We are migrating our production environment from 32-bit SQL Server 2005, Windows 2003 server to 64-bit SQL Server 2005, Windows 2003 server environment with 4GB of RAM. We have recompiled the SSIS packages to run in 64-bit mode and stored them in database. But one of the package fails with initial information as
Information: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 34720 buffers were considered and 34720 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
And the subsequent error messages received as
Error Message 1
A buffer could not be locked. The system is out of memory or the buffer manager has reached its quota.
Error Message 2
An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
I am exporting 350 tables data from SQL Server 2005 to Access 2003.and getting the below error.
SSIS package "Package2.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC0202009 at Package2, Connection manager "DestinationConnectionOLEDB": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Error: 0xC020801C at Data Flow Task, Destination 64 - CLIMBINGEXP [8065]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "DestinationConnectionOLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Destination 64 - CLIMBINGEXP" (8065) failed the pre-execute phase and returned error code 0xC020801C.
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). It will only work when the Access database is not open. The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009 Source: NewPackage Connection manager "SourceConnectionOLEDB" Description: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
I want to run ssis package in sql server 2005 agent. i've made a new JOB with 3 steps ( 3 ssis package)
But when i run the job, i see only 2 "actions step" in the windows :
Start job ..... Execute job ....
I would like to see at least the execution status of every ssis package and if it's possible, the execution of every task ( to see quickly if there's some error and what's wrong)
I am new to SQL server 2005 and have a config question:
I am controlling database connection info using XML indirect config - no problems there.
Essentially I am going to have a number of packages that need to use a common file path, that might change from one server to the next, e.g. Server 1: C:sourceFiles versus Server 2: D:sourceFiles. Within this directory the filenames will remain static. So in the flat file connection manager I'd like to use a variable to reflect the folder - but I don't want to have to create this for each package.
So, I thought I would create a system environment variable and create expressions for the connection managers - something like %SOURCE_DIR% + "file.csv" - but this does not evaluate correctly.
So then i though I could use the SQL server configurations table with a configurationFilter SOURCE_DIR and appropriate configuration value - but then how do I access this in the flat file connection manager to create a dynamic file name?
So essentially I want a variable/property available globally to all my packages and potential flat file connection managers that help me to centrally control file path locations.
Hi, My name is Vinh, I am a new bee in SQL Server 2005. I am using template script (see below) from SQL Server to create account but when I am right click in database mail for testing email and I got the message, could not connect to mail server.
Below I am trying to use smtp to connect but I know in my company we are using Exchange Mail Server. will that make a lot different?
Please help me,
Thank you very much,
sp_configure 'database mail xps', 1 GO reconfigure GO
------------------------------------------------------------- -- Database Mail Simple Configuration Template. -- -- This template creates a Database Mail profile, an SMTP account and -- associates the account to the profile. -- The template does not grant access to the new profile for -- any database principals. Use msdb.dbo.sysmail_add_principalprofile -- to grant access to the new profile for users who are not -- members of sysadmin. -------------------------------------------------------------
-- Profile name. Replace with the name for your profile SET @profile_name = 'TestProfile';
-- Account information. Replace with the information for your account.
