We have implemented a SQL Server 2005 Full Text Search solution with realtime updates to the catalog.
Is it a best practice to rebuild the entire catalog periodically?
I have been searching for best practices on this but without success. Any links to best practices for this sort of thing much appreciated.
Thank you
I need to rebuild master on an instance of SQL 2005. The instance was installed incorrectly and would like to rebuild the instance with the proper collation. I know the command to rebuild (below), but I'm not sure what to put in for the collation. The collation needs to be:
Dictionary order, case-insensitive, uppercase preference for use with the 1252 Character set
Here is the command: setup.exe /qn INSTANCENAME=QNXT REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=******* SQLCOLLATION=<NewSystemCollation>
What do i place in the <NewSystemCollation> in order to get the collation above installed?
Hello,
In SQL Server 2005 Express, how do I rebuild the master database?
I am receiving the following error messages.
The log scan number (888:136:1) passed to log scan in database 'master' is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error occurred during replication, re-create the publication. Otherwise, restore from backup if the problem results in a failure during startup.
AND
Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
I tried going through Add and Remove Programs. It did not recognize anything wrong. It did nothing.
I tried 'setup' from the install media. It said to go to 'Add and Remove Programs.'
In SQL Server 2005 Express, how do I rebuild the master database?
Thanks?
AIM
How to get the list of catalog views sys.* (sys.objects, sys.columns ....) in sql server 2005
select * from sys.objects where objectproperty(object_id, 'IsSystemTable') = 1
did not return the list as I've expected
thanks
COM Plus Catalog Requirement (Warning)
Messages
COM Plus Catalog Requirement
If SQL Server Setup fails, Setup will roll back the installation but may not remove all .manifest files. The workaround is to rename the files and then rerun Setup. For more information, see How to: Work Around COM+ Check Failure in SQL Server Setup.
Hello
I was using SQL SERVER 2000 ... In one table I've created FULL TEXT SEARCHING ( Full text catalog along with full text indexing)
Now we had to install our db in SQL SERVER 2005 standard edition. But while taking script it gave me two lines like:
if (select DATABASEPROPERTY(DB_NAME(), N'IsFullTextEnabled')) <> 1
exec sp_fulltext_database N'enable'
GO
if not exists (select * from dbo.sysfulltextcatalogs where name = N'DEV_CAS_DiagnosisCatalog')
exec sp_fulltext_catalog N'DEV_CAS_DiagnosisCatalog', N'create'
GO
so I used this in the new db creation script...
But I couldn't get where it actually is in SQL SERVER 2005 standard edition.
and also plz help how should we create if it doesn't exist...
What could be the problem....
Thanks In advance
I am trying to write some admin only procedures which will collect information to one of my development server from other production and development servers.
I have created linked servers to access these other servers on the development server. This development server is SQL Server 2000 EE. Other servers which I want to access are 2000 and 2005 (vaious editions)
E.g I have another development server called PRODTEST which is SQL Server 2005 and on the development server I have created a linked server pointing to PRODTEST called TESTLINKSRV. I want to access new object catalog view (as I do not want to use sysobjects)
When I run the following query
SELECT * FROM [TESTLINKSRV].[DBNAME].[sys].[objects]
I get following error,
OLE DB error trace [Non-interface error: OLE DB provider does not contain the table: ProviderName=' TESTLINKSRV ', TableName='" DBNAME "."sys"."objects"'].
Msg 7314, Level 16, State 1, Line 1
OLE DB provider ' TESTLINKSRV ' does not contain table '"DBNAME"."sys"."objects"'. The table either does not exist or the current user does not have permissions on that table.
So I try this query
SELECT * FROM [TESTLINKSRV].[DBNAME].[sys.objects]
and I get following error
Msg 208, Level 16, State 1, Line 1
Invalid object name TESTLINKSRV.DBNAME.sys.objects'.
So bottom line is how do I access catalog views on a 2005 server from a 2000 server using linked server?
I hope someone understands what I am trying to achieve. Please let me know what is it that I am doing wrong.
Thank you
I have a requirement to only rebuild the Clustered Indexes in the table ignoring the non clustered indexes as those are taken care of by the Clustered indexes.
In order to do that, I have taken the records based on the fragmentation %.
But unable to come up with a logic to only consider rebuilding the clustered indexes in the table.
create table #fragmentation
(
FragIndexId BigInt Identity(1,1),
--IDENTITY(int, 1, 1) AS FragIndexId,
DBNAME nvarchar(4000),
TableName nvarchar(4000),
[Code] ....
