Hi,
With SQL Server 2000, the Enterprise Edition was required to access
Analysis Services across domains.
Is this also the case in SQL Server 2005, that the Enterprise Edition
is needed?
Thanks, S
Hi,
I have some questions about SQL Servers 2000 and 2005 compatibility.
In my configuration I have to use both servers.
The cubes are stocked in 2005 server.
May I transfer from 2005 to 2000 Analysis Services the cubes?
If yes, what is the procedure? The result of migration is the same in the two different versions?
If not, how can I solve this problem?
Thanks in advance.
Is it possible to configure transnational replication between two different domains also non trusted domains.
It's possible means what i need to take care before configure replication and how to configure transnational replication between two different domains.
hii
what is SQL Server Analysis Services 2005 ??
thank you
Hi to all
I have a complex scenario , so first I want to ask out the feasibility of it . I think its better if I state the scenario and some one on this forum reply to it , I need to build an application (e.g credit card application , Loan Application etc ) that requires some approval from expert , what I firstly want is that I apply datamining on this data so that next time when I enter the data the result (approval or reject ) should be given by datamining tool , this I gather is poosible by using Analysis Services in SQL 2005 , but I also want the bases of that decision ( I mean the rules/some thing else that the Datamining created agaisnt the data entered ) , So can any one do any help on this , you can also reach me at razi_rais@yahoo.com . its preety much urgent so your prompt response is higly appreciated.
Thanks and Regards
Razi Bin Rais
I made an analysis services project but I can't deploy it because it can't find the server
I search for the analysis service in the Service Control Manager but I can't find it.
Is it possible to download and install it with this version of sql server (workgroup) ?
We have an Enterprise setup with multiple domains.
We a Domain A with SQL server 2008R2 say SQL-A and Domain B with SQL server 2008R2 ( SQL-B). It will be like SQL-A will always access SQL-B. Reverse is not required.
In Domain A we have a .Net Application which accesses SQL-A to perform CRUD operations which ultimately come to SQL- B since all SQL tables exist in SQL- B only.
Need to know the right way to implement Linked Server from SQL-A to SQL-B, so that Domain issues as well as DML execution work smooth.
I need not worry about DDL in SQL-A And SQL-B as it will taken care of by network and H/W team. I just need to focus on as developer.
Hi, all here,
Would please anyone here give me any idea about how can I connect to SQL Server 2005 analysis services server and send XML request to it programmatically (with Business intelligence development studio in SQL Server 2005)? Thanks a lot.
With best regards,
Yours sincerely,
Does anyone have instructions on how to configure http access to SQL Server 2005 Analysis Services on Vista?
View 5 Replies View RelatedI'm looking for a new way to publish reports based on OLAP data and was very disappointed to find that Reporting Services does not natively support displaying MDX query results in a matrix. While it is possible to assign an MDX query to the matrix control in Reporting Services, the two main problems are that the columns of the query must be measures (not dimensions), and it does not support display of server based formatting (fore color, back color, and font flags).
Does anyone know of any custom control that properly deals with Analysis Services data?
Thanks for any info you have!
I have, a SSAS 2012 tabular instance with SP2, there is a database on the instance with a read role with everyone assigned permissions. When configuring the Power BI analysis services connector, at the point where you enter Friendly Name, Description and Friendly error message, when you click next I receive the error "The remote server returned an error (403)." I've tested connecting to the database from Excel on a desktop and connect fine.I don't use a "onmicrosoft" account so don't have that problem to deal with.
We use Power BI Pro with our Office 365. As far as I can tell that part is working ok as I pass that stage of the configuration with a message saying connected to Power BI.The connector is installed on the same server as tabular services, its a Win2012 Standard server. The tabular instance is running a domain account that is the admin account for the instance (this is a dev environment) that account is what I've used in the connector configuration. It's also a local admin account. There is no gateway installed on the server.
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server
Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file
SQL Server 2005 + Service Pack 2
Can anyone help?
Andy
Hi All,
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
Regards,
Joseph
Hi all,
How can I Import a database from Analysis Services database to SQL SERVER using SQL SERVER 2005.
forexample the Adventure Works DW database from Analysis Services to SQL SERVER database.
Any ideas will be higly appreciated.
Thanx
Hello,
i have a small problem with the data sources in the reporting services, maybe you can clarify the situation... I have a MS CRM 3 solution with the reporting services 2005 installed. From an other vendor we have a arcplan solution on the 2000 analysis services. I would like to get access from the 2005 reporting services to the 2000 cube. Is this possible? Ive read that the SSMS cant connect to the 2000 cubes. Can i connect from the reporting services??
thank you
regards
Andreas
Hi all,
I have a production website at Godaddy and an ASP.net 2.0 page that successfull connects to a SQL 2005 instance provided by Godaddy using SQL authentication(User ID/Password). The Godaddy database has become too small (200MB limit) and the plan is to use the SQL Server 2005 standard edition at my office. In other words, I want to host my own SQL server and keep the front-end at Godaddy.
