As an 'SA' I thought that you have permission to do anything on the server. Running an update command from Query Analyzer is throwing this error:
SQL Server 2000 SP3
Server: Msg 18456, Level 14, State 1, Line 1
Login failed for user 'sa'.
The table is in the dbo schema.
Has anyone seen this error before?
Hi,
Last night I setup my MOSS 2007 server and SQL 2005, I got everything working fine in short order.
I had forgotten to look for updates for SQL 2005 so i decided I would run Windows Update.
SQL Server 2005
Critical Update for SQL Server 2005 Service Pack 2 (KB 934458)
Tuesday, March 04, 2008
Microsoft Update
SQL Server 2005
Microsoft SQL Server 2005 Service Pack 2 (KB 921896)
Those two updates were applied, then after a reboot I began getting the login failed error.
I can login using windows authentication as DOMAINAdministrator, I can also login as SA, but i am trying to figure out why it is denying me logins as DOMAINSharepoint
Has anybody had prior experience with this or know what the deal is?
TIA,
-Drew
Hello.
I get this error when I try to connect to my SQL Server with JDBC:
Excepcion en MyPool Pool.getNewConnection() [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Cannot open database "lituania" requested by the login. The login failed.
And in the ERRORLOG I get:
2002-02-22 19:59:46.62 Logon Error: 18456, Severity: 14, State: 16.
2002-02-22 19:59:46.62 Logon Login failed for user 'frontend'. [CLIENT: 10.0.0.75]
I found it is supossed to be a password mismatch:
http://blogs.msdn.com/sql_protocols/archive/2006/02/21/536201.aspx
but I checked the password is correct.
Any ideas? Thank you in advance.
A user is trying to connect to a server via windows authentication from SQL management studio on her desktop.
The log file on the server gives:
Login failed for user: domain1user1
Error : 18456, Severity: 14, State: 11
The strange thing is that the user in the error above is not the user she's trying to connect as (domain2user2, say).
user2 can remote desktop to the server and log in there.
I know this state implies "Valid login but server access failure".
Has anyone run into this, and what more information would be useful to know? Thanks!
Hi All,
I get below error when I try to logged into my web site.
Error: Login failed for user 'username'
Below is the event log at that time.
Error: 18456, Severity: 14, State: 8.
my web site working fine since last 5 months & from yesterday i was getting this error.
the thing is, the behavior of this error is not consistent.
Appreciate your help.
Below is the strack trace:
Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at User..ctor(String vzid)
thanks in advance,
prashant
Hi,
can someone help me with this error.
Error: 18456, Severity: 14, State: 16
Login failed for user 'NT AUTHORITYSYSTEM' [CLIENT:<local machine>]
I've found several Threads but not with the NT AUTHORITYSYSTEM.
Thanks for help.
Jens
We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
I have a stored procedure that takes 18 hours to complete. SometimesI get the below error message when I run the stored procedure.'Server : Msg 9002, Level 17, State 6, Line 1 The log file fordatabase 'Customer' is full. Back up the transaction log for thedatabase to free up some log space.'.I checked my log file and it is not full. And I don't know why I amgetting this message. Any help is appreciated.Thanks,Anjula
View 2 Replies View RelatedI just upgraded SQL Server 2000 to 2005 without any errors. Afterwards, I tried registering with sa and it failed. I registered with another sysadmin login to get into most of my databases, but I need sa to work for my backup software Idera SQLSafe to login to the database.
Does anyone have any experience or recommendations? I know my password is correct.
Mindy
Please help I keep getting this message when I log on to my data base. Not sure what state 1 relates too
TITLE: Connect to Server
------------------------------
Cannot connect to <server_name>
------------------------------
ADDITIONAL INFORMATION:
Login failed for user <user_name>. (Microsoft SQL Server, Error: 18456)
------------------------------
BUTTONS:
OK
------------------------------
Server Name: <server~name>Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
hi,
i am getting the following error message while i am trying to login to the SQL Server 2005 on my vista laptop. i installed the server with dual authentication modes.
Login failed for the user'xxxx'(Microsoft SQL Server 2005. Error:18456)
if you have solution for my problem please send a reply as early as possible.
thanks,
ravi kishore.ch
Hi,
I am trying to create a linked server between 2 SQL Server 2005 boxes.
