SQL Server 2000 To SQL Server 2005 - Any Changes Required To Existing Code, System.Data.SqlClient.SqlConnection?
Dec 13, 2007
My web project (ASP.NET 2.0 / C#) runs against sql server 2000 and uses the System.Data.SqlClient.using System.Data.SqlClient;
I use System.Data.SqlClient.SqlConnection and System.Data.SqlClient.SqlCommand to make the connections to the database and do selects and updates. Is it correct to continue to use these against SQL Server 2005? I ask because I made a connection string (outside of .Net) for SqlServer 2005 using the SQL native provider and it had the following - Provider=SQLNCLI.1 and any connection strings I had made (also outside of ASP.NET) fro SQL Server all used Provider=SQLOLEDB.1. This is why I wondered if there is a different SqlClient in .Net 2.0 for SQL Server 2005?
Cheers
Al
View 1 Replies
ADVERTISEMENT
Apr 23, 2007
I have lots of problems with the connection. I've connected many dropdownlists to the database and i didn't have problems at all. I also try an example of an ASP.NET book:
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString= "<%$ ConnectionStrings:CIPPEC%>"
InsertCommand=
"INSERT INTO
[member] ([first_name], [last_name], [malefemale], [yearborn])
VALUES
(@first_name, @last_name, @malefemale, @yearborn)">
<InsertParameters>
<asp:FormParameter Name="first_name" Type="String"
FormField="FirstTextBox" />
<asp:FormParameter Name="last_name" Type="String"
FormField="LastTextbox"/>
<asp:FormParameter Name="malefemale" Type="Int32"
FormField="MFRadioButton" />
<asp:FormParameter Name="yearborn" Type="Int32"
FormField="YearDropDown" />
</InsertParameters>
</asp:SqlDataSource>
And it worked well. But when i try to connect my page with:
Dim connect As New Data.SqlClient.SqlConnection( _
"Server=glgrand-arSQLEXPRESS;UID="WindowsStartupUser";password="WindowsStartupPass"; database=CIPPEC")
connect.Open()
Dim cmd As New Data.SqlClient.SqlCommand( _
"INSERT PRUEBA (PersonaJuridica, NombreRazonSocial, Nombre, Segundo_nombre, Apellido) " & _
"VALUES (txtPerJur, txtRazSoc, txtName, txtSecondName, txtApellido)", _
connect)
cmd.ExecuteNonQuery()
connect.Close()
The error message says: Login failed for user 'username'.
I tried lots of things but it didn't work:
In SQL Configuration Manager:
Client Protocols: TCP/IP and Named Pipes are enabled.
In SQL 2005 Services: Server Properties: Built-in Account: Local System
SQL Server Surface Area Configuration: Remote connections: Using both TCP/IP and Name Pipes connection is selected.
In SQL Management Studio i created a new login glgrand-ar/UserStartupName , with sysadmin server role and user mapping my CIPPEC database.
I don't know what else i could try, i tried it at home and at work and i couldn't connect to my database and make an INSERT. It stops at Connect.Open() with the error that i wrote in this subject message.
It's evident that i'm doing something wrong (because i'm new): Could you please help me with a solution and explain me what are the data that i have to put on the Data.SqlClient.SqlConnection ?? I'm using the Windows authentication: i'm putting my username and password and it doesn't worked.
Thank you!!
View 1 Replies
View Related
May 3, 2008
<code>
public static DataTable GetCountries() { SqlConnection myConnection = new SqlConnection(ConfigurationManager.AppSettings["omegaloveConnectionString"]);
if (myConnection.Connect()) .............. problem
{ SqlCommand cmd = new SqlCommand("prcGetCountries", myConnection); cmd.CommandType = CommandType.StoredProcedure; DataTable countries = new DataTable(); countries.Columns.Add("CountryId", typeof(string)); countries.Columns.Add("Country", typeof(string)); SqlDataReader reader = cmd.ExecuteReader(); while (reader.Read()) { DataRow dr = countries.NewRow(); dr[0] = reader["CountryId"].ToString(); dr[1] = reader["Country"].ToString(); countries.Rows.Add(dr); } reader.Close(); return countries; } else return null; } }
</code>
View 1 Replies
View Related
May 31, 2008
Yesterday, in response to an error msg (something like Login failed for user ''), I deleted the 'providerName=System.Data.SqlClient'in my connectionStrings from Web.config. Then the aspx website worked.I understand that the value "System.Data.SqlClient" specifies that ASP.NET should
use the ADO.NET provider System.Data.SqlClient
when making a connection. Why deleting providerName solved the error? Jeffrey
View 2 Replies
View Related
Mar 9, 2004
Hi everybody,
We are developing Asp.Net Application in following environment.