"SSIS 2012 Catalog doesn't have option to give read access to SSIS Catalog to view package run reports" ... Any luck allowing power developers / operators access to READ the SQL 2012 SSIS Execution Reports without granting them SSIS_Admin or Sysadmin?
According to this link posted back in 2011 (w/ Microsoft's feedback in Nov 2011: "We’re closing this issue as “Won’t Fix.” At this point the bug does not meet our bar for resolving prior to SQL Server 2012 RTM. As we approach the SQL Server 2012 release the bar for making code changes gets progressively higher." URL....Regarding Permissions to SSIS Catalog, here are the findings. We can give access in three ways:
1. READ Access – We can provide a user db_datareader access. With this the user can see the objects within the SSIS catalog database, but cannot see the reports.
2. SSIS_ADMIN – Add the user to this database role in SSISDB. With this the user can view the reports. But it also provides them privileges to modify catalog information which is not expected. We can add it using below script EXEC sp_addrolemember 'ssis_admin' , 'REDMONDPAIntelAnalyst'
3. SYSADMIN - Add the user to this server role. This will make the user an admin on the SQL server. This is not intended. Is there any method available which will have provision to give read only access to see SSIS Catalog package execution reports and not having modify Catalog access.
SQL Server 2005 version: 2153
I created a maintplan for system and user databases includes rebuild index, maint cleanup tasks.
Job is failing for user databases
It includes rebuild index task( online index enabled) and maintenance cleanup task, scheduled at every sunday 1 AM.
I receive following errors:
In eventvwr log
sql server scheduled job 'DBMP_RebuildIndex_User'
status: failed-Invoked on 2007-12-02 -1:00 Message: The job failed. The job was invoked by schedule 8 ('DBMP_RebuildIndex_User-Schedule).The last step to run was step1 ('DBMP_RebuildIndex_User')[/red]
In log report:
Failed:(-1073548784) Excuting the query "ALTER INDEX [XPKact_log] ON
[dbo].[act log] REBUILD WITH (PAD_INDEX=OFF,
STATISTICS_NORECOMPUTE=OFF,ALLOW_ROW_LOCKS=ON,ALLOW_PAGE_LOCKS=ON,SORT_IN_TEMPDB=OFF,ONLINE=ON)
"failed with the following error "Online index operation cannot be performed for index 'XPKact_log' because the index contains column 'action_desc' of data type text, ntext.image.varchar(max),varbinary(max) or xml. For non clusterd index the column could be an include column of the index. for clusterd index it could be any column of the table .Incase of drop_existing the cloumn could be part of new or old index. The operation must be performed offline". Possible failure reasons : Problems with the querey .'" Resultset" property not set correctly, parameters not set correctly, or connection not established correctly.
Please anyone help me on this?
I really appriciate
Thnks
I need to rebuild a corrupted/deleted master database in SQL Server 2005 SP2.
When I run setup.exe from the install media as directed by SQL Books Online, I get to the point where it says the instance is a later version and setup cannot continue. Rerunning the SP2 installer, the instances cannot be selected for upgrade (and it ignores the command line options for the original installer).
How to proceed?
Also, it would seem simpler to have a detach, copy and attach the system databases process, rather than run the installer. (I realize you can stop the instance, copy files, restart the instance; but that's not "high availability".)
W.
Hi, I'm testing my recovery on a sql server 2005 database. The server has been restored, which includes the OS and sql server 2005 installation (binaries, full tape restore). The tape restore didn't put back the master.mdf and other .mdf files (can't be backed up when open), so I need to rebuild the master and do a database recovery on it and the other supporting databases (yes, I have database backups). I have installed the sql 2005 setup CDs in a folder and run the following command to rebuild the master, but nothing happens, it pauses for a couple of minutes before it returns to the prompt, but it does not put and new master.mdf files in the folder and I can't start the service in single user mode. "start /wait setup.exe /qn INSTANCENAME=MSSQLSERVER REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=mypassword" Anybody have any procedures for a full sql server 2005 recovery or suggestions on this, please post.
Thanks, Mike
I have Googled the terms 'move path change full-text index catalog' and have come up with nothing that pertains to SQL 2005...only 2000 and 7.0....
So my question remains, how the heck do you change the location of the full-text catalog in SQL 2005? Must I delete and re-create? If so is there a good article on this process? I don't want to loose data or screw anything up....I can't imagine I am the first person who wants to do his?????