When I create the linked server I specify a login for the connection.
The strange part is that I get the following error when it goes to test the connection:
The test connection to the linked server failed
Login failed for user 'Domainuser'. (Microsoft SQL Server, Error: 18456)
I can use the SQL mangement studio to conenct to the database using this same login.
The login has all the server roles assigned to it also.
Can anyone shed some light as to what may be the problem?
Thanks,
I'm getting a specific error when i try to run a .sql script for a Custom TableProfile from the Asp.net site,when i Parse the .sql file Commands execute perfectly. But when i actually "Execute" the .sql script i get the following errors::
Msg 15151, Level 16, State 1, Line 5
Cannot find the user 'WYATT-PCWyattASPNET', because it does not exist or you do not have permission.
How can i fix this??
Thxs in Advance Rattlerr
Simple SQL Error Can anyone help for a new starter. Error MessageServer: Msg 209, Level 16, State 1, Line 6 Ambiguous column name 'CustomerID'.Codeselect CustomerID, ContactName, OrderId from CustomersInner Join Orders OnCustomers.CustomerID = Orders.CustomerIDDBMS = SQL Server 2000 SP 3aDatabase = NorthwindI have no idea why i receive this error
View 1 Replies View RelatedHi, I would appreciate your help. I donot know why I am getting this error when I run this query :
if (select SUBSTRING(de_ftpdownload,1,CHARINDEX('.',de_ftpdow nload,0)-1)as de_ftpdownload from vendor_invoice)
<> (select stamp_number from vendor_invoice)
select 'no'
else
select 'yes'
I get this Error
Server: Msg 536, Level 16, State 3, Line 1
Invalid length parameter passed to the substring function.
----
yes
(1 row(s) affected)
I would appreciate your hlep
Al
Can anybody help me with this syntax?
select
PHN.N_PHN_ID 'ID',
PHN.N_PHN_AREACD 'AREAD1',
PHN.N_PHN_PREFIX 'PREFIXD1',
PHN.N_PHN_NUMBER 'NBRD1',
PHN.N_PHN_EXTENTN 'EXTD1',
PHN2.N_PHN_AREACD 'AREAD2',
PHN2.N_PHN_PREFIX 'PREFIXD2',
PHN2.N_PHN_NUMBER 'NBRD2',
PHN2.N_PHN_EXTENTN 'EXTD2'
from Donor_Visit2 DV2 RIGHT OUTER JOIN NAT_PHN_DB_REC PHN
ON DV2.COUNT_INSTID = PHN.N_PHN_INSTID
RIGHT OUTER JOIN NAT_PHN_DB_REC PHN2
ON DV2.COUNT_ID = PHN2.PHN.N_PHN_ID
order by PHN.N_PHN_ID
here is the error message:
Server: Msg 107, Level 16, State 2, Line 1
The column prefix 'PHN2.PHN' does not match with a table name or alias name used in the query.
Hello All,
This table was created by coldfusion and has been given all priviliges to public and I am in the public group but I still cant select from it. It gives me this error message: Server: Msg 208, Level 16, State 1, Line 1. Help!
Thanks in Advance.
If we run the query below with the values of 'rml' and 'ra' it runs but if we use 'cca' and 'cc' we get this error:
Server: Msg 1101, Level 17, State 10, Line 8
Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth.
Here is the query
Declare @Level_1 varchar(3),
@Level_2 varchar(2)
Select @Level_1 = 'cca'
Select @Level_2 = 'cc'
select distinct tblAsset.State, tblAsset.County, tblAsset.Plant, tblAsset.Account,
tblAsset.Acq_Yr, tblAsset.Acq_Pd, tblAsset_Book.Cost_Original,
tblCounty_Names.County_Name, CER..tblLocation.Location,
tblGL_Account.Account_Desc
from tblAsset, tblAsset_Book, tblCounty_Names, CER..tblLocation, tblGL_Account
where tblAsset_Book.Level_1 = @Level_1
and tblAsset.Level_1 = tblAsset_Book.Level_1
and tblAsset_Book.Level_2 = @Level_2
and tblAsset.Level_2 = tblAsset_Book.Level_2
and tblGL_Account.Company = tblAsset.Level_2
and CER..tblLocation.SBU = tblGL_Account.Company
and tblCounty_Names.County = tblAsset.County
and CER..tblLocation.County = tblCounty_Names.County
and CER..tblLocation.Code = tblAsset.Plant
and tblGL_Account.Account = tblAsset.Account
and tblAsset_Book.Book_Number = '1'
order by tblAsset.State
When I try to update one table from another I get the following error
message, Does anyone know what may be the cause of the error :
Server: Msg 8152, Level 16, State 9, Line 1
String or binary data would be truncated.
