SQL Server 2005 Instance Rebuild
Sep 12, 2007
I need to rebuild master on an instance of SQL 2005. The instance was installed incorrectly and would like to rebuild the instance with the proper collation. I know the command to rebuild (below), but I'm not sure what to put in for the collation. The collation needs to be:
Dictionary order, case-insensitive, uppercase preference for use with the 1252 Character set
Here is the command: setup.exe /qn INSTANCENAME=QNXT REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=******* SQLCOLLATION=<NewSystemCollation>
What do i place in the <NewSystemCollation> in order to get the collation above installed?
View 3 Replies
ADVERTISEMENT
Nov 15, 2007
The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
Am I mssing something here? Any help much appreciated
Thanks...
View 2 Replies
View Related
Jul 24, 2007
We have implemented a SQL Server 2005 Full Text Search solution with realtime updates to the catalog.
Is it a best practice to rebuild the entire catalog periodically?
I have been searching for best practices on this but without success. Any links to best practices for this sort of thing much appreciated.
Thank you
View 3 Replies
View Related
Apr 13, 2007
Hello,
In SQL Server 2005 Express, how do I rebuild the master database?
I am receiving the following error messages.
The log scan number (888:136:1) passed to log scan in database 'master' is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error occurred during replication, re-create the publication. Otherwise, restore from backup if the problem results in a failure during startup.
AND
Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
I tried going through Add and Remove Programs. It did not recognize anything wrong. It did nothing.
I tried 'setup' from the install media. It said to go to 'Add and Remove Programs.'
In SQL Server 2005 Express, how do I rebuild the master database?
Thanks?
AIM
View 8 Replies
View Related
Jun 25, 2015
I have a requirement to only rebuild the Clustered Indexes in the table ignoring the non clustered indexes as those are taken care of by the Clustered indexes.
In order to do that, I have taken the records based on the fragmentation %.
But unable to come up with a logic to only consider rebuilding the clustered indexes in the table.
create table #fragmentation
(
FragIndexId BigInt Identity(1,1),
--IDENTITY(int, 1, 1) AS FragIndexId,
DBNAME nvarchar(4000),
TableName nvarchar(4000),
[Code] ....
View 5 Replies
View Related
Sep 19, 2006
Hi,
I am trying to install a new SQL Server 2005 instance. When running the
setup I get a warning related to "Edition Change Check" that advises
me to run setup with SKUUPGRADE=1. I already have SQL 2005 with SP 1 installed.
For the new instance that I am trying to install I use the SQL Server 2005
media without sp1. What do I do? Ignore the warning and at the end reapply SP1?
Thanks
View 2 Replies
View Related
Dec 4, 2007
SQL Server 2005 version: 2153
I created a maintplan for system and user databases includes rebuild index, maint cleanup tasks.
Job is failing for user databases
It includes rebuild index task( online index enabled) and maintenance cleanup task, scheduled at every sunday 1 AM.
I receive following errors:
In eventvwr log
sql server scheduled job 'DBMP_RebuildIndex_User'
status: failed-Invoked on 2007-12-02 -1:00 Message: The job failed. The job was invoked by schedule 8 ('DBMP_RebuildIndex_User-Schedule).The last step to run was step1 ('DBMP_RebuildIndex_User')[/red]
In log report:
Failed:(-1073548784) Excuting the query "ALTER INDEX [XPKact_log] ON
[dbo].[act log] REBUILD WITH (PAD_INDEX=OFF,
STATISTICS_NORECOMPUTE=OFF,ALLOW_ROW_LOCKS=ON,ALLOW_PAGE_LOCKS=ON,SORT_IN_TEMPDB=OFF,ONLINE=ON)
"failed with the following error "Online index operation cannot be performed for index 'XPKact_log' because the index contains column 'action_desc' of data type text, ntext.image.varchar(max),varbinary(max) or xml. For non clusterd index the column could be an include column of the index. for clusterd index it could be any column of the table .Incase of drop_existing the cloumn could be part of new or old index. The operation must be performed offline". Possible failure reasons : Problems with the querey .'" Resultset" property not set correctly, parameters not set correctly, or connection not established correctly.
Please anyone help me on this?
I really appriciate
Thnks
View 1 Replies
View Related
Oct 9, 2007
I need to rebuild a corrupted/deleted master database in SQL Server 2005 SP2.
When I run setup.exe from the install media as directed by SQL Books Online, I get to the point where it says the instance is a later version and setup cannot continue. Rerunning the SP2 installer, the instances cannot be selected for upgrade (and it ignores the command line options for the original installer).
How to proceed?
Also, it would seem simpler to have a detach, copy and attach the system databases process, rather than run the installer. (I realize you can stop the instance, copy files, restart the instance; but that's not "high availability".)
