MS SQL Server :: SQL Server 2005 SP1 Upgrade Results In Build 2040

SQL Server 2005 Build 9.00.3200 CU4

Apr 2, 2008

I would like to install this on my server which is a cluster. The server has 2 instances on it. I only want to install it on the dev instance. I got the executable from Microsoft. There is a hotfix.txt file but that doesn't have any installation information. Could someone please help me to find some documentation so that this will only update our dev instance. If there is documentation, could someone please send it to me?

Thanks.

View 6 Replies View Related

Which Edition And Build Of SQL Server 2005 To Use For Biztalk 2006?

Oct 12, 2007

Hi all -

We are planning to use a 2-node SQL Server 2005 cluster as part of a new Biztalk 2006 project, and I would like some advice regarding SQL Server service packs and editions.

Testing has already been running for some time without problems, but the test environment (a) is not clustered, (b) is using SQL Server 2005 Standard Edition rather than Enterprise and (c) has neither of the SQL Server service packs installed.

As this is a major project for us, my instinct would be to use Enterprise Edition (maximise performance and scalability)
and to apply SP2 (because I thought it was best practice to be up-to-date). I would have liked to do this before we go Live so we don't run the risk of having to change afterwards if we hit a problem.

Understandably, the project guys' perspective is this: testing so far has not been affected by SQL Server bugs, and we should go Live with the environment we have tested in, albeit with the planned 2-node cluster which is seen as a 'must have'.

I have trawled Books Online, Technet and other resources without success, so any thoughts or info on required, recommended or preferred combinations of Biztalk 2006 with SQL Server 2005 editions and service packs in a clustered
environment would be greatly appreciated - thanks!

Michael

View 5 Replies View Related

Problems With Merge Rep After Upgrading From Sql Server 2000 Sp3a To Sql Server 2005 Build 2153

Mar 6, 2007

Hi,

We just upgraded 2 sql servers from sql server 2000 sp3a to sql server 2005 build 2153, and merge rep exists between these 2 servers.

However, after sql server upgrade, we had to reinitialize merge replication and now the merge agent is reporting 2 errors

1)

Error messages:

The Merge Agent failed to upgrade triggers, metadata and stored procedures on the Subscriber to versions compatible with SQL Server 2005. Restart synchronization, and if this failure continues to occur reinitialize the subscription. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199403)
Get help: http://help/MSSQL_REPL-2147199403

Invalid column name 'metadata_select_proc'. (Source: MSSQLServer, Error number: 207)
Get help: http://help/207

Invalid column name 'delete_proc'. (Source: MSSQLServer, Error number: 207)
Get help: http://help/207

2)

Command attempted:

{call sp_MSensure_single_instance (N'Merge Agent Name', 4)}

Error messages:

The merge process could not connect to the Publisher 'Server:database'. Check to ensure that the server is running. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199368)
Get help: http://help/MSSQL_REPL-2147199368

Another merge agent for the subscription(s) is running or the server is working on a previous request by the same agent. (Source: MSSQLServer, Error number: 21036)
Get help: http://help/21036

looking inside the sp_MSensure_single_instance stored procedure, it's trying to obtain an exclusive lock on resource 'Merge Agent Name' but fails and returns -1

this is the stored procedure executed by sp_MSensure_single_instance and @retcode = -1 and thus cannot obtain exclusive lock on resource

EXEC @retcode = sys.sp_getapplock @Resource = 'Merge Agent Name',

@LockMode = 'Exclusive',

@LockOwner = 'Session',

@LockTimeout = 0,

@DbPrincipal = 'MSmerge_PAL_role'

so i think it's failing because for some reason MSmerge_PAL_role database role does not have enough rights to obtain exclusive lock on necessary resources

i've tried many things to fix this, including scripting out and dropping all merge rep, turning off replication db option and reapplying replication create scripts on the server, and even manually deleting the MSmerge_PAL_role database role but still doesn't work

can anyone help?