The statement has been terminated.
Thanks
KUL
Dear All participants.
My distribution log file size is reached upto 33GB, What I should do?
Any clue or helps are too appreciable.
Thanks
R.Mall
i have sp4 install. Anyone know how to fix it?
Server: Msg 2537, Level 16, State 43, Line 1
Table error: Object ID 1376776012, index ID 0, page (1:56868), row 2. Record check (Valid SqlVariant) failed. Values are 7 and 0.
Server: Msg 2537, Level 16, State 1, Line 1 ... so on
=============================
http://www.sqlserverstudy.com
Dear (and mighty) all:I backed up a database (SQL server 7.0) and tried to restore it onanother system (SQL Server 2000). This is not the first time I'm doingthis and never had a problem before:-- in the source dbBACKUP db_icoaraci TO DISK = 'C:TEMPBACKUP-ICOARACI.DAT'--in the destination dbRESTORE db_icoaraci FROM DISK='E:TEMPBACKUP-ICOARACI.DAT'WITH MOVE='ICOARACI_DAT' TO 'E:DBICOARACI.MDF',MOVE='ICOARACI_LOG' TO 'E:DBICOARACI.LDF'Today, to my surprise, the destination SQL returned the followingerror:Processed 25592 pages for database 'db_icoaraci', file 'ICOARACI_DAT'on file 1.Processed 1 pages for database 'db_icoaraci', file 'ICOARACI_LOG' onfile 1.Server: Msg 1105, Level 17, State 2, Line 1Could not allocate space for object '(SYSTEM table id: 6)' in database'db_icoaraci' because the 'PRIMARY' filegroup is full.Server: Msg 3013, Level 16, State 1, Line 1RESTORE DATABASE is terminating abnormally.I searched the list and a found a few posts refering to the same error,but none in the exactly same scenario.I tried to restore the database with NORECOVERY, and, before restoringthe log, increase its size (ALTER DATABASE ... etc), but SQL Serversays that the DB couldn't be open because it's in the middle of arestore...I'll appreciate any help.Regards,Branco.
View 3 Replies View RelatedI am experiencing some frustration in regards to parsing an email that I need to work with.
(I don't have control over the format of the email I am receiving)
Any help would be appreciated.
Thank you
Jake
Here is the error I get, when I use the SQL Query Analyzer to process my Stored Procedure. (Not every email gets this error, just some, others process just fine.)
String or binary data would be truncated.
The statement has been terminated.
Stored Procedure: eResponse.dbo.spParser
Return Code = -6
My Code is as follows:
CREATE PROCEDURE spParser
@_id nvarchar(50)
AS
--assumes the email is no longer than 4000 characters. if it might be longer, bump this number up.
