SQL Server 2005 EE Install Errors Completely Stopping My Progress
May 29, 2008
Trying to install SQL Server 2005 x64 Enterprise Edition during the "Workstation components, etc." part of the install, the install stops and gives me this error.
----------------------
Microsoft SQL Server 2005 Setup
Failed to install and configure assemblies C:Program Files (x86)Microsoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024893
Error message: The system cannot find the path specified.
Error description: Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the path specified.
[Abort] [Ignore] [Retry]
----------------------
This install is being attempted on 3 seperate servers all running Windows Server 2003 R2 Enterprise x64 Edition (Service Pack 2).
Futher notes:
Distributed Transaction Coordinator services is setup and running (started).
I checked to make sure there are no MSMQ components in the COM+ Application struture in Component Services.
View 3 Replies
ADVERTISEMENT
May 23, 2005
I installed sql2ksp3 from the CD I received in my ASP.net book. The installation went fine and then I went to the DOS prompt and did the setup SAPWD and it ran. I restarted my computer and opened ASP Matrix and went to the Data tab and proceed to connect to the server. It gave me an error message it couldn't connect. So I uninstalled MSDE and made sure the sql2ksp3 folder was gone. So I went ahead and installed the sql2ksp3 from the CD again and then went to DOS to do the setup. It ran through the setup until the very end, saying it couldn't setup the server. I have tried it several times and it always stops around 11 seconds. I have tried to install the download from microsoft instead the CD and that didn't work also. So at this point I am stuck. PLEASE HELP!
View 7 Replies
View Related
Jan 20, 2007
I cannot use, remove, or reinstall Microsoft SQL Server 2005. Although Microsoft SQL Server 2005 and Microsoft SQL Server Setup Support Files appear in ControlPanel-ARP, when I attempt to remove Microsoft SQL Server 2005, the workstation component remains. If I try to download and reinstall Microsoft SQL Server Express from the Microsoft website, the download does not install completely as described below.
My current situation is much better than the previous incompatibility or configuration problems I had been experiencing between Microsoft Office Small Buisness Accounting 2006, Microsoft Office Outlook 2003, Outlook Business Contact Manager, Microsoft SQL Server 2005 (express edition installed in conjunction with Visual Basic 2005 express), and Microsoft SQL Server Desktop Engine (installed in conjunction with Small Business Accounting 2006). The problems and error messages previously included: 1) A consistent bootup error (Net service configuration error...The specified service does not exist as an installed service); 2) The inability of Visual Basic to connect to an instance of SQL server (An error has occurred while establishing a connection to the server...); 3) a SQL server configuration manager error: Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 servers with SQL server configuration manager. Invalid namespace [0x8004100e]; and 4) SQL server management studio express error: Cannot connect to <computername>SQLEXPRESS... An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1).
These problems have been partially solved by: 1) completely removing Small Business Accounting 2006, Outlook Business Contact Manager Update, and MSDE (which appear to be codependent); and 2) removing and reinstalling Visual Basic 2005. However SQL Server still cannot be completely removed or reinstalled and therefore Visual Basic cannot connect to SQL datafiles.
When I most recently tried to remove SQL server 2005 using ARP, the installer reported that only the workstation component remains (Version: 9.00.1399.06 Edition: Express Edition Patch level: 9.00.1399.06), but is not removed by the ARP process. When I most recently tried to install SQL server 2005, the Setup Support Files install correctly, the System Configuration Check passes, but setup fails for MSXML6, SQL Server Database Services, and WorkStation components Books Online (detail log SQLSetup0068 file). According to Add/Remove programs, the following applications are installed:
Microsoft Visual Basic 2005 Express Edition ENU
Microsoft SQL Server Native Client
Microsoft SQL Server Setup Support Files (English)
Microsoft SQL Server VSS Writer
Microsoft SQL Server 2005
Various MSXML versions
Any help in un/reinstalling or configuring Microsoft SQL Server 2005 for use with Microsoft Visual Basic 2005 Express Edition would be dearly appreciated. Thanks.
View 2 Replies
View Related
Dec 12, 2005
I am using installshield to distribute SQL Server 2005 Express. I have the SQLEXPR.EXE file and I want to run it in /qb mode so the user can see the pretty dialogs pop up but not have to click anything.
