I am a Windows developer for the IBM Tivoli Storage Manager Server (TSMS) product. Our product installation is built with InstallShield and uses the Windows Installer.
On a new installation of Windows 2003 x64 Storage Server R2, at a customer's site, the TSMS product fails to install. The install of the OS has version 3.01.400.3959 of the Windows Installer and I see no newer version that installs.
Part of our product is 32 bit (console) and another part is x64 (server). When installing I can see that the install's default is being redirected/reset to C:Program Files (x86)TivoliTSM after it is explicitly set by a custom action to ..Program Files.. . I further observe that our custom actions to write 64 bit registry entries are being refused.
REGSAM samMask = KEY_ALL_ACCESS; if ( regIsWow64Process () ) samMask = samMask | KEY_WOW64_64KEY; lStatus = RegCreateKeyEx( hLocalConnectKeyRoot, szSubkey, 0L, NULL, REG_OPTION_NON_VOLATILE, samMask, NULL, hKey, &dw ) ; The above fails to create the key.
We have tried four versions of our TSMS spanning many changes but the install acts the same. This does not happen on any other Windows OS we test on but we do not test on Windows 2003 Storage Server R2 being that it is an OEM product. We did test on Windows server 2003 R2 x64 and do not see this problem.
Do you have any suggestions on how to tackle this problem? I have full installation traces but can only see that the registry work is being refused. I can't see why.
Using shared folder in windows mobile 5 emulator, it is not possible to create a database (sqlserver mobile 2005) in the emulated storage card.
The error "sql mobile made an unsupported request to the host operating system. Minor Err 25133 is raised. Reading or writing file from/to the emulated storage card occurs without error.
I have created a small COM in C# so that I can programatically create and execute stored procedures with SMO. At this point the COM has nothing in it but just a test prototype. But when I tried to create the object as follows, I get the error indicated below. It is not a memory issue because I have adequate storage and RAM.
Please Help!
DECLARE @object int DECLARE @hr int DECLARE @property varchar(255) DECLARE @return varchar(255) DECLARE @src varchar(255), @desc varchar(255)
-- Create an object. EXEC @hr = sp_OACreate 'SQLInterop.CsharpHelper', @object OUT IF @hr <> 0 BEGIN EXEC sp_OAGetErrorInfo @object, @src OUT, @desc OUT SELECT hr=convert(varbinary(4),@hr), Source=@src, Description=@desc RETURN END
This is the error I am getting:
Error Code: 0x8007000E Description: Not enough storage is available to complete this operation. Source: ODSOLE Extended Procedure
This is the C# code for the COM:
using System; using System.Runtime.InteropServices; using System.Reflection; using System.Runtime.CompilerServices; using System.EnterpriseServices;
// General Information about an assembly is controlled through the following // set of attributes. Change these attribute values to modify the information // associated with an assembly. [assembly: AssemblyTitle("CSServer")] [assembly: AssemblyDescription("Test SQL .NET interop")] [assembly: AssemblyDelaySign(false)] [assembly: AssemblyKeyFile("MyKey.snk")]
// Setting ComVisible to false makes the types in this assembly not visible // to COM components. If you need to access a type in this assembly from // COM, set the ComVisible attribute to true on that type. [assembly: ComVisible(true)]
// The following GUID is for the ID of the typelib if this project is exposed to COM [assembly: Guid("ff35c6b4-81bf-47dd-9290-fcbbb49008d9")]
// Version information for an assembly consists of the following four values: // // Major Version // Minor Version // Build Number // Revision // // You can specify all the values or you can default the Revision and Build Numbers // by using the '*' as shown below: [assembly: AssemblyVersion("1.0.0.1")] [assembly: AssemblyFileVersion("1.0.0.1")]
// the ApplicationName attribute specifies the name of the // COM+ Application which will hold assembly components [assembly: ApplicationName("SQLInterop")]
// the ApplicationActivation.ActivationOption attribute specifies // where assembly components are loaded on activation // Library : components run in the creator's process // Server : components run in a system process, dllhost.exe [assembly: ApplicationActivation(ActivationOption.Server)] namespace SQLInterop { public interface ITest { string SayHello(); string SayIt(String strMessage); }
//[SecurityRole("RBSecurityDemoRole", SetEveryoneAccess = true)] [ComVisible(true)] [CLSCompliant(false)] [ClassInterface(ClassInterfaceType.None)] public class CSharpHelper : ITest { public string SayHello() { return "Hello from CSharp"; }
public string SayIt(String strMessage) { return strMessage + ": from CSharp"; } } }
How to implement distinct storage tiers on SQL Remote BLOB Storage (RBS)?