-- Common Varriables
DECLARE @body nvarchar(4000)
DECLARE @i int
DECLARE @phone nvarchar(50)
DECLARE @phonestart int
DECLARE @phoneend int
DECLARE @email nvarchar(50)
DECLARE @emailstart int
DECLARE @emailend int
DECLARE @comments nvarchar(3000)
DECLARE @commentsstart int
DECLARE @commentsend int
DECLARE @OrigID varchar(50)
-- Jose Ole Variables
DECLARE @firstname nvarchar(50)
DECLARE @firstnamestart int
DECLARE @firstnameend int
DECLARE @lastname nvarchar(50)
DECLARE @lastnamestart int
DECLARE @lastnameend int
DECLARE @address1 nvarchar(50)
DECLARE @address1start int
DECLARE @address1end int
DECLARE @address2 nvarchar(50)
DECLARE @address2start int
DECLARE @address2end int
DECLARE @city nvarchar(50)
DECLARE @citystart int
DECLARE @cityend int
DECLARE @state nvarchar(5)
DECLARE @statestart int
DECLARE @stateend int
DECLARE @zip nvarchar(15)
DECLARE @zipstart int
DECLARE @zipend int
DECLARE @country nvarchar(50)
DECLARE @countrystart int
DECLARE @countryend int
DECLARE @phone2 nvarchar(50)
DECLARE @phone2start int
DECLARE @phone2end int
DECLARE @productname nvarchar(50)
DECLARE @productnamestart int
DECLARE @productnameend int
DECLARE @upccode nvarchar(50)
DECLARE @upccodestart int
DECLARE @upccodeend int
DECLARE @datecode nvarchar(50)
DECLARE @datecodestart int
DECLARE @datecodeend int
DECLARE @purchaseat nvarchar(50)
DECLARE @purchaseatstart int
DECLARE @purchaseatend int
DECLARE @purchasecity nvarchar(50)
DECLARE @purchasecitystart int
DECLARE @purchasecityend int
DECLARE @datepurchased nvarchar(50)
DECLARE @datepurchasedstart int
DECLARE @datepurchasedend int
DECLARE @dateopened nvarchar(50)
DECLARE @dateopenedstart int
DECLARE @dateopenedend int
DECLARE @subject nvarchar(50)
DECLARE @subjectstart int
DECLARE @subjectend int
-- Windosr Variables
DECLARE @name nvarchar(50)
DECLARE @namestart int
DECLARE @nameend int
DECLARE @company nvarchar(50)
DECLARE @companystart int
DECLARE @companyend int
--First replace all ASCII carriage returns and line feeds and assign the whole chunk of data to a variable.
SET @body = (select replace( REPLACE(convert(varchar(4000), message),CHAR(10),' '),CHAR(13),'') from message where mailid = @_id)
--below is the sample syntax for the individual replacements of line feeds and carriage returns, but it's combined into one statement above.
--SELECT REPLACE(@jb,CHAR(10),'') as firstpass
--SELECT REPLACE(@jb,CHAR(13),'') as secondpass
IF left(@body,47) = 'Fromubject:contact info sent from samplesite.com'
--If this is true.. then it is a sample company.
BEGIN
--The 12 in the start is compensating for the 12 Characters of "First Name: "
--Below is collecting First Name
SET @firstnamestart = (CHARINDEX('First name:',@body) + 11)
SET @firstnameend = (CHARINDEX('Last name:',@body) - 1)
SET @firstname = SUBSTRING(@body,@firstnamestart,@firstnameend-@firstnamestart)
----Below is collecting Last Name
SET @lastnamestart = (CHARINDEX('Last name:',@body) + 10)
SET @lastnameend = (CHARINDEX('Address 1:',@body) - 1)
SET @lastname = SUBSTRING(@body,@lastnamestart,@lastnameend-@lastnamestart)
--Below is collecting Address1
SET @address1start = (CHARINDEX('Address 1:',@body) + 10)
SET @address1end = (CHARINDEX('Address 2:',@body) - 1)
SET @address1 = SUBSTRING(@body,@address1start,@address1end-@address1start)
--Below is collecting Address2
SET @address2start = (CHARINDEX('Address 2:',@body) + 10)
SET @address2end = (CHARINDEX('City:',@body) - 1)
SET @address2 = SUBSTRING(@body,@address2start,@address2end-@address2start)
--Below is collecting city information
SET @citystart = (CHARINDEX('City:',@body) + 5)
SET @cityend = (CHARINDEX('State/Prov',@body) -1)
SET @city = SUBSTRING(@body,@citystart,@cityend-@citystart)
--Below is collecting state information
