SQL Server 2000 Service Not Running In Local Machine
Jul 23, 2005
Hi all,
After merged two partitions into one (C: and D: into one C:) by
using Partition Magic, I can't start SQL Server 2000 which was
previously installed in both C:Program FilesMicrosoft SQL Server80
and D:Program FilesMicrosoft SQL ServerMSSQL
The original files in D: (every thing in D: actually) are now copyed
in C:Data folder.
Other than re-install SQL Server in C:, is it possible to restore
data(files) from D:Data ?
Mank thanks to any suggestions/hints.
Kind Regards,
Bob
View 3 Replies
ADVERTISEMENT
Jul 23, 2005
I am in a situation where I need to get a copy of test database that ison production server running MSSQL 2000 Standard to my local machinerunning MSSQL 2000 personel. I tried to use the copy wizard where itappears I get connected to the source server OK but when I try toindicate the destination server which is my local machine I get errorspoping up about cannot connect to (local) etc.I am NOT a DBA just a programmer trying to get a local test environmentup to be more productive.Lsumnler
View 2 Replies
View Related
Jul 23, 2005
Hello there,This is a bit of strange one.My local version of SQL Server fails to start when I boot yet if Istart Enterprise Manager its started and working fine. ISQL or QueryAnalyzer is also not working.If I try and register the server by another SQL Server is not there. Methinks that the named pipes might be a bit broken but would appreciateany advise from people.ThanksGinters
View 2 Replies
View Related
Dec 19, 2006
Hi,
I want to know whether the MSDE is already installed or not on my system using a C# program. For this I have a method which will take the service name as argument and returns whether that servce is found or not. Now I want to know which windows service (service name) will be running on my machine if the MSDE is already installed. Please help me out.
View 1 Replies
View Related
Jun 15, 2007
I have had a new PC and have installed SQL Server. However, I do not seem to have anywhere to create databases on my PC. I did on my old one. How can i do this ?
View 2 Replies
View Related
Feb 7, 2007
Hi all,
Apologies if this is a dumb question, but I'm tearing my hair out over the basics when I should be spending time learning ASP.NET 2.0 and C#. I've searched the archives and a lot of people seem to be getting the same error as me, but when trying to connect from remote machines.
I'm getting what seems to be a standard message ...
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I'm not trying to connect remotely, I'm on my developer machine. The error comes up when trying to connect from within VS2005 (Tools, Connect to Database). It also comes up if I create a new web-site and go to the ASP.NET configuration tool (this is, I guess, trying to create the necessary database behind the scenes but is unable to connect to the database).
I suspect the error might be related to one or more of the following ...
September last year I installed VS2005 Express and SQL*SERVER Express. Both were fully un-installed when I bought VS2005 Professional before installing the new product.
When I set up SQL*SERVER 2005 Developer I remember choosing an option to have a separate user on my PC with administrative rights. Actually I don't recall much about what I chose but I can't find out where those permissions are managed from.
I've followed various instructions to check that remote access is enabled (despite the fact that I'm local, not remote). TCP and Named Pipes are both enabled (and I stopped then restarted SQL Server). I've checked that the service is started.
The odd thing is that I have had an application connect with the following string ...
SSLCon = new SqlConnection(@"Server=(local)SSLMJ;Integrated Security = True;" + "Database=SSLTESTRESULTS");
Though the application connection seems to work ok, I think I'm missing out lots of developer functionality because I can't get VS2005 to see the database or server.
Help ?
View 7 Replies
View Related
Feb 27, 2006
First of all let me explain that I am a complete newbie to this SQL stuff. I am in the process of reading a book, and followed the books suggestions for what I want to do, but it doesn't work. I know this has been covered several times in this forum, but no one post in particular covered exactly what I want to do.
I want to copy the database from the server to my local machine.
First, do I need to have SQL running on my machine in order to copy the database? I do have Enterprise Manager running, does that mean SQL Server is running locally?
Secoond, I tried using the Copy Wizard, but when I get to the target list, my local machine is not listed. How do I get it listed so I can copy the database?
I hope my questions are not too stupid... but then I'd be stupid if I didn't ask questions.
Thanks in advance for your help...
David
View 2 Replies
View Related
Jun 14, 2006
This is what I sometimes want:
I have installed on a localmachine sqlexpress. Also my application is installed on the local machine.
But for the night-backup of the database I want to put the database on the company server.
Let's say the database is on: X:datamydatabase.mdf
Why cant't I attach this database with the manager of sqlexpress
Second:
I have installed on local machine sqlexpress AND also the database
Why can't I backup the file to the server like:
BACKUP DATABASE [mydatabase] to DISK=x:datamydatabase.bak WITH FORMAT
It looks I can only backup to the localmachine.
thanks a lot
Klaas
View 5 Replies
View Related
May 4, 2007
Help!