Thanks

View 9 Replies View Related

Installing CU4, Build 3200, On SQL Server 2005 Which Is Running On A Cluster

Apr 3, 2008

I have no idea how to apply "fixes" or updates to SQL Server when it is running on a cluster.

We are currently running SQL Server 2005 with SP2. The version would be Microsoft SQL Server 2005 - 9.00.3042.00 (X64) Feb 10 2007 00:59:02 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)

I am hoping that someone can tell me of a document that exists, that includes the very basics, on how to do this. I need something that says go to the cluster and do these steps in this order, etc. from start to finish.

Thank you.

View 3 Replies View Related

How To Build A Own Silent Setup Of MS-SQL-Server 2005 Express For Installation On Customers PC ...

Feb 21, 2008

Hi,

I want to build a silent setup/installation of MS-SQL-Server-Express 2005 for installation on customers computers.
I want to integrate it in my own setup/installation routine of my application.
How can I do that?
Where can I get Infos or tutorials? Perhaps here ?

Sorry for my bad english

Regards Tron

View 7 Replies View Related

Upgrade From SQL Server 2005 Eval Copy To SQL Server 2005 Standard Edition

Jul 23, 2007

I have a SQL Server 2005 evaluation that has already been installed and setup on a server. I believe it originally had a 180 day eval. There have been numerous databases and users added as well as maintenance plan created...

The eval was put on the machine as an interim solution while waiting for paper work and order processiing things to happen. All the paperwork and ordering... have been completed and I now have the real SQL Server 2005 Standard Edition license key ....

I am very new to SQL Server and need to determine ...

1. Can I update the eval copy to become permanently licensed?

2. Would I want to upgrade the eval to permanent? Will I lose any capabilities by keeping the current eval setup?

If it is reasonable to keep the eval setup

3. How do I go about entering the license key to make it permanent?

If it is necessary to install the new Standard Edition...

4. How do I install it while maintaining the already defined databases, data, users, maintenance plan...

Thanks in advance for any and all help.

Chris

View 5 Replies View Related

?? 933097 Cumulative Hotfix Package (build 3152) For SQL Server 2005 Service Pack 2 Is Available

Mar 8, 2007

I've read about this hotfix at http://www.kbalertz.com/Feedback_933097.aspx but I can't find anything on microsoft.com about it. It sounds like a worthwhile hotfix, but I'm wondering about the absence of an announcement on microsoft.com.

Anyone else know about this hotfix?

Thanks!

View 3 Replies View Related

Upgrade From SQL Express 2005 Report Server With Advanced Services To SQL 2005 Standard Fails

Feb 25, 2008

I am trying to upgrade SQL Server Express 2005 Report Server to SQL 2005 Standard and it fails with the following error:

SQL Server Setup did not have the administrator permissions required to copy a file: C:Program FilesMicrosoft SQL ServerMSSQL.8Reporting ServicesReportServer
ssrvpolicy.config. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.

After I click OK on the message, this whole path where the upgrade is bieng installed dissapears C:Program FilesMicrosoft SQL ServerMSSQL.8Reporting Services. The error is a bit missleading because the file that it is trying to copy rssrvpolicy.config does appear in that upgrade folder so I am not sure why it would try to copy a file that has already been copied.

I was able to upgrade the Database Engine instance fine but can't upgrade Reporting Services due to that error. I have verified that the account that ran the setup had the administrator permissions. Your prompt reply to my question would be greatly appreciatted.

