SQL Server 2005 Security Setup For ASP.Net Web Application Data Access - HELP!

Nov 17, 2007



Here is my situation: I am creating a database driven ASP.Net web application that will be used over the internet. My ASP.Net application connects to my SQL server 2005 database/server by using a SQL server login. I am using the DPAPI API to encrypt my connection stings with a hidden entropy value for extra security. I am using the SQL login for obvious reasons, as my users will not have a windows login.

What I am trying to do: I want to limit this SQL login account to be able to just run/execute stored procedures and NOT access the tables or views directly. In my ASP.Net application I am using the MS applications data block, and I am using stored procedures for every single database access action. There is no inline SQL being executed from my web application.

What I have tried so far:


I created a new schema and made the above SQL login account owner of this schema. I then granted "Execute" permissions to the SQL login and DENY permissions to all other permissions.

I created an database role with "Execute" only permissions and DENY permissions to all other permissions.

What Happened: In BOTH of the above scenarios I tested a direct SQL statement against one of my tables, from my ASP.Net application and I was able retrieve data back, NOT GOOD, exactly what I am trying to STOP.

If someone could give me (Step-by-Step) guide on how to setup the situation I am looking for, I would be very grateful!


Thanks to all that help!

View 13 Replies


ADVERTISEMENT

SQL Server Security Setup For Web Application Access

Jun 6, 2007

All:

I am writing an Internet/Extranet based (ASP.Net 2.0) web application that uses SQL server 2005 as the database. I am using forms authentication on my web application. I am also storing the connection string to SQL server in my web config file. The conn string is encrypted using DPAPI with entropy. I currently have created a SQL login account on my SQL server for use by the web application. This is the user ID I am using in my conn string. The reason for this is because all persons using the application will NOT have a windows login.

Here is my question: The login I created currently has defaulted to the "dbo" role and therefore has "dbo" rights to the database. I want to setup up this login account so that all it can do is execute stored procedures. I dont want this SQL login to be able to do anything else. In my application I am using stored procedures for ALL data access functions, via a data access layer in my application. Can someone guide me step by step as to how to setup this type of access for this SQL login.

Thanks,

Blue.

View 1 Replies View Related

SQL Server 2k Security Setup On Application Server

Apr 13, 2004

Hi all

If i wanted to set up my SQL Server DB to run in an Application Server environment (i.e. clients connecting to a remote server)
would i be required to give every user a WINDOWS SERVER logon as well as a SQL Server logon or would i only need to setup just a SQL Server logon for them?
(obviously using SQL Server Security opposed to NT Integrated Security)

Thanks in advance for any help

View 3 Replies View Related

How Can I Access Data To SQL Server 2005 Using Windows Application,ADO.net And .Net Remoting.

May 3, 2007

How can I access data to SQL server 2005 using Windows form application,ADO.net and .Net remoting?

Can anybody help me? please...

View 5 Replies View Related

ASP.Net 2.0 Application Connection To SQL Server 2005 - Setup Questions

Jun 5, 2007

All:
 I am writing an Internet/Extranet based (ASP.Net 2.0) web application that uses SQL server 2005 as the database. I am using forms authentication on my web application. I am also storing the connection string to SQL server in my web config file. The conn string is encrypted using DPAPI with entropy. I currently have created a SQL login account on my SQL server for use by the web application. This is the user ID I am using in my conn string. The reason for this is because all persons using the application will NOT have a windows login.
Here is my question: The login I created currently has defaulted to the "dbo" role and therefore has "dbo" rights to the database. I want to setup up this login account so that all it can do is execute stored procedures. I dont want this SQL login to be able to do anything else. In my application I am using stored procedures for ALL data access functions, via a data access layer in my application. Can someone guide me step by step as to how to setup this type of access for this SQL login.
 Thanks,
Blue.

View 4 Replies View Related

Can Not Setup SQL Server 2005, Progress Stops At 'setting File Security'

Jun 8, 2007

Dear Helpers,



I can not setup SQL server 2005 express and the full trial version as well.



The setup progress stops at "setting file security", and nothing happens. I dont even get an error message.



This is very annoying. I have local administrator access, so it should work. Op system: Windows XP professional.

Machine: Hp Compaq dc7700p, 1 GB RAM, 80 GB HDD



Thanks for your help in advance.