SET @account_name = 'vdang'; SET @SMTP_servername = 'smtp.cgdnow.com'; SET @email_address = 'vdang@cdgnow.com'; SET @display_name = 'Vinh, Dang';
-- Verify the specified account and profile do not already exist. IF EXISTS (SELECT * FROM msdb.dbo.sysmail_profile WHERE name = @profile_name) BEGIN RAISERROR('The specified Database Mail profile (<profile_name,sysname,SampleProfile>) already exists.', 16, 1); GOTO done; END;
IF EXISTS (SELECT * FROM msdb.dbo.sysmail_account WHERE name = @account_name ) BEGIN RAISERROR('The specified Database Mail account (<account_name,sysname,SampleAccount>) already exists.', 16, 1) ; GOTO done; END;
-- Start a transaction before adding the account and the profile BEGIN TRANSACTION ;
IF @rv<>0 BEGIN RAISERROR('Failed to create the specified Database Mail account (<account_name,sysname,SampleAccount>).', 16, 1) ; GOTO done; END
-- Add the profile EXECUTE @rv=msdb.dbo.sysmail_add_profile_sp @profile_name = @profile_name ;
IF @rv<>0 BEGIN RAISERROR('Failed to create the specified Database Mail profile (<profile_name,sysname,SampleProfile>).', 16, 1); ROLLBACK TRANSACTION; GOTO done; END;
-- Associate the account with the profile. EXECUTE @rv=msdb.dbo.sysmail_add_profileaccount_sp @profile_name = @profile_name, @account_name = @account_name, @sequence_number = 1 ;
IF @rv<>0 BEGIN RAISERROR('Failed to associate the speficied profile with the specified account (<account_name,sysname,SampleAccount>).', 16, 1) ; ROLLBACK TRANSACTION; GOTO done; END;
I created a SSIS package which will generate an output file and place it on a remote fileshare location which will look something like this
\RemoteServerNameRemoteFilePath
The package is executing fine when I am executing it through BIDS or through execute package utility and writing the output file to remote file share location.
I created a SQL job for the package and ran the Job. Then, its throwing an error saying
Executed as user: DomainUser. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:33:06 AM Error: 2008-03-10 10:33:22.22 Code: 0xC020200E Source: DFT_Generate Output File Description: Cannot open the datafile " \RemoteServerNameRemoteFilePathOutputFileName.txt". End Error Error: 2008-03-10 10:33:22.34 Code: 0xC004701A Source: DFT_Generate Output File DTS.Pipeline Description: component "FF_DST_Output" (160) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:33:06 AM Finished: 10:33:22 AM Elapsed: 15.891 seconds. The package execution failed. The step failed.
DomainUser have all the permissions on the remote file share location. SQL server agent is running with the log-on account DomainUser(same as the above).
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
I am trying to copy a database from our company's external SQL Server(production) to our local SQL Server(development). The Copy Database wizard fails on the step "Execute SQL Server Agent Job". Following is the error in the log file.. Please advise
InnerException-->An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute: Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error: Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM Progress: 2006-08-16 18:59:41.29 Source: Data Flow Task Validating: 0% complete End Progress Progress: 2006-08-16 18:59:41.29 Source: Data Flow Task Validating: 33% complete End Progress Progress: 2006-08-16 18:59:41.71 Source: Data Flow Task Validating: 66% complete End Progress Progress: 2006-08-16 18:59:41.73 Source: Data Flow Task Validating: 100% complete End Progress Progress: 2006-08-16 18:59:41.77 Source: Data Flow Task Validating: 0% complete End Progress Progress: 2006-08-16 18:59:41.77 Source: Data Flow Task Validating: 33% complete End Progress Progress: 2006-08-16 18:59:41.77 Source: Data Flow Task Validating: 66% complete End Progress Progress: 2006-08-16 18:59:41.77 Source: Data Flow Task Validating: 100% complete End Progress Progress: 2006-08-16 18:59:41.79 Source: Data Flow Task Prepare for Execute: 0% complete End Progress Progress: 2006-08-16 18:59:41.79 Source: Data Flow Task Prepare for Execute: 33% complete End Progress Progress: 2006-08-16 18:59:41.79 Source: Data Flow Task Prepare for Execute: 66% complete End Progress Progress: 2006-08-16 18:59:41.79 Source: Data Flow Task Prepare for Execute: 100% complete End Progress Progress: 2006-08-16 18:59:41.81 Source: Data Flow Task Pre-Execute: 0% complete End Progress Progress: 2006-08-16 18:59:41.84 Source: Data Flow Task Pre-Execute: 33% complete End Progress Progress: 2006-08-16 18:59:41.90 Source: Data Flow Task Pre-Execute: 66% complete End Progress Progress: 2006-08-16 18:59:41.90 Source: Data Flow Task Pre-Execute: 100% complete End Progress Progress: 2006-08-16 18:59:41.92 Source: Data Flow Task Post Execute: 0% complete End Progress Progress: 2006-08-16 