W.
View 11 Replies
View Related
Nov 16, 2006
Hi All,
I have two drive, C and D. When first time I installed SQL Server 2005, I think that I point to C drive which is having only 10 GB, instead of drive D which has bigger space. Now, I have a problem of restoring my database due to lack of space on my C drive. Can anyone guide me to change the instance of database from drive C to drive D.
TIA
View 3 Replies
View Related
Nov 27, 2007
I have access to a server with sql server 2005 workgroup edition. It runs an instance of sql server for this huge application we use. I would like to create a new instance of Sql server 2005 so I can play around with it and learn how to use the 2005 version. How can you create a new instance? I want this instance to run alongside the current instance. I can't find out how to do this anywhere. I'm sure it's possible though. Thanks
View 3 Replies
View Related
Mar 21, 2008
Hi
I just need some information on creating the second instance in sql server 2005. In my production server we have the databases with different collation. we need to separate those two different collation databases by creating the new instance. I have to create the instance by this afternoon. I think we need to install the sql server 2005 again and select the option of named instace. As long as this is production server are databases are going to be available for the users while installing the sql server to create the different instance? Could some one please respond on this. Thanks!
View 11 Replies
View Related
Mar 9, 2008
OS: Windows 2003 Server Enterprise Edition
SQL Server: SQL Server 2005 Enterprise Edition (2 instances)
SQL Server : SQL Server 2000 Enterprise Edition ( 1 instance)
Problem:
2nd instance of sql server 2005 installed and service pack 2 applied
when using SS Mangement Studio I get the error:
Cannot connect to <ServerName>MSSQL2K5_2.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
------------------------------
Error Number: 10060
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Open MyComputer
Services & Applicaitons | Services
SQL SERVER (<SERVER NAME> MSSQL2K5) STARTED
SQL SERVER (<SERVER NAME> MSSQL2K5_2) STARTED
SQL AGENT (<SERVER NAME> MSSQL2K5) STARTED
SQL AGENT (<SERVER NAME> MSSQL2K5_2) NOT STARTED
Application Event Log
SQLServerAgent could not be started (reason: Unable to connect to server 'BLUESTONEMSSQL2K5_2'; SQLServerAgent cannot start).
SOURCE: MSSQL%MSSQL2K5_2
Server is listening on [ 'any' <ipv4> 2777].
DAC is listening on [ 'any' <ipv4> 2778]
<SQL ERROR LOG> AND <APPLICATION EVENT LOG ENTRY>
The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service.
Error: 0x54b, state: 3.
Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos.
This is an informational message.
Further action is only required if Kerberos authentication is required by authentication policies.
CONFIGUATION MANGER
Alias is configured with correct port. (2777)
Protocol TCP/IP
View 2 Replies
View Related
Apr 29, 2007
I'm new to SQL Server, and have just started to work through the MS Press ADO.Net 2.0 Step-by-Step book.
In the beginning of the book, at the point where the Add Connection box comes up, it says to type in the Server Name text box, (local)SQLEXPRESS, as the book takes for granted you have SQL Express installed, and hence this is the instance name.
I have Visual Studio 2005 Professional, and SQL Server 2005 Standard installed. What would the instance of SQL Server be in this case?
Any hope would be greatly appreciated.
View 33 Replies
View Related
Oct 8, 2006
I can't get an instance of SQL Server 2005 to start using TCP/IP.
The issue is pretty basic: I have a local SQL Server 2005 that I can get to run and connect to it using Named Pipes.
The problem is that from a remote machine, although I can connect to it using Named Pipes, ASP.NET can't connect to it (when I'm in design mode, I can connect to the SQL server to configure Data Sources, but at run-time, it refuses to work).
So, I tried to switch to TCP/IP. I can't get it to work on the local machine. I get the following errors:
SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
TDSSNIClient initialization failed with error 0xd, status code 0x1.
I've looked up these errors, and most of them are basic "make sure protocols are enabled, make sure VIA is disabled, etc." but those aren't it.
Any ideas?
TIA
jdn
View 7 Replies
View Related
Dec 14, 2006
Hi,
I have installed SQL Server 2005 Express Edition on my system. The default instance name is set as SQLEXPRESS. I want to change this to something else. Is there anyway I can do that?
Thanks,
pravi
View 11 Replies
View Related
Jan 17, 2008
I have installed SQL Server 2005 on two boxes and installed client tools only on my local machine.
I cannot connect to either machine.
I also have the "Error 26 problem - does not allow remote connection etc."
Of my two remote servers, one is virtual the other is not.