Hi,
Just wondering if anybody has any idea why when using RS 2005, remote catalog, asp.net 2.0 and using the .net 2.0 reportviewer control on an aspx page it seem to run 15 - 20 times slower than if we use a local catalog. The two machine in the remote catalog setup have a 2gb network connect between them, the doesn't apear to be any network load on either machine.
Any ideas will be greatfully received.
Cheers
Jon
I use this command to change collation on SQL 2005 cluster.
start /wait <CD or DVD Drive>setup.exe /qn VS=<VSName> INSTANCENAME=<InstanceName> REINSTALL=SQL_Engine SKUUPGRADE=1 REBUILDDATABASE=1 ADMINPASSWORD=<StrongPassword> SAPWD=<NewStrongPassword> SQLCOLLATION=<NewSystemCollation> SQLACCOUNT=<domainuser> SQLPASSWORD=<DomainUserPassword> AGTACCOUNT=<domainuser> AGTPASSWORD=<DomainUserPassword>
The rebuild master database failed with the following message. Please help.
Microsoft SQL Server 2005 Setup beginning at Tue Oct 23 07:32:48 2007
Process ID : 3112
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.3042.0
Running: LoadResourcesAction at: 2007/9/23 7:32:48
Complete: LoadResourcesAction at: 2007/9/23 7:32:48, returned true
Running: ParseBootstrapOptionsAction at: 2007/9/23 7:32:48
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3609.0
Complete: ParseBootstrapOptionsAction at: 2007/9/23 7:32:48, returned true
Running: ValidateWinNTAction at: 2007/9/23 7:32:48
Complete: ValidateWinNTAction at: 2007/9/23 7:32:48, returned true
Running: ValidateMinOSAction at: 2007/9/23 7:32:48
Complete: ValidateMinOSAction at: 2007/9/23 7:32:48, returned true
Running: PerformSCCAction at: 2007/9/23 7:32:48
Complete: PerformSCCAction at: 2007/9/23 7:32:48, returned true
Running: ActivateLoggingAction at: 2007/9/23 7:32:48
Complete: ActivateLoggingAction at: 2007/9/23 7:32:48, returned true
Running: DetectPatchedBootstrapAction at: 2007/9/23 7:32:48
Complete: DetectPatchedBootstrapAction at: 2007/9/23 7:32:48, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__3112" returned false.
Running: PerformSCCAction2 at: 2007/9/23 7:32:48
Complete: PerformSCCAction2 at: 2007/9/23 7:32:48, returned true
Running: PerformDotNetCheck at: 2007/9/23 7:32:48
Complete: PerformDotNetCheck at: 2007/9/23 7:32:48, returned true
Running: ComponentUpdateAction at: 2007/9/23 7:32:48
Complete: ComponentUpdateAction at: 2007/9/23 7:32:49, returned true
Running: DetectLocalBootstrapAction at: 2007/9/23 7:32:49
Complete: DetectLocalBootstrapAction at: 2007/9/23 7:32:49, returned true
Action "LaunchLocalBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchLocalBootstrap__3112" returned false.
Running: PerformDotNetCheck2 at: 2007/9/23 7:32:49
Complete: PerformDotNetCheck2 at: 2007/9/23 7:32:49, returned true
Running: InvokeSqlSetupDllAction at: 2007/9/23 7:32:49
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.3042.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [DSQL1N1]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
Instance Name = DC1
Trying to find install through Instance Name
Install Type = 1
If possible, determine action
*******************************************
Setup Consistency Check Report for Machine: DSQL1N1
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
Article: Edition Upgrade Check, Result: CheckPassed
<Func Name='PerformDetections'>
0
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.3042.0
<EndFunc Name='PerformDetections' Return='0' GetLastError='997'>
*******************************************
Setup Consistency Check Report for Machine: DSQL1N1
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
Article: Edition Upgrade Check, Result: CheckPassed
*******************************************
Setup Consistency Check Report for Machine: DSQL1N2
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Administrative Shares Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
Article: Edition Upgrade Check, Result: CheckPassed
The CheckSCCResult returned for cluster install is 0
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.3042.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2007/9/23 7:33:41, returned true
Running: SetPackageInstallStateAction at: 2007/9/23 7:33:41
Complete: SetPackageInstallStateAction at: 2007/9/23 7:33:43, returned true
Running: DeterminePackageTransformsAction at: 2007/9/23 7:33:43
Complete: DeterminePackageTransformsAction at: 2007/9/23 7:33:43, returned true
Running: ValidateSetupPropertiesAction at: 2007/9/23 7:33:43
Complete: ValidateSetupPropertiesAction at: 2007/9/23 7:33:43, returned true
Running: OpenPipeAction at: 2007/9/23 7:33:43
Complete: OpenPipeAction at: 2007/9/23 7:33:43, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2007/9/23 7:33:43
Complete: CreatePipeAction at: 2007/9/23 7:33:43, returned true
Running: RunRemoteSetupAction at: 2007/9/23 7:33:43
<Func Name='CProcessCtrl::GetInstallPath'>
<EndFunc Name='CProcessCtrl::GetInstallPath' Return='0' GetLastError='0'>
Error: 0x80070050 TaskScheduler::NewWorkItem for SQL Server Remote Setup
Error: 0x80070005 TaskSchedulerWorkItem failed to save the task [SQL Server Remote Setup ]
Complete: RunRemoteSetupAction at: 2007/9/23 7:33:43, returned false
Error: Action "RunRemoteSetupAction" failed during execution. Error information reported during run:
Attempting to determine log files for remote install.