I am using Script Transformation to output a new column as image[DT_IMAGE]
field to store serialized object. In the VB script, the sample code as
Row.serializedobject.AddBlobData ( binaryArrayReturnedFromC#dll )
The package always runs fine on my developing machine and will halt on other
machine at AddBlobData after certain number row records were processed. I am
stuck here. Anyone has any suggestion?
What I need is reading data from mutiple tables in one database and writing
into a single table in another datable. In order preserve all the columns
data, I use input column fields to construct a new object and then serialize
it, and store the serialize data into detination db table. (The object and
serialization function is coming from c# dll.)
Dim b As BusinessLicense = New BusinessLicense()
b.ApprovalDate = Row.approvaldate
b.BusinessId = Row.busid
b.BusinessName = Row.busname
b.NaicsCode = Row.naicscode
b.NaicsDescription = Row.naicsdescr
b.OwnerName = Row.ownername
b.Phone = Row.phone
b.Pkey = Row.pkey
b.RenewalDate = Row.renewaldate
b.StartDate = Row.startdate
b.Suite = Row.suite
Row.serializedobject.AddBlobData(Serializer.Serialize(b)) '''----This is blocking line
Row.infoType = BusinessLicense.TYPE
Both machine is xp with sp2. and standard SQL Server 2005 - 9.00.1399.06
Thanks!
View 4 Replies
View Related
Oct 2, 2000
Hullo all
I have two machines,
One is a standalone machine and the other is on a domain network. How can I run a stored procedure/job on the standalone machine from the domain machine ?
running the procedure as a Domain user results in a failed job/stored proc.
also creating an sql login and attempting to run it as that user also fails. How can I solve this problem ?
please e-mail me at wayde@sunnygrp.com if you have any thoughts...
View 1 Replies
View Related
Sep 14, 2007
Hi and thanks in advance for your help.
I have a dilemma and I need some expert help with this. I am trying to make a copy of a remote Database and then replicated the DB and it's contents on my local machine so I can build a test site to run data with. I tried to remot into the server machine but I guess that feature is not allowed by the honest of the remote machine. Since I build on my local machine and would like to be able to test data on my local machine.... I would like to copy the remote DB to my local computer and then I can run my test app on my local server. The version of SQL on the remote machine is SQL Express 2005 and I have SQL 2005 on my machine. Please give me how to accomplish this please.
Dollarjunkie
View 1 Replies
View Related
Sep 17, 2015
I have a SQL Server 2014 installation on a server (CHRIS-PCCHRISSQL).I have SQL Server 2014 management studio installed on local server called Pootle.I have gone through the configuration on server (CHRIS-PCCHRISSQL) inc the following:
(1) I have set up a user on CHRIS-PCCHRISSQL called sqladminuser at server level with the Server Roles of 'Public' and 'SysAdmin'
(2) The computers are both on the same homegroup.
(3) On Chris-PC , I have opened up the firewall port 1433 as Inbound Rule
(4) On Chris-PC, Within SQL Server Configuration Manager,the 'SQL Server Network Configuration for Protocols for CHRISSQL' have been set up as follows:
- The TCP protocol is enabled
- I have set up IP2
as follows:
Active: Yes
Enabled: No
IP Addres: 192.168.0.3
However when I try to connect from SQL Server Management Studio 2014 on my local machine Pootle to Chris-PCCHRISSQL using SQL Server Authentication with the user sqladminuser
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)how to set up a remote connection from SQL Server Management Studio
on my local machine Pootle to CHRIS-PCCHRISSQL
View 6 Replies
View Related
Jul 23, 2005
We currently have a PPTP connection set up for our developers toaccess our development SQL server through a VPN tunnel. When theyneed to copy tables up to the dev SQL from their local machine theysimply do a DTS copy.However, we are now moving to a thin client solution where they willbe working on a terminal server. They will have access to thedevelopment SQL servers and SQL tools such as EM and QA. However,they will not have access to their local SQL server and, therefore,will not be able to directly perform DTS copies. We have exploredseveral possibilities such as exporting tables to a .csv or .mdb fileand then importing them on the development SQL server but this is notideal because things are lost in that process (e.g. primary keys,field names, data types, etc.)My question is this: Is there a way to export and then import SQLtables without losing dependent objects such as primary keys and datatypes in the process? If any of you are working with a similarsituation I would really like to hear how your remote users copyobjects from their remote location to your SQL servers. Thanks!Ryan--Posted using the http://www.dbforumz.com interface, at author's requestArticles individually checked for conformance to usenet standardsTopic URL: http://www.dbforumz.com/General-Dis...pict211310.htmlVisit Topic URL to contact author (reg. req'd). Report abuse: http://www.dbforumz.com/eform.php?p=722630
View 4 Replies
View Related
May 16, 2007
Hello Reporting Services 2005 users or Reporting Services Team,
I have done everything to get pass this error but no luck.