View 5 Replies View Related

Using Integrated Security From .Net Web To Access SQL Server 2005

Oct 19, 2007



If I am posting to the wrong forum, please point me in the right direction.
We have upgraded to SQL Server 2005 and Window 2003 from SQL Server 2000 and Windows 2000, and have been having all kinds of problems with security of our web applications. We have been forced to put the system account of the web server as a user in the database in order for the web applications to work. We have lost the ability to control security at the user/role level. Is this the way security is going to work in Windows 2003/SQL Server 2005? How do I use integrated security so that I can secure web pages and database objects?
Thanks

View 4 Replies View Related

How To Set My ASP.NET Application To Access SQL Server 2005 Using Client's User Credentials?

Jan 29, 2007

Hi guys,I'm not sure if I'm just bad at googling but I can't seem to find a way to set an ASP.NET 2.0 web application to connect to SQL Server 2005 using the current client's user credentials. My web application is using Integrated Windows Authentication so its Page.User.Identity is set to a DOMAINusername value... I want to pass that to my connectionstring or have my connections pick up the identity automatically and use that Identity when accessing the db server.Oh and another thing, my IIS Application Pool is using a specific Identity itself, so I don't know if that might affect the above.Hope someone could help. 

View 2 Replies View Related

I Cannot Get The SQL Server 2005 Roles, Schemas, Users Correctly Setup For Proper Access

May 16, 2008

I have been struggling with this for a while and cannot get it right. I have read countless articles on the internet as well as MSDN documentation about SQL Server 2005 and no success so far.

What I want is a database with multiple SCHEMAS, DATABASE ROLES and USERS in order to have a finer grade of security to access the various objects.

My schemas are (in order to simplify the situation and provide an example of the setup):

- [dbo] the standard DBO schema which is always default. Contains public objects.
- [com] a special module integrated into the system
- [ofc] contains objects used by back-office only
- [aud] contains objects used for auditing, etc.

Each of these schemas has their fair share of tables, views, functions and stored procedures which have been created appropriately (i.e. CREATE TABLE [ofc].[Addresses]), in other words prefixed by the name of the schema to which they belong.

Then I have created various database roles (don't confuse them with SQL2005 application roles) as follows:

- PublicRole mostly used for viewing, no data alterations
- WorkerRole used by front end processes that need write access to data in [dbo] and [aud]
- OfficeRole used by back-office for dealing with backoffice data (basically [ofc], [aud] stuff)
- AdminRole used by application administrator

Each of these database roles has been defined with owner 'dbo', none of them own any schemas. And last but not least to each of these roles I have selected the above named schemas (dbo, ofc, aud) as securables and for each of those securables schemas I have then given the correct set of GRANT/DENY on the Alter, Control, Delete, Execute, Insert, References, Select, Update, Take ownership and View definition.

As an example, the PublicRole role has been given the following permissions (Y=GRANT, N=DENY):

Table #1 of Application Permissions [dbo] [com] [ofc] [aud]Alter N N N N
Control N N N N Delete N N N N Execute Y Y N Y Insert N N N Y References Y Y N Y Select Y Y N Y Update N N N Y Take ownership N N N N View definition N N N N

And I have the following minimum set of database users defined (the server login has the same name):

- upublic, assigned to PublicRole
- uworker, assigned to WorkerRole
- uoffice, assigned to OfficeRole
- uadmin, assigned to AdminRole

As I understand when I assign these users to a particular custom Database Role, the users inherit the permissions granted to THAT role thus liberating me from having to assign the permissions to each and every user account on the same role.

What I expected was that when I logged in to the database with the upublic user account I would at least be able to view (SELECT at least) ALL the objects with the exception of those in th e[ofc] schema. Unfortunately the account is not able to access ANYTHING at all, I get an error like

"The SELECT permission has been denied on object XYZ, database DB, schema 'dbo'"

So, when I use Management Studio to look at the properties I selected the PublicRole and it showed the upublic user as a member of the role (Members of this role). So far so good.