Windows 2003
Dot Net 2003
SQL Server 2000
Problem :
We have team of four people. We made one machine as database server and rest of the people trying to connect to that database server. we are getting error "SQL server not found.".
We are using following string as a connection string.
"DATA SOURCE=192.292.7.105;DATABASE=xxx;User ID=xxx;password=xxxx"
We have tried same connection string with the VB.Net program. It is working fine.
But when we are trying same string in the web application. It is giving me the above mentioned error.
Can any one help me ?
Thanks is advance.
From
Jigar Shah
View 4 Replies
View Related
Jan 8, 2007
Hi all
Please help me.
I have an asp.net 1.1 (vb.net) application which accesses data from a sql server 2000. I published this application on http://test.autenmas.co.za and the database I access is on 196.23.156.196. I am getting this error message when I run the application from this site:
System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.
But it's working fine on my local, development machine. I am using the following connection string in my connections:
"Data source=196.23.56.193; Initial Catalog=Autenmas; User Id=xxxx; password=yyyy"
Is there anything wrong with my code, is there anything that must be done on the web/database server or any other configurations for that matter, what really is the problem??????
Thanks in advance.
View 1 Replies
View Related
Aug 21, 2006
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
View 28 Replies
View Related
Mar 27, 2008
Is it possible to connect to an Access database on my local drive, or does it have to an SQL database? Here is the error I am getting:
Server Error in ' 'Application.
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified) Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: An error has occurred while establishing
a connection to the server. When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)Source Error:
Line 19: Dim ConString As String = ("Data Source=C:Inetpubwwwrootmessage.mdb")Line 20: Dim myDataAdapter As New SqlDataAdapter(SQLStatement.Text, ConString)Line 21: myDataAdapter.Fill(myDataSet, "tblMessage")Line 22: myDataGrid.DataSource = myDataSet.Tables("tblMessage")Line 23: myDataGrid.DataBind()
View 2 Replies
View Related
Aug 18, 2007
I have SQL Server 2005 Developer Edition. And my operating system is Windows Vista.
I have written a procedure in C# and deployed it on SQL Server. However when i try to run it i get the following error.
System.Data.SqlClient.SqlException: The locale identifier (LCID) 16393 is not supported by SQL Server
Also I tried using same procedure in Windows XP machine and it workd fine. Can anyone help me what could be the problem?
View 12 Replies
View Related
Sep 30, 2004
While making a connection to a SQL server Enterprise Database using ASP.Net(C#), during execution of .aspx file i got the following error :-
Kindly help me if anybody knows the solution .
Thanks in advance
Login failed for user 'IT-CELLIWAM_IT-SERVER'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'IT-CELLIWAM_IT-SERVER'.
Source Error:
Line 52: //mycommand.SelectCommand.CommandType=CommandType.StoredProcedure;
Line 53: DataSet ds=new DataSet();
Line 54: mycommand.Fill(ds);
Line 55: DataTable dt;
Line 56: dt=new DataTable();
Source File: c:inetpubwwwrootetapplogin.aspx.cs Line: 54
Stack Trace:
[SqlException: Login failed for user 'IT-CELLIWAM_IT-SERVER'.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +484
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372
System.Data.SqlClient.SqlConnection.Open() +384
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +44
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +304
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +77
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) +38
netapp.login.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootetapplogin.aspx.cs:54
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
View 2 Replies
View Related
Mar 12, 2008
I created a .net console application within which I connect to a sql server (not local) as follows,
string conn_str = "Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=QuantEquitySql;Data Source=server name";
SqlConnection conn = new SqlConnection(conn_str);
conn.Open();
.
Everything works fine when I run it from my computer. When I try to run it from a network share I get the following error,
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I am using Visual Studio 2005 and .Net framwork v2.0.50727.
Does anybody know a fix to this problem?