I want to use this SQL Feature to move files(images, videos, pdf files) from a database to a distinct database dedicated to RBS. Then I want to have several storage tiers, where objects will be saved and moved according access frequency. Old data will be arquived in cheap storage, but it must be always accessible if needed.
Description: - 1st and main tier: new and frequently accessed objects stored in high performance storage; - 2nd tier: automatically move older or less accessed objects to an inexpensive and different storage tier; - in all cases, all objects must be accessible to all users, but accessing to archived objects(2nd tier) will be much slower;
I am Gokul, I am using SQL Server MSEE 2005 (Free ware). Currently I am involved in the development of an application where I am using SQL Server MSEE 2005 and VB.Net. My incomming data size ranges from 5 GB to 7 GB per day. Can I use SQL Server MSEE 2005 as Data base with any licensing or have to get any license for storing larger capacity data.
Hello, I am designing a program for work with SQL Server express 2005. But I don't know what is the data storage limit in this version of SQL Server. What i want is storing about 30000 records in a table of the database. Hasn't SQL Server express 2005 any problem or restrictions for storing the data? Please advice in this regards, Thank you, Mona
I'm in the situation where we are suffering of poor performance on our SAN storage (VPlex) but it is mainly due to the quantity of data of different types which are on it (other applications, other I/O profile, bad storage usage...). As we plan to dedicate an ESX for SQL Server, we decide to have a new storage type. So we will go with NETAPP Clustered Data ONTAP on NAS technology.
Storage team want to enable only NFS protocol, so I'm wondering how SQL Server will handle that ? I read that NFS wasn't optimize for SQL Server and that block level (SAN) should be preferred.
I need to bulk insert very large amount of data into several MSSQLtables.The first Data model definition used identities to mantain relationshipbetween those tables but we found that natural keys (compound) arebetter forbulk insert (there is no need to obtain the identity first)My question is, changing the identities to natural keys (in some tablesinorder of 4, 5 attributes) will enlarge my database storage?I think MSSQL implements relationships with pointers (or hashcodes), sothestorage size will be similar, right?Regards,
i need to know where the database table stored in, where to find the data table without distrubing the sql server editor.whtr it is possible to get it from "C:Program FilesMicrosoft SQL ServerMSSQLData" or some where else.
I Run All checks for Validation cluster.I get Error On Disk Lists And Validation failed.With This error : Failed to prepare storage for testing on node "server name" The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
Whats the limitations of data storage in sqlserver DB. How will be the perforamcne if i have database which will get a data of 400 GB per year and all the data should be there in the table the whole year and then it can be archived.
I am using SQL server 7 with ASP. I have two working environment means one is korean and second it english. - one Korean OS server have SQL server 7.0 and it is my database server - second Korean OS server is only webserver - English OS is win2k and it is only Web server.
1) When i used both Korean server as my webserver + database server then there is no problem to add Korean Data to SQL server On korean OS.
2) But when I try to user English OS server as my webserver and Korean Os server as my database server then I am not able to store Korean Data in Database server insted of it stored some mis/junk/acssi characters in database.
-- I allready try with Korean version of MDAC of English os -- I also try with OEM feature in SQL server client network utility -- When I am use CODEPAGE in my .ASP page then data storage work fine .. but at the time of getting it back there is problem.
If u need any more information about problem then let me know.
So please help me in this regards.
Thanx in advance Anis Vora Partner Global SoftWeb Solutions www.globalsoftweb.com
Will both statements above access only a single page (as it fits into one page) or does the VARCHAR(MAX) always put its data on a separate page. If so, is the null insert treated differently from the '' insert?
I'm aware that it's best practice to separate mdf and ldf files onto separate drives.
However, I see a lot of servers where the underlying disk array is the same for drives on the server.
Is there still any performance benefit to separating mdf and ldf files in this situation?
For example, a single virtual server running SQL Server, with multiple drives attached.All of the drives are connected to a shared storage via iSCSI.There drives C:, D:, E: etc are all actually sharing the same underlying disks.
Obviously, there are some benefits from an administration perspective whereby individual drives can be reconfigured without affecting the others.
Hi all,I'm getting this error when trying to import data from a text file intoSQL Server 2000 (Windows Server 2003) using the DTS import wizard.Any ideas what could be causing this? There aren't any restrictions(that i can find) on the file sizes etc.Thanks in advance.Dave
I've been using SSIS for a while and think I get the gist of how it works (and it works nicely!).
However, because of the configuration on my machine I am constantly moving the dtsx files around (long story). Sometimes I make a full image backup and then later restore those SSIS packages.