Then when I switch to the Securables page for this role it shows all the schemas I defined and for each of them the same list shown in Table #1 except it has two lines for each permission, the first for Grantor dbo and the second for Grantor upublic. The first has the same permissions I assigned to the role (as shown on Table #1) but the 2nd does not show a checkmark on either GRANT or DENY!!! For example ([x] = checked, [ ] unchecked):

Table #2 Explicit permissions for Securable
Permission Grantor Grant Grant-with Deny
Select dbo [x] [ ] [ ] Select upublic [ ] [ ] [ ]

What am I doing wrong here? Apparently I then have to repeat the whole grant/deny for EACH and EVERY USER I define when the idea was that I would grant/deny on the database role and every member of that role would inherit those permissions automatically.

View 3 Replies View Related

Why SQL 2005 Express Setup Need To Close Application Before Continuing?

Mar 6, 2008



I install SQL Express from my application with Process.Start().
But the installation tells me that i have to close my application.

"The following application should be closed before continuing...."

Why ? What is checked by setup?

View 1 Replies View Related

Data Access :: INSERT Statement Conflicted With FOREIGN KEY Constraint On Application Server

Jul 31, 2015

I get the below error on the event log of my application server which uses SQL database.

Details: RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:a5f70248-b545-4d35-7c84-e7aa87610ee4. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database "OperationsManager",
table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.

The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:a5f70248-b545-4d35-7c84-e7aa87610ee4. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.The statement has been terminated..

Details: RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:a5f70248-b545-4d35-7c84-e7aa87610ee4. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database "OperationsManager", table "dbo. BaseManaged Entity", column 'BaseManagedEntityId'.The statement has been terminated..

View 5 Replies View Related

SQL Server Setup Failed To Modify Security Permissions

Feb 19, 2007

Last night at home on my 64 bit Vista machine, I encountered the same error 29506 that said that the management studio express could not be installed.  I looked up the error message and below is what I received.  I also installed the 64 bit .net framework which installed just fine before trying to install the SSSME.

I followed the instructions below but this did not seem to make a difference.  However, I did not reboot after applying new permissions.  I have installed this software a few times now on 32 bit machines for both XP and RC1 Vista, and have not had a problem.  Last night, I did use the 64 bit version.  Also, there is no data file yet because after the install it rolls back, so I gave myself Full permissions on the SQL server directory which should include all sub directories, right?  Thanks, Teri
Error 29506.
SQL Server Setup failed to modify security permissions on file Drive:Program FilesMicrosoft SQL ServerMSSQL.xMSSQLData for user SYSTEM. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that exists on the destination drive.

Note A SQL Server service pack refers to SQL Server 2005 Service Pack 1 (SP1) and later service packs.
CAUSE
This problem occurs because one or more data files exist that do not have the required permissions. By default, the Full Control permission of the Administrators group is granted to the data file when you create a database. If the permission of this group is removed from the data file, the SQL Server 2005 service pack setup will fail.
RESOLUTION
To resolve this problem, grant the Full Control permission to the Administrators group on all data files and on the Data folder. To grant the Full Control permission to the data files, follow these steps:



1.
Locate the folder that contains the data files. By default, these files are located in the following folder:
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData

2.
Right-click the data file that has no required permissions for the Administrators group, and then click Properties.

3.
If the Administrators group is not in the Group or user names list, click Add, type Administrators, and then click OK.

4.
Click Administrators in the Group or user names list, and then click to select the Allow check box for the Full Control item in the Permissions for Administrators list.Note If the files in the Data folder have an orphan owner, you have to take ownership of the files and then grant the Full Control permission to the files. We recommend that you do not change the default permissions for the data files.

View 5 Replies View Related

Linux Application In C/C++ To Access SQL 2005

Sep 11, 2007

My application is written in C/C++ on Linux platform. I am wondering if there is a C/C++ driver for Linux to access SQL server.

thanks.

View 3 Replies View Related

Setup Of Security / Integrated Win Security On Vista

Jul 6, 2007

I have Sql Server Express installed on Vista (service pack 2)

I have Visual Studio 2005 with an application that I'm trying to access it with within a WCF service.



The login ID of the service is added to the database.

The database has remote access turned on.

The ID is granted access to all databases within the server.

The thread is being set with WindowsProvider and the services set their thread to WindowsProvider.

The dataserver is set with using Windows Authentication for security.



When I open my connection to the database, though, it reports the typically useless message that the connection is not allowed and that the server may not allow remote connections.



How to I get past this? I've done everything right.

View 1 Replies View Related

Using User Defined Data Type (UDT) In A Sql Server 2005 Database + Window Application.