View 6 Replies
View Related
Oct 9, 2007
i need help for completely removing sql server 2005 from my computer,in order to reinstall it again.
please help me
View 3 Replies
View Related
Oct 9, 2007
I need help for completely removing sql server 2005 from my computer.
I have tried unintalling it through Add/Remove programs,but when i try to reinstall it this message appears :
"Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online."
I think that there is something that is not completely removed from the first installation.
View 15 Replies
View Related
Jan 19, 2007
Greetings,
I have attempted a full install of 2005 Ent on our W2k3 Enterprise
server. When attempting to install all services (SQL Svr database,
analysis, reporting, notification, integration, client
services/components) I get the message: "The features specified are
not valid for this edition of SQL Server". I got the same thing
when attempting to install with various subsets of services. Then I
tried just database services and client components and got the
message: " There was an unexpected failure during the setup
wizard. "
Perusing the core.log, I see:
Fatal Exception caught while installing package: "10"
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: sqlchainingsqlprereqpackagemutator.cpp
Compiler Timestamp: Tue Aug 9 01:14:20 2005
Function Name: sqls::SqlPreReqPackageMutator::modifyRequest
Source Line Number: 196
Has anyone encountered this? One of our guys downloaded the install
files from Microsoft. We don't use CDs anymore. I think there are
files missing.
Thanks for any assistance with this.
View 5 Replies
View Related
May 29, 2008
Hi All,
I have trouble with SQL Server 2005. I downloaded last night trial evolution. And I want to intall it but I cant progress after some points. And pop-up window appears with a msg that
TITLE: Microsoft SQL Server Setup
------------------------------
SQL Server Setup could not validate the service accounts. Either the service accounts have not been provided for all of the services being installed, or the specified username or password is incorrect. For each service, specify a valid username, password, and domain, or specify a built-in system account.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=SQLSetup90&EvtType=28075
And I opened the link above it says I must enter a strong password and I have done but I couldnt pass the step again.
Does anyone to help me for the problem ?
View 2 Replies
View Related
Feb 9, 2007
Hi All,
We have a Progress DB in our Company. We are trying to move all the data to SQL Server 2005. When I try to run the Import Data task from SQL Server 2005 the radio button called "Copy data from one or more tables or views" is getting disabled and it is asking me to write a SQL script to copy all data from 120 tables.
I am using a .NET Framework Data Provider for ODBC when I run the Import Data task from SQL Server 2005.
I am using the DataDirect 4.1 32-Bit Progress SQL92 v9.1D ODBC Driver to connect to Progress DB. I am getting a connection but the copy feature is getting disabled.
Can anyone please help me to resolve this issue, or even if you provide me with some pointers that will be really helpful.
Thanks
Suresh
View 1 Replies
View Related
Apr 13, 2004
Help,
the installation process stops almost immediately telling me I need a superduper secure password thingy but when I try the command prompts suggested they don't work... I'm on XP home.
View 11 Replies
View Related
Nov 28, 2005
I am trying to install SQL Server 2005 Express, but it fails.
View 6 Replies
View Related
Sep 11, 2007
Hi guys
I've been dealing with a few problems with SQL Server 2005.
We don't want to give our DBA's local administrator access to the servers so we had a problem with SSIS which I managed to resolve by adding their global group into the local DCOm group and modifying the security properties of MsDtsServer.
Another problem I've come across is when you log into Management Studio as an account that has local administrator access to the server you have the Green symbol next to the registered server, you can then right click and Stop, Restart services etc.
If I log into Management Studio with an account that has full SQL sysadmin rights but not local administrator rights to the server then the Green symbol doesn't appear and the Stop, restart options are all greyed out - all other functionality appears okay, they just seem to lose the ability to remotely stop and start services.
All of the above is with Windows Firewall turned off, if the user has local administrator rights but the SQL Server has the Windows Firewall switched on they are unable to remotely stop and restart services.
Port 1433 is open on the firewall and program execptions are there for sqlbrowse.exe
Anyone come across this particular problem before?
Any help would be appreciated.
Cheers
Hanley
View 2 Replies
View Related
Jun 8, 2007
Dear Helpers,
I can not setup SQL server 2005 express and the full trial version as well.