SET @statestart = (CHARINDEX('State/Province:',@body) + 15)
SET @stateend = (CHARINDEX('Zip/Postal',@body) -1)
SET @state = SUBSTRING(@body,@statestart,@stateend-@statestart)
--Below is collecting zip information
SET @zipstart = (CHARINDEX('Zip/Postal Code:',@body) + 16)
SET @zipend = (CHARINDEX('Country',@body) -1)
SET @zip = SUBSTRING(@body,@zipstart,@zipend-@zipstart)
--Below is collecting country information
SET @countrystart = (CHARINDEX('Country:',@body) + 8)
SET @countryend = (CHARINDEX('E-mail address',@body) -1)
SET @country = SUBSTRING(@body,@countrystart,@countryend-@countrystart)
--Below is collecting email information
SET @emailstart = (CHARINDEX('E-mail address:',@body) + 15)
SET @emailend = (CHARINDEX('Daytime',@body) -1)
SET @email = SUBSTRING(@body,@emailstart,@emailend-@emailstart)
--Below is collecting phone information
SET @phonestart = (CHARINDEX('Daytime Phone:',@body) + 14)
SET @phoneend = (CHARINDEX('Evening Phone:',@body) -1)
SET @phone = SUBSTRING(@body,@phonestart,@phoneend-@phonestart)
--Below is collecting phone2 information
SET @phone2start = (CHARINDEX('Evening Phone:',@body) + 14)
SET @phone2end = (CHARINDEX('Product Name',@body) -1)
SET @phone2 = SUBSTRING(@body,@phone2start,@phone2end-@phone2start)
--Below is collecting Product Name information
SET @productnamestart = (CHARINDEX('Product Name:',@body) + 12)
SET @productnameend = (CHARINDEX('UPC Code:',@body) -1)
SET @productname = SUBSTRING(@body,@productnamestart,@productnameend-@productnamestart)
--Below is collecting UPC Code information
SET @upccodestart = (CHARINDEX('UPC Code:',@body) + 9)
SET @upccodeend = (CHARINDEX('Date Code:',@body) -1)
SET @upccode = SUBSTRING(@body,@upccodestart,@upccodeend-@upccodestart)
--Below is collecting Date Code information
SET @datecodestart = (CHARINDEX('Date Code:',@body) + 10)
SET @datecodeend = (CHARINDEX('Purchased At',@body) -1)
SET @datecode = SUBSTRING(@body,@datecodestart,@datecodeend-@datecodestart)
--Below is collecting Purchase At information
SET @purchaseatstart = (CHARINDEX('Purchased At',@body) + 26)
SET @purchaseatend = (CHARINDEX('Purchase City:',@body) -1)
SET @purchaseat = SUBSTRING(@body,@purchaseatstart,@purchaseatend-@purchaseatstart)
--Below is collecting Purchase City information
SET @purchasecitystart = (CHARINDEX('Purchase City:',@body) + 14)
SET @purchasecityend = (CHARINDEX('Date Purchased',@body) -1)
SET @purchasecity = SUBSTRING(@body,@purchasecitystart,@purchasecityend-@purchasecitystart)
--Below is collecting Date Purchased information
SET @datepurchasedstart = (CHARINDEX('Date Purchased:',@body) + 15)
SET @datepurchasedend = (CHARINDEX('Date Opened',@body) -1)
SET @datepurchased = SUBSTRING(@body,@datepurchasedstart,@datepurchasedend-@datepurchasedstart)
--Below is collecting Date Opened information
SET @dateopenedstart = (CHARINDEX('Date Opened:',@body) + 12)
SET @dateopenedend = (CHARINDEX('E-mail Subject:',@body) -1)
SET @dateopened = SUBSTRING(@body,@dateopenedstart,@dateopenedend-@dateopenedstart)
--Below is collecting Email Subject information
SET @subjectstart = (CHARINDEX('E-mail Subject:',@body) + 15)
SET @subjectend = (CHARINDEX('Comments:',@body) -1)
SET @subject = SUBSTRING(@body,@subjectstart,@subjectend-@subjectstart)
--Below is collecting message information
SET @commentsstart = (CHARINDEX('Comments:',@body) + 10)
SET @commentsend = len(@body)
SET @comments = SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)
--below is the part that actually writes the data out to the Output table
INSERT INTO OutputEmails
(FirstName, LastName, Address1, Address2, City, State, Zip, Country, eMail, Phone, Phone2, ProductName, UPCCode, DateCode, PurchaseAt, PurchaseCity, DatePurchased, DateOpened, Subject, Comments, OrigID)