Connection to remote computer's scheduler service.
Creating new workitem.
Deleting existing work item and trying again...
Starting remote setup onSQL1N2
Error: 80070005 Access is denied.
Running: PopulateMutatorDbAction at: 2007/9/23 7:33:43
Complete: PopulateMutatorDbAction at: 2007/9/23 7:33:43, returned true
Running: GenerateRequestsAction at: 2007/9/23 7:33:43
SQL_Engine = 3
SQL_Data_Files = -1
SQL_Replication = -1
SQL_FullText = -1
SQL_SharedTools = -1
SQL_BC_DEP = -1
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = -1
Connectivity = -1
SQL_Tools90 = -1
SQL_WarehouseDevWorkbench = -1
SDK = -1
SQLXML = -1
Tools_Legacy = -1
TOOLS_BC_DEP = -1
SQL_SSMSEE = -1
SQL_Documentation = -1
SQL_BooksOnline = -1
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2007/9/23 7:33:44, returned true
Running: CreateProgressWindowAction at: 2007/9/23 7:33:44
Complete: CreateProgressWindowAction at: 2007/9/23 7:33:44, returned false
Error: Action "CreateProgressWindowAction" failed during execution.
Running: ScheduleActionAction at: 2007/9/23 7:33:44
Complete: ScheduleActionAction at: 2007/9/23 7:33:45, returned true
Skipped: InstallASAction.11
Waiting for actions from remote setup(s)
Breaking wait state and aborting package due to cancel code received: 1602
Remote setup(s) are ready
Notify package action is determined: 1602
Error Code: 0x800700e9 (233)
Windows Error Text: No process is on the other end of the pipe.
Source File Name: remotemessageliboverlappedpipelistener.cpp
Compiler Timestamp: Sat Oct 7 09:43:54 2006
Function Name: sqls:verlappedPipeListener::writePipe
Source Line Number: 294
Notification failed to send.
---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::installAction
Removing machine from list of targets to sync.
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlsupport", referred by package: "as", will not be installed.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
All installs have been cancelled, so package: "owc11", referred by package: "as", will not be installed.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
All installs have been cancelled, so package: "bcRedist", referred by package: "as", will not be installed.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
All installs have been cancelled, so package: "msxml6", referred by package: "as", will not be installed.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
All installs have been cancelled, so package: "dts", will not be installed.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlsupport", referred by package: "dts", will not be installed.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlncli", referred by package: "dts", will not be installed.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
All installs have been cancelled, so package: "owc11", referred by package: "dts", will not be installed.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
All installs have been cancelled, so package: "bcRedist", referred by package: "dts", will not be installed.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
All installs have been cancelled, so package: "msxml6", referred by package: "dts", will not be installed.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
All installs have been cancelled, so package: "ns", will not be installed.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlsupport", referred by package: "ns", will not be installed.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlncli", referred by package: "ns", will not be installed.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
All installs have been cancelled, so package: "owc11", referred by package: "ns", will not be installed.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
All installs have been cancelled, so package: "bcRedist", referred by package: "ns", will not be installed.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
All installs have been cancelled, so package: "msxml6", referred by package: "ns", will not be installed.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlsupport", referred by package: "rs", will not be installed.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
All installs have been cancelled, so package: "owc11", referred by package: "rs", will not be installed.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
All installs have been cancelled, so package: "bcRedist", referred by package: "rs", will not be installed.