View 4 Replies View Related

Installation Of SQL Server 2005 Post-SP1 Hotfix 918222 (Build 2153) Fails At Copyengine.cpp Line: 689

Feb 5, 2007

I believe that I mistakenly attempted to apply the Analysis Services component of this update before applying the SQL Server component. The update now fails continuously with the following message:

02/05/2007 17:58:24.990 ================================================================================
02/05/2007 17:58:25.021 Hotfix package launched
02/05/2007 17:58:27.615 Product discovery successfully completed during the install process for MSSQLSERVER
02/05/2007 17:58:27.630 SP Level check successfully completed during the install process for MSSQLSERVER
02/05/2007 17:58:27.646 Product language check successfully completed during the install process for MSSQLSERVER
02/05/2007 17:58:27.661 Product version check successfully completed during the install process for MSSQLSERVER
02/05/2007 17:58:27.677 Command-line instance name check completed during the install process
02/05/2007 17:58:27.693 Baseline build check completed during the install process
02/05/2007 17:58:34.864 Attempting to install instance: MSSQLSERVER
02/05/2007 17:58:34.974 Attempting to install target: CHARLIDEVSRV
02/05/2007 17:58:35.005 Attempting to check for locked files: sqlrun_sql.msp
02/05/2007 17:58:35.052 Attempting to check for locked files: \CHARLIDEVSRVf$44923e05996203228c1608bea1hotfixsqlFilessqlrun_sql.msp
02/05/2007 17:58:35.067 Creating MSP locked file check log at: C:WINDOWSHotfixSQL9LogsSQL9_Hotfix_KB918222_sqlrun_sql.msp.out
02/05/2007 18:01:52.978 MSP returned 1635: This patch package could not be opened. Verify that the patch package exists and is accessible, or contact the application vendor to verify that this is a valid Windows Installer patch package.
02/05/2007 18:01:53.009 Unable to check MSP file: \CHARLIDEVSRVf$44923e05996203228c1608bea1hotfixsqlFilessqlrun_sql.msp
02/05/2007 18:01:53.025 The following exception occurred: Unable to install Windows Installer MSP file Date: 02/05/2007 18:01:53.025 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 689
02/05/2007 18:01:53.212 Failed to install instance: MSSQLSERVER
02/05/2007 18:01:53.259
02/05/2007 18:01:53.259 Product Status Summary:
02/05/2007 18:01:53.290 Product: SQL Server Database Services 2005
02/05/2007 18:01:53.306 MSSQLSERVER - Failure
02/05/2007 18:01:53.321

The update fails although I have cleaned the registry of any reference to it. Another article indicated that the hotfix may delete registry keys required, for instance, to operated SSIS if applied in the wrong order. Here, it appears to be preventing the hotfix from being reapplied. I have ensured that all necessary permissions are available and the services are running in domain user accounts with the necessary rights. I'm the administrator on the machine.

Is there a way to get this hotfix applied without having to completely rip and rebuild my server instance?

View 4 Replies View Related

Cannot Upgrade SQL Server 2005 Express To SP2 After Upgrading SQL Server 2005 Enterprise To SP2

Feb 18, 2008

How do I upgrade Sql Server 2005 Express to SP2 if I also have SQL Server 2005 Enterprise SP2 already on the same box? I installed Sql Server 2005 Enterprise first, then applied SP2, then installed Visual Studio 2008 (which installed SQL Server 2005 Express).

When I try to upgrade Sql Server 2005 Express to SP2 using the special Express edition of SP2, I get an error message that says "None of the selected features can be installed". I end up having to cancel the install of SP2.

I'm left with SQL Server 2005 at level 9.0.3054 and SQL Server 2005 Express at 9.0.3042. How can I bring SQL Server Express 2005 to the same level as SQL Server 2005 Entperprise?

View 2 Replies View Related

Can I Upgrade From Sql 2005 Express To Sql Server 2005 Enterprise Edition ?

Jul 29, 2006

if i upgrade from sql server 2005 expressto sql server 2005 enterprise can i do it ?
am i need to uninstall 2005 express before ?

View 1 Replies View Related

Upgrade From SQL Server 2005 Express To 2005 Enterprise Fails

Dec 29, 2006

Hi

I am trying to upgrade SQL Server 2005 Express to SQL Server 2005 Enterprise Edition.
(As a Preparation to install SQLServer2005 Service Pack 2 (CTP))

I tried to upgrade a particular Instance (OFFICESERVERS, which was based on SQL Server 2005 Express ).

