Hi,
I have over 200 stored procedures and they have dependencies on each other (not necessarily a cyclic dependency).
Is there a way in SQL Server 2005 that I can disable a dependency check while I am executing a script that creates those stored procedures, and then re-enable it after?
Thanks.
Is there anyway to check for cross-database dependencies?
For example:
I have a stored proc in the Pubs database that contains a query that references a table in the Northwind database (as well as reference a table in the Pubs database.) I'm having no problems finding the depencency for the Pubs table. I can't seem to find the dependency for the Northwind table.
Any help would be appreciated.
Thanks in advance.
Scott
Hi All,
We have a very convoluted ETL system which is pulling unnecessary data. First thought is to restrict everything so that only the columns/tables that are necessary are brought back. We have a tons of reporting stored procedures that depend on ETL tables, is there anyway we can find out which column/tables these stored procedures are using?
Thanks!
Hello All,
Can i disable export to Excel sheet in ms sql server 2005 reporting services.
This is due to security reasons as the client doesnt want the reports to be send via mail.
Can someone provide the solution on how to disable export to excel
Thanks
Pritam Shetty
I am building a web app using VS2005 and SQL 2005 I would like to use the Caching Application Block to cache objects from my BLL. I was wondering if there is a way of utilizing the build in SQLDependency in SQL 2005 with the Caching Application Block??? Does anybody have tried this, are there any samples on the web???
Thanks,
Newbie
I need to deploy some SSIS packages onto a remote Integration Server machine. Hence
I wrote a VS 2005 Setup with Custom Action (C# Installer class) which uses the
SSIS DTSX Dlls to deploy the Packages onto an Integration Server. I am shipping
all the necessary DLLs in the MSI itself, so that the MSI can run on any client
machine having just .NET 2.0 Framework installed.
When I run the Setup on a Machine having Integration Server, the Setup works
fine and the Packages are deployed.
However, if I try to run the MSI on a machine which just has the .NET 2.0
Framework installed, I get the following error.
SqlServer.DTS.Runtime.Application could not be created. Retrieving the COM
class factory for component with CLSID
{E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error.
80040154
I am not sure whether any of the DLLS are COM components. I believe all are
Managed DLLs.I believe SSIS 2005 looks like a pre-requisite but I don't need that.
Please help. I am posting this query here, as I believe ppl writing SSIS Packages may have faced this issue.
I want to set up a simple check constraint on a column limiting to values "Yes", "No" and ""I'm trying to use:CONSTRAINT IsAccessToItRestricted_ckcheck (IsAccessToItRestricted in('Yes,'No','');but this is not the right syntax.............. help!
View 1 Replies View RelatedHow does one check which port SQL Server is listening to? How does one know if it is 1433 or 1434?
View 8 Replies View RelatedI recently updated a default instance of SQL Express to Service Pack 2. When I tried to attach my database I got an error "Login failed for user SA. The user is not associated with a trusted SQL server connection".
I found that my SA account for the instance was locked out. I unlocked it and everything worked again.
This happened to my on two different PC's using a default instance of SQL Express. Does anybody know why SA is being locked out? Thanks in advance.
Hi Friends,
I am Ravi, I need a help.
My case is like.. i need to upload data from csv file into sql server 2005 data table.
but before that I need to check integrity of data
for example:
let us say csv data is like
ISD CODE,STATE,NAME,QUALIFICATION
91,AP,KIRAN,MCA
01,MC,MIKE,MS
here i have to check that, wether there is an entry in ISD codes table for 91 and 01 (india and us)
similarly AP , MC (Andhra Pradesh and MISSICippi)
please suggest me a nice approach, no of records in ISD codes and States will 350-450 records.
thanks in advance
Ravi K
Hi..
I have a web application(ASP.NET 2.0 + C#). I have sql server 2000 as well as sql server 2005.
Several queries in my application work well with the sql server 2005, and the same query fails in the sql server 2000.
How to check if the database is connected to sql server 2000 or sql server 2005 and then call the queries accordingly through the c# code?
Thanks
I have used the notification-based cache invalidation with my web application, but how can I check it really works? I mena if the backend data didn't change , the data will come from cache not from the database?
<asp:SqlDataSource ID="SqlDataSource_WebInfo" runat="server" ConnectionString="<%$ ConnectionStrings:LocalSqlServer %>" SelectCommand="SELECT simplified, traditional FROM temp" ProviderName="System.Data.SqlClient" EnableCaching="True" SqlCacheDependency="CommandNotification">
</asp:SqlDataSource>
Thanks a lot!