Thanks
View 3 Replies
View Related
Jun 20, 2007
I have a report that uses some embedded custom code. The embedded custom code is a function that execute some sql query on a sql server database.Everything works fine in Visual studio. The report gets deployed on the server successfully, however when running the report from report manager i get the following error message :
The Hidden expression for the table €˜table1€™ contains an error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Here is the code :
************************************************************************
Public function get_field() as string
Dim myConnection As System.Data.SqlClient.SqlConnection
Dim myCommand As System.Data.SqlClient.SqlCommand
Dim data_reader As System.Data.SqlClient.SqlDataReader
Dim field(100) as string
Dim i as integer
Dim j as integer
Dim sql_field as string
Dim nbr_field as integer
Dim rtn_string as string
i = 0
sql_field ="Select field from mytable"
myConnection = New System.Data.SqlClient.SqlConnection("Datasource=xxx.xxx.xxx.xxmydatabase;Initial Catalog=mydatabase;User Id=user1;Password=password1;")
myConnection.Open()
myCommand = New System.Data.SqlClient.SqlCommand(sql_field, myConnection)
data_reader = myCommand.ExecuteReader()
While data_reader.Read()
if data_reader.HasRows then
field(i)= data_reader(0).ToString()
end if
nbr_field = nbr_field + 1
i= i+1
End While
data_reader.Close()
myConnection.Close()
for j = 0 to nbr_field -1
rtn_string = rtn_string + field(j) + ","
Next j
rtn_string = left(rtn_string,rtn_string.length-1)
return rtn_string
'return sql_cmd
'return yes_no
'return lkupfield
end function
******************************************************************
Why do i get the error message ?, is this related to Code Access Security issues with .net framework. if yes
how do i set the Security so the report server or report manager allows embedded custom code to be executed. Any advice ?
Chi
View 7 Replies
View Related
Jan 18, 2008
Hi,
I've written this code multiple times now. But for the first time i get an error at the line underlined. My procedure runs perfectly when i execute it through Sql Query analyzer.
plzz help.. Its urgent and am unable to find the reason for this error "A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll"
Thanks !SqlConnection conn = new SqlConnection(DbConnectionString);
conn.Open();
SqlCommand cmd = conn.CreateCommand();
cmd.CommandText = "dbo.rqryTradesPRR";
cmd.Parameters.Add("@COBDate",SqlDbType.DateTime).Value = "2002-10-31 00:00:00.000" ;
SqlDataReader reader = cmd.ExecuteReader();
while(reader.Read())
{
// have written something here
}
Thanks in advance !
View 2 Replies
View Related
May 17, 2006
Hi all,
Can someone explain it to me why I am getting the following error when I try to connect SQL server express with .NET 2.0?
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Here is my code and i am using windows authentication:
<%@ Import Namespace="System.Data" %><%@ Import Namespace="System.Data.SqlClient" %>
<%
Dim connAkaki As SqlConnection Dim cmdSelectAuthers As SqlCommand Dim dtrAuthers As SqlDataReader connAkaki = New SqlConnection("Server=.SQLEXPRESS;database=akaki") connAkaki.Open() cmdSelectAuthers = New SqlCommand("select Firstname from UserTableTest", connAkaki) dtrAuthers= cmdSelectAuthers.ExecuteReader() While dtrAuthers.Read() Response.Write("<li>") Response.Write(dtrAuthers("Firstname")) End While dtrAuthers.Close() connAkaki.Close() %>
View 2 Replies
View Related
Jul 27, 2006
Hi all--I'm trying to convert a function which I inherited from a SQL Server 2000 DTS package to something usable in an SSIS package in SQL Server 2005. Given the original code here:
Function Main()
on error resume next
dim cn, i, rs, sSQL
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
set rs = DTSGlobalVariables("SQLstring").value
for i = 1 to rs.RecordCount
sSQL = rs.Fields(0).value
cn.Execute sSQL, , 128 'adExecuteNoRecords option for faster execution
rs.MoveNext
Next
Main = DTSTaskExecResult_Success
End Function
This code was originally programmed in the SQL Server ActiveX Task type in a DTS package designed to take an open-ended number of SQL statements generated by another task as input, then execute each SQL statement sequentially. Upon this code's success, move on to the next step. (Of course, there was no additional documentation with this code. :-)
Based on other postings, I attempted to push this code into a Visual Studio BI 2005 Script Task with the following change:
public Sub Main()
...
Dts.TaskResult = Dts.Results.Success
End Class
I get the following error when I attempt to compile this:
Error 30209: Option Strict On requires all variable declarations to have an 'As' clause.
I am new to Visual Basic, so I'm on a learning curve here. From what I know of this script:
- The variables here violate the new Option Strict On requirement in VS 2005 to declare what type of object your variable is supposed to use.