During the upgrade I get a message saying that ...

.....Your upgrade is blocked because of edition upgrade rules.....

All other components I selected for Installation are propertly installed (Analysis, Reporting)

The setup log contains the following detail information:

---- Context -----------------------------------------------
Setting status of unmanaged components and removing unmanaged resources

Error Code: 29543
MSI (s) (DC!C8) [13:57:26:265]: Product: Microsoft SQL Server 2005 -- Error 29543. Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Edition check:
Your upgrade is blocked because of edition upgrade rules. For more information about edition upgrades, see the Version and Edition Upgrades topic in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.

Error 29543. Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Edition check:
Your upgrade is blocked because of edition upgrade rules. For more information about edition upgrades, see the Version and Edition Upgrades topic in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: ValidateUpgrade
PerfTime Start: ValidateUpgrade : Fri Dec 29 13:57:26 2006
<Func Name='ValidateUpgrade'>
<Func Name='updateFeatureSellection'>
Error Code: 0x80077367 (29543)
Windows Error Text: Source File Name: sqlcaupgradeproduct.cpp
Compiler Timestamp: Mon Sep 19 01:07:45 2005
Function Name: sqls::UpgradeProduct::CanUpgrade
Source Line Number: 142

---- Context -----------------------------------------------

I also tried to explicitly upgrade the OFFICESERVERS instance by executing Setup from the command shell:

start /wait setup.exe ADDLOCAL=SQL_Engine INSTANCENAME=OFFICESERVERS UPGRADE=SQL_Engine SKUU
PGRADE=1 /qb

The result is the same, i.e.... Your upgrade is blocked because of edition upgrade rules...

Does anybody know about this problem?
Some more information about the system:
W2K3 R2 Enterprise Edition
WSS3.0
MOSS2007
previously installed SQL Server 2005 Express Edition (Version 9.00.2047.00)

Kinde regards
Andreas

View 5 Replies View Related

Setup And Upgrade :: Can Build Cluster By Adding Cluster Service

Jul 6, 2015

Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.

View 4 Replies View Related

SQL 2005 SP1 Upgrade Error For Upgrade Advisor

Jan 19, 2007

Hi,

We are performing a SQL 2005 SP1 upgrade from SQL 2000 on our Windows 2003 SP1 Standard Edition.

When we run the upgrade, we got a error "Upgrade Advisor Return -1" as a pop-up window.

When we run the Upgrade Advisor separately, we get this error :

===================================

Common Language Runtime detected an invalid program.

===================================

Common Language Runtime detected an invalid program. (System.Xml)

------------------------------
Program Location:

at System.Xml.Schema.SchemaInfo..ctor()
at System.Xml.Schema.XmlSchemaSet..ctor(XmlNameTable nameTable)
at System.Xml.XmlReaderSettings.get_Schemas()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReportController.LoadAndValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReport.ValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAIssueReport.Refresh()
at Microsoft.SqlServer.UpgradeAdvisor.ReportPanel.OpenReport(String reportFile)

We are in a lost for solutions. We do hope to hear from anyone asap...

Greatly appreciated for any kind assistance.

Thanks.

View 1 Replies View Related

SQL 2005 Upgrade Problem - In Place Upgrade

Feb 10, 2007

Hi,

We are running a test upgrade form sql 2000 standard edition 32 bit to sql 2005 developer edition 32bit. Followed through all the steps and specified the account(SA priveleges and currently used by the 2000 version) and is the local admin on the box for the services and the setup seemed to move fine, except for when it got to the point of installing database services - This is the error message that I got:

MSSQLServer could not be started. Verify you have sufficient priveleges to start system services. The was no choice but to hit cancel and then the set up progressed with a final message of 'SEtup failed'.

