp1. My compatibility level still shows
6.5, however. The SQLAgent has been using the 'localsystem'
account up until earlier this week. I changed the login
to be a domain account with System Administrator
permissions and removed the SA permissions from the
BuiltinAdministrator group. (My ultimate goal is to limit
the access NT Administrators have within my SQL databases.) All of my scheduled jobs run without error except the maintenance plans. (All
jobs have an owner of sa.)
The errors that I receive are permission errors-not being able
to get into tables on the MSDB database. However, if I open
Query Analyzer with the SQLAgent domain account and perform
a select on one of the tables in MSDB, it is successful. If I give
the BuiltinAdministrator account the SA permissions again
while still keeping the SQLAgent using the new domain account,
the maintenance jobs succeed.
Is this an upgrade problem since I do have other SQL 7.0 servers
that don't have this problem? How can I correct this?
Thank you!
Toni
After looking through the archives at database maintenance steps used by others, I have decided on the following steps for each of my SQL Server 7.0 databases. I have set up a maintenance plan where they would execute in the following order for each database, if the preceding step is successful. If the preceding step fails, the job quits.
dbcc checkcatalog ('master')
dbcc checkdb ('master')
backup database master to master_dump with init, name = 'ASP Master dump'
dbcc dbreindex ('master', '', 70)
dbcc shrinkdb ('master', 10)
Now my questions...
1. The checkcatalog, checkdb, backup database, and shrinkdb commands appear in blue in SQL Server 7.0 to seemingly indicate they are commands. However, the dbreindex command is black. Does this mean that it is not recognized as a valid command? If so, why not? It is shown as a valid command in the Microsoft Knowledge Base.
2. The value of 70 in the dbreindex command was the value shown in sample code in the Microsoft Knowledge Base. However, the Knowledge Base does not give any guidance on whether this is a good value or not. How should I make a decision on what value to use? The value of 10% for the shrinkdb command is also just a sample value from Microsoft. How does one know what value to choose?
If anyone thinks this is a poor selection of maintenance steps, please let me know that also.
Thanks!
Joe Meyer
Hi,
I'm researching on how to maintain RS SQL server database or what is the best way to maintain ReportServer and ReportServerTempDB? Should I go for the automatic shrink facility of SQL Server? Any suggestion? Thanks.
Hey Gang, Anyone have a Maintenance Plan Checklist? One that I can use on Multiple applications
View 3 Replies View RelatedI am trying to set up a maintenance plan is SQL Server. I set one up to query one of my very small tables for testing purposes. I made sure that I have the server entered in correctly and also verified that I needed to make sure that I have both TCP/IP and Named Pipes both enabled. However, everytime I set something up and try to execute it. The plans ends up failing. This isn't a hard process but something else isn't setup that needs to be. Does anyone have any ideas pertaining to this.
Is there a special credential that needs to be setup for this?
Any help on this would be great. Thanks
Hi, I'm a novice user of SQL Server.
I'm using Win SBS R2 2003 with SQL Server 2005 Workgroup Edition, and the database have been up and runnning now.
I was wondering whether I can perform a backup database from the workstation computers or not? That would mean I login as domain users and using the SQL Server Management Studio (located in the server), I will perform the particular database that I wish to backup... Can this be done? If so, perhaps someone could tell me how (step by step procedure) or is there a document about this?
Thanks!
I have about 15, 100mb databases on my SQLserver and was wondering if my db maintenace plan was correct. I backup the db once a day, and the Transaction log gets backep up every four hours. I am also using the "Bulk-logging" option for each database. My main concern was if I ever do a manual backup of one of the dbs, will it corrupt my backup history and stop me from restoring a db sucessfully. Would simple logging be a "safer" option? I just want to have the most reliable plan in place. I would appreciate any wisdom.Thanks.
View 7 Replies View RelatedI'm trying to create a maintenance plan to backup a database, and when I go to select the database in the dropdown, I don't have any of the user databases any more. They were there several weeks ago when I first created the 'plan'.
Does anyone know how to get the user db's to show up in the dropdown?
I've heard from several sources that there are issues using the maintenance wizard with 7.0 & 2000 databases. I'm looking for information to either support or refute this. Can anyone help?
View 2 Replies View RelatedCan someone tell what could possibly be the problem with SQL7 not running backups that were created and scheduled using the maintance plan wizar. There is no job history, or any record of the backups running. However, I did notice that the SQL Server Agent was set to manual. Could that perhaps have something to do with the jobs not running. If possible could some give me possible solutions or answers as to why these jobs didn't run.
Thanx
Hello, everyone:
I have a strange trouble on SQL Server 2005 on XP/local and Win 2003/server. When I connect local database and create a backup plan named by "backup plan", I can see the name under "maintenance plan" and "Jobs" under SQL Server Agent. But if I connect to server database and do the samething, I cannot see the name under "maintenance plan". I can see the name under "Jobs" under SQL Server Agent. But cannot delete this job, and message:
Drop failed for job "Backup Plan".(Microsoft.SqlServer.Smo).
Did someone meet this bug and have suggestions?
Thanks
ZYT
Afternoon All,
We have a SQL Server 2005 instance that I am running a few databases on, nothing too big though.