The setup progress stops at "setting file security", and nothing happens. I dont even get an error message.
This is very annoying. I have local administrator access, so it should work. Op system: Windows XP professional.
Machine: Hp Compaq dc7700p, 1 GB RAM, 80 GB HDD
Thanks for your help in advance.
View 5 Replies
View Related
Jun 29, 2007
I can't get the download to work...i've tried regular sql server express 2005, the express for sp2 and the express with advanced services. I keep getting this message after the native client and support files are installed.."This application has failed to start because XOLEHLP.dll was not found. Re-installing the application may fix this problem."Then right after that message is says... "Failed to load SQLSpars.dll"
View 1 Replies
View Related
Aug 30, 2007
Hi,
Can any 1 guide me how to completely remove SQL 2005 ?
Currrently i have a problem to install SQL 2005 where before this i already install SQL 2005 and uninstall it and delete some of the file inside the SQL folder, after that i reinstall the SQL 2005 and it get many error while installing.
Can some 1 guide me how to unintall it completely?
PS: im using Vista
View 2 Replies
View Related
Apr 18, 2006
hi all,
i have gone through the thread which had the same subject but still it didn't work out..
i have even removed SQL 2005 install bits using msicuu2.exe but still i can find SQL 2005 in my programs list in start menu....
Can anyone please let me know how i can remove SQL 2005 completely when it does not show up in Add/Remove programs and WindowsInstaller Cleanup Tool but i can still find it if i navigate to Start --> All programs --> Microsoft SQL Server 2005......
regards,
View 15 Replies
View Related
Oct 18, 2006
Hi Everyone, what im looking for is a way or a freeware utility that will genereate a single SQL Script, for my entire db...
Just like phpMyAdmin does for MySQL...
it would need to script my tables, the data of those tables, and all my stored proc's.
Can SQL Server management studio do this? or does anyone know of a utility that will.
Thanks, Justin
View 5 Replies
View Related
Aug 4, 2007
I have just migrated from XP Professional to Windows Vista Home Premium using Laplink€™s PCMover. PCMover gives no choice but moving everything to the new PC. I tried to uninstall everything related to SQL 2005, but whenever I try to install SQL 2005 Standard€™s database engine or analysis service, I get an error saying there is already an instance.
I tried the following command:
"%ProgramFiles%Microsoft SQL Server90Setup BootstrapARPWrapper.exe /Remove
I also tried:
start /wait msiexec /x {GUID} /l*v c:sql_uninstall.log
Is there anyway to completely uninstall everything of SQL 2005 in my situation?
Thanks in advance!
View 1 Replies
View Related
Feb 6, 2007
I am currently running Windows XP Professional Service Pack2. It already has MSDE & SQL Server 2000 installed (although I just uninstalled MSDE in the vain hope that it might present the installer with a more straightforward upgrade).
I have tried installing with the default instance & a new instance (I don't really care - I just need to install the darn thing). I just want the basic database & Books On-line, nothing fancy.
Here is the Summary log, for what it's worth:
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Tue Feb 06 16:45:14 2007
Machine : ANTHONYY1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BOL_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : SQLXML4
Error : Setup is preparing to continue with the installation.