- I need to explicitly declare each object, unless I turn off the Option Strict On (which didn't seem recommended, based on what I read).
Given this statement:
dim cn, i, rs, sSQL
I'm looking at "i" as type Integer; rs and sSQL are open-ended arrays, but can't quite figure out how to read the code here:
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
This code seems to create an instance of a COM component, then pass provider information and create the recordset being passed in by the previous task, but am not sure whether this syntax is correct for VS 2005 or what data type declaration to make here. Any ideas/help on how to rewrite this code would be greatly appreciated!
View 7 Replies
View Related
May 6, 2008
Hello,
I am trying to get results in one row from the following function but all records does not come from the following function.
I have 9 records of the same empid but results not showing all records. Can anybody help me to get all records with the fields and table which I am using.
My table is beneficiary and fields are empid int, fname char(40), benefittype char(4) and benefitpercentage .
Following function is working but problem is not getting all results in one row, as described below.
CREATE FUNCTION dbo.GetBenefString5
(
@Empid INT
)
RETURNS VARCHAR(8000)
AS
BEGIN
DECLARE @ret VARCHAR(8000)
SELECT @ret = ''
SELECT
@ret = @ret + CASE WHEN LEN(@ret) > 0 THEN ',' ELSE '' END + FName + ' ' + Benefittype + ' ' + BenefitPercentage
From Beneficiary
Where Empid = @Empid
RETURN @ret
END
SELECT
Empid,
dbo.GetBenefString5(Empid)
FROM pf25eaton_work.dbo.eaton_chr_benef_05052008
where EmployeeNumber='4500498'
GROUP BY Empid
Result from the above function query:
Empid ----------- ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1773 CHARLENE OLIF 33 ,CHARLENE EADD 33 ,CHARLENE ELIF 33 ,TIMOTHY EADD 33 ,TIMOTHY
(
Records are in the table: (But I have many records like that so definitely I will need counter/function etc to get these data.
FName Benefittype BenefitPercentage
---------------------------------------- ----------- -----------------
CHARLENE OLIF 33
CHARLENE EADD 33
CHARLENE ELIF 33
TIMOTHY EADD 33
TIMOTHY ELIF 33
BRADLEY ELIF 33
TIMOTHY OLIF 33
BRADLEY OLIF 33
BRADLEY EADD 33
Desired Result in one row:
Charlene OLIF 33, Charlene EADD 33, Charlene ELIF 33, TIMOTHY OLIF 33, TIMOTHY EADD 33, TIMOTHY ELIF 33, BRADLEY OLIF 33, BRADLEY EADD 33, BRADLEY ELIF 33
View 1 Replies
View Related
Feb 24, 2008
Hello
I was using SQL SERVER 2000 ... In one table I've created FULL TEXT SEARCHING ( Full text catalog along with full text indexing)
Now we had to install our db in SQL SERVER 2005 standard edition. But while taking script it gave me two lines like:
if (select DATABASEPROPERTY(DB_NAME(), N'IsFullTextEnabled')) <> 1
exec sp_fulltext_database N'enable'
GO
if not exists (select * from dbo.sysfulltextcatalogs where name = N'DEV_CAS_DiagnosisCatalog')
exec sp_fulltext_catalog N'DEV_CAS_DiagnosisCatalog', N'create'
GO
so I used this in the new db creation script...
But I couldn't get where it actually is in SQL SERVER 2005 standard edition.
and also plz help how should we create if it doesn't exist...
What could be the problem....
Thanks In advance
View 3 Replies
View Related
May 8, 2006
I have recently purchased SQL server 2005 for a new install of bespoke software - I have however just been told that it only runs on SQL server 2000 at the moment - is there a way I can install sql 2000 server from the 2005 cd? any help would be greatly appreciated.
thanks
View 4 Replies
View Related
May 19, 2008
Hi Everyone,
I have an ASP.Net webpage for uploading multiple files. The process is, when the client uploads files..using SQL queries I am inserting into a database1 and then calling a stored procedure to remove garbage data from database1 and insert this new data into a production database(Database2).
When the file size is aroung 6-7MB it executes fine....but when the size increases to 30 MB I can see the data in Database1 but only when the Stored procedure is called...after a minute or so, I get the following error in the analyser.
I a getting the following error:Error System.Data.SqlClient.SqlException Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
No Changes made to the ClientPlan table.
Inserting records(s) in ClientPlan table.