I installed SQL Server 2005 Enterprise, then SP1 and then SP2, Maintenance Plan worked. But if I installed SQL Server 2005 Enterprise and then SP2 directly (skipping SP1), the Check Database Integrity in Maintenance Plan was not working. The error message is as follows:
Executed as user: DomainSqlServiceAccount. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:56:21 AM Could not load package "Maintenance PlansTest Plan" because of error 0xC0014062. Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login failed for user ''. The user is not associated with a trusted SQL Server connection.). The SQL statement that was issued has failed. Source: Started: 10:56:21 AM Finished: 10:56:21 AM Elapsed: 0.047 seconds. The package could not be loaded. The step failed.
Other tasks like Rebuild Index seem to be fine. SP2 is supposed to be inclusive. Does anyone have any ideas on why this is happening.
Thanks
E.G.
I have implemented SQL cache dependency to invalidate cache whenever the result of the stored procedure gets changed. The stored procedure is written obeying all the notification rules.
Our problem:
As long as we are working on Local machine, Development server or Pre production server its working fine means the cache gets invalidated whenever there is any change in the result set. But the same implementation doesn’t work in Production. Cache does not get invalidated.
Difference in Production environment and other environment:
Production uses cluster SQL server, others use standard SQL server. Production has load balancing means application is deployed on 6 servers which hits same clustered SQL server. In application’s global.asax file i have Start dependency so I see 6 different notifications started in SQL server which is right. But whenever there is a change in result set the cache doesn’t get invalidated in any of the application.
My question is
Do we have to follow any different kind of implementation of SQL cache dependency for web farm and cluster SQL server scenario?
On the same note I would like to add, on the same SQL server I have one more database and a different application is accessing this database. This application is also using SQL cache dependency and its working fine. The only thing this .Net application is NOT deployed on web farm. Its deployed on single application server.
Probably a dumb question, but if one is using SQL Server 2000 instead of 'SQL Express' what has to change here, in order to set up caching? What changes in the paths?
http://beta.asp.net/guidedtour2/s22.aspx
I want find all dependent objects related to a table. I am using -
SELECT DISTINCT so.name
INTO #tmp
FROM dbo.sysobjects so
JOIN dbo.SysComments sc
ON sc.id = so.id
WHERE sc.text LIKE '%tablename%'But, I want all those SP/functions/views that use the output of this query and so on...
Eg.
Table -> used in usp1 -> usp1 used in usp2 ...and so on
I have a service that depends on SQL Server service. Basically we make sure that our service only starts after SQL server service started. Unfortunately this dependency does not ensure that database is available.
Basically I observed in Application log that SQL server reports that it started to listen on a port. And then I see that recovery process started. As I understand SQL server is not available while database is in the recovery state.
Note: I might have not used a correct terminology to describe SQL server recovery process as I don't have access to Application log with the exact message at the moment. I can verify the message if necessary.
Because SQL server service is started our service starts and attempts to connect to the database. Service fails to connect to database, because of the restoration process. Once restoration is done service connects successfully.
I observed that restoration process starts every time machine is rebooted. It only takes a few minutes to run, but it is enough to generate a number of error messages in event log about failed SQL connections.
My first question is: Is it normal for database to enter into recovery state every time machine is rebooted?
My second question is: If it is a normal operation, is there any way to detect that SQL server is truly available, so our code does not have to try retry establishing connection many times
I am upgrading my application's SQL Server from 2008 R2 to 2012.
As discussed in the below URL I am able to see the Identity jump after I upgrade and the server is restarted.
Now since I cannot afford this and at this moment I do not have the time to create a sequence with NOCACHE and test it again I have to go ahead and add trace flag 272 in the start up parameter as this is the only solution which I can implement and even rollback without much hassles.
[URL] ....
What I got to know, this flag will disable the new feature of IDENTITY property that has been implemented as part of SQL Server 2012 and will make it work like it was doing in SQL Server 2008 R2.
But I want to know implementing this flag would impact any other feature or performance (except the performance of IDENTITY) of SQL Server.
I have to disable newly implemented database encryption. It's a necessity unfortunately. Can I do this during production hours without much of a hit? I know I have to restart the instance after it's done. Can I expect performance impacts or other issues?
View 1 Replies View RelatedWe are looking at going down the High Availability Always On route. However we have some concerns around the lack of support for MSDTC. In short we are concerned that developers may introduce functionality either on purpose or by mistake that uses the or escalates the Query’s to the MSTDTC. As this could result in database splitting.
Understand that this will be a moot point in SQL 2016 but for 20122014 is it possible to disable the MSDTC to protect against this and run High Availability Always On. ? Does it just need to be disabled on the SQL Server or does it need to be done on the application server ?
Hi
I am creating a report on a database where some of the table names start
with the @ sign - ie @table1.
Reporting services picks this up as a parameter, instead of a table name in
my query, even though I am encapsulating the table name in square brackets
eg. [@table1]
I have several data sets in the report that i am using to populate valid
parameters. These datasets are all variations of queries from tables that
have @ as the first character.