--------------------------------------------------------------------------------
Here is the SQLSetup0011_ANTHONYY1_Core(Local).log
Microsoft SQL Server 2005 Setup beginning at Tue Feb 06 16:45:14 2007
Process ID : 2560
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/1/6 16:45:14
Complete: LoadResourcesAction at: 2007/1/6 16:45:14, returned true
Running: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14, returned true
Running: ValidateWinNTAction at: 2007/1/6 16:45:14
Complete: ValidateWinNTAction at: 2007/1/6 16:45:14, returned true
Running: ValidateMinOSAction at: 2007/1/6 16:45:14
Complete: ValidateMinOSAction at: 2007/1/6 16:45:14, returned true
Running: PerformSCCAction at: 2007/1/6 16:45:14
Complete: PerformSCCAction at: 2007/1/6 16:45:14, returned true
Running: ActivateLoggingAction at: 2007/1/6 16:45:14
Complete: ActivateLoggingAction at: 2007/1/6 16:45:14, returned true
Running: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14
Complete: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__2560" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2007/1/6 16:45:14
Complete: PerformDotNetCheck2 at: 2007/1/6 16:45:14, returned true
Running: InvokeSqlSetupDllAction at: 2007/1/6 16:45:14
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [ANTHONYY1]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
No Instance Name provided on the command line
If possible, determine action
Machine = ANTHONYY1, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = XMLDomDocument, Result = 0 (0x0)
Machine = ANTHONYY1, Article = Processor, Result = 0 (0x0)
Machine = ANTHONYY1, Article = PhysicalMemory, Result = 0 (0x0)
Machine = ANTHONYY1, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSVersion, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSServicePack, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSType, Result = 0 (0x0)
Machine = ANTHONYY1, Article = iisDep, Result = 0 (0x0)
Machine = ANTHONYY1, Article = AdminShare, Result = 0 (0x0)
Machine = ANTHONYY1, Article = PendingReboot, Result = 70011 (0x1117b)
Machine = ANTHONYY1, Article = PerfMon, Result = 0 (0x0)
Machine = ANTHONYY1, Article = IEVersion, Result = 0 (0x0)
Machine = ANTHONYY1, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = ANTHONYY1, Article = COMPlus, Result = 0 (0x0)
Machine = ANTHONYY1, Article = ASPNETVersionRegistration, Result = 0 (0x0)
Machine = ANTHONYY1, Article = MDAC25Version, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: ANTHONYY1
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
<Func Name='DisplaySCCWizard'>
CSetupBootstrapWizard returned 1
<EndFunc Name='DisplaySCCWizard' Return='0' GetLastError='183'>
Failed to find help file for LCID :2057
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2007/1/6 16:49:35, returned true
Running: SetPackageInstallStateAction at: 2007/1/6 16:49:35
Complete: SetPackageInstallStateAction at: 2007/1/6 16:49:36, returned true
Running: DeterminePackageTransformsAction at: 2007/1/6 16:49:36
Complete: DeterminePackageTransformsAction at: 2007/1/6 16:49:47, returned true
Running: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47
Complete: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47, returned true
Running: OpenPipeAction at: 2007/1/6 16:49:47
Complete: OpenPipeAction at: 2007/1/6 16:49:47, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2007/1/6 16:49:47
Complete: CreatePipeAction at: 2007/1/6 16:49:47, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2007/1/6 16:49:47
Complete: PopulateMutatorDbAction at: 2007/1/6 16:49:47, returned true
Running: GenerateRequestsAction at: 2007/1/6 16:49:47
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = 3
SQL_FullText = 3
SQL_SharedTools = 3
SQL_BC_DEP = 3
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = 3
Connectivity = 3
SQL_Tools90 = 3
SQL_WarehouseDevWorkbench = 3
SDK = 3
SQLXML = 3
Tools_Legacy = 3
TOOLS_BC_DEP = 3
SQL_Documentation = 3
SQL_BooksOnline = 3
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2007/1/6 16:49:48, returned true
Running: CreateProgressWindowAction at: 2007/1/6 16:49:48
Complete: CreateProgressWindowAction at: 2007/1/6 16:49:48, returned true
Running: ScheduleActionAction at: 2007/1/6 16:49:48
Complete: ScheduleActionAction at: 2007/1/6 16:49:48, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
No install request found for package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
No install request found for package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2007/1/6 16:49:48
Installing: sqlsupport on target: ANTHONYY1
Complete: InstallSqlAction.11 at: 2007/1/6 16:49:51, returned true
Running: InstallSqlAction.12 at: 2007/1/6 16:49:51