CRM-3.0
GFI-Network Monitor Database
Future Use
Solomon, and Sharepoint
The goal is to have all of our databases running on one server for backup and maintenace. Currently we are using VMWare to hose all of our servers and we use nightly scripts to backup all of the data. So backups are good to go.
What I am most concerned about is preventative maintenance on the databases. What would people recommend that I set-up for nightly, weekly, or monthly cleaning, integrity checks, etc? Are there third party tools that would do a better job? I am fairly naive on SQL server so any help would be greatly appreciated.
Joe
If your principal fails and your mirror assumes the main role and it is in Full recovery mode (which it has to be in Standard edition), then the log files will grow and grow until a transaction backup and shrink is executed.
I have maintenance plans running daily (and hourly for transaction log backup/shrink) on my principal, but nothing on my mirror.
Do I need to set up the same maintenance plans on my mirror server???
Thanks
Ed
I learned how to make SQL database BACKUPs through Maintenance Plans in SQL server 2005 in my own computer.
So my question is: When I finally would be deploying my ( asp.net 2.0) web site in a distant real server, how could I set a Maintenance Plan there ?
I created a database maintenance plan on sql server 2005 (standard SP2, cluster environment). The plan created successfully on scheduled successfully. But when execute the plan, it fails. Here is the information in the log:
The last step to run was step 1 (TranLog backup).,00:00:01,0,0,,,,0
09/19/2007 12:06:38,Tranlog backups.TranLog backup,Error,1,LAIWWORKSITE1LA,Tranlog backups.TranLog backup,TranLog backup,,Executed as user: STROOCKSQLSRV. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 12:06:38 PM Warning: 2007-09-19 12:06:39.27 Code: 0x80012017 Source: Tranlog backups Description: The package path referenced an object that cannot be found: "PackageTranLog backup.Disable". This occurs when an attempt is made to resolve a package path to an object that cannot be found. End Warning DTExec: Could not set PackageTranLog backup.Disable value to false. Started: 12:06:38 PM Finished: 12:06:39 PM Elapsed: 0.688 seconds. The package execution failed. The step failed.,00:00:01,0,0,,,,0
Any ideas? Thanks.
I am using SQL server 7.0. After restoring all the databses (Exceptdistribution) Everything seems to be working fine except the backupmaintenance plan. I put following detail in the maintenance plan"General Tab:Plan Name --- DB Maintenance Plan1() All DatabasesOptimizations tab:Reorganize Data and Index PageChange free space per page percentage to 10%Remove unused space from database filesShrink Database when it grows beyond 50 MBAmount of free space to remain after shrink 10% of the data spaceSchedule: Occurs every 1 week(s) on Thursday, at 1:30:00 PM.Integrity tab:Chack database integrityInclude indexes.Attempt to repair any minor problemSchedule : Occurs every 1 week(s) on Thursday, at 1:00:00 PM.Complete Backup tab:Backup the database as part of the maintenance planVerify the integrity of the backup upon completionDisk use this directory: d:SQL BackupsBackup file extension: BAKSchedule: Occurs every 1 day(s), at 2:10:00 PM.Transaction Log Backup tab:schedule: Occurs every 1 day(s), at 2:00:00 PM.Reporting tab:Write report a text file in Directory: D:SQL BackupsLOG "Problem:My databases(mroduction as well as systems) sre not at all gettingbacked up according to above plan.Error Message in the Log Directory:"Microsoft (R) SQLMaint Utility (Unicode), Version [Microsoft SQL-DMO(ODBC SQLState: 42000)] Error 4062: [Microsoft][ODBC SQL ServerDriver][SQL Server]Cannot open user default database '<ID>'. Usingmaster database instead."In the SQL server registration properties the login through whichgetting logged into the EM for that, default database is "my productiondatabase".Is this problem because of the distribution db which I am not able torestore.Please helpDeepak Sinha
View 1 Replies View RelatedHi there,
We have lately experianced a strange problem with our SQL Server 2005 x64 (SP2) that is NOT consistent but when it happens it happens on the same time.
Almost every night at 03:30 one of our databases (not all) seems to be down or locked. When i have a look at the order table in this database I can see that we have stopped recieving orders after 03:30. Two hours later (05:30) I can see the following error each minute in the error log until we reboot the server:
All schedulers on Node 0 appear deadlocked due to a large number of worker threads waiting on LCK_M_IS. Process Utilization 0%%.
As we have a maintenance job running at 03:30 it feels like this is the problem. The job performs the following tasks: "Check Database Integrity -> Rebuild Index -> Reorganize Index"
When i look at the history of the job it looks like it's not completed and only the "Check Database Integrity" task was runned. No error message here either.
Also when i look in the error log i can see that the Maintenance job is started but never ended. Worth to notice is that I get the follwoing info in the log after the start-message:
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Also, when i run this job manually daytime it works great!
Anyone having any idees on this? Is it possible to track this even more? I'm tired of restarting the server 03:30 in the morning =)
Thanks
Jon
Hello,
I use SQL Server Express 2005 SP2.(Microsoft SQL Server 2005 - 9.00.3042.00)
I want to make a maintenance plan, but I don't have a task called "maintenance plan"
I am user sa with "sysadmin"
How can I make a maintenance plan.
Thanks for your help
Thomas