SELECT
ltrim(SUBSTRING(@body,@firstnamestart,@firstnameend-@firstnamestart)) as FirstName,
ltrim(SUBSTRING(@body,@lastnamestart,@lastnameend-@lastnamestart)) as LastName,
ltrim(SUBSTRING(@body,@address1start,@address1end-@address1start)) as Address1,
ltrim(SUBSTRING(@body,@address2start,@address2end-@address2start)) as Address2,
ltrim(SUBSTRING(@body,@citystart,@cityend-@citystart)) as City,
ltrim(SUBSTRING(@body,@statestart,@stateend-@statestart)) as State,
ltrim(SUBSTRING(@body,@zipstart,@zipend-@zipstart)) as Zip,
ltrim(SUBSTRING(@body,@countrystart,@countryend-@countrystart)) as Country,
ltrim(SUBSTRING(@body,@emailstart,@emailend-@emailstart)) as eMail,
ltrim(SUBSTRING(@body,@phonestart,@phoneend-@phonestart)) as Phone,
ltrim(SUBSTRING(@body,@phone2start,@phone2end-@phone2start)) as Phone2,
ltrim(SUBSTRING(@body,@productnamestart,@productnameend-@productnamestart)) as ProductName,
ltrim(SUBSTRING(@body,@upccodestart,@upccodeend-@upccodestart)) as UPCCode,
ltrim(SUBSTRING(@body,@datecodestart,@datecodeend-@datecodestart)) as DateCode,
ltrim(SUBSTRING(@body,@purchaseatstart,@purchaseatend-@purchaseatstart)) as PurchaseAt,
ltrim(SUBSTRING(@body,@purchasecitystart,@purchasecityend-@purchasecitystart)) as PurchaseCity,
ltrim(SUBSTRING(@body,@datepurchasedstart,@datepurchasedend-@datepurchasedstart)) as DatePurchased,
ltrim(SUBSTRING(@body,@dateopenedstart,@dateopenedend-@dateopenedstart)) as DateOpened,
ltrim(SUBSTRING(@body,@subjectstart,@subjectend-@subjectstart)) as Subject,
ltrim(SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)) as Comments,
@_id as OrigID
FROM dbo.message
WHERE (mailId = @_id)
END
ELSE BEGIN
--below prints the whole value in the debugger (SQL Query Analyzer)
--print @body
--below prints the length of the whole value
--print len(@body)
--below prints the location of 'Callers Name:'
--Print CHARINDEX('Name: ',@body)
--Below is collecting the Name information
--The 6 in the start is compensating for the 6 Characters of "Name: "
SET @namestart = (CHARINDEX('Name:',@body) + 5)
SET @nameend = (CHARINDEX('Email:',@body) - 1)
SET @name = SUBSTRING(@body,@namestart,@nameend-@namestart)
--Below is collecting email information
SET @emailstart = (CHARINDEX('Email:',@body) + 6)
SET @emailend = (CHARINDEX('Title:',@body) -1)
SET @email = SUBSTRING(@body,@emailstart,@emailend-@emailstart)
--Below is collecting Company information
SET @companystart = (CHARINDEX('Company:',@body) + 8)
SET @companyend = (CHARINDEX('Phone Number:',@body) -1)
SET @company = SUBSTRING(@body,@companystart,@companyend-@companystart)
--Below is collecting phone information
SET @phonestart = (CHARINDEX('Phone Number:',@body) + 13)
SET @phoneend = (CHARINDEX('Comments:',@body) -1)
SET @phone = SUBSTRING(@body,@phonestart,@phoneend-@phonestart)
--Below is collecting message information
SET @commentsstart = (CHARINDEX('Comments:',@body) + 9)
SET @commentsend = len(@body)
SET @comments = SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)
--below is the part that actually writes the data out to the Output table
INSERT INTO OutputEmails
(Name, eMail, Company, Phone, Comments, OrigID)
SELECT
ltrim(SUBSTRING(@body,@namestart,@nameend-@namestart)) as Name,
ltrim(SUBSTRING(@body,@emailstart,@emailend-@emailstart)) as eMail,
ltrim(SUBSTRING(@body,@companystart,@companyend-@companystart)) as Company,
ltrim(SUBSTRING(@body,@phonestart,@phoneend-@phonestart)) as Phone,
ltrim(SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)) as Comments,
@_id as OrigID
FROM dbo.message
WHERE (mailId = @_id)
END
--At the very end when you're satisfied that the data has been processed properly, delete the appropriate message record from the message table