Skipped: InstallSqlAction
Clustered feature detected: SQL_Engine
Clustered feature detected: SQL_FullText
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.3042.0
Windows Error Text: User cancelled installation.
Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Nov 16 20:32:00 2006
Function Name: sqls::ReportChainingResults:erform
Source Line Number: 3667
---- Context -----------------------------------------------
sqls::RunRemoteSetupAction::waitForRemoteSetupComplete
king package: "patchRS2000" as failed due to cancel code received from cancel source: 1602
sqls
Delay load of action "UploadDrWatsonLogAction" returned nothing. No action will occur as a result.
Message pump returning: 1602
- COM Plus Catalog Requirement (Warning)
Messages
COM Plus Catalog Requirement
If SQL Server Setup fails, Setup will roll back the installation but may not remove all .manifest files. The workaround is to rename the files and then rerun Setup. For more information, see How to: Work Around COM+ Check Failure in SQL Server Setup.
Workaround says remove the .manifest files. Where are they?
SETUP CONTINUES TO FAIL
I am building an intranet application for my company .. similar to code generator
I am developing ASP.NET Application for this
1) How do I display list of SQL Server on the Network
2) Once I have list of SQL Server, I asked user to select once of the Server, provide credential for that server and obtain list of Database for that Server
3) Once I have list of Database, I need list of table under particular database
How do I do this in ASP.NET Application ?
I have a server that is being rebuilt soon and the data storage is going to be be restructured at the same time.
Currently all data, logs and backups are held in the default e:mssql7 directory (on a RAID 1+0 system).
After restructure data will be one one drive (RAID 5), backups logs and templdb will be on various others.
I have a couple of questions;
1. My plan is to detach all databases and backup the .ldf and .ndf files (logs are not as important after this point). Then backup master and msdb databases. Once the new server is built (specifying the new file locations at install), I will restore master and msdb and finally reattach the databases from their new locations. Does this sound reasonable?
2. At the point of server install, I intend to specifiy the default locations for data and log files. When I come to reattach the data files I want SQL Server to create a new log, but place it in the new default location. Will it do this automatically?
Thanks in advance for your help
Jonathan
Hi All.
Our inhouse app used to run on a SQL2000, but we've recently moved it to 2005.
The move was done by way of backup and restore (it was on a whole new server).
After the move, an odd problem showed up: once in a while, the server seems incapable of finding/using its indexes: everything starts working slowly, until I run a maintenance plan that rebuilds its indexes etc.
In the database/server all relevant options seem to be ok (auto update statictiscs etc.), and my conclusion that it doesn't use its indexes comes from the fact that:
* it gives the results from certain select statements in a totally different order (although the set of rows is the same),
* performance is (all of a sudden) very slow (seconds turning to minutes!!)
This happens:
* at least after a reboot of the server
* sometimes just in the middle of the day
The only way I've found to solve the matter, is by running the maintenance plan to rebuild the indexes, but sometimes this only seems to work the second time.
Does anybody share this experience, or know what to do about it?
Thanks,
Nick.
Hello there,
i have the following problem.
After creating a linked Server on a SQL-Server 2005 connected to a DB2 instance
i have the problem that my catalog is named in the object explorer: default.
Why is it so?
And how can i fix it.
While the catalog is named "default" i can't use the four parted names to use statements.
Maybe anyone can help me?
Thank you
everWantedLINUX
SQL 2005 SP2 in Managemrnt Studio...
I have a linked server set-up pointing to an instance that has several databases. In one catalog I have no tables or views being listed for the catalog. So I select a view, add the permissions that should allow the view to show in the list but it does not. And I did refresh and I did even restart management studio.
BTW: I can exec the view using a 4 part name.
Any one have an idea why the view don't show in the list?
Thanks much
chuck
how to get the catalog name for the SQL server without connection string
through the front end is that possible
I'm trying to create a linked server to generalize the query for pointing to different versions/instances of the same schema. For instance, we are testing against a test db named Name_Config, but we also need to execute the same tests against Name_ConfigQA. By building the linked server (named "LS_Test"), we are attempting to leave the sql as is in another catalog on the same server by pointing through LS_Test so the following sql won't need modifying, just the linked server properties:
select * from LS_Test...table1
This produces the following error:
OLE DB error trace [Non-interface error: OLE DB provider does not contain the table: ProviderName='LS_Test', TableName='table1'].