Installing: sqlncli on target: ANTHONYY1
Complete: InstallSqlAction.12 at: 2007/1/6 16:49:55, returned true
Running: InstallSqlAction.18 at: 2007/1/6 16:49:55
Installing: owc11 on target: ANTHONYY1
Complete: InstallSqlAction.18 at: 2007/1/6 16:49:56, returned true
Running: InstallSqlAction.21 at: 2007/1/6 16:49:56
Installing: sqlwriter on target: ANTHONYY1
Complete: InstallSqlAction.21 at: 2007/1/6 16:49:58, returned true
Running: InstallSqlAction.22 at: 2007/1/6 16:49:58
Installing: bcRedist on target: ANTHONYY1
Complete: InstallSqlAction.22 at: 2007/1/6 16:50:0, returned true
Running: InstallSqlAction.9 at: 2007/1/6 16:50:0
Installing: msxml6 on target: ANTHONYY1
Complete: InstallSqlAction.9 at: 2007/1/6 16:50:2, returned true
Running: InstallToolsAction.11 at: 2007/1/6 16:50:2
Installing: sqlsupport on target: ANTHONYY1
Complete: InstallToolsAction.11 at: 2007/1/6 16:50:5, returned true
Running: InstallToolsAction.12 at: 2007/1/6 16:50:5
Installing: sqlncli on target: ANTHONYY1
Complete: InstallToolsAction.12 at: 2007/1/6 16:50:8, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.18 at: 2007/1/6 16:50:8
Installing: owc11 on target: ANTHONYY1
Complete: InstallToolsAction.18 at: 2007/1/6 16:50:10, returned true
Running: InstallToolsAction.20 at: 2007/1/6 16:50:10
Installing: BOL on target: ANTHONYY1
Complete: InstallToolsAction.20 at: 2007/1/6 16:52:2, returned true
Running: InstallToolsAction.22 at: 2007/1/6 16:52:2
Installing: bcRedist on target: ANTHONYY1
Complete: InstallToolsAction.22 at: 2007/1/6 16:52:4, returned true
Running: InstallToolsAction.9 at: 2007/1/6 16:52:4
Installing: msxml6 on target: ANTHONYY1
Complete: InstallToolsAction.9 at: 2007/1/6 16:52:6, returned true
Skipped: InstallNSAction.10
Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result.
Running: InstallSqlAction at: 2007/1/6 16:52:7
Installing: sql on target: ANTHONYY1
Error: MsiOpenDatabase failed with 110
Failed to install package
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Error: MsiOpenDatabase failed with 110 for MSI D:ServersSetupSqlRun_SQL.msi
Setting package return code to: 1620
Complete: InstallSqlAction at: 2007/1/6 16:52:27, returned false
Error: Action "InstallSqlAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Running: InstallToolsAction.10 at: 2007/1/6 16:52:27
Installing: sqlxml4 on target: ANTHONYY1
Error Code: 0x8007006e (110)
Windows Error Text: The system cannot open the device or file specified.
Source File Name: sqlchainingminorbuildactionbehavior.cpp
Compiler Timestamp: Mon Jun 13 14:30:04 2005
Function Name: sqls::MinorBuildActionBehavior::modifyRequest
Source Line Number: 65
---- Context -----------------------------------------------
sqls::InstallPackageAction::perform
Complete: InstallToolsAction.10 at: 2007/1/6 16:55:59, returned false
Error: Action "InstallToolsAction.10" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Action "InstallToolsAction" will return false due to the following preconditions:
Condition "Action: InstallToolsAction.10 has finished and failed." returned true.
Installation of package: "tools" failed due to a precondition.
Step "InstallToolsAction" was not able to run.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run:
Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchMSDE2000" failed due to a precondition.
Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run:
Action: "UninstallForSQLAction" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchLibertySql" failed due to a precondition.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2007/1/6 16:55:59
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1620
Error Code: 0x80070654 (1620)
Windows Error Text: This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097
---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::postCommit
sqls::HighlyAvailablePackage::preInstall
led due to cancel code received from cancel source: 29539
...and here is the SQLSetup0011_ANTHONYY1_SQL.log:
=== Verbose logging started: 06/02/2007 16:52:14 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (00:54) [16:52:14:284]: Resetting cached policy values
MSI (c) (00:54) [16:52:14:284]: Machine policy value 'Debug' is 0
MSI (c) (00:54) [16:52:14:284]: ******* RunEngine:
******* Product: D:ServersSetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (c) (00:54) [16:52:14:284]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (00:54) [16:52:14:284]: Grabbed execution mutex.
MSI (c) (00:54) [16:52:14:299]: Cloaking enabled.
MSI (c) (00:54) [16:52:14:299]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (00:54) [16:52:14:299]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (A4:98) [16:52:14:299]: Grabbed execution mutex.