DELETE FROM MESSAGE Where message.mailID = @_ID
GO
Sample Data that has problems
Fromubject:contact info sent from samplesite.comBody:First name: Sample
Last name: Name
Address 1: 123 Testing Road
Address 2: Don't filled
City: Park Forest
State/Province: FL
Zip/Postal Code: 12345-1234
Country: USA
E-mail address: validemail@email.com
Daytime Phone: 123-123-1234
Evening Phone: Don't filled
Product Name: Sample Product with Cheese
UPC Code: 12345-89521
Date Code: 1251237 D PST . 5290
Purchased At (Store Name): StoreName
Purchase City: Store City
Date Purchased: 12/8/2007
Date Opened: 12/14/2007
E-mail Subject: nail in product
Comments: when I purchased your product, there was something in it. Obviously I am not happy about this. Please contact me. Thank you John Q Public
Hi
I am new to SQL server and I have been trying hard to make a client computer to remote connect to a SQL express database on host computer
I have a VB6 application that can connect to SQL server database LOCALLY without problem:
Connection String is:
my_connection.ConnectionString = "Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=MyMushroom;Data Source=LAPTOPSQLEXPRESS"
I have followed instruction on enabling remote connection function from this blog:
http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
I then try to run the same app from the client computer, it gives me:
Login failed for user 'LAPTOPGuest'.
After looking up the web for solution, I found that I can test the connection from the HOST computer in this way:
C:Documents and Settingskit>sqlcmd -E -S laptopsqlexpress
1>
2>
The test is successful
Now I run the same command on the CLIENT computer
C:Documents and SettingsKit>sqlcmd -E -S laptopsqlexpress
Msg 18456, Level 14, State 1, Server LAPTOPSQLEXPRESS, Line 1
Login failed for user 'LAPTOPGuest'.
Now I can sure that from the client computer it cannot make a connection to it, then I look at the errorLog from my host computer
2006-08-13 21:41:00.34 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:41:00.34 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
2006-08-13 21:45:10.64 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:45:10.64 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
2006-08-13 21:48:41.80 Logon Error: 18456, Severity: 14, State: 11.
2006-08-13 21:48:41.80 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
Now I know it is actually Error: 18456, Severity: 14, State: 11.
From this site : http://blogs.msdn.com/sql_protocols/archive/2006/02/21/536201.aspx
11 and 12
Valid login but server access failure
It tells the connection string and SQL Express seem to be set up properly but the server access failed the remote connection
I have previously had SQL Server 2000 installed. I uninstalled SQL 2000 before I install SQL express but somehow the SQL Server Service Manager is still running at startup, and C:Program FilesMicrosoft SQL Server80 and its files are still exist after uninstallation..... Could this be a problem?
The Knowledge base suggestion on "enabling remote connection" is very simple and I do not understand why it is so difficult to me just to make a remote connection test work..... please, I need your help.
Recently, one of my clients began receiving this error. My team gave them sysadmin permissions, but this is terrible practice. I have read into disablying simple file sharing, but I don't even think I have the option to do it. I look in mycomputer > tools > view and don't see any option for this. Besides, the problem just started occuring recently, within the last week. The server is a cluster with veritas clustering and the edition is sql server 2000. Has anybody ever had a problem like this and have a good fix?
Thanks for any help in advance...