Feb 18, 2006

Hi,

I am using VS2005 C# + sql server 2005 Express edition.

I need to using a database that uses my own defined data types to define its tables columns.

I already have designed a Database projact and create the new UDT as follows:



Create a new Database project in the Visual C# language nodes.


Add a reference to the SQL Server 2005 database that will contain the UDT.


Add a User-Defined Type class.


Write code to implement the UDT.


Select Deploy from the Build menu.

Now I need to ask some quistions:

1- When I try to add a new query to a table that contains my new data type in its columns,if I try to exexute the query the next message appears:

'Execution of user code in the .Net framework is disabled. Enable "clr enabled" configuration option'.

How can I doing that??

2- I need to use that database - which has the new data type - in a traditional ' Visual C# Windows Application' instead of 'Database', but:

when I try to add a new Data Source that contains the tables that have the new data types in its definitions, the next message appears:

'<AyaDatabase.dbo.MyNewUDTTable>

User-defined types(UDTs)are not supported in the Dataset Designer.'

So, how can I resolve that problem??

please help me.

Thanks in advance for any help.

Aya.



View 4 Replies View Related

Can .NET Application Access SQL 2005 Express Remotely?

Jul 24, 2007

I am tring to access the SQL 2005 Express which installed in remote machine. Front end app is on Visual Studio 2005. Try to connect SQL Express using the application Layer which is installed on the computer where SQL Express is installed. Could not fetch data from the SQL Express. What could be the problem?



With Regards,

ADK

View 1 Replies View Related

Setup ODBC Data Source For Access

Jul 16, 2013

I am trying to setup an ODBC data source for Access. The server I'm trying to connect to is 2008 R2. I have SQL Server Management Studio installed on the computer where I'm trying to make the ODBC Data Source from. I can connect the the remote 2008 server through Management Studio, but in the ODBC wizard I do the following:

"Machine Data Source" tab, click "New"
Select "User Data Source", click "Next >"
Select "SQL Server", click "Next >"
Click "Finish"
Name: remote
Description: remote
Server: type the server name ie "sql.somewhere.com"

[code]....

View 11 Replies View Related

The Data Access Application Block

Nov 10, 2005

Hi,
Is there anyway I can impliment this in my application without installing it as a COM. My Web Hoster says they won't install it. The Data Access Application Block

View 3 Replies View Related

Data Access Application Block

May 1, 2008

Does anybody knows, from where can I download the latest version of DAAB for SQL CE 3.5?



I know that the Moblie Client Softvare Factory was included a DAAB, but it is outdated in some respect.

So any information will be greatly appreciated.

Gabor

View 3 Replies View Related

Error 29506. SQL Server Setup Failed To Modify Security Permissions

Aug 15, 2007

Received the following error while installing SP2

MSI (s) (D8!A0) [21:07:09:062]: Product: Microsoft SQL Server 2005 -- Error 29506. SQL Server Setup failed to modify security permissions on file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData for user Administrator. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that exists on the destination drive.

Tried running install with a domain account and local account with same results.

Based on the error message, I checked permission on the drive and still received the same error.

Followed resolution based on KB 916766, this did not resolve the error.

Only possible resolution I found was to disable UAP, reboot and retry the install. This will be done as a last resort, but any other suggestion will be appreciated.


Many Thanks

View 3 Replies View Related

Access To MSSQl 2005 Upgrade Challenge With ASP Web Application

Feb 26, 2008

To whom it may concern,

I have developed a web application using ASP 3.0 with a Access DB 2002 backend. I have decided to recently to upgrade the database to SQL 2005 but I am having issues that I cannot work out because I am new to MsSql Language. It appears that the FORMAT function in Access does not work in MsSql ( does not recognise the function ) along with some of the PIVOT and TRANSFORM calls (coming up with "Syntax error near "..."") . Please see the below code. The areas that are showing up as errors when the application is run are highlighted in red.