Here is a portion of the error log:
Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
Database Mirroring Transport is disabled in the endpoint configuration.
Starting up database 'master'.
Converting database 'master' from version 589 to the current version 611.
Database 'master' running the upgrade step from version 589 to version 590.
Error: 946, Severity: 14, State: 1.
Cannot open database 'master' version 589. Upgrade the database to the latest version.
System Task Aggregate global counters produced an error that was not handled. Major: 9, Minor: 46, Severity:14, State:1
Error: 928, Severity: 20, State: 1.
During upgrade, database raised exception 15151, severity 16, state 1, address 01C4C50B. Use the exception number to determine the cause.
Error: 15151, Severity: 16, State: 1.
Cannot find the endpoint 'TSQL Local Machine', because it does not exist or you do not have permission.

Any help would be greatly appreciated

Thanks KR

View 7 Replies View Related

Can't Upgrade To Sql Server 2005 ?

Oct 20, 2007

hi All .

I use Micorosft SQL 2005 upgrade advisor to upgrade from sql 2000 to sql 2005, but I got problem .

here is my problem .

On my machine I have Sql 2000 Developer without server pack, and Sql server 20045 express edition .

Please help me to overcome this problem .

Many thanks in advance .
regards,
QuachNguyen

View 1 Replies View Related

About SQL Server 7.0 Upgrade To 2005

May 25, 2007

There is a system running in win NT with DB SQL server 7.0, and now want to upgrade DB SQL server 7.0 to 2005 and run at window server 2003.

I want to konw that is there any impact to the system at DB part ? all the original script can be run normal when DB upgraded to 2005?

View 4 Replies View Related

SQL Server 2005 Upgrade

Apr 30, 2007

Hi,

I have a problem about upgrading SQL server. We were using sql server 2005 express. Then we removed it and install sql server 2005 enterprise edition.

But now we cant start our services (those written by us .NET c#) We get some errors like

"Login failed for user 'NT AUTHORITYSYSTEM'. [CLIENT: <local machine>] "

What is the problem?

Thanks...

View 1 Replies View Related

OS Upgrade On SQL 2005 Server

Feb 7, 2007

I'm running SQL 2005 on a Windows 2000 server. I would like to upgrade the OS to Windows 2003 server. Is there a whitepaper with all the required steps listed?

Thanks,

Dave

View 2 Replies View Related

SQL Server 2005 Upgrade Advisor

May 8, 2008

Hi All,

Is there a way to print out reports of the errors and warnings created by the
SQL Server 2005 upgrade advisor?

View 1 Replies View Related

Sql Server Upgrade From 2000 To 2005

Jan 31, 2006

I am currently using sql server 2000 and I have just installed sql server 2005 in a separate box that will be used as the production server so I will be upgrading to the new database server soon.

I was reading the upgrade options for this situation and one option is to detach the 2000 database, copy the mdf and log files to the new server and attach it to mssql 2005. Another option is to recreate the tables, views, etc. and export/import the data to the new server.

I would like to ask what the best option is for this situation because I am not sure what the advantages and disadvantages of just detaching/attaching and recreating the database in sql server 2005. If I just detach/attach the database, will there be any disadvantage in the performance because the database files were created in 2000 and is functioning because of backward compatibility in 2005? Would it be better to recreate the database in 2005 and import the data from 2000 so that the database would be running in a way that is designed for 2005?

I am not really sure of the differences of these upgrade options so any ideas would be greatly appreciated.

Thanks in Advance

-Voltaire

View 7 Replies View Related

SQL Server Slower After 2005 Upgrade

Jul 20, 2007

We have an extensive stress test for our OLTP application.that runs slower after upgrading to SQL Server 2005.

We have done the following:

- applied SP1 and SP2

- updated statistics (sp_updatestats)

- recompiled all stored procedures

Some behavior we notice in Perfmon over the course of the 1-hour test is:

- Average CPU Utilization is up from 22% to 32% and we're trying to figure out why

- Compilations per second are up from 200 to 250

- Recompilations per second are down from 5 to 1 (which is good).