-Kyle
Hi,
I wanted to check the asymmetric key option in sql 2005. I copied the books online code for creating a asymmetric key and then used this key for creating a login. Now when I try to login without entering any password I am receiving 18456 error. I would like to know what I am missing here. If I use CREATE LOGIN from asymmetric key or certificate how do I login and with what credentials. Do I need to provide any password.CREATE ASYMMETRIC KEY PacificSales09
WITH ALGORITHM = RSA_2048
ENCRYPTION BY PASSWORD = 'bmsA$dk7i82bv55foajsd9764';
GO
CREATE LOGIN asm FROM ASYMMETRIC KEY PacificSales09;
Regards,
Ravi
I'm getting a specific error when i try to run a .sql script for a Custom TableProfileProvider ,when i Parse the .sql file Commands execute perfectly. But when i actually "Execute" the .sql script i get the following error. It will produce the table but with "Errors" which dosn't do anyone any good to have errors in the table. I even used the Sql Server Surface Area Configuration to add a new Administrator with the name listed below (WYATT-PCWyatt), that didnt help either..Here is part of the Sample Scheme the problem lies in the [YOURMACHINENAMEASPNET]
Server = WYATT-PCSQLEXPRESS
Computer Name = Wyatt-PC
OS: Windows Vista Home Premium
===========================================================
use TableProfileProviders
go
--
--grants on ASP.NET stored procedures and tables used by the custom providers
--
grant EXECUTE on dbo.aspnet_Applications_CreateApplication to [YOURMACHINENAMEASPNET]
grant EXECUTE on dbo.aspnet_Users_CreateUser to [YOURMACHINENAMEASPNET]
grant SELECT on dbo.aspnet_Users to [YOURMACHINENAMEASPNET]
grant UPDATE on dbo.aspnet_Users(LastActivityDate) to [YOURMACHINENAMEASPNET]
go
--drop table dbo.ProfileTable_1
--go
create table dbo.ProfileTable_1 (
UserId uniqueidentifier not null Primary Key,
FirstName nvarchar(50) null,
LastName nvarchar(50) null,
Age int null,
LastUpdatedDate datetime not null)
go
grant SELECT,INSERT,UPDATE,DELETE on dbo.ProfileTable_1 to [YOURMACHINENAMEASPNET]
go
================================================================================
Msg 15151, Level 16, State 1, Line 5
Cannot find the user 'WYATT-PCWyattASPNET', because it does not exist or you do not have permission.
How can i fix this??
I get this error when trying to connect. I'm using the sa id and password for all of my odbc connections. It fails when trying to connect to this one but it's ok on a couple of others I've set up with the same id etc.
Where is this "" coming from and how to avoid it in the future?
I've removed and recreated the connection to be sure that I didn't actually type that in as the id....hey it's monday...it could happen.
I am running several instances of SQL Server 2005 sp2 on a W2k3 sp2 box (member server).
This morning, I installed reporting services to one of my instances and shortly after noticed I was getting the following two messages in my SQL Server log file:-
08/08/2007 11:05:03,Logon,Unknown,Login failed for user 'DOMAINDOMCONTROLLER$'. [CLIENT: xxx.xxx.xxx.xxx]
08/08/2007 11:05:03,Logon,Unknown,Error: 18456, Severity: 14, State: 16.
The above entries were each repeated 6 times every 15 minutes but with State 11. I created a logon for the above, and now get the above messages (state 16) repeated 3 times every 15 minutes!
Any ideas why?
Regards
Ian
SQL2000 SP4 (SQL and Windows authentication) on Win2000SP4. Event ID 17055 (18456: Login failed for user 'sa'.) is being logged at an average of 20 times an hour. Tried to run SQL Profiler but it no trace information on the source (host, ip or application) of the failed login. Some forums suggest to unplug the server from network to know if its a local or networked issue but this is not possible in my case. Acquiring firewall/router logs from Network team is a headache. Any help on pinpointing what/where is this failed login coming from is very much appreciated.
View 1 Replies View Related
i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.
why ?
G'day everyoneThat's a space between the ticks.It's all part of a longer script but seeing as the failure occurs online 1if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[config]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[config]GOThat's three lines only. Does it matter that they're in Unicode?Any ideas?Kind regards,Bruce M. AxtensSoftware EngineerStrapper Technologies
View 3 Replies View RelatedLogin Failed for user , the user is not associated with a trusted sql server connection. (microsoft SQL Server,Error:18452)
hi ,
i am getting the above error message once in a while maybe two or 3 times a week , and then it goes away in 10 to 15 minutes or 5 minutes ,
our mode is set to mixed and we are able to connect and use both sql and windows , but once in a while , it will give us the above message when we try connecting throught sql server management studio client (using sql 05) using windows login , although it lets us connect using sql login while the windows login is denied, and after a while it lets us connect with both.
occurs randomly on some days , we run our servers on VM ware virtual machines using windows 2003 r2 enterprise 64 bit with sp2 with esx 301 virtual machine.
would appericate any feedback on this thanks