My setup is :- WIndows 2003 Standared Edition SP1
Sql Server :-
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Reporting Services starting SKU: Standard.
From the Reporting Services Configuration Manager:
I can see all other things configured except Encryption Keys(blue sign)
Initialization(Grey sign) and Execution Acct(Yellow sign)
My windows Service Identity is using :
NT AuthorityNetworkService
Builtin Acct :NetworkService
Web Service Identity :-
ASP.NET Service Acct :- NT AuthorityNetworkService
DataBase Setup :- Credentials Type :- Service Credentials
I have also done everything from here thanks to Göran
http://stevenharman.net/blog/archive/2007/03/21/Avoiding-the-401-Unauthorized-Error-when-Using-the-ReportViewer-in.aspx
and
http://support.microsoft.com/default.aspx?scid=kb;en-us;896861
and
http://forum.k2workflow.com/viewtopic.php?t=619&
If you guys any solution for this please let me know.
I was wondering could this be a scale-out deployment issue ?
I also get the error when setting up the DataBase Setup :
Although saving the database connection info succeeded the The report server cannot access internal info about this deployment to determine whetherthe current con fig is valid for this editionThis could be a scale-out deployment and that the feature is not supported by this editionTo continue use a diff report server database or remove the encription keys
My Error log file is below:-
w3wp!webserver!5!16/05/2007-14:52:46:: i INFO: Reporting Web Server started
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Reporting Services starting SKU: Standard
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Evaluation copy: 0 days left
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Running on 1 physical processors, 2 logical processors
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!library!5!05/16/2007-14:52:48:: i INFO: Call to GetPermissions:/
w3wp!library!5!05/16/2007-14:52:48:: i INFO: Catalog SQL Server Edition = Standard
w3wp!library!5!05/16/2007-14:52:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
View 8 Replies
View Related
Mar 18, 2008
Hi,
I using SQL 2005 on Vista machine.
After disconnected from VPN (Cisco) , I am not able to connect to my SQL. Getting the error Microsoft OLE DB Provider for SQL Server error '80004005' Timed Out.
Restarting the SQL Server or Reset IIS, nothing works.
If I restart the machine, it works fine again.
If I don't connect to VPN, I have no problem.
I am wondering that might be the problem. I enabled all the protocols.
Thanks
Venkat
View 4 Replies
View Related
Mar 1, 2008
I am trying to use a new Excel microsoft add-in using SQL server 2005. I installed the 180 day trial version of SQL Server 2005 on my local machine and according to the instructions it was suppose to be very easy to connect the excel add in to SQL. I am receiving an error message which I cannot find a resolution to using the readme file and wonder if you can help.
ERROR MESSAGE
Unable to connect to server 'localhost'. Please make sure user 'ARTIMUS' has at least read permission to some database on the server.
THanks for your help!
Art
View 6 Replies
View Related
Jun 29, 2015
I've a SQL server 2014 running on one of our server. We're in the process of implementing security steps for our databases. I've encrypted a column in one of the table in the database on the server. The issue is when I restore the backup on my local SQL server and run a query to decrypt the column data it gives me null values. On the other end when I decrypt the column data on the main server it works fine. I found a thread on this forum which states to do the following when restoring the encrypted database on different server.
USE [master];
GO
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'StrongPassword';
ALTER MASTER KEY ADD ENCRYPTION BY SERVICE MASTER KEY;
GO
select File_Name
, CONVERT(nvarchar,DECRYPTBYKEY(File_Name))
from [test].[dbo].[Orders_Customer]
I tried doing above still no luck.
View 3 Replies
View Related
Oct 9, 2006
I am developing an ETL system on a 32-bit machine let's say, called 'dwdev'. The application connects to a Sybase database as a source system using ODBC connection. I am able to run this application directly from Visual studio 2005 and i am able to deploy it into SQL Server 2005 and run it from Server as a job. Both work. At this server i am connecting to a SQL Server instance called 'dwdev'.
When i transfer my application onto a 64-bit machine, let's say called 'dwtest', i am able to run my application from Visual Studio 2005 properly and it works, but when i deploy it into SQL Server (instance is called 'dwtest') and try to run it as a job just like the development machine, it gives an error and stops executing.
I was facing 'data source' type of error when i was first trying it from Visual Studio, but i solved this problem by setting Run64bitRunTime settings to FALSE on the Project's properties Debugging Page, at 64-bit machine. now it uses 32-bit runtime then 32-bit Sybase ODBC driver. But i cannot force the application to use 32 bit runtime when i am executing it from SQL Server as a job.
How can i do that? is there an alternative method?
Thanks for your help...