I cannot establish a connection through the "Microsoft SQL Server Management Studio" tool on my local machine using:
Severname: ServerNameInstanceName
Authentication: Either Windows or SQL Server
Eveything is enabled (TCPIP, Name Pipes), no firewall
SqlBrowser is running
I have SQL Server 2000 also installed on the same server machines and I am able to connect to this.
I tried using IP addresses and port numbers as follows (NB ServerName implies alias or ip address) and portnumbers I have tried are 1433 and 1766:
ServerName,portnumber
ServerNameInstanceName,portnumber
It either connects to the 2000 or gets the error 26 problem.
Any help would be appreciated.
View 5 Replies
View Related
May 14, 2008
help
(i have one sql server installed in my server)
how can i add another databese server on the same server
like for example the server name is server-1
need to create
sever-1/sql_data1 ----------------- instance of SQL Server 2005
sever-1/sql_data2 -----------------new instance of SQL Server 2005
so i open my SQL Server Management Studio i see 2 servers !
and how many databese servers i can install in the same server 1,2,3,4......... what is the limit
is thre is examples with screenes picture of the install step by step for add
TNX
View 1 Replies
View Related
Aug 23, 2007
Hi, I'm testing my recovery on a sql server 2005 database. The server has been restored, which includes the OS and sql server 2005 installation (binaries, full tape restore). The tape restore didn't put back the master.mdf and other .mdf files (can't be backed up when open), so I need to rebuild the master and do a database recovery on it and the other supporting databases (yes, I have database backups). I have installed the sql 2005 setup CDs in a folder and run the following command to rebuild the master, but nothing happens, it pauses for a couple of minutes before it returns to the prompt, but it does not put and new master.mdf files in the folder and I can't start the service in single user mode. "start /wait setup.exe /qn INSTANCENAME=MSSQLSERVER REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=mypassword" Anybody have any procedures for a full sql server 2005 recovery or suggestions on this, please post.
Thanks, Mike
View 6 Replies
View Related
Jan 8, 2008
Hi,
I have an interesting situation here. I have a SQL Server 2000 database which is attached to SQL Server 2005. The database (SQL 2000) however only has service pack 3 applied. I need to apply SP4 before I can move forward with SQL 2000->2005 upgrade. The question: can I somehow apply this support package with my current configuration or should I install full SQL 2000 front-end anew (which I don't have at the moment)? Whenever I try to run SQL 2000 SP4 it complains "SQL Server 2000 is not installed on this machine."
The server I try to install the update is Windows Server 2003 R2 Standard Edition x64. SQL Server 2000 database itself is x86 (obviously).
Thanks.
View 4 Replies
View Related
Aug 8, 2007
Hello,
I just installed SQL Server 2005 Enterprise edition from my company's DVD. It was installed with the setting of using both Integrated windows authenitication as well as basic named authenication. I installed all the options too: Database Engine, Analysis Services, Reporting Services, SQL Server compact edition, and Integration Services. When I look at services there are: SQL Server Integration Services, SQL Server Analysis Services, SQL Server Reporting Services, and SQL Server Browser. All of which are running. Something that took me offguard was the installation did not ask me to provide an SA password. Other than that, the install looked like it went good.
I was able to connect to the local instance of the SQL Server 2005 using the SQL Server Management Studio. I could connect with SA, or connect with Integrated Windows Authenication. Whoohoo. Off and running! As a matter of fact, for the SA account I could use any password and it would still log me in.
First thing I did was I went in to the copy wizard to attempt to copy a database from a server on our network to my local box. First it asked me for the remote server. Then when I specified my local instance in the wizard, the wizard complained that my local instance was NOT SQL Server 2005. Doh! This I didn't understand. I figured maybe I need to check for MS updates. Sure enough, I found that ther was a SP2 and then a hot-fix for that SP2. I applied both. Now I cannot connect from SQL Server Management studio to my local instance of SQL Server 2005 database server. I get the following error:
"An error occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)"
However, I went in to see what other services I could connect to, and here's the results:
Analysis Services : OK!
Reporting Services (Windows Auth/Basic/Forms) : NG "The reporting Services Instance could not be found (Microsoft.SqlServer.Management.UI.RSClient)"
SQL Server Compact Edition : NG "The database cannot be found. Check the path to the database. [ File Name = CCG092 ] (SQL Server Compact Edition ADO.NET Data Provider)
Integration Services : OK!
I can connect to other SQL Server databases on our network. However, just not my local one. No one on the network can connect to me either.
I even turned off my windows firewall and still no luck connecting to my own.
So something really went wrong when I applied SP2, however, admittedly from the error message when I tried to use the copy wizard, something was probably already wrong.
Any ideas?
Thanks!
