SQL Server 2005 Start Jobs Window And Job Activity Monitor Do Not Show Job Status Correcly
Mar 14, 2007
Hi,
We have development and user acceptance (UA) servers. When I start a job on the development server, on the management studio, Start Jobs window and Job activity windows indicate "Executing" until the end of the job and finish with "success" or "failure"
But on the UA server, second after I start a job, Start Jobs window comes up with "success" or failure" and Job activity monitor says "idle" but Job continues to log without any error message and updates the tables. So these two windows are not reliable at all. I have to add that I have only job operator rights on the UA server.
Does anybody know what the reason is ?
Thanks
View 5 Replies
ADVERTISEMENT
Apr 14, 2015
Is there anywhere in the SSMS to see the start time of a currently running job, currently running it's first step, without needing to run a query?
If not, why would Microsoft decide to not show it in the job activity monitor?
SSMS = Sql Server Management Studio
View 1 Replies
View Related
Sep 27, 2006
For SQL Server 2000 we have a user login mapped to msdb with database role membership of db_datareader and public checked. This seems to allow the developers to view the Management Activity monitor. For SQL Server 2005 the same mapping is in place but the developers cannot view the Management Activity monitor. Developers are NOT granted the sysadmin role, and should not have that role.
What permissions need to be set for SQL Server 2005 to allow users to view the Management Activity monitor? They should not be allowed to take actions on the activities.
View 13 Replies
View Related
Sep 14, 2007
We have our SQL Server 2005 hosted at a datacenter and have only SS Management Studio access (no term serv, no event log, etc.). Also, our hosting company has disabled the Database Mail feature. We have over 60 jobs running on a minute/hourly/daily basis that are critical for our business. It is super important for us to know if and when a job failed.
Given this scenario, how do you suggest we implement monitoring/notification of failed jobs?
View 10 Replies
View Related
Aug 19, 2015
If I'm on a remote machine, meaning a computer not in the WSFC cluster, and I open SSMS 2014, point it to a SQL Instance, and open activity monitor:
1. I get all the panes and charts except % Processor Time.
2. Then, if I authenticate to the cluster's domain by mapping a drive with valid domain credentials, I'm free to put performance counters in the Perfmon - - - but SQL Activity Monitor shuts down with“The Activity Monitor is unable to execute queries against server SQL-V01INSTANCE1..Activity monitor for this instance will be placed into a paused state.Use the context menu in the overview pane to resume the activity monitor.
Additional information: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))(Mscorlib)”
3. Of course, the Activity monitor can't be resumed via the context menu. Removing counters and closing the perfmon do not work. I dropped the mapped drive and rebooted the machine. That brought back 95% of the information in the Activity monitor.
4. Further experimentation showed that any mapping of drive shares present on the SQL Server to the computer running SSMS cut off functionality of the 'overview' pane in the remote machine's SQL Activity monitor -- the monitor that had been trying to watch the server offering the shares.
View 4 Replies
View Related
Apr 19, 2007
I'm hoping that someone has experienced this problem before and knows how to get round it.
The problem we are having is that we have a job that is scheduled to run at 4:00 am each morning, for the past 6 weeks it has done this with no problem. However, this morning it failed. we know it failed because it didn't produce the results it was supposed to. However the monitor said that the job had completed successfully. On examining the history of the job we found that the job was still running!!! When we tried to stop the job by right clicking and selecting the appropriate action. The action available to us was to start the job.
After arguing for a bit we decided to try and run the job again. We did this and found that the job running in the history screen terminated with an error and than ran and completed successfully.
Confused? So are we any ideas or solutions gratefully received
View 3 Replies
View Related
May 28, 2015
Is there a way to permanently change the order of the columns in Job Activity Monitor?
I'd like to move Duration to the right of Step Name, but this only lasts so long as I have JAM open. Once I close it and re-open, JAM goes back to its default column order. Google gives me nothing but the temporary "drag and drop" method that I already know about.
View 2 Replies
View Related
Aug 17, 2005
Hello guys,I've one query regarding accessing SQL Server. I want to use SQL Server jobs scheduling functionality. Is it possible to open SQL Server's jobs window from VB.NET? (Server -> Management -> Jobs) Pls. help me to solve this query. Thanks in advance. Waiting for yr reply.
View 7 Replies
View Related
Apr 10, 2008
Is there a way to allow a user to run activity monitor without making that user system admin
View 9 Replies
View Related
Apr 23, 2008
Hi experts,
I just want to know how can i kill all the processes of a database
if the database have more than 100 connections.This is for the purpose of restoring a database.
RKNAIR
View 3 Replies
View Related
Apr 10, 2007
Is there a way to give access to non-admins on ACTIVITY MONITOR?
------------------------
I think, therefore I am - Rene Descartes
View 2 Replies
View Related
Sep 10, 2007
Hi,
I have a problem with Job Activity Monitor.