- Memory utilization is identical.

- We see exagerated spikes in response times. The general performance

seems pretty good - but there are periodic spikes that hurt our averages.

- I examined perfmon for waits and nothing jumped out.

- A small handful of application workflows are much slower, while most are roughly identical.

I realize there could be a zillion different causes. But if anyone has experience upgrading a large OLTP solution which uses a mixture of dynamic SQL and stored procedures to SS2005 - and tuning the upgraded database - please offer any suggestions.

Our current plan includes (a) running the Best Practices analyzer which already uncovered a trace flag we may want to use since we're running on an 8-way, (b) rebuilding indexes, and (c) examine a SQL Trace this time around too since it appears the slowness is isolated to certain application workflows.

Please offer any suggestions that have worked for your team.

Thanks so much!

Mike

PS I will post all the things we end up doing in the end once we get performance equal or better - hopefully the latter!!!

View 9 Replies View Related

SQL SErver 2005 Upgrade Advisor

Oct 31, 2007

Team,

Got a question about one of the results on the upgrade advisor report.

When to Fix: Before
Description: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Object: SVCACCTREQ

It is looking like some type of permission problem but I cannot find anything about this specific issue.

I am running the advisor from my local machine, on which I am a local administrator, against a remote server where I am just a typical user.

Is this an error that would be corrected if I were to run the upgrade advisor logged into the server as a local administrator? I'm trying to determine whether there is anything that needs to be done with this issue.

Thanks.
Richard

View 3 Replies View Related

Error On Build Solution, If SSIS Project Is Part Of Build

Mar 22, 2006

Hello,

we have automated build on every night. In our solution is SSIS project, where each package is encrypted per password. We call build process per command line like this..

C:ProgrammeMicrosoft Visual Studio 8Common7IDEdevenv.exe (c:DevelopmentX3\X3.sln /build Release)' in 'c:DevelopmentProjectsDailyBuild

Through build process we get a error:

External Program Failed: C:ProgrammeMicrosoft Visual Studio 8Common7IDEdevenv.exe (return code was 1):

We think a reason is, that on build of SSIS project must be entered a password. You can wonder for what we need that SSIS packages are part of our build. We hope that on build process is also created Deployment Utility, if so set in dtproject.user. Is it so? Is there any way to create Deployment utility on automated build process? Can be a password provided pre command line?

with best regards

Anton Kalcik

View 5 Replies View Related

SQL Server 2005 Installation Or Upgrade From 2000

Jul 19, 2006

Hello, I have sql server 2000 personal edition on my PC and I have just got a 2005 DVD. I tried to install it but it is not working. I don't know how to manage my databases. As if there is no graphical managemnt tool. The 2005 is also Personal edition.
I reinstalled the sql 2000, and now I'm trying t upgrade to sql 2005, but still don't know how to do that.
Please someone help me!!!!!!!!!!

View 1 Replies View Related

Why Upgrade To MS SQL Server (be It 2000 Or 2005) From Access (say, 97)?

Dec 1, 2005

Probably this question has been asked hundreds of times and yet netsearch has not generated satisfactory enough answer, at least, to me.And OK, let's assume your organization has more than 200 employees,just one measure to indicate that it's not small and data processingneeds are quite extensive (for both OLTP and OLAP).We've heard so much about concurrency support, stability andperformance. Are there any real persuasive paper out there to talkabout it? Now, let me also put it in another perspective, say, you'rea Microsoft sql server sales guy or gal for that matter for newaccounts. What you got?Thanks.

View 5 Replies View Related

SQL Server 2005 Does Not Work After OS Upgrade To Vista

Jun 27, 2007

My instance of SQL Server Developer stopped working after upgrade of OS from Vista to XP. I have also installed SP1 & SP2. Still it is not working. The message that I get when I start SQL Server Management Studio is "The application cannot start."