View 4 Replies
View Related
Feb 5, 2008
In my machine , we were used befour sql server2000 and now we are using sql server 2005 ,
So, I have both 2000 and 2005 installed on my machine ,
on my machine i am working on Custome Paging and one function ROW_NUMBER() is not working ,because of i think i am still working on 2000 instance on locally,
Can any one know how can we create an instance of sqlserver 2005 database and work with that?
I want to work with sql server 2005.
View 1 Replies
View Related
Jul 25, 2005
I'm new to SQL Server and just installed VS 2005 and SQL Server 2005 Express. My question is, is there any naming rules for an instance? When I open Express Manager it is asking me to enter an Instance name. Thanks for any suggestions or help,
View 2 Replies
View Related
Aug 16, 2007
Hi:
I have a SQL 2005 instance (standard edition with sp2 on windows 2003 server) located on different domain.
I can connect to it by using sa only. I need to use SQL login.
I created another user called 'test' and granted with sysadmin server role, but I got following error:
Login failed for user 'test'. (Microsoft SQL Server, Error: 18456)
I searched on the internet two days with no luck.
Any idea?
Thanks in advance.
Theresa
View 7 Replies
View Related
Mar 16, 2006
We successfully installed the first INstance of SQL Server 2005 with success. NOw we are trying to install a second instance and seems to get hung up when configuring the Database Services.
Anyone run into this issue? Should we stop all services from running on the server?
View 4 Replies
View Related
Jul 25, 2007
Is it possible to install a 2000 instance on a 2005 server? Just install a named instance and install 2000 in a different directory?
View 5 Replies
View Related
May 18, 2007
This has me totally baffled. I have a default instance of SQL Server 2005 on a server and I installed a second instance on the same server. It worked fine until I rebooted the server. Now I cannot connect to the second instance. The error message mentions remote connections but I'm not trying to connect to the instance remotely. The entire error message is below. Has anyone come across this?
===================================
Cannot connect to SERVERINSTANCENAME.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
Error Number: 10061
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
View 4 Replies
View Related
Nov 7, 2007
I have question about install both default instance and name instance on to one server. Do I need follow a specific order such as default instance first then name instance?
If my server already has two or more name instances, can I install one more default instance?
Thanks
View 1 Replies
View Related
Aug 17, 2006
Hi
We would like to install Sql 2005 Enterprise Edition (including database engine, reporting service, integration service and analysis service) as a sepearte instance on a server which already has Sql 2000 with reporting, analysis services. We do not want to disturb the existing sql 2000 setup.
I heard that reporting services are instance unaware application. Please let us know If I can install the sql 2005 on 2000 server.
Sankar N
View 5 Replies
View Related
Nov 7, 2007
I want to integrate SQL Server 2005 setup into my Testproject Configurator setup. SQL Server 2005 install files should not be included in TestProject setup. If SQL Server 2005 is not installed on the target computer and install files are available then TestProject setup will install SQL Server 2005 with myProjectInstance instance name.
how the setup can install the custom instance name.?
Di i need to use install sheid for this ?
View 3 Replies
View Related
Nov 21, 2006
Hi,
Do the restrictions for SQL 2005 express apply to each instance or per server? For example, if there are two instances installed on a dual CPU machine, can each instance be configured to use 1 CPU and 1 GB of RAM?
Thank you.
View 1 Replies
View Related
Jan 22, 2008
Good day!
I installed SQL 2005 Standard Edition in my XP machine, but I don't have any instances. When I use Add/Remove programs, and click Change in Microsoft SQL Server 2005, it says that "No instances have been installed. To add a new instance, click the Add component hyperlink", but I cannot see the hyperlink. Why was the default instance never installed? How do I install a new instance?
Thanks.
View 4 Replies
View Related
Apr 14, 2008
I have SQL server 2005 on a Windows 2003 machine. The machine is old and I need to move the entire SQL server to a new machine. There are many databases and users that need to move across to the new server. Detaching and attaching the databases would be tedious due to the large number of databases. Is there a way of moving the DB's and SQL users to the new machine without having to do each db one at a time?
Additional info that might be helpful:
The new server's IP address and name must also change to that of the old server.
The old server initially had SQL 2000 on it and was upgraded to SQL 2005.
The new server was installed with SQL 2005 only. Hence the Database and log paths differ between the old and new server.
Any help would be appreciated.
View 5 Replies
View Related
Sep 27, 2006
We've devoted a resource to this today, but I have to believe it's something easy that we're overlooking. The scneario is that we have a production Web application that until last weekend had a SQL 2000 back end. This weekend we installed a new instance of SQL 2005 and everything works (we tested in a sandbox environment, but someone must not have load tested enough) and never saw these exceptions. So, after the upgrade we now receive 100's of thexe SQL excptions per day:A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)Does anyone know what we've overlooked that's causing this issue?Thanks for any help!
View 2 Replies
View Related