I have a SSIS which copies data from a table to a flat file. The connection string of this file is variable and the file is reused if not exists and is created if exists.
When I run the SSIS manually from my microsoft visual studio it works properly. However, when I run this SSIS from the Job Activity Monitor, I get the following error:
Message
Executed as user: REDCAMadminsql2k5. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:41:10 AM Error: 2007-09-10 08:48:04.99 Code: 0xC020200E Source: Crear Historico Historico [1] Description: Cannot open the datafile "\srvnfileHISTORICOSCAJEROSOFI3210C01OFI3210C01_2007-7X.txt". End Error Error: 2007-09-10 08:48:04.99 Code: 0xC004701A Source: Crear Historico DTS.Pipeline Description: component "Historico" (1) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 8:41:10 AM Finished: 8:48:53 AM Elapsed: 462.234 seconds. The package execution failed. The step failed.
Any idea?
Thanks.
View 3 Replies
View Related
Sep 24, 1999
Hi,
On sql server 6.5 running on a win/nt platform my Current Activity window comes up blank when I click on it. Everything else seems to be working fine. This is a new problem, it just stopped reporting any info when I click on it.
Any suggestions would be greatly appreciated.
Thanks,
Jerry
View 2 Replies
View Related
Oct 5, 2007
Hi All,
I want to analyze server (SQL 2005) activity at a specific time in the past. Unfortunately, there doesn't seem to be a log file reflecting the information in Activity Monitor. Knowing that the sysprocesses and syslocks tables feed Activity Monitor, I thought about doing a log analysis on the master transaction log, but I'm not sure that's possible.
Is there a (different) way to achieve this?
Or is there a better approach to identifying processes that cause performance bottleneck/deadlocks?
Any input would be appreciated.
Ken
View 4 Replies
View Related
Feb 6, 2007
Hi,
I've been using the Job Activity Monitor quite a lot and last night I installed Service Pack 1 for SQL Server 2005. I've noticed now that I only have a "Start Job at Step" option when I right-click a job. Whereas I used to have just Start Job or both Start Job and Start Job at Step options.
The problem is that Starting a Job at a Step, produces a modal dialog box which prevents further access to Job Activity Monitor until the job is complete.
Does anyone have any comments regarding this?
Thanks in advance,
Richard.
View 1 Replies
View Related
Apr 4, 2007
Hi!
I want to extract the same information as the Activity Monitor does with SQL in SQL Server 2000.
Have tried to use sp_who2 but I miss some important columns.
How do I do?
Thanks!
View 2 Replies
View Related
Oct 25, 2007
If you are in SQL Server Management console, go to Job Activity Monitor, there is an option 'View Refresh Settings'. You have to enable/check the Auto Refresh option here every time. Is it possible to keep this Auto Refresh enabled?
Thanks!
Olaf
View 6 Replies
View Related
Oct 15, 2014
I have a SSIS package set up that will transfer a file from a location on the network drive and transfer it over FTP to another location.
When I manually run the package, the file is transfer with no errors. But when the job is automated (via Job Activity Monitor) the transfer fails?
I have set the ProtectionLevel of the package to "EncryptSensitiveWithUserKey" and also converted the package to a Development Model. The settings for the FTP is saved within the package.
What am I missing? below is the error message
Executed as user: UHBInfoSQLAgent. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 08:43:02 Error: 2014-10-13 08:43:03.72
Code: 0xC001405F Source: ResearchWebsite
[Code] .....
View 2 Replies
View Related
Feb 22, 2015
We have killed a job which is now in KILLEDROLL BACK state. Job activity monitor is not showing any running jobs but I can see the SPID of that job. When tried to kill again its giving the message ‘command completed successfully‘, not able to get the percentage or time for the roll back to complete.
Another DBA tried to create a snapshot and it was stuck and I believe it was because of this ROLLBACK as both were using same Database.
View 5 Replies
View Related
Jun 4, 2007
All;
We have a Windows App and Web App that share business objects which points to a single database. When a Windows user logs in, an average of 50 processes are created in the first few seconds and never go away. The details window is blank and they all remain sleeping from that point on.
I have stepped through the code to see if there is anything odd going on but most of the processes are created when validating the number of parameters the stored procedure has or the length of the stored procedure name. This translates to 1000-1500 processes on average.
Is this normal? Will it hurt performance? Is there a way to remove them?
View 1 Replies
View Related
Apr 23, 2013
When I try to open Activity Monitor from SSMS I receive the message "Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (mscorlib)". - more details below.
I have a SQL Server 2012 Enterprise SP1 installed in an Active/Passive cluster configuration on Windows 2008 R2 Enterprise SP1. The problem happens using sa and a domain administrator.
------- more details -------
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (mscorlib)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
[Code] .....