Thanking you in advance
Darren


<!-- #include file="./../../common/includes/i_header_login.asp" -->
<link href="../../common/css/proceduremanual.css" rel="stylesheet" type="text/css">

<%Sub RecordsetToCSV(ByRef RS, ByVal CSVFilePath, ByVal IncludeFieldNames)
Set objCSVFile = CreateObject("ADODB.Stream")
Call objCSVFile.Open

If IncludeFieldNames Then
'string concatenation issues aren't a problem for a small string of field names
For Each Field In RS.Fields
If FieldNames = "" Then
FieldNames = Field.Name
Else
FieldNames = FieldNames & "," & Field.Name
End If

Next
FieldNames = FieldNames & vbCRLF
Call objCSVFile.WriteText(FieldNames, 1)
End If

Call objCSVFile.WriteText(FieldNames & RS.GetString(adClipString, , ",", vbCRLF, ""))
Call objCSVFile.SaveToFile(CSVFilePath, 2)
Set objCSVFile = Nothing
End Sub
%>
<%
function evaluate(pFormula, pUserID, pMonth, pYear)
if isnull(pFormula) then
evaluate = 0
exit function
end if
x = 0
key = ""
zero = "0"
nine = "9"
eFormula = ""
lf = len(pFormula)
for i = 1 to lf
c = mid(pFormula,i,1)
if x = 1 and c >= zero and c <= nine then key = key & c
if x = 1 and (c < zero or c > nine or i = lf) then
set rsd = cn.execute("select sum(total) from Data where UserID = " & pUserID & " and month(weekEnding) = " & pMonth & " and year(weekEnding) = " & pYear & " and GroupTaskID=" & key)
eFormula = eFormula & rsd.fields(0)
rsd.close
key = ""
if c < zero or c > nine then x = 0
end if
if c = "v" then
key = ""
x = 1
end if
if x = 0 then eFormula = eFormula & c
next
on error resume next
evaluate = round(eval(eFormula),0)
'if err then evaluate = err.description & ": " & eformula
if err then evaluate = 0
end function
%>
<%
period = split(request.form("period"),",")
if ubound(period) = 1 then
mmmm = period(0)+0
yyyy = period(1)+0
else
mmmm = 0
yyyy = 0
end if
%>

<div align="left" class="MainBodyText" style="width: 100%; height: 100%">

<div align="left" valign="top" width="200" style="margin:5; padding:3; font-family:arial; font-size:10pt; font-weight:bold; font-color000000;" >
<% if session("groupid") = 1 then%>
<a href="../main/administration.asp"> <<< Administration Home</a><br><br>
<a href="manager_report.asp"> <<< Managers Report Home</a>
<%end if %>
<%if session("groupid") = 2 then%>
<a href="../main/manager.asp"> <<< Manager Home</a><br><br>
<a href="manager_report.asp"> <<< Managers Report Home</a>
<%end if %>
<%if session("groupid") = 3 then%>
<a href="../main/user.asp"> <<< User Home</a>

<%end if %>

<%if session("groupid") = 4 then%>
<a href="../main/general.asp"> <<< Home</a><br><br>
<a href="manager_report.asp"> <<< Managers Report Home</a>

<%end if %>

</div>
<p align="center" class="MainBodyText">
<img src="../../images/si.gif" align="center"><br><b>Month to Date Dashboard</b></p>
<p align="center" class="MainBodyText">
To use the Print Page function please select the period required then select
view report. You can then select Print Page which will print out the rendered
page.</p>
<form name="f1" method="POST" action="dialmtd.asp">
<div id="printReady">
<table align="center" border="0" width="663" style="border-collapse: collapse" bordercolor="#111111" cellpadding="2">
<tr>

<td align="left" width="127"><font face="Arial" size="2">
<select name="benchmarkgroup" style="color: #000000; border: 0px solid #000000; background-color: #FFE737">
<option value="0" <%if request.form("benchmarkgroup") = "" then response.write "selected"%>>Select Report
<% set rs = cn.execute("select TaskGroupID,TaskGroup from BenchmarkGroups where Active = 1 order by TaskGroupID")
do until rs.eof
if request.form("taskgroupid")+0 = rs.fields(0) then selected = "selected" else selected = "" %>
<option value=<%=rs.fields(0) & " " & selected%>><%=rs.fields(1)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>

<td align="left" width="143"><font face="Arial" size="2">
<select name="period">
<option value="" <%if request.form("period") = "" then response.write "selected"%>>Select Period
<% set rs = cn.execute("select year(WeekEnding), month(WeekEnding), format(Weekending,""mmmm yyyy"") from data group by Year(WeekEnding), Month(WeekEnding), format(WeekEnding,""mmmm yyyy"") order by 1,2")
do until rs.eof
x = rs.fields(1) & "," & rs.fields(0)
if request.form("period") = x then selected = "selected" else selected = "" %>
<option value=<%=x & " " & selected%>><%=rs.fields(2)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>