18:59:41.92 Source: Data Flow Task Post Execute: 33% complete End Progress Progress: 2006-08-16 18:59:41.92 Source: Data Flow Task Post Execute: 66% complete End Progress Progress: 2006-08-16 18:59:41.92 Source: Data Flow Task Post Execute: 100% complete End Progress Progress: 2006-08-16 18:59:41.92 Source: Data Flow Task Cleanup: 0% complete End Progress Progress: 2006-08-16 18:59:41.93 Source: Data Flow Task Cleanup: 33% complete End Progress Progress: 2006-08-16 18:59:41.93 Source: Data Flow Task Cleanup: 66% complete End Progress Progress: 2006-08-16 18:59:41.93 Source: Data Flow Task Cleanup: 100% complete End Progress Progress: 2006-08-16 18:59:41.95 Source: Send Mail Task The SendMail task is initiated.: 0% complete End Progress Progress: 2006-08-16 18:59:42.09 Source: Send Mail Task The SendMail task is completed.: 100% complete End Progress DTExec: The package execution returned DTSER_SUCCESS (0). Started: 6:59:40 PM Finished: 6:59:42 PM Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
I downloaded the SQL server 2005 trival version (180 days trival peroid) from the MS website. But i got a error saying that I have don't have enough space to extract the package on my C: drive when I do the installation. Actually I have 13g space on my c drive, so I may be miss something? I looked up the internet and found a solution using SET TEMP=C:TEMP and SET TMP=C:TEMP, but it doesn't work for me.
Does anyone have a better idear? I had a SQL 2005 express edition installed on my laptop before, but I have remove it, maybe I did not remove it completely and cause this problem?
I have added reffrence for DTS Run time (using Microsoft.SqlServer.Dts.Runtime;)
But I am getting an Error like this
Error 1 'Application' is an ambiguous reference between 'System.Windows.Forms.Application' and 'Microsoft.SqlServer.Dts.Runtime.Application' C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 17 WindowsApplication1
Error 2 'Application' is an ambiguous reference between 'System.Windows.Forms.Application' and 'Microsoft.SqlServer.Dts.Runtime.Application' C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 39 WindowsApplication1
Error 3 The type 'System.Windows.Forms.Application' has no constructors defined C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 35 WindowsApplication1
While I am trying to install SQL server 2005 I get the following message - "Machine does not have a product that matches the installation package". The installation does not occur.
I am using Windows 2000 Professional SP4 and using 32 bit installer - SQLServer2005SP2-KB921896-x86-ENU.exe
I open a package in SSIS I get the following errors.Validation error. Create TestKeys For Scan Records: TestKeys Table in AEISIT Import db [1]:The AcquireConnection method call to the connection manager "AEISIT Upload" failed with error code 0xC0202009. ScanUpload.dtsx 0 0 I open my connections in the connection manager and set them to the (local) server and the errors go away.Then I close and reopen the package and the errors are back.What am I doing wrong??
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
The master package has a configuration file, specifying the connect strings The master package passes these connect-strings to the child packages in a variable Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s. We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1: The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€? Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2: When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3: When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4: When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€? Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
I am trying to run an update statement. Both these tbls were migrated from 2000 to 2005.. However the upgrade returnes the foll err. Cannot resolve the collation conflict between "SQL_Latin1_General_Pref_CP437_CI_AS" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
Update statement is as follows:
Update a Set FIELDNAME='C' From table1 a where ACCT in (select loannum from table2 b where a.ACCT=b.ACCT) and ACCT is not null
Hi... hopefully someone can help me out with resolving this error.
We have a set of DTS tasks that have been migrated in SSIS tasks on an existing SQL 2005 server, all is fine there and the tasks run ok.
We now want to deploy a copy of the same tasks to another SQL 2005 server at another organisation, so obviously we'll need to change things like server names and file paths. The tasks update different tables in a SQL database on the same server taking information from flat files. The SSIS dtsx files contain embedded DTS tasks. I've been able to view these successfully using the tools in Visual Studio 2005.