The problem is that even if I copy the dtsx files to a different directory and then copy them back (without making any changes) I get a 'Cannot Aquire Connection' message. Other times I get errors that have to do with the encryption of the individual package. For those, I just reset the package to save with a password, save it, and then reopen it and can resave it again with the userkey encryption. This one occured when I move the packages from one machine to another.
Is there a best (or at least good) way to save packages with the sensitive data that won't force me to reconfigure it each time I move a package around? Or have to enter passwords each time?
Also, what is the advantage of saving the files in SQL Server? I assume you are not actually saving the files, just the data about them. I just don't understand it enough to even ask an intelligent question about it.
HI, we are beginning a new project at my company and I was wondering where is the best place to save SSIS packages: file system or SqlServer. I have used other ETL products and they always create a repository on an RDBMS. Since SSIS offers us the choice of DB storage or file system, is there pros and cons of both approach? Will the deployment of our application be simpler by using Sql Server since we would onky move metadata instead of files?
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2 Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid. Msg 3156, Level 16, State 50, Line 2 File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file. Msg 3119, Level 16, State 1, Line 2 Problems were identified while planning for the RESTORE statement. Previous messages provide details. Msg 3013, Level 16, State 1, Line 2 RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
With regards to time zones, daylight savings, and web users, is there a best practice for storing date & time information in a database? For example, my databases are hosted in Time Zone A, but the web users are in Time Zone B. Then, when I create a rss feed (which is displayed in GMT), I add a third time zone into the mix for the same data. To date (no pun intended), I have been entering the date/time data in the time zone of the database server (Time Zone A), and then converting it using an application setting in the web.config file (i.e. TimeZoneBOffset = -1, GMTOffSet = -5). In other words, each time I display a date I calculate what it should be using the time-zone offset in the web.config. This also enables me to account for changes in day light savings, etc. My concerns are three fold: 1. What if I move the database to another server and the time zone changes? 2. Right now the users are in only 1 time zone. If I expand it to several then the offset will have to be by users, which is do-able, but something I haven't had experience with in the past. 3. It is likely more efficient to calculate the time zone once on input into the DB, rather than in each use like I'm doing now. What time zone baseline for insert into the db should I use? Thanks in advance for your help! PS My application is primarily looking at 'smalldatetime' data - down to the 'minute' level.
I have come to know from the SQL Server documentation that the Hardware Security Modules (HSM) can be used for Cryptographic Key storage within SQL Server to increase the level of protection of data at rest. We provide a HSM Solution which protects cryptographic keys and performs cryptographic operations onboard. The aforesaid fact about SQL Server and HSMs motivates us to test our HSM product with the SQL Server. Our HSM solution provides SDK for applications/servers to communicate with the HSM hardware. The SDK basically consists of two libraries:
-MS CAPI Interface (CSP Library)
-PKCS#11 Interface (cryptoki Library)
I have found this forum best for such kind of discussion. So could you guys on the list let me know:
- How the CSP or PKCS#11 library can be integrated with the SQL Server for HSM box to protect the cryptographic keys?
- Would I need to write a new Interface/Wrapper for this integration, If yes please help?
I have a group of about 5 servers (which will likely grow toabout 25 in the near future) with their names listed in a table in a database on one of the servers. I want to query all servers in that table using the following query to pull the storage drive, database name, created date, age and size of the databases for each server listed in the table:
SELECT left(mf.Physical_Name,2) AS Storage_Drive, DB_NAME(mf.database_id) AS DatabaseName, db.create_Date, DateDiff(day, db.create_date, getDate()) Age, sum((mf.size*8))/1024 SizeMB
[Code] ...
How would I best accomplish this if I want to implement it using a TSQL procedure?
Hello Everyone and thanks for your help in advance. I am developing a document storage application for an intranet that will store various Word, Excel, and PDF documents. Most of the examples I see utilize SQL Server and an image field rather than the FileSystem Object to store documents. My concern with this method is that some of the documents may be several hundred pages (not exactly sure of the actual file size yet, but they must be fairly large). My question is, where does the use of SQL Server become impractical for this type of application? Any insight would be greatly appreciated. Thanks.
Does anyone know the upper limit of data size that one SQL 2K table can hold. I've seen 50GB tables in some warehousing servers, but what is the true limit. Soes the limit vary with the SQL2k version?
I have an MSDE installation on Windows server 2003. It looks like the C: drive is taking the brunt of the data when I load up the database. I would like to specify a different drive for data...Is there a way to do this?
How should i know size of the table in the DB. suppose my DB has 5 tables and the size of the DB is 500 MB. How can I know size of the indivdual table.
I'm migrating a images DB of a system I know the structure of the data tables and all type of data in it How can I learn about the STORAGE of IMAGES? In sql Server Where can I found information about that? I need to know something about that topic usually, whats the way for image’s storage ?