<td align="left" width="117"><font face="Arial" size="2">
<select name="stateid">
<option value="0" <%if request.form("stateid") = "" then response.write "selected"%>>All States
<% set rs = cn.execute("select stateid,state from tblState where benchmarkactive order by state")
do until rs.eof
if request.form("stateid")+0 = rs.fields(0) then selected = "selected" else selected = "" %>
<option value=<%=rs.fields(0) & " " & selected%>><%=rs.fields(1)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>
<td align="left" width="127"><font face="Arial" size="2">
<select name="countryid">
<option value="0" <%if request.form("countryid") = "" then response.write "selected"%>>All Countries
<% set rs = cn.execute("select countryid,country from tblCountry where benchmarkactive order by country")
do until rs.eof
if request.form("countryid")+0 = rs.fields(0) then selected = "selected" else selected = "" %>
<option value=<%=rs.fields(0) & " " & selected%>><%=rs.fields(1)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>
<td align="left" width="129"><input type="image" src="../../Images/view-report.gif" onclick="f1.submit()" name="f1" alt="Click Here to Generate Report"></td>
<td width="127"><input type="image" src="../../Images/print-report.gif" rname="printMe" onClick="printSpecial()" alt="Click Here to Print the Page"></td>

</tr>
</table>
<% if mmmm > 0 then %>
<table border="0" width="450" align="left" style="margin-left:10px; border-collapse: collapse" bordercolor="#111111" cellpadding="2" cellspacing="4">
<thead>
<tr>
<% sql = " where 1 = 1 AND BenchmarkGroup =" & request("benchmarkgroup")
if request.form("stateid")+0 then sql = sql & " and stateid = " & request.form("stateid")
if request.form("countryid")+0 then sql = sql & " and countryid = " & request.form("countryid")
set rs = cn.Execute("TRANSFORM First(UserID) SELECT description, minimum, mintype, formula FROM BenchmarksActiveUsers" & sql & " GROUP BY displayOrder, description, minimum, mintype, formula ORDER BY displayOrder PIVOT Name")
lastfield = rs.fields.count-1
s = 4 %>
<td align="left" bgcolor="#C0C0C0"><font face="Arial" color="#000000" size="2"><b>Benchmark</b></font>&nbsp;</td>
<td align="center" bgcolor="#C0C0C0"><font face="Arial" color="#000000" size="2"><b>Company Average</b></font>&nbsp;</td>
<% for i = s to lastfield %>
<% next %>
</tr>
</thead>
<tbody>
<br>
<% dim v()
do until rs.eof
min = int(rs.fields("minimum"))
mintype = rs.fields("mintype")
sumv = 0
avg = 0
n = 0
for j = s to lastfield
redim preserve v(j)
v(j) = evaluate(rs.fields("formula"),rs.fields(j),mmmm,yyyy)
sumv = sumv + v(j)
n = n + 1
next
if n > 0 then avg = round(sumv / n) %>
<tr><td></td><td align="center" valign="bottom"><font face="Arial" size="2">Target: <%=min%> <%=mintype%></font></td><td></td></tr>
<tr>
<td bgcolor="#FFFFFF">
<p align="right"><font face="Arial" size="2"><%=rs.fields("description")%></font></td>