View 1 Replies
View Related
Jun 14, 2007
I have SQL Server 2005 express installed on my machine, and I was wondering if there is any way to have an asp.net 2.0 web service hosted by a different company be able to send sql commands to the sql server on my machine.
View 3 Replies
View Related
May 30, 2006
When doing the service pack 1 install on a client side the machine is locking up on a specific file. The tech who tried it out doesn't remember the exact file name but he thinks it ended with an .msb or .msp
I checked in the C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFiles directory and none of the files have been updated.
Thoughts?
Shane
View 1 Replies
View Related
Apr 18, 2008
Hi folks!!
I am new to installation of SQL Server 2005..I wanted to know while selecting Service Account Screen why Avoid running SQL Server Agent as the Local System account.????
T.I.A
View 2 Replies
View Related
Oct 31, 2006
Hi:
A very stupid question but want to see if i have an answer.
Is it possible to run SQL Server Service and SQL Server Agent Service under local system(not Domain account) without granting SA Permissions on the server. is it ever possible to run by just granting some registry permissions and not making BUILTINAdministrators a SA on the server.
Thx
AK
View 4 Replies
View Related
Aug 5, 2006
I have done a full Sql Server install on a server and the SSIS service is not available. Normally when I load Sql Server I get €œSQL Server Integration Services" as a service that I can start. On this machine it is not listed after the install. I don't get any errors through out the install.
Please Help!
Steve
View 1 Replies
View Related
Jan 31, 2008
Being a very novice SQL Server administrator, I need to ask the experts a question.
How do I go about moving a database from 1 drive to another? The source drive (C is local to the server, but the target drive (E is on a Storage Area Network (SAN), although it is still a local drive for the server. I want to move the database from C: to E:. Can someone provide me with instructions?
Thanks,
Rick
View 4 Replies
View Related
Jan 17, 2008
Hi,
here goes the question:
i have 1 sqlserver 2k5 machine (machine A) and sqlserver 2k (machine b)
how do i build a query to select data from 2k machine in a query of 2k5?
i mean something like
select *
from login:passw@machineb.dabatase.dbo.customers
thanks!
View 2 Replies
View Related
Jan 17, 2008
Hi,
here goes the question:
i have 1 sqlserver 2k5 machine (machine A) and sqlserver 2k (machine b)
how do i build a query to select data from 2k machine in a query of 2k5?
i mean something like
select *
from loginassw@machineb.dabatase.dbo.customers
thanks!
View 6 Replies
View Related
Mar 31, 2006
My SQL Server 2005 runs on a local account. Is it neccesary to assign this login in SQL to a System Administrator role?
And is there any difference in SQL Server 2000?
thanks
Przemo
View 1 Replies
View Related
Mar 23, 2007
Hi, I'm developing a website using VWD 2005 Express, which needs a Membership system and a products database. Using the VWD inherent Web Site Administration tool makes the membership set up easy but by default it creates a 'Local' SQL database in a folder named 'Apps_Data' in the VWD project. My question is: considering I will need to upload my web site to a Hosting Service, would it be better to change the default so that the membership systems, and the product database I need, are created in an SQL 'Server' database instead of a 'Local' database?
The hosting service I am considering using is having a bit of a problem understanding this question, I hope it makes sense to someone or am I asking a stupid question?
Regards
Sean.
View 2 Replies
View Related
Feb 5, 2007
The current way I have my asp.net 2.0 web app running reports is, based on an
interface the user selects the criteria for a report. The .RDL file is created
dynamically based on the user's selections.
I then need to SOAP the dynamically created report to the report server and
then the report runs fine.
BUT it requires Adminstrative rights to do this. Can this be accomplished
without giving the local machine admin rights. I am sorry if this question
has been answered before but i have not been up here in a while.
View 1 Replies
View Related
Oct 29, 2007
See above. At first I thought it was a problem with SQL server, since I have just installed a new certificate. Now I am not so sure. Any suggestions???? Thanks, kreid
View 3 Replies
View Related
Jan 29, 2008
What is the fastest way to get a copy of a SQL server database on a server to my local Windows XP Professional system?
View 4 Replies
View Related
Aug 28, 2000
Hi
I need to change the Local Machine Name. But if I do that, my SQL server will stop working. Is there any way to fix the SQL Server?
Thanks in advance
Manish
View 2 Replies
View Related
May 13, 2007
I have SQL Server Express 2005. I have it configured for remote connections, but I cannot even see my local dbase. I have the server setup for windows authentication. In VB 2005 database connection wizard I see the db server but on the database itself.
When I click test connection....without a dbase choosen it says ( i don't have any to choose from).
"An error has occured while establishing a connection to the server. When connection to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server"
This doesn't make sense because i have changed the the surface area configuration to allow remote connections on both TCP/IP and Named pipes. It shouldn't matter though because this is a local database.
Thanks
Kramer
View 4 Replies
View Related