View 7 Replies View Related

Upgrade Sql Express SP1 To SQL Server 2005 Standard

Jan 26, 2007

How can I upgrade Sql Express SP1 to SQL Server 2005 Standard ?

View 1 Replies View Related

Sql Server 2000 Upgrade To 2005 Blocked

Mar 4, 2008

I've inherited 6 sql server 2000 boxes. I've upgrade 3 with no trouble. now I have one that gives the message :
"your upgrade is blocked because of cross-language compatibility rules.
For more information about cross-language support, see the version..."

all servers are 2003, sp2. All SQL is Enterprise edition, default language is "english". even the collation order is
the same. why the cross language message? Any help would be good else I'll be forced to rebuild the DB and load application again. ugly!!

dave

View 3 Replies View Related

SQL Server 2005 Express Edition SP2 Upgrade

Mar 12, 2007

Getting error upgrading from SP1 to SP2:

SQL Server Database ServicesConfiguring Components:

The installed has encountered an unexpected error. The error code is 2259. Database: Table(s) update failed

Attached is the section of the SQL setup log where the error occurs:

MSI (s) (70!C4) [10:50:00:107]: PROPERTY CHANGE: Deleting SQLACCOUNT property. Its current value is 'NT AUTHORITYNETWORK SERVICE'.
<Func Name='updateFeatureSellection'>
Attempt to start service when it is already running
SQL service MSSQL$SQLEXPRESS started successfully waiting for SQL service to accept client connections
SQL_SUCCESS_WITH_INFO (1) in OdbcConnection::connect
sqlstate=01000, level=-1, state=-1, native_error=5701, msg=[Microsoft][SQL Native Client][SQL Server]Changed database context to 'master'.
sqlstate=01000, level=-1, state=-1, native_error=5703, msg=[Microsoft][SQL Native Client][SQL Server]Changed language setting to us_english.

<Func Name='SqlComponentUpgrade'>
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='111'>
<Func Name='ProcessHeaderTable'>
<Func Name='ProcessScriptTable'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='ProcessScriptTable'>
<Func Name='GetFileTargetPath'>
MSI (s) (70!C4) [10:50:00:417]: Note: 1: 2259 2: 3: 4:
<Func Name='GetFileTargetPath'>
Error Code: 0x8007065b (1627)
Windows Error Text: Function failed during execution.
Source File Name: darlibviewinstaller.cpp
Compiler Timestamp: Wed Jun 14 16:19:22 2006
Function Name: sqls::ViewInstaller::modify
Source Line Number: 137

---- Context -----------------------------------------------

Setting status of unmanaged components and removing unmanaged resources
Failed to modify installer view
1: 2259 2: 3: 4:

Error Code: 1627
MSI (s) (70!C4) [10:52:33:376]: Product: Microsoft SQL Server 2005 Express Edition -- Error 2259. The installer has encountered an unexpected error. The error code is 2259. Database: Table(s) Update failed