When i then try to run the report i get an error message as follows:
"The report parameter pool has a default value or a valid value that depends
on the report parameter SD_POOLCONTRACTS. Forward dependencies are not valid"
This is frustrating as SD_POOLCONTRACTS is not a report parameter but one of
the database tables that has @ for it's first character.
here is the query that i use to obtain the valid values for the pool report
parameter that i am trying to set up.
SELECT distinct u_poolcode as Pool
FROM OCRD INNER JOIN
OCRG ON OCRD.GroupCode = OCRG.GroupCode INNER JOIN
CRD1 ON OCRD.CardCode = CRD1.CardCode inner JOIN
[@SD_POOLCONTRACT] INNER JOIN
[@SD_POOLCONTRCT_LINE] ON [@SD_POOLCONTRACT].DocEntry
= [@SD_POOLCONTRCT_LINE].DocEntry INNER JOIN
[@SD_CONTRACTS] ON [@SD_POOLCONTRCT_LINE].U_DocNo =
[@SD_CONTRACTS].DocNum ON
case when len(ocrd.fathercard) = 0 then ocrd.cardcode
else ISNULL(OCRD.FatherCard, OCRD.CardCode) end = [@SD_CONTRACTS].U_CardCode
WHERE (OCRD.CardType = 'c') AND (OCRG.GroupName LIKE N'producer%') AND
(CRD1.AdresType = 'b')
ORDER BY OCRG.GroupName, FatherCard, OCRD.CardCode
Any help would be appreciated.
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
how do i check whether i have installed 64 bit /32 bit sql server 2005... if i see Program files and Program files (x86) directory can i be sure...
one more query..Is windows 2003 enterprise edition 64 bit Itanium based operating systems
Thanks in advance
Hi All
I designed a maintenance plan in 2005 it create job in SQL Server Agent-->Jobs when i right click on job to check the properties it doesn’t give me the details of that job instead it open the window for new job which is not the case in 2000. Can some one there please let me know how to check the job details in 2005in GUI not in terms of T-SQL
Regards
I'm trying to check if a certain table exists in a given database on a SQL 2005 Server.
I've tried numerous times without any result.
can anyone point me in the right direction?
I need to disable a trigger for a week w/o droping it. Is there a way in sql ?
Thanks and nice week-end.
Ivan
Please help if you can! I have setup a job that runs every day on an hourly basis. Every morning I find that it's been disabled. The funny thing is is that the schedule is disabled, but the job is not (you see 'Enabled' in the jobs list in EM, but when you view the schedules tab, it's disabled.) Also, it runs a several times before becoming disabled.
TIA,
Colleen
I have a server that was being used for logshipping and had
replication set up at some point as well. One of the databases got out
of sync in the logshipping process so I removed logshipping and was
going to reinitialize the database and set up the logshipping again.
The database is in read only mode and when I try to take it out of
read only I get the following message:
Error 5063: Database 'XXXXXXXX' is in warm standby. A warm stanby
database is read-only. ALTER DATABASE statment failed. sp_dboption
command failed.
I have tried to disable replication on the server but get the
following error message:
SQL Server Enterprise Manager could not disable 'SRVXXXX' as a
publisher.
Error 3906: Could not run BEGIN TRANSACTION in database 'XXXXXXX'
because the database is read only.
So my problem is that I can't take the database out of read-only mode
because of replication and I can't disable replication because the
database is in read-only mode.
Has anyone come across this before and how should I resolve it? I
tried dropping the database as well and that didn't work either.
Any ideas or help would be greatly appreciated.
Thanks in advance,
Brad
Hi,
I have a update trigger on a table. Can I disable this trigger for duration of a job which updates this table.
Thanks in advance ...j
Is there a way to disable a trigger when performing a transaction besides dropping and recreating the trigger? I am trying to perform an insert on a table, and this keeps firing a trigger that I want to disable.
Any help is appreciated.
I have accidentally registered an existing database as a distribution database, which made it a system database.
the data itself is safe and sound, but I want to undo the whole thing.
How can I do this?
I have an SQL job that runs a .vbs script. It has the following code:
Cmd2.ActiveConnection = Conn2
Cmd2.CommandText = "USE msdb EXEC sp_update_job @job_name = 'Email Download',@enabled = 0"
Cmd2.CommandType = 1
Cmd2.Execute()
It's not disabling the job. If I execute in Query Analyzer, it works. I'm thinking it might be a permissions issue. Any suggestions?
TIA
Hii have a table with primary key defined on col1 and col2. now i want tohave col3 also included in primary key. when i alter the table it givesme error for duplicate rows. there is an option for 'with nocheck' butit only works with check or foreign key constraint. is there any optionin sql server like in oracle 'no validate' which doesnt validate theexisting data and force the data validation from new records.thanxFarid*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 5 Replies View Related