<td bgcolor="#FFFFFF">
<p align="center"><font face="Arial" size="1"><% If (avg/min)*100 <=12 Then %><IMG SRC="../images/dial-1.gif">
<% ELSEIF (avg/min)*100 <=24 Then%><IMG SRC="../images/dial-2.gif">
<% ELSEIF (avg/min)*100 <=36 Then%><IMG SRC="../images/dial-3.gif">
<% ELSEIF (avg/min)*100 <=48 Then%><IMG SRC="../images/dial-4.gif">
<% ELSEIF (avg/min)*100 <=60 Then%><IMG SRC="../images/dial-5.gif">
<% ELSEIF (avg/min)*100 <=72 Then%><IMG SRC="../images/dial-6.gif">
<% ELSEIF (avg/min)*100 <=86 Then%><IMG SRC="../images/dial-7.gif">
<% ELSEIF (avg/min)*100 <=99 Then%><IMG SRC="../images/dial-8.gif">
<% ELSEIF (avg/min)*100 =100 Then%><IMG SRC="../images/dial-9.gif">
<% ELSEIF (avg/min)*100 <=112 Then%><IMG SRC="../images/dial-10.gif">
<% ELSEIF (avg/min)*100 <=124 Then%><IMG SRC="../images/dial-11.gif">
<% ELSEIF (avg/min)*100 <=136 Then%><IMG SRC="../images/dial-12.gif">
<% ELSEIF (avg/min)*100 <=148 Then%><IMG SRC="../images/dial-13.gif">
<% ELSEIF (avg/min)*100 <=160 Then%><IMG SRC="../images/dial-14.gif">
<% ELSEIF (avg/min)*100 <=172 Then%><IMG SRC="../images/dial-15.gif">
<% ELSEIF (avg/min)*100 <=186 Then%><IMG SRC="../images/dial-16.gif">
<% ELSEIF (avg/min)*100 =>187 Then%><IMG SRC="../images/dial-17.gif">
<%END IF%></font></td><td><img src="../images/under-target.gif"><br><br><img src="../images/over-target.gif"></td>
</tr><tr><td></td><td valign="top" align="center"><font face="Arial" size="2">Actual: <%=avg%> <%=mintype%></font><hr></td><td></td></tr><% for j = s to lastfield
color = "#000000"
if int(v(j)) < min then color="#FF0000" %>

<% next %>
</tr>
<% rs.movenext
loop
rs.close
cn.close
set cn = nothing %>
</tbody>
</table>
<% end if %>
</div>
</form>
</div>
<!-- #include file="./../../common/includes/i_footer.asp" -->

View 5 Replies View Related

Data Won't Always Save In Upsized Access Application

Nov 20, 2007

I successfully upsized an Access database to SQL Server Express so that I have an Access frontend and a SQL Server Express backend. People started using this on an intranet, but right away they started complaining that sometimes their data wasn't saved. For example, they might have entered 8 records but when they went back to look at them only 4 were actually saved in the database. Any idea why this might be, or how I could trace the errors and find out?

Paul_in_Brunei

View 1 Replies View Related

Data Access Application Block For SQLClient

Jul 12, 2006

I download the DAAB CF version. However, most of them use SQLCEClient to connect to the database. Is there any DAAB that use SQLClient?
One workaround that I made is I replaced all SQLCEClient objects with the SQLClient objects. I only test one method "ExecuteDataset" and it works so far. However, my question is "does my workaround a good solution?"

Thanks,
Hendra

View 1 Replies View Related

Problem Unable To Access Sql 2005 Pipes Error On New Web Application

Nov 30, 2006

I have a site I created in .Net 2.0 the site is using sql server 2000 on the network. On the development machine the site is working as it should. I have also installed sqlexpress on the web server. I then push the site up to my server and I get the "unable to access sql 2005 pipes error". I installed vs2005 on the web server. when I run the app in vs2005 I don't get any errors and the application comes up. The app's connection string is placed in the web config file. I also changed the sqlexpress for local and remote logins.
What else could be the problem. I have never seen this before. And all the non DB sites work!
Enviroment:
Webserver Windows Server 2003, .Net 2.0 framework, iis6, sqlexpress, vs2005
Database SQL2003

View 2 Replies View Related

Poor Preformance Usinng Sql 2005 With Access 2003 Application

Jan 1, 2007

we have run access 2003 application using SQL 2005 server
and the data transfer rate is extreamly slow.
we are using ODBC connection
and the access apllication works very fast with SQL 2000.

we have the tested the comptabilty of the application to SQL 2005 with Microsoft wizard and it had no problems.
even when i run simple application on the sql 2005 server, it runs very slowly.

i am using the MDAC clients ODBC component and the SQL Native Clients one.
which eliminates the possibilty of network problem.

what could be the problem???

View 1 Replies View Related

I Am Accessing Data Using Data Access Pages In IIS 7 To SQL Server 2005 Authentication Is Failing

Feb 5, 2007

is there a step by step paper to get there? here is what i need to consider. I Iwill have many customers that will need their own set of records and access pages "branded for their company" each customer will have many clients. I am hosting this application on a windows 2003 server with SQL 2005 server enterprise.