View 5 Replies
View Related
Jan 10, 2015
I have a windows 8 pc that I just got and installed sqlexpress 2014. My buddy haw windows 7 and installed sqlexpress on his pc. We create a db on his pc, did a backup, copied the backup to my pc. In ssms I right click on "database" > restore database. click device and the button to find my file. I navigate to the folder where the file shows in file explorer but the .bak file does not show in ssms to restore from. This is probably a windows thing but I have don't know what to look at.
View 4 Replies
View Related
May 18, 2007
The activity monitor is not showing entries for hosts which connect via sql logins (odbc), is this normal? Where can I find a list of protocols in which the hostname/ip can be picked up. We're on SQL 2005 SP1/Build 2153
Thanks
View 2 Replies
View Related
Sep 26, 2007
Hi
we have one 'application'-user in sysusers that makes the connect to SqlServer for all users, for example:
Application Login-User: Thomas
DB-Connect-User: AppUser
With this solution, in Activity-Monitor or with sp_who I don't know, what is the real name of the connected user.
Any possibility to change the login-information after the connect, so that i can see 'Thomas' in Activity-Monitor or with sp_who?
Thanks for your help.
Thomas
View 4 Replies
View Related
Mar 30, 2007
1) RS Start in Window Severvices
2) RS Start in Configration
1) and 2) Is Same?
I think that It looks like same Operation.
View 1 Replies
View Related
May 16, 2007
Please forgive the simplicity of this question - I am not the dba type. When I connect to a server and look at my connection attributes in activity monitor, the user column shows the correct information for my domainusername. When I run a certain stored procedure in that connection, the domainusername changes to another person. We are not using execute as, setuser, or anything special to explicitly change the user. The stored procedure is in a schema that is owned by dbo (principal_id = 1 - I verified by checking sys.database_principals.)
Does anyone have any suggestions?
Thanks in advance,
John Hennesey
View 4 Replies
View Related
Jan 30, 2007
I have setup transactional replication everything on one box. later(two or three weeks later), Replication monitor is show red X Under my publishers (publications is disconnected). this is SQL2005.
Everyone known how to fix this problem?
Thanks,
Frank
View 1 Replies
View Related
Apr 11, 2007
Hi,
This is the situation:
There are around 300 jobs on the server. The server shutsdown abnormally and is not functional for let's say 2 hours. After the server is back on, I need to find what jobs had to start during the server was down.
Is there a way to get this list? I tried to write an SQL script that tells me the needed information, but the job schedule sheme is so complex that it would take too much time in developing such SQL script. Maybe anybody has a better solution, or has already made a similar script?
ThankYou.
View 2 Replies
View Related
Dec 7, 2006
To monitor the status of replication in SQL 2000 we insert the resuts of sp_MShelp_replication_status into a temp table and review the status. In SQL 2005 this stored procedure has changed and now does it's own insert into execute command. Since insert execute commands can not be nested we must find another way to programically monitor replication using TSQL. We could call sys.sp_replmonitorhelppublisherhelper but we can't seem to find it in the distribution database. It must be hidden somehow. Any ideas?
Thanks,
Danny
View 6 Replies
View Related
Apr 3, 2008
Hi ..
i have a task to monitor the sql jobs..
i wish to do with this with C# or asp.net application.
please help me to finish this..
View 7 Replies
View Related
Oct 10, 2007
Hi Guys,
I'm Hoping some one could help me out, I'm in need of creating a web interface to monitor scheduled SQL Jobs, both on sql 2000 & 2005.
I'm new to asp, Can anyone point me in the right direction.Really appreciate it.
Regards
View 3 Replies
View Related
Jul 13, 2015
I'm trying to build a report to show activity for reservations placed and satisfied by month by branch.
The report has a parameter for the item category and the dataset has the fields
MonthCategory BranchReservations placedReservations satisfied
On the front sheet I've created system wide figures with a two columns per month and a matrix which is also broken down by category (e.g. child fiction, child non fiction, adult fiction, adult non fiction) which has row and column totals.
I want to have a page like this for each branch in the system.
View 4 Replies
View Related
May 24, 2015
I have a table called 'AssetPlacements' that shows the dates when certain objects (AssID) were placed at certain locations (LocID).
ID AssID LocID PlacementDate
1112015-05-01
2122015-05-06
3132015-05-09
4212015-05-03
5222015-05-07
6232015-05-11
I'd like to show the assets with a start date and end date for the placement of the asset.
The start date to be the placement date and the end date to be the next placement date of the asset.
Where there is no next placement date to then show the end date as the current date, so hopefully the table will show as the following.
ID AssID LocID StartDate EndDate
1112015-05-01 2015-05-06
2122015-05-06 2015-05-09
3132015-05-09 [GetDate()]
4212015-05-03 2015-05-07
5222015-05-07 2015-05-11
6232015-05-11 [GetDate()
I'm guessing some sort of recursion is required here to produce this.
View 7 Replies
View Related