The ASP.net test page at Godaddy generates the basic connection errors when attempting to connect to my SQL server at the office. This error has several variations depending on how the connection string is configured:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)
In this case the connection string is:
Data Source=xxx.xxx.xx.xxx,1433; Network Library=DBMSSOCN; Initial Catalog=Test; User ID=xxx; Password=xxx"
I've embedded this connection string directly into the ASP.net test page in order to make this page independent of the web.config file.
My MS SQL server is on a Small Bussiness Server 2003 with Sharepoint and Remote Workplace running, and this machine is behind a linksys router, and Routing and Remote Access is running in place of windows firewall.
I've openned ports TCP 1433 and UDP 1434 on the router and Routing and Remote Access. Telnet xxx.xxx.xxx.xxxx 1433 connects successfull, and the SQL log shows listening on 1433. I don't know if telnet is telling me that there is successful connection to the port on the router, or if it makes it all the way to the SQL server.
The SQL server is running the default instance MSSQLSERVER. Locally, I am able to connect using SQL 2005 Studio, and I am able to confirm this activity in the SQL log. Since I've openned port 1433, I also see numerous dictionary attacks in the SQL Log. Based on this, remote connectivity is there.
The strange observation is that the SQL log shows no sign of a connection attempt from the ASP.net page. The connection appears to be failing before it reaches the SQL server. I've openned ports in the Linksys router and the NAT/Firewall the same way I've openned them for Sharepoint and Remote Workplace.
I also found that when I move the ASP.net test page to another ISP, then the SQL connection that worked from the Godaddy website, is no longer able to connect. An explanation of this would also be very helpful to me.
Is there something that needs to be configured to expose the SQL server to ASP.net pages that is different from remote access?
Does IIS need to somehow be involved?
Is there something in Small Business Server 2003 that could be interferring with ASP.net page requests to the SQL server?
Do I need to run my machine as a web server to make this work?
Any help with this configuration would be greatly appreciated.
Can I have a SQL 2005 database as the datasource for Analysis Services 2000? If Yes, what Driver should I use to connect to SQL 2005?
Prakash.P
The secret to creativity is knowing how to hide your sources!
I have SQL 2005 SP1 already installed and I am trying simply to add Analysis Services in without screwing anything up.
I re-run setup from the original CD, but then I receive the following warning:
To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.
Can I safely continue with the installation and just check Analysis Services since it is just a warning? And after the install re-run SQL 2005 SP1 or is there a way to add this from the SP1 installation files, please help.
I have been geting an error every once in a while shown below:
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.; 08S01.
I look at other messages here and found people that say it is a network communication problem, but I am runing Analysis Services and SQL 2005 on the same box. Can anyone help with this?
Thanks
Pat
Will Analysis Services 2005 work against a SQL Server 2000 database without SQL Server 2005 installed? Does Analysis Services 2005 require SQL Server 2005?
I have a data-centric application using SQL Server 2000. Personally, as a developer, I would love to upgrade to SQL Server 2005, but that's really not an option for another year or so for business reasons outside of my control.
I would like to add an Analysis Services cube based reporting system on top of my existing relational database. I've heard Analysis Services 2005 is much improved over 2000 and would really like to use that. Is this at all possible?
I've also heard of problems when installing SQL Server 2005 on the same system as SQL Server 2000. This makes testing the waters very difficult for me as I'd have to use a completely separate dev system.
Hi,
I need to calculate the average of an existing measure of my cube.
The measure is PA_Salaire from a column of my fact table.
I would like to calculate an average i could use with all the dimensions of my cube but i think i can only create one linked to a single dimension. Is that true ?
I dont really understand the way i should write my request. Here is what i did:
(Manager is one of my dimensions, it has a parent child relation... is that a problem? does it change the way i should do?)
Avg(Descendants([Manager].CurrentMember, [Manager].[Name]), [Measures].[PA Salaire]
But that doesnt work at all i get the following result: " #VALUE! " for every manager
Thx for your help
Francois
My first question is can I run Analysis Services 2005 on a different server to where the databases are running
If yes, any pointers to some articles.
I have the next problem:
i have MS sql server 2005 installed in a server.
We have some olap cubes in the server deployed with analysis services 2005.
When we try to connect to the analysis server from a client pc using pivot tables we obtain this error:
"Errors in network layers. Error code=0XC10D0009, External code=0x00000000"
The client pc has panda antivirus (corporate) with true prevent
When i unisnstall it, we can connect to the analysis server and to the cube normally and when we install the antivirus again (without true prevent and with the minimun options) the problem starts again and we can't conect to the analysis server.
Anybody had a similar problem?
Anybody knows a solution for it?
Thanks
Jose
coormx@yahoo.com.mx
Hi experts,having a parent-child-table with the columns child_id, child_name, parent_idin SQL Server 2005 I just cannot create a parent-child dimension in BI DevStudio. Can anyone give me some hints? The Dim Build wizard doesn't createthe hierarchies, manually setting "parent" property to parent_id and "key"to child_id as well as dragging and dropping the stuff into the hierachyfield haven't just led to success. I also tried to right-click bothparent_id and child_id to create a member property. It just never workedout.Any help would be greatly appreciated.Kind regards,Joerg
View 1 Replies View RelatedHi,
I've been trying to use Analysis Services 2005 Cube as a data source, query it via MDX and then use the data returned elsewhere in SSIS.