MSI (s) (A4:00) [16:52:14:299]: Resetting cached policy values
MSI (s) (A4:00) [16:52:14:299]: Machine policy value 'Debug' is 0
MSI (s) (A4:00) [16:52:14:299]: ******* RunEngine:
******* Product: D:ServersSetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (s) (A4:00) [16:52:21:080]: Note: 1: 2203 2: D:ServersSetupSqlRun_SQL.msi 3: -2147024873
MSI (s) (A4:00) [16:52:21:080]: MainEngineThread is returning 1620
MSI (c) (00:54) [16:52:21:080]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (00:54) [16:52:21:080]: MainEngineThread is returning 1620
=== Verbose logging stopped: 06/02/2007 16:52:21 ===
I suppose an error dialog (or log message) that actually told you what is wrong and then what to do is too much to ask for. (Or an installer than just copied all the files into place). :(
View 4 Replies
View Related
Aug 15, 2007
The error I got is:
Hotfix.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
EventType : sqlsesetup P1 : sysdbupg.sql P2 : 0x7361
P3 : odbcstatement__execute_batch@sysdbupg.sql@3 P4 : 0x7361
P5 : lib_odbc_statement.h@91 P6 : unknown P7 : sql9 P8 : hotfix@
P9 : x86 P10 : 3042
Log Location: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
MSP Error: 29537 SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]Cannot find the object 'dm_exec_query_resource_semaphores', because it does not exist or you do not have permission.. To continue, correct the problem, and then run SQL Server Setup again.
I tried to search internet, however, I couldn't get solution.
My SQL server 2005 is standard version, OS Windows server 2003 sp2, I am using Administrator account to install it.
Thanks a lot,
Rex
View 9 Replies
View Related
Feb 28, 2007
There appears to be no way to prevent SQL 2005 from installing roughly 1.5GB of stuff on the C: drive - even if you click that advanced button and select a different drive for all the components.
I can't find an easy way around this, other than rebuild the C: drive on a bunch of systems. Anyone have any other ideas?
-ec
View 9 Replies
View Related
Feb 15, 2007
I never installed previous beta versions on my computer before. But now I have some serious problem after an incomplete de-install and a re-install of SQL server 2005 express advanced. I hope anybody can help me to solve this. Because the first installation eas not succesfull I had to do an de-install. I have tried to unstall through start/control panel/ add-remove programms and even there not all programs were removed. And that caused the problem. After that I wanted to re-install again but an msi file was missing. So I did a de-install agian. Tried to re-install again but with a lot of errors. After looking at the library I found a program: Windows Install CleanUp. I installed it and that even gives an error for all programs installed with SQL 2005.
After that I ran a program called MsiInv to clean but without any succes because this program reported a run-tim error. I have all reports on my computer but don't know how to attach them. If you think you can help me I could send you all the reports.
Regards,
Jan J
View 2 Replies
View Related
May 26, 2006
I have never installed sql server before and I didnt know if I just take the sql server 2005 standard edition media and boot off it and do a fresh install that way or do I have to install Windows server
View 3 Replies
View Related
Feb 26, 2008
I'm attempting to use RDA to synchronize a pocket pc emulator with SQL Server 2005 database by following tutorial http://msdn2.microsoft.com/en-us/library/aa454892.aspx, which uses AdvWorksMobile database that comes with SQL Server 2005.
When get to testing of "To test application features " ( step 4 of the merge replication setup lab ), I am receiving SQLCe Exception errors.
ORIGINALLY, I was able to deploy an application and view the local database on the emulator, but once I clicked "InitSinc" button, I received an error.
"Failure to connect to SQL Server with provided connection information. SQL Server does not" exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect.
Found this error listed in Server Agent Errors log http://technet.microsoft.com/en-us/library/ms172357.aspx, but it wasn't very helpful since it doesn't provide any suggestions on fixing the problems.
I am brand new to SQL CE Server , mobile programming and .NET framework in general so please bare with me
All the connections / security settings, etc that were set up were taken from a tutorial so I am not sure what SQLCeServer is complaining about. Reading up on the error on the web didn't help, it all pointed to making sure that the snapshot folder had correct permissions set up. I verified that MACHINENAMEUISR_MACHINENAME guest user had Read rights to the database so I don't think that piece is the problem. Otherwise ,Merge publication has been setup in Microsoft SQL Server Management Studio by following the tutorial.