No Changes made to ClientPlan table.
Updating changes to PlanStatementInfo.
Updated 1 record(s) in PlanStatementInfo.
Inserting new records into PlanStatementInfo.
No new records were added to PlanStatementInfo.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(SqlConnection connection, CommandType commandType, String commandText, SqlParameter[] commandParameters)
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, CommandType commandType, String commandText, SqlParameter[] commandParameters)
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, String spName, Object[] parameterValues)
at icc.BaseClasses.DL.DLImportPlan.Import(Int32 ClientId, Int32 PeriodId, Int32 UserId) in CDocuments and SettingskroslundMy DocumentskareniccPlanStatementsiccImportDLDLImportPlan.csline 116
Please help me.
View 3 Replies
View Related
Jul 23, 2005
Hey @ all,I have a question:It is possible to convert an existing SQL Server 2000 Database to SQL Server2005?best wishes!
View 1 Replies
View Related
Sep 8, 2005
Given than once SQL Server 2005 is installed, SQL Server Studio has to
be used instead of Enterprise manager, can both SQL 2000 and 2005 be
used on the same machine, be it development or production? (The second
one to be installed probably would be a named instance.)
Any experiance of doing this or a pointer to a Microsoft recommendation would be appreciated.
View 2 Replies
View Related
Nov 25, 2007
System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
View 2 Replies
View Related
May 17, 2006
Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
View 13 Replies
View Related
Sep 22, 2007
i have installed visual express and sql express.
but the problem is i want to add the connection string manuallty in visual studio express 2005.
so i want to add a reference of sql.data.sqlclient but could not add ?
i am not sure what is the problem or is am i missing anything
View 7 Replies
View Related
Feb 1, 2008
I am not able to add the namespace "system.data.SqlClient" and not able to get the intellisense for sqlconnections. I have only vs2005. i do not have sql management express
or sql server 2005
View 16 Replies
View Related
Feb 19, 2004
Hi All,
I am new to ASP.NET and trying to learn. I am getting the problem when I try to insert data into SQL. The exception that I am getting is
Exception Details: System.Data.SqlClient.SqlException: An explicit value for the
identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.
My table name is 'Customers' and its as below.
-----------------------------------------------------------------------
CustomerID--numeric---Identity Seed is 1000---Identity Increment is 1---No Nulls.
Name--------varchar---No Nulls.
address------Varchar---No Nulls.
State--------Varchar---No Nulls.
Zip-----------VarcHar---No Nulls.
PhoneNumber-Varchar---No Nulls.
Email---------Varchar---No Nulls.
and my code is (No fun of my code please--I am a learner)
-----------------------------------------------------------------------
Imports System.Data
Imports System.Data.SqlClient
Public Class register
Inherits System.Web.UI.Page
Protected WithEvents cnNWind As SqlConnection
'Protected drCustomers As SqlDataReader
Protected WithEvents lbladd As System.Web.UI.WebControls.Label
Protected WithEvents lblState As System.Web.UI.WebControls.Label
Protected WithEvents lblcity As System.Web.UI.WebControls.Label
Protected WithEvents lblzip As System.Web.UI.WebControls.Label
Protected WithEvents lblPhone As System.Web.UI.WebControls.Label
Protected WithEvents lblEmail As System.Web.UI.WebControls.Label
Protected WithEvents TxtName As System.Web.UI.WebControls.TextBox
Protected WithEvents txtAdd As System.Web.UI.WebControls.TextBox
Protected WithEvents txtState As System.Web.UI.WebControls.TextBox
Protected WithEvents txtCity As System.Web.UI.WebControls.TextBox
Protected WithEvents txtZip As System.Web.UI.WebControls.TextBox
Protected WithEvents txtPhone As System.Web.UI.WebControls.TextBox
Protected WithEvents TxtEmail As System.Web.UI.WebControls.TextBox
Protected WithEvents BtnSubmit As System.Web.UI.WebControls.Button
Protected WithEvents Label1 As System.Web.UI.WebControls.Label
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
End Sub
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Put user code to initialize the page here
End Sub
Private Sub BtnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles BtnSubmit.Click
cnNWind = New SqlConnection()
cnNWind.ConnectionString = "Data Source=(local); Initial Catalog=cart; Integrated Security=SSPI"
cnNWind.Open()
If cnNWind.State = ConnectionState.Open Then
Dim cmCustomers As New SqlCommand("INSERT INTO Customers VALUES ('',' " & TxtName.Text & "','" & txtAdd.Text & "','" & txtState.Text & "','" & txtZip.Text & "','" & txtPhone.Text & "','" & TxtEmail.Text & "')", cnNWind)
cmCustomers.ExecuteNonQuery()
cmCustomers.ExecuteNonQuery()
cnNWind.Close()
End If
End Sub
End Class
The Error I am getting:
-----------------------------------------------------------------------
Server Error in '/SCart' Application.