However, I've been unable to get this working and can't find any information regarding how this can be done. Surely it should be possible when I can get this working even in Excel?
I've looked in December edition of BOL and no luck - have also sent a feedback to BOL regarding this and have been told that "it should be possible, since there is a way to send SQL queries to AS." However the person I was speaking with knew of no one who had actually tried this scenario and to try posting here.
Any help as to how to get this done would be greatly appreciated.
NR
I've got a RS2000 report from Analysis services 2000. This report is working fine but after the upgrade to SQL2K5, i'm having issues with changes to parameters.
Basically i'm passing DateQuarter, CustomersLevel as parameters to the following mdx script. I've tried to change mdx script in RS2005 but no luck yet. I don't much about the parameter level changes in sql2k5. So can anyone suggest what is wrong in the script.
In sql2000 the script looks like this...
="with " &
"member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)' " &
"Member [Measures].[CustomerUniqueName] as '[Customers By Class].currentmember.UniqueName' " &
"Member [Measures].[CustomerDisplayName] as '[Customers By Class].Currentmember.Name' " &
"SELECT " &
"{[Measures].[CustomerUniqueName],[Measures].[CustomerDisplayName]} on Columns, " &
"filter({descendants(" & Parameters!CustomerClass.value & ", [Customers by Class].[" & Parameters!CustomersLevel.value & "], SELF)}, " &
" [Measures].[Ex Price] > 0) on rows " &
"from Sales "
i've changed the script in sql2005 but not working yet..
with
member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)'
Member [Measures].[CustomerUniqueName] as '[Customers By Class].currentmember.UniqueName'
Member [Measures].[CustomerDisplayName] as '[Customers By Class].Currentmember.Name'
SELECT
{[Measures].[CustomerUniqueName],[Measures].[CustomerDisplayName]} on Columns,
filter({descendants( STRTOMEMBER(@CustomerClass), "[Customer Class]." + STRTOMEMBER(@CustomersLevel), SELF)},
[Measures].[Ex Price] > 0) on rows
from Sales
Thanks in advance..
Vivek
hello,
Is there anyway that I can connect InterSystems Caché to analysis services 2005?
When I try to create data source in Analysis service, I cannot find ODBC support.
Thanks,
Negin
Hello all, I´m a beginner on AS2005 (but I know pretty well AS2000), I migrated a cube from AS2000 to AS2005 but in this cube I have a Custom Rollup Formula on two levels of my Time dimension (month and week), an example of the week level formula is the next:
iif( [Time].CurrentMember.Name = [Time].CurrentMember.NextMember.Name,
null,
iif( [Time].CurrentMember.Name = [Time].CurrentMember.PrevMember.Name,
Sum({[Time].CurrentMember.Children,[Time].CurrentMember.PrevMember.Children}),
Sum([Time].CurrentMember.Children)
)
)
<<this formula overrides the week aggregations>>
and I really need this but I cannot find on AS2005 where to do the same thing, someone can tell me where can I define Custom Rollup Formulas and how?.
Thanks in advance!
Do anybody know if Analysis Services 2005 allows cashing (storing) calculated members ?
There is a cube in Analysis Services 2000 with a calculated member based on some running sums. The performance of MDXs is too slow because running summs are being recalculated for each member of time dimension on each call.
I think that caching calculated members might help me and hope that this feature exists in Analysis Services 2005 .
Thanks!
A rather dumb question but I've installed an evaluation copy of SQL 2005 on my machine and a colleague would like the Analysis Services Data Mining capability on his machine (without the eval SQL Server).
Is there a license associated with such an installation when we buy 2005 or does it fall under client components which can be installed on any number of users machines?
Matt
Hello,Can I import an OLTP (Reltional DB) as a Data Source into SQL ServerAnalysis Services 2005 and then use the Cube Wizard and the new DataSource View feature to create the OLAP model ?Or do I have to first design an OLAP Data Warehouse with a Star Schemaand then import this DW as a Data Source into my Analysis ServicesProject.With SQL Server 2000 , OLAP would be the way to go..but with SQLServer 2005 , it seems as though the wizard and data source viewfeatures do half the work for you.I have an OLTP DB and am not sure which route I should take ! Anysuggestions / input would be much appreciated.Thanks in Advance...RegardsRusszee
View 1 Replies View Related
Hi ,
I am using sql server 2005 standard edition and i have installed MSXML core services 6 and also ADOMD.net for analysis services.
i am using visual studio 2005 version of 8.0.5072742 and the problem that i am facing is when i use to develop reports using Analysis services as a data source , the error message pops up and VS 2005 gets crashed.
i could define the dataset , layout part and when i prees the preview , it gets crashed.
could any one help me on this problem to sort out.
Regards
RMP
Hi
What is the diff between the above 2?
Thanks.