I am trying to run this sync on my home pc so there should be no issues with any user permissions
I have IIS installed
I did NOT have SQL Server Agent running in management studio at this time
I am trying to run this tutorial on an XP machine, which is my regular home PC so I dont think there are any special networking settings to consider
I am able to hit http://localhost/AdvWorksMobile/sqlcesa30.dll from my pc OK, but when I try to hit it from a cradled emulator ( after replacing "localhost" with "MACHINE_NAME" ), Internet Explorer on the emulator gives me a "Cannot Connect With Current Settings" error message. This part wasn't part of tutorial but decided so not sure if I am supposed to be able to hit it from my emulator..so I am not sure if the fact that I can't hit it is related to the problem.
AFTER STARTING SQL SERVER AGENTin Microsoft SQL Server Management Studio, I killed the application, and after relaunching it, it hits "The Specified table does not exist [Vendor]" error. This time it doesn't even launch first - that is I dont even get to pressing "InitSinc" button. Debugger is showing that this error is hit on the following line in AdvWorksMobile.AddWorksDataSetTableAdapters
int returnValue = this.Adapter.Fill(dataTable);
I am not sure why the errors changed on me after starting SQL Server Agent.
What can I do to fix this connection problem?
Thank you so much for your help!
Irina
View 3 Replies
View Related
Apr 8, 2007
I went to one of the Microsoft "Ready To Launch" events over a year ago. Microsoft was gracious and gave everyone who attended a free copy of Visual Studio 2005 and SQL Server 2005. I have installed the Visual Studio and use it all of the time. I also installed the SQL server 2005 but I can not find the application on my computer. After the install the only items that appear to have been installed are the following:
SQL Server Configuration tools(SQL Server Configuration manager,SQL Server Error and usage reporting, SQL Server surface area confiuration, Reporting Services configuration). There is also a menu icon labeled "Microsoft SQL server upgrade advisor" and SQL server upgraded wizard.
That is all. I can't find anything that is analogus to the Enterprise manager that was in SQL server 2000 or anything that is analogous to Query Analyzer of 2005.
Can someone help me out? We use SQL server 2005 so I know how it looks. I just can't see where it insalled. I don't think it did?
View 2 Replies
View Related
Jan 24, 2008
Are there any way I can make changes to my database without stopping the web site? I'm using SQL Server 2005 Express for my web shop. And each time I have to add or change a table or Stored Procedure I have to stop the site. What I do is to stop the web site (in IIS), restart the IIS and then open the database in the SQL Server 2005 Express Management tool. If I don't "release" the file first I get an error when I try to open the database file in the Management tool.But there must be a better way to do things? I also would like to take bacup of the database without stopping the site, but how? There must be others that have had the same problems? Regards, Sigurd
View 3 Replies
View Related
Feb 22, 2008
(1) I have already installed of SQL Server 2005 Developer Edition first.
(1) Can I install visual studio 2008 without the 2005 express edition of SQL server? Will be any problems because I don't have express edition of SQL server? Do I need to install the express edition of SQL server as well?
(3) How to use SQL Server 2005 Developer Edition instance on visual studio 2008?
View 3 Replies
View Related
Apr 20, 2007
Hello,
I've been trying to install SQL Server express edition all day and it errors out every time. I've tried it on two different servers and I get the same errors. Here's what the error log says:
2007-04-20 16:37:52.77 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.2 (Build 3790: Service Pack 2, v.2825)
2007-04-20 16:37:52.77 Server (c) 2005 Microsoft Corporation.
2007-04-20 16:37:52.77 Server All rights reserved.
2007-04-20 16:37:52.77 Server Server process ID is 1356.
2007-04-20 16:37:52.77 Server Authentication mode is MIXED.
2007-04-20 16:37:52.77 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-04-20 16:37:52.77 Server This instance of SQL Server last reported using a process ID of 1964 at 4/20/2007 4:37:47 PM (local) 4/20/2007 8:37:47 PM (UTC). This is an informational message only; no user action is required.