--------------------------------------------------------------------------------
An explicit value for the identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An explicit value for the identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.
Source Error:
Line 46: If cnNWind.State = ConnectionState.Open Then
Line 47: Dim cmCustomers As New SqlCommand("INSERT INTO Customers VALUES ('','" & TxtName.Text & "','" & txtAdd.Text & "','" & txtState.Text & "','" & txtZip.Text & "','" & txtPhone.Text & "','" & TxtEmail.Text & "')", cnNWind)
Line 48: cmCustomers.ExecuteNonQuery()
Line 49: cnNWind.Close()
Line 50: End If
Source File: d:inetpubwwwrootSCart
egister.aspx.vb Line: 48
Stack Trace:
[SqlException: An explicit value for the identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.]
System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
SCart.register.BtnSubmit_Click(Object sender, EventArgs e) in d:inetpubwwwrootSCart
egister.aspx.vb:48
System.Web.UI.WebControls.Button.OnClick(EventArgs e)
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
The code works fine If I Dont use Identity Column, But I need to use Identity Column in my Project :( ...Please Help.
View 4 Replies
View Related
Aug 31, 2004
Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
View 1 Replies
View Related
Apr 14, 2007
I'm trying to retrieve an image from my ms sql server 2005, and i'm using VS2005....however, i have the following error during the compilation process Code in webform2.aspx.vb:Partial Class webform2 Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim connstr As String = "Data Source=DCPRJ007SQLEXPRESS;Initial Catalog=mydatabase;Integrated Security=True" Dim cnn As New Data.SqlClient.SqlConnection(connstr) Dim cmd As New Data.SqlClient.SqlCommand("select * from dbo.images where id=" & Request.QueryString("id"), cnn) cnn.Open() Dim dr As Data.SqlClient.SqlDataReader = cmd.ExecuteReader() Dim bindata() As Byte = dr.GetValue(1) Response.BinaryWrite(bindata) End SubEnd Class System.Data.SqlClient.SqlException was unhandled by user code Class=15 ErrorCode=-2146232060 LineNumber=1 Message="Incorrect syntax near '='." Number=102 Procedure="" Server="DCPRJ007SQLEXPRESS" Source=".Net SqlClient Data Provider" State=1 StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader() at webform2.Page_Load(Object sender, EventArgs e) in C:Documents and SettingsAdministratorMy DocumentsVisual Studio 2005WebSitesWebSite7webform2.aspx.vb:line 10 at System.Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
View 4 Replies
View Related
Nov 7, 2007
im getting this error when i try to access the application from the network. but in my computer work fine
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
please help... thanxs
View 6 Replies
View Related
Jul 2, 2006
Hi,
I had make one Desktop application in VB.net, having 6 threads simultaneously running. And each thread connect to sql server and stored the value in DB at every one second. Now my problem is that when I start the application its working fine but after 20-30 minutes exception is occuring.
Login failed for user 'sa'.
Exception StackTrace:
at System.Data.SqlClient.ConnectionPool.CreateConnection()
at System.Data.SqlClient.ConnectionPool.PoolCreateRequest(Object state)
can anybody help me
- Hiren
View 1 Replies
View Related
Aug 31, 2006
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies
View Related
Mar 20, 2004
Aaarrgghhhhhhh, still searchin' for a nice step-by-step article to learn data access (all insert delete update commands) with the SQL Server .NET Data Provider found in [System.Data.SqlClient] namespace....
Can anyone plz help me to find it?
View 1 Replies
View Related
Sep 21, 2006
Hi all,
I need to use the SQLDataSource in Visual Web Developer (VWD) 2005 Express websites. The SQLDataSource must have the .mdf data in the project application. But I have a volume of the .mdb data for evaluation by using T-SQL of the SQL Server 2005 Express and VWD 2005 Express program. Is it possible to convert existing data from .mdb to .mdf? If it is possible, please tell me what software program to use and how to do it.
Thanks,
Scott Chang
View 8 Replies
View Related