I have created a deployment utility for the SSIS files and installed them on the new server.
When I try and run the first SSIS task on the new server it fails validation with the error "Package name is not specified". Having looked at the task in Visual Studio everything looks ok.
Does anyone know whats going on here and how to resolve it?
we have developed SSIS package in machine1 .when we copy the SSIS solution from Machine1 to Machine2 .when we open the SSIS solution in machine2 we are getting the following errors what could be the reason .help us pls.
1. Error loading Package_test.dtsx: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. d:jeganssis prjsfuzzyfuzzyPackage_test.dtsx 2.Validation error. Data Flow Task: Fuzzy Grouping [3131]: The AcquireConnection method call to the connection manager "AIGSSPORTAL.Apex1.g360user" failed with error code 0xC0202009. Package_test.dtsx
[OLE DB Destination [1146]] Error: An OLE DB error has occurred. Error code: 0x80040E23. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E23 Description: "Cursor operation conflict". [DTS.Pipeline] Error: The ProcessInput method on component "OLE DB Destination" (1146) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
have any of u encountered this error?
package is working good on source side but destination is indicated in red with the above error,it was working good yesterday,not sure what happened today all of a sudden.
I have an SSIS package stored on the file system and I want to execute it from a Visual Studio 2005 VB project. I have searched the internet for examples and have been unable to find any examples. I gather that I will be using SQLSMO however I'm at a loss on how to do this task. Any help is appreciated! Thanks.
Hi i get a error when i run my SSIS package. Here is the message
Error: 0xC02020A1 at import file, Flat File Source [1]: Data conversion failed. The data conversion for column "su_supplier_code" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". Error: 0xC020902A at import file, Flat File Source [1]: The "output column "su_supplier_code" (61)" failed because truncation occurred, and the truncation row disposition on "output column "su_supplier_code" (61)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
The funny thing about this is when i run the job a 2nd time it works fine.
Has any one any idea about this error or why the job would work fine the 2nd ?
I can't import a package from the SSIS to the file system of my SQL Server Management Studio. Every time i've tried the following message appears. What should i do to correct this problem? Any ideas?
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToDtsServer(Package pPackage, IDTSEvents pEvents, String sPackagePath, String sServerName) at Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction.ImportPackage(ImportPackageAsForm dlg)
1. I am trying to load data from AS400 DB2 to SQL Database using integration services.
2. I am using microsoft ole DB for Db2 driver to pull data from AS400 and using native SQL driver to load data into MS SQL 2005.
AS400 View to pull this data is---
SELECT UPPER(CHAR(SVSGVL)) AS AccountID, UPPER(CHAR(SVLDES)) AS AccountDesc, INT(SVSGTP) AS AccountTypeID, INT(SVTR) AS TranslationMethodID, INT(SVDEF) AS AccountValue, INT(SVRM) AS RemeasurementID FROM V820PRMF.GSVL01 WHERE (UPPER(SVSGMN) = 'ACCT') ORDER BY AccountID
AccountID String[DT_STR] Lenhth-16
AccountDesc String[DT_STR] Length -30
All other column is int.
MS SQL 2005 is were data to be loaded. Table Info.
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Integration Package
[Destination - Account [34]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
[Destination - Account [34]] Error: There was an error with input column "ACCOUNTID" (284) on input "Destination Input" (47). The column status returned was: "The value violated the integrity constraints for the column.".
[Destination - Account [34]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (47)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (47)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Account" (34) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Hello Everyone, When i try to scedule a job on SQL Server Management Studio it gives the Following Error:
Unable to cast object of type 'Microsoft.SqlServer.Management.Smo.SimpleObjectKey' to type 'Microsoft.SqlServer.Management.Smo.Agent.JobObjectkey'.(Micorsoft.SqlServer.Smo)
Can anyone tell me why ?
MS SQL Server Details:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