2007-04-20 16:37:52.77 Server Registry startup parameters:
2007-04-20 16:37:52.77 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-04-20 16:37:52.77 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-04-20 16:37:52.77 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-04-20 16:37:52.77 Server Command Line Startup Parameters:
2007-04-20 16:37:52.77 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf
2007-04-20 16:37:52.77 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf
2007-04-20 16:37:52.77 Server -m SqlSetup
2007-04-20 16:37:52.77 Server SqlSetup
2007-04-20 16:37:52.77 Server -Q
2007-04-20 16:37:52.77 Server -q SQL_Latin1_General_CP1_CI_AS
2007-04-20 16:37:52.77 Server -T 4022
2007-04-20 16:37:52.77 Server -T 3659
2007-04-20 16:37:52.77 Server -T 3610
2007-04-20 16:37:52.77 Server -T 4010
2007-04-20 16:37:52.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-04-20 16:37:52.79 Server Detected 1 CPUs. This is an informational message; no user action is required.
2007-04-20 16:37:52.88 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-04-20 16:37:52.92 Server Database Mirroring Transport is disabled in the endpoint configuration.
2007-04-20 16:37:52.93 spid5s Warning ******************
2007-04-20 16:37:52.93 spid5s SQL Server started in single-user mode. This an informational message only. No user action is required.
2007-04-20 16:37:52.93 spid5s Starting up database 'master'.
2007-04-20 16:37:52.93 spid5s Error: 17207, Severity: 16, State: 1.
2007-04-20 16:37:52.93 spid5s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf'. Diagnose and correct the operating system error, and retry the operation.
2007-04-20 16:37:52.97 spid5s Error: 17204, Severity: 16, State: 1.
2007-04-20 16:37:52.97 spid5s FCB:pen failed: Could not open file c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf for file number 1. OS error: 5(Access is denied.).
2007-04-20 16:37:52.98 spid5s Error: 5120, Severity: 16, State: 101.
2007-04-20 16:37:52.98 spid5s Unable to open the physical file "c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf". Operating system error 5: "5(Access is denied.)".
2007-04-20 16:37:53.05 spid5s Error: 17207, Severity: 16, State: 1.
2007-04-20 16:37:53.05 spid5s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2007-04-20 16:37:53.05 spid5s Error: 17204, Severity: 16, State: 1.
2007-04-20 16:37:53.05 spid5s FCB:pen failed: Could not open file c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf for file number 2. OS error: 5(Access is denied.).
2007-04-20 16:37:53.05 spid5s Error: 5120, Severity: 16, State: 101.
2007-04-20 16:37:53.05 spid5s Unable to open the physical file "c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf". Operating system error 5: "5(Access is denied.)".
View 2 Replies
View Related
Oct 16, 2006
Hello, I have installed Enterprise edition. I used Client Network Utility to create a server. I went into Enterprise manager and tried to register this server I created and I got the following error:
Specified SQL Server not found
What should I do?
View 20 Replies
View Related
Jun 29, 2007
I can't get the download to work...i've tried regular sql server express 2005, the express for sp2 and the express with advanced services. I keep getting this message after the native client and support files are installed.."This application has failed to start because XOLEHLP.dll was not found. Re-installing the application may fix this problem."Then right after that message is says... "Failed to load SQLSpars.dll"
View 1 Replies
View Related
Jun 5, 2006
I
am trying to install SQL 2005 in a 2-node virtual Windows 2003 cluster. I set
the cluster up through Virtual Server 2005 with 2 virtual nodes and one
virtual domain. The nodes can connect to each other as well as the
physical machine. When I try to install a fresh copy of SQL 2005 on my
cluster, I get an error every time. The
error stops the installation while checking system configuration after
installing prerequisites. The log file entry is as follows:
*******************************************
Setup Consistency Check Report for Machine: --SERVERNAME--
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: Warning
Description:
IIS is not installed, therefore Report Server feature will be disabled
Action: Install IIS in order for Report Server feature to be enabled
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
1
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run:
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache
Source File Name: datastoreclusterinfocollector.cpp
Compiler Timestamp: Fri Sep 16 13:20:12 2005
Function Name: ClusterInfoCollector::collectClusterVSInfo
Source Line Number: 883
----------------------------------------------------------
Failed to detect VS info due to datastore exception.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
----------------------------------------------------------
Failed to find a cluster group that owned shared disk: J:
WinException : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
View 3 Replies
View Related