Error 2259. The installer has encountered an unexpected error. The error code is 2259. Database: Table(s) Update failed
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: ValidateUpgrade
PerfTime Start: ValidateUpgrade : Mon Mar 12 10:52:33 2007
<Func Name='ValidateUpgrade'>
<Func Name='updateFeatureSellection'>
<Func Name='SqlComponentUpgrade'>
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='111'>
<Func Name='ProcessHeaderTable'>
<Func Name='ProcessScriptTable'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='GetFileTargetPath'>
<Func Name='ProcessScriptTable'>
<Func Name='GetFileTargetPath'>
MSI (s) (70!C4) [10:52:33:506]: Note: 1: 2205 2: 3: _sqlSqlUpgradeInstallSequence
MSI (s) (70!C4) [10:52:33:506]: Note: 1: 2228 2: 3: _sqlSqlUpgradeInstallSequence 4: CREATE TABLE `_sqlSqlUpgradeInstallSequence` (`Action` CHAR(255) NOT NULL, `Sequence` INT NOT NULL, `Param` CHAR(0), `Retryable` INT NOT NULL, `Fatal` INT NOT NULL PRIMARY KEY `Action`, `Sequence`)
MSI (s) (70!C4) [10:52:33:506]: Note: 1: 2262 2: _sqlSqlUpgradeInstallSequence 3: -2147287038
<Func Name='GetFileTargetPath'>
MSI (s) (70!C4) [10:52:33:516]: PROPERTY CHANGE: Modifying Sql_sqlSqlUpgradeInstallSequence property. Its current value is '310719000'. Its new value: '325719000'.
MSI (s) (70!C4) [10:52:33:516]: PROPERTY CHANGE: Modifying Sql_sqlSqlUpgradeInstallSequence property. Its current value is '325719000'. Its new value: '325759000'.
MSI (s) (70!C4) [10:52:33:516]: PROPERTY CHANGE: Modifying Sql_sqlSqlUpgradeInstallSequence property. Its current value is '325759000'. Its new value: '325769000'.
MSI (s) (70!C4) [10:52:33:516]: PROPERTY CHANGE: Modifying Sql_sqlSqlUpgradeInstallSequence property. Its current value is '325769000'. Its new value: '395769000'.
MSI (s) (70!C4) [10:52:33:526]: PROPERTY CHANGE: Modifying Sql_sqlSqlUpgradeInstallSequence property. Its current value is '395769000'. Its new value: '576338000'.
MSI (s) (70!C4) [10:52:33:526]: PROPERTY CHANGE: Modifying Sql_sqlSqlUpgradeInstallSequence property. Its current value is '576338000'. Its new value: '591338000'.
MSI (s) (70!C4) [10:52:33:526]: PROPERTY CHANGE: Modifying Sql_sqlSqlUpgradeInstallSequence property. Its current value is '591338000'. Its new value: '621338000'.
MSI (s) (70!C4) [10:52:33:526]: PROPERTY CHANGE: Modifying Sql_sqlSqlUpgradeInstallSequence property. Its current value is '621338000'. Its new value: '621438000'.
Couldn't find SQL Agent service SQLAgent$SQLEXPRESS. Skipping service stop

Thanks for your help in advance,

Marty

View 1 Replies View Related

Can SQL Server 2005 Evaluation Be Used To Upgrade A System?

Mar 7, 2006

I have multiple development SQL Servers running Enterprise edition that I want to upgrade for application testing before upgrading our production system. All of the servers meet the hardware and software requirements for SQL Server 2005 Enterprise edition. However, when I try to install to use the SQL Server 2005 Evaluation Edition to upgrade the servers in place, I get the blocked upgrade message:
Name: Microsoft SQL Server 2000
Reason: Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Edition check:
Your upgrade is blocked because of edition upgrade rules. For more information about edition upgrades, see the Version and Edition Upgrades topic in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.

Can the Evaluation Edition be used to upgrade these servers or do you need the full blown version?

thanks

View 4 Replies View Related

SQL Server 2005 Developers Edition Upgrade To SP2

Jun 22, 2007

I have downloaded SQLServer2005SP2-KB921896-x86-ENU.exe and attempted to update to SP2 with no success.

SQL Server 2005 Developers Edition is installed on my computer as part of a Visual Studio 2005 installation.

When I try to run this package under my admin account, I get through the Feature Selection (selecting everything) to Authentication.

When I press the Test button or the Next button, I get "Your account information could not be verified. Press Ok to return to Authentication Mode screen to determine the reason for failure. For setup to verify your credentials the services must be startable, connectable, and you must be a SQL Server administrator."

The Authentication screen shows "Database Services, MSSQLSERVER, Windows, domainusername, Service Failed to Start"

I am a novice SQL Server user, Clearly I am floundering! Any observations, advice, or suggestions would be greatly appreciated.

View 1 Replies View Related