Msg 7314, Level 16, State 1, Line 1
OLE DB provider 'LS_Test' does not contain table 'table1'. The table either does not exist or the current user does not have permissions on that table.
I've been able to do this through synonyms in SQL Server 2005, but I'm having no luck setting the propertes in 2000 such that the linked server maintains the catalog name. Any help would be greatly appreciated.
Ed
We wanted to rebuild our main SQL server machine. How can we backup everything about the SQL server (such as all databases/objects and settings on security and users) and then recover them without any data loss?
A related question is how to recover the server machine in case of system failure or whole machine crash down?
Thanks!
I had to reinstall my local copy of SQL a few weeks ago, which naturally overwrote the
msdb.dbo.sysmanagement_shared_server_groups_internal and
msdb.dbo.sysmanagement_shared_registered_servers_internal tables.
However I still have the local XML file that SSMS reads so I can still access the groups, I just get weird errors when trying to re-register my install as the new CMS. How to rebuilt those tables from the XML file or know of a way to repopulate?
Do I need to rebuild my indexes on my High Availability listeners?
When I do a full index rebuild on my primary DB's. Does rebuilding also send the rebuild to the listener(s)?
i have add maintenance plan rebuild index in sql server 2014 log file increased very tremendous space.
View 6 Replies View RelatedCan any one help - my Full text catalog on a remote shared sql server hasdied and i need to recreate it completely - I have done this before but i'velost the code to do it.If I remember right what i did was use start --> run --> to run an exe in themssql folder that connected to the remote server - but i've lost all theparameters I needed for it.ANy help much apprectiated
View 1 Replies View RelatedBooks On Line makes breaking out the report server databases on to a separate machine from the report server itself sound very easy. I have tried it and it is but I can't get the report server to connect to the databases once they are on the other machine.
Everything was done by the book(s). We use SSRS only for intranet use so all inside firewall. The SQL Server 2005 services on both machines (including the RS Windows service) all run as the same domain administrator account, this account was used to log in to RS Config Tool and it was told to use this account under Windows Authentication to connect to the database server. The two machines are in the same domain, even on the same switch. The only difference is the one with report server on is Windows 2000 Server SP4 and the one to which the rs databases are moving is Windows Server 2003 SP1. The account mentioned above has sysadmin rights on both SQL Servers, as well as having all the RSExecRole rights as specified in BOL. And it has rights to logon as a service in group policy on both machines. Its password hasn't been changed.
The RS Config Tool completed fine and reported no errors.
But when you try to connect to the report server you get the error:
"The report server cannot open a connection to the report server database. The logon failed. (rsReportServerDatabaseLogonFailed)" The log shows that a privilege required by the client is missing but doesn't specify what! I thought this was all taken care of when the RS Config Tool told it which account to connect with.
This is driving me daft. It should be so easy!! Does anyone have any idea what might be wrong? Nothing says I need to do anything with the encryption key when I am keeping the report server itself exactly as it was and just moving the catalog - or have I missed something here?
Grateful for any ideas.
IP Logged
Hello!
Since 2 weeks now I'm trying to figure out how to get SQL CE 3.5 into the CE 6.0 R2 image (I'm building my own image with platform builder 6.0, latest patches - until march 2008 - installed).
There is no Catalog item in my "Catalog item view" not even an older version of SQL!
In Platform builder 5.0 there were Items in the Catalog and - as expected - by selecting them I got the server into the image.
I also tried to add "SYSGEN_SQLMOBILE = 1" to the project environment variables, which resulted in having build errors instead of getting a working image.
There are also some postings around in the internet telling how to add the required dll's manually.
(Hey, Microsoft, do we live in stone age or in the 21st century?)
Btw. installing the cab files is possible for me, but of course not for our customers.
Are there any sugesstions how to get a catalog item?
best regards,
Martin.
We face slow performance issue for like taking long time for same query execution after We apply index rebuild and reorganize index. But, after execution of query or procedure for 2 -3 times, performance will be faster. I have following questions
1 do we need to update stats after we rebuild an reorganize index.
2. is it will be slow for 1-2 times for every query and stored procedure execution after we rebuild and reorganize index?
I'm trying to determine how much space I would need for my data drive and log file drive to do index rebuild. I have a database which is 100gb, it is in simple recovery mode. let me know what to have a look at to determine how much space.
View 7 Replies View RelatedIf I rebuild some indexes that are above 30% of average fragmentation, should I after that update statistics?
Also, How can I see if I Need to update statistics^on the tables of my database?