I am using windows authentication, I have created a username in windows, then i added the windows user in SQL management studio in security, granted "DB Read" and "DB write" and again under the database security tab. still from the web authentication fails. i must be nissing a step or two?

I expect to set up a username for each database as i setup new customers.

View 1 Replies View Related

Data Access Application Block: Using In Class Library

Nov 16, 2007

I'm trying to use the Data Access Application block, and am having some issues with configuration. I am using it in a class library, and it seems that with v 3 you need to configure the DAAB first, making changes to the configuration file. However, in a class library, I do not seem to have the web.config or app.config file to change. So where do I need to store the configuration settings?
 Thanks,
Paul

View 3 Replies View Related

SQL Security :: How To Restrict Data File Access

Aug 23, 2015

We have a situation where we need to restrict access to a sql server data file. That is, to prevent users viewing any tables, stored procedures, etc, in sql server or another tool. We are providing a our database as part of an application install to a customer's site which will run isolated on the customers network. However the application will have sql server logins and the system must still be able to execute stored procedures.

The setup unfortunately cannot be changed and we are trying to think of best implementations for this. Our customers are also working with competitors so we are very conscious about exposing our data structures to anyone outside of our company, hence trying to restrict access. If deployed to a sql instance on the customer site then they will have database administrator accounts on the server.

View 8 Replies View Related

Memo Data Type Import Error While Importing Data From Access File Into SQl Server 2005

Sep 10, 2007

I have one column in SQL Server 2005 of data type VARCHAR(4000).

I have imported sql Server 2005 database data into one mdb file.After importing a data into the mdb file, above column
data type converted into the memo type in the Access database.

now when I am trying to import a data from this MS Access File(db1.mdb) into the another SQL Server 2005 database, got the error of Unicode Converting a memo data type conversion in Export/Import data wizard.

Could you please let me know what is the reason?

I know that memo data type does not supported into the SQl Server 2005.

I am with SQL Server 2005 Standard Edition with SP2.

Please help me to understans this issue correctly?

View 4 Replies View Related

Data Access :: Login Failed For User When Run Application In Network

Jun 9, 2015

When i wanna run Application in other computers in network. The following error occurs.

error : System.Data.SqlClient.SqlException: Login failed for user 'Suren-PCGuest'.ConnectionStr = "Data Source=SUREN-PCMSSQLSERVER,1433;Initial Catalog=WorkFlow;Integrated Security=True";

View 5 Replies View Related

Sql Server To Access An Application In MS Access

Dec 6, 2000

Hi,
Can anyone tell me how i can access an application or open tables in MS sql server that are in MS Access. Its urgent and any help will be appriaciated.

View 2 Replies View Related

Using DAO To Access Binary Data In Sql Server 2005?

Aug 29, 2006

(Appologies if this group isn't the best place for this post)Is it possible to use DAO 3.6 to access binary data (varbinary(max)) inSql Server 2005? I have images and sound in a Sql 2005 DB that I needto retrieve (and write) with DAO (ADO and ADO.Net are not options asthis is legacy code that can't be changed).Thx,Marcus

View 2 Replies View Related

Very Slow Data Access On SQL Server 2005?

Jul 5, 2006

Hi

Here is the brief to my problemWe had our database on SQL Server 2000 and Windows 2000.This machine
had 2gb of RAM and dual Penitum 3 processors and about 25-30 users were
connected all the time. The size of database is around 2 gb. Even on this setup
rate of data retrival was good, never had any issues. We moved to SQL Server 2005 and Windows 2003. This machines has
2 Pentium Xeon 3.4 processors and 2 stick of KINGSTON 1024 MB 333
MHZ DDR DIMM ECC CL2.5 DUAL RANK X4 INTEL. The rate of data
retrival is awful and its very slow. It using about 1.7 to 1.9 gb of RAM all the
time. Page File usage is about 2.07 gb and Virtual Usage is about 1.7gb.I dont quiet understand why is it so slow to get data. We use bespoke software,
so nothing has changed there. Hardware specification of our server is far more better then the recommended
system requirement for SQL Server 2005.Am i missing something out or i havent set up the SQL Server properly? Any help would really be appreciated.Mits

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved