SQL Server 2005 Std Hogging Way Too Much Memory
Sep 14, 2007
Hi:
I'm running Windows Small Business Server 2003 Premium R2. I installed SQL Server 2005 Standard Edition on this PC. I'm using Std Edition instead of the Workgroup Edition that comes with SBS since I like the additional features in the Std Edition.
I'm a kind of a newbie to Windows Server administration and SQL Server administration although I've written lots of SQL queries, stored procedures, etc.
I have 2GB of RAM on this PC. When I looked in Task Manager, I saw that SQL Server was using somewhere over 1GB of RAM. So, I opened up SQL Management Studio, right clicked on the server node, clicked to get to the memory configuration page and saw that SQL Server was set to use all 2GB of RAM on the PC. I changed that to 500MB(500000000, or 476MB) and decided to reboot the server. When the server came back up, I forgot to check SQL Server's new RAM usage. The server ran without interruption for over 24 hours. Now, when I checked SQL Server's memory usage in Task Manager, I can see it's using over 750MB of RAM.
How do I fix this?
I have Exchange Server 2003 running on this PC as well.
Thx.
View 9 Replies
ADVERTISEMENT
Sep 25, 2006
Hi,
We have recently tested upgrading our web service from sql 2000 to 2005 sp1. The upgrade went smoothly enough, however we now have the problem of the sqlserver.exe process taking 90-100 % of the processors time, but using only 100 MB of memory.
We have 6GB available and we are running the enterprise editions of Windows 2003 and SQL 2005.
Machine specs,
DL380 G2, 2 X 2.8 Ghz Zeon, 6GB ram, Raid 5, database partition of 140 GB, Log partition of 35 GB.
Db is 25 GB, Log is 12 GB. Largest table has 32 million rows.
Any help would be greatly appreciated.
Rob
View 1 Replies
View Related
Jul 7, 1999
I've just had a call saying that their SQL Server v7 box on a Compaq 7000 that has been installed for about 6 months is now running slowly,
a look on the CPU shows that SQL server is grabbing 50% upwards of the CPUs (dual processor) even when the front end application is not running
, is there anything that I should be checking
Thanks
Richard
View 1 Replies
View Related
Sep 16, 2007
Here'a a break down of what I've done so far.
* Windows 2003 32bit Enterprise with 10gb RAM
* SQL 2005 32bit Enterprise
* boot.ini - have added /3GB /PAE switches
* Confirmed which account SQL Server is running under and added that account to Local Policies/User Rights Assignment/Lock pages in memory
* Enabled AWE in SQL SERVER
* set minimum and maximum server memory to 9gb
* Rebooted.
Task manager says the following:
sqlservr.exe - 95MB usage * I know this is normal when using AWE right?
The actual physical memory used is 3.13GB and never goes higher. So this leads to believe that SQL is utilizing 3GB because of the /3GB switch, but it's not using the rest like it should be. I tried it without the /3GB switch and it only went up to about 2.1GB usage.
I've turned on performance monitor and SQL server target memory says 8.65 GB while the Total Server Memory says 2.45GB.
I've run:
EXEC sp_configure 'show advanced options'
RECONFIGURE
GO
EXEC sp_configure 'awe enabled'
RECONFIGURE
GO
And it confirms that the running value for both is 1
Please help.
View 20 Replies
View Related
Mar 26, 2007
Hi
I would like to know how much of memory is taken by sql server 2005 entprise edition 64 bit during sql server startup in default configuration.....(4GB RAM being used).
i also want to know about montioring the performance of sql server 2005.Should i continue to use performance monitor (perfmon) or is there any new feature in slq server 2005 which provides performance monitoring.
Thanks in advance
View 2 Replies
View Related
Dec 5, 2006
Using SQL Server 2000, SP1 with 4Gb max memory allocated to the instance. The problem is that one large table is hogging cache and it's dragging down overall query performance. I realise it's in cache because it's getting queried regulary. However, I need to know what options exist to get around this problem - to free up some cache for other tables and indexes? Of course, there is the option of archiving off some the data in the table to reduce its size and we will look at doing this although it will not be as easy as it sounds.
I can imagine that there must be many databases that have at least one large table that is getting hit regularly and is left in cache more-or-less permanently. Therefore, I can't believe I have an usual problem.
Thanks in advance,
Zarty
View 2 Replies
View Related
Dec 11, 2007
Hi all,
I needed to load some tables in memory on startup because of performance reasons.
I'm using "select * from <table>", but there are few questions:
1. How to pin already selected data in memory ? (DBCC PINTABLE doesn't work for 2005)
2. How to put index data in memory ? (do you read document(s) for advance memory management - index data caching ?)
3. How to pin index data in memory ? (otherwise sound very bad - table data in fast memory, index data - in slow disks)
Thanks in advance:
Siol En
View 6 Replies
View Related
Dec 11, 2007
Hi all,
I needed to load some tables in memory on startup because of performance reasons.
I'm using "select * from <table>", but there are few questions:
1. How to pin already selected data in memory ? (DBCC PINTABLE doesn't work for 2005)
2. How to put index data in memory ? (do you read document(s) for advance memory management - index data caching ?)
3. How to pin index data in memory ? (otherwise sound very bad - table data in fast memory, index data - in slow disks)
Thanks in advance:
Siol En
View 3 Replies
View Related
Sep 18, 2007
We have an application that we currently run on SQL Server 2000 that works by creating a DTS package that it then executes.
Due to performance reasons, we have been considering switching to 2005, for a few reasons. Can anyone confirm clarify the following?
1) SQL Server 2000 caps RAM usage at 2GB, whereas SQL Server 2005 is only limited by the OS - RAM usage is a big current issue for us, so if upgrading to 2005 would solve this it would help a lot. Can anyone confirm my understanding of this?
2) Would using the legacy DTS in SQL Server 2005 take advantage of this RAM difference, or is it running on the old 2000 engine and only able to use the 2GB?
Thanks for any help.
View 4 Replies
View Related
Feb 25, 2005
I have a test database for the end users to test their select queries for reports.
One of my users is writing queries that cause locking in the database. I killed the process last evening and they are in Killed/Rollback status but are still hogging 90% of the CPU resources for the past 12 hrs. I tried killing them several times but no go.
I know that the best way to clear of these processes is by restarting SQL Server. If that is not an option is there is any other way we can clean these processes?
Also the user running these queries has a read only and create view access to the database. From my experience processes that go into Kill/Rollback state after you kill them are processes associated with some update transaction. Since the user as far as i know is running Select commands would an infinite loop cause this ?
thanks
nina
View 8 Replies
View Related
Apr 20, 2007
My server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
View 8 Replies
View Related
Aug 13, 2007
A query was taking 20 seconds and consuming 70% CPU takes only 1 second after setting Maximum Memory property to 2048 MB - why?
Server:
OS Microsoft(R) Windows(R) Server 2003, Enterprise Edition
Version5.2.3790 Service Pack 1 Build 3790
8 GB memory
Two Dual-core AMD Opteron 285 2.6GHz Processors
Server is not configured for AWE
Fiber channel connection to EMC Clarion - two LUNs - one for MDF, one for LDF
SQL 2005
SQL 2005 32 bit Standard Edition - SP1 (version 9.0.2047)
Three instances installed on server - only one instance in use
Binaries and system databases on local mirrored disk
Database file (MDF) on one EMC LUN - dedicated physical drives
Log file (LDF) on one EMC LUN - dedicated physical drives
Query in question:
SELECT TOP 10 Address.Address1, Address.Address2, Address.City, Address.County, Address.State, Address.ZIPCode, Address.Country, Client.Name,
Quote.Deleted, Client.PrimaryContact, Client.DBA, Client.Type, Quote.Status, Quote.LOB, Client.ClientID, Quote.QuoteID, Quote.PolicyNumber,
Quote.EffectiveDate, Quote.ExpirationDate, Quote.Description, Quote.Description2, Quote.DateModified, Quote.DateAccessed, Quote.CurrentPremium,
Quote.TransactionDate, Quote.CreationDate, Quote.Producer FROM ((Client INNER JOIN Address ON Client.ClientID = Address.ClientID) INNER JOIN Quote ON
Client.ClientID = Quote.ClientID) WHERE (Quote.Deleted = 0) AND ((Address.AddressType)='Mailing') ORDER BY Client.Name
Address table - 161,075 rows
Client table - 161,634 rows
Quote table - 59,145 rows
With default maximum memory setting (2,147,483,647 MB) - query runs in 20 seconds and consumes over 70 % of the CPU.
After changing maximum memory setting to 2048 MB, query runs in less than 1 second.
Question is:
What is the best practice for setting the minimum and maximum memory settings for SQL 2005?
What can be monitored to identify the cause of these type of issues - using profiler, PerfMon, other tool?
Thanks
View 2 Replies
View Related
Jul 23, 2005
I was browsing Microsoft's SQL Server site, looking forsome details about SQL Server 2005. Didn't find whatI was looking for...I'm thinking about moving an existing SQL Server 2000workload to a new box, using SQL Server 2005, andmaybe the 64-bit version.My questions are:1. What is the current target date for release of SQL Server 2005?Will 64-bit ship when 32-bit ships?2. Will 64-bit SQL Server 2005 require a special versionof Windows Server 2003 (e.g. Windows Server 2003 Enterprise x64)?Will it work with both Intel and AMD processors?3. How many CPUs, and how much memory, will be supported bySQL Server 2005, 32-bit and 64-bit, on each OS that can runSQL Server 2005.I'm looking for a chart here, something like the chart onpage 117 of Kalen Delaney's "Inside SQL Server 2000" book.SQL Server 2005 SQL Server 2005Feature Enterprise 32-bit Enterprise 64-bit------------------- ----------------- -----------------CPUs supportedWin Srvr 2003:Win Srvr 2003 Adv:Win Srvr 2003 Ent x64:Physical memorysupportedWin Srvr 2003:Win Srvr 2003 Adv:Win Srvr 2003 Ent x64:Has Microsoft published this info, and I just can find it?
View 1 Replies
View Related
Oct 26, 2007
running Sql Server 2005 SP2 on Windows 2003 Server SP1 with 2GB RAM. After start-up, the sqlservr.exe does only take up around 100 MB of RAM, and it stays roughly there even if the DB is used heavily. This leads to very poor performance, even timeouts on simple querys.
In the task manager, I see that of the 2 GB of RAM, more than 1 GB is still available. I don't understand why SQL Server won't take it?
As a test, I configured the min and max amount of RAM SQL Server should used both to 1024 MB and restarted the service - but it is still the same picture. It won't take more than around 100 MB.
The server has just been restarted, but the problem remains.
BTW there is also an instance of SQL 2000 on the same machine. It shows the same behaviour - I even checked the "reserve phyiscal memory" checkbox there, but it stays on a very low number (50 MB) and doesn't adhere to the supposed size.
thanks and best regards,
- Urs
View 3 Replies
View Related
Aug 14, 2007
we wonder about the tradeoffs of t-sql vs clr in sql server 2005 especially from a memory perspective. Is there documentation available on this subject?
View 8 Replies
View Related
Apr 2, 2007
I have a Windows 2003 Server running SQL 2005. The server has 32 GB of memory and I have enabled AWE in SQL. I have also configured the min and max SQL memory as 1 GB and 28 GB, respectively. However, this server currently has very low activity so I'm not sure whether my AWE-related changes worked. SQLSERVR.EXE process takes up about 100 MB of memory. Is there any tool or scripts that I can use to memory stress SQL to confirm that AWE is really in effect ?
View 1 Replies
View Related
Nov 9, 2007
Hi,
I'm having trouble finding the optimum memory settings for SQL Server 2005. I have 4 instances running on a macine with 8 dual-core processors and 18GB of RAM. I have tried the following memory settings so far:
No maximum - one instance used about 12GB of RAM so then the others struggled
Maximum of 4GB each (2GB left for Windows) - meant that 3 instances could be using 1GB each and then another at 4GB and needing more whilst 9GB sat unused.
Minimum of 2GB each - one instance would use up 10GB and then never give any back to the other instances.
I also find that setting a maximum then just causes a high amount of paging. What I would like to do is have each instance use a minimum amount, say 1GB, and then have each instance use a maximum of 13GB (3GB for other 3 instances running at a minimum level and 2GB for Windows). This 13GB should then be released and allocated to another instance when necessary, assuming it is no longer all being used. I do not want paging to occur if an instance reaches 13GB.
How do I go about configuring SQL Server to behave like this? Is it possible?
Thanks.
View 1 Replies
View Related
Jan 2, 2007
Hi forum readers,
we are working on a release 2.0 mobile solution right now. In our version 1.0 we did not have to worry about memory issues as our application was the only application running on our target devices (e.g. T-Mobile MDA Compact II Pocket PCs, WM2005).
Now we need to share the available memory with others. As our application relies on its SQL Server 2005 Mobile Edition database we are wondering about memory usage of that server.
We know that a Pocket PC divides its memory into Storage and Program. If our application uses a 5 MB database and 1.5 MB for DLLs and it's exe-file. These files reside in the storage space when not loaded. When the application starts up it is loaded in the program memory. What happens to the 5 MB database file? Is is loaded into Program memory as well? Are only portions of that file loaded? Or is nothing loaded at all?
Does anyone have a deeper insight into that server an can answer my questions.
Best regards,
Tobias
View 3 Replies
View Related
Feb 11, 2007
We have only a small busines and haven't got too much experience with servers and now have a proliant server coming in with SBS 2003 R2 Premium with the 4 GB max memory that SBS 2003 can handle according to the specs.
We weren't planning on using the SQL 2005 worlgroup edition up till now, but now we might. According to the specs of SQL server 2005 workgroup edition however, it has a max RAM of 3GB!
Is this going to be a problem and should we keep using our previous DB, or can we migrate toward SQL server with the 4 GB of RAM?
View 2 Replies
View Related
Aug 2, 2006
Hi
I did a load testing and found the following observations:
1. The Memory:Pages/sec was crossing the limit beyond 20.
2. The Target Server Memory was always greater than Total Server Memory
Seeing the above data it seems to be memory pressure. But I found that AvailableMemory was always above 200 MB. Also Buffer Cache HitRatio was close to 99.99. What could be the reason for the above behavior?
View 1 Replies
View Related
Aug 3, 2007
Hi,
I am testing SQL 2005 Standard (32 bit) on a Windows 2003 Server 64 bit with 8GB of RAM? Should I enable the AWP Setting or not and should I change the maximum server memory (currently saying 2GB)?
Thanks!
Tom
View 1 Replies
View Related
Nov 9, 2007
We are looking for some guidance with an issue we have picked up with our implementation of Service Broker here on the ABSA Capital project and I am hoping you can help or point us in the direction of someone.
The architecture we have implemented for service broker is to make use of an Activation stored procedure on two queues (1 SP per queue) to process the messages received. What we have found is that the activation stored procedure runs on a background session and its CPU time and memory just grows to the point where it brought one of our UAT servers to a grinding halt.
Is there anyway we can reduce the memory consumption of the activation stored procedure or is this one of those things that still need to be ironed out in Service Broker?
View 6 Replies
View Related
Aug 22, 2007
sql server 2000 is running on windows server 2003 ... 4gb of memory on server .... 2003 was allocated 2.3gb nd sql server was allocated (and using all of it) 1.6gb for total of approx 4gb based on idera monitor software ... all memory allocated betweeen the OS and sql server .... then 4 more gb of memory added for total now of 8g ... now idera monitor shows 1.7gb for OS and 1.0 gb for sql server ..... 'system' info shows 8gb memory with PAE ... so I assume that the full 8gb can now be addressed .... why are less resources being used now with more total memory .... especially sql server ..... i thought about specifying a minimum memmry for sql server but i amnot convinced that would even work since it seems that this 1gb limit is artificial .... it it used 1.6 gb before why would it not use at least that much now ??
thank you
View 4 Replies
View Related
Jan 21, 2008
Hi I am using SQL 2005 64 Enterprise edition with 30GB memory.
I have allowed SQL to use min 0 memory and maximum 20GB but sql is only showing it can use 100MB of memory
Anyone know the answer
Ap
View 7 Replies
View Related
Dec 10, 2007
My organization is currently migrating about 35 databases from SQL 2000 to SQL 2005. Most of the databases are small with the largest being about 6gb. These databases are not very transaction intensive. We are about half way through as we started the project a year ago. We purchased new hardware for this SQL 2005 so it is a side-by-side migration and it has been going well so far. I made one oversight which I think will come back to haunt us down the line. I installed Windows Server 2003 Standard R2 Edition and of course now I am considering putting more RAM in the server. We have 4 GB of RAM in the server and of course Standard Edition will not address more 4GB of physical ram. I have not seen any memory pressure yet but as databases are migrated over the amount of physical RAM drops. My buffer hit cahce ratio and page life expectancy performance counters are fine so far. The server is a brand new HP DL 380 G5 with with tons of disk and processing power, but only 4GB of RAM. I can't migrate to another server with more ram obviously.
1. What would you do in a situation like this?
2. I could do an in-place upgrade to Windows Server 2003 Enterprise R2. Has anyone attempted an in-place upgrade? I have no applications
on this server, just SQL 2005 Standard.
3. Would the /3gb switch be an option? I have heard mixed reviews on this one.
As far as database optimization, %75 of the databases are third party so we have little flexibility in tuning them or redesigning
tables.
Thanks,
Alex
View 2 Replies
View Related
Nov 14, 2007
We have been using SQL 2005 for quite sometime however recently I have been seeing memory issues. SQL will grow to use the maximum available! I have set min 1024MB and max to 15360MB leaving approx 5GB for OS.
Windows 2003 64 / SQL2005 64
Lock pages to memory - enabled
Min and Max - 1024, 15360
AWE not checked
We have recently added link server using OLEDB DB2 provider. Could this be the issue?
View 8 Replies
View Related
Jun 8, 2007
Is AWE enabled on SQL 2005 Standard? We currently have it setup using "locked pages in memory" for a domain account and haven't noticed any performance problems.
This article however states that only the SQL2005 Enterprise Edn supports "locked pages in memory". Can anyone confirm this?
http://support.microsoft.com/kb/918483
If I'm mistaken, how should the memory options be set for a server with 8gb ram running on SQL 2005 Standard which runs on Win2003 Enterprise? Should the min and max memory be set or left alone as default?
View 5 Replies
View Related
Dec 4, 2007
Hello
We have a problem with MS SQL 2005 Standard on a Windows 2003 x64 Box.
Server MS 2003 Server x64 R2
Quad Core 2.13GHz
Memory: 12 GB
MS Sql 2005 Standard, Sp2
The Sql process uses only 80MB of RAM (from 8 GB) so this machine is very slow. We set the min and max Memory in SQL without success. SQL ist very slow. Has anyone here some hint's to solve this problem? Thank'.
rainbow1
View 5 Replies
View Related
Nov 13, 2006
If I install SQL 2005 Standard on Windows 2003 Standard, is SQL limited to 4 gigs of physical RAM?
I'm planning a new system that will run SQL 2005 Standard edition on a Windows 2003 Standard platform. The spec calls for 8 GB of RAM. My experience would lead me to suspect I need to install Windows 2003 Enterprise to take advantage of all the installed memory.
View 3 Replies
View Related
Jan 25, 2008
OVERVIEW
I run a MS SQL DB and have 7GB of RAM allocated to it to use. My DB size is around 30GB. I have about 30-40 users at any given time accessing this DB, and on any given moment we may have 2-3 queries being processed at the exact same time, but not really a high rate of usage.
The SQL is running on a 2 - Dual Core Xeon 2.8Ghz processor server in RAID 1+0. The average CPU usage is around 8-15% at most times, spikes to 60-70% sometimes then drops back down.
QUESTION
Why or what would cause SQL to show in my Task Manager as using 7GB of RAM constantly? When I restart SQL, system RAM drops to 1.7GB and holds. As traffic increases, as queries begin to be processed in SQL the RAM rises till it reaches the 7GB limit I set. Before it reaches this limit, the ASPX pages run smooth as silk. Once it reaches this 7GB limit they begin to crawl. A process that would take 2-6 seconds, now takes 30-60 seconds.
I know a couple years back I ran into this and it was because processes were not being closed and SQL was holding them in RAM, but I have been assured this is not the case now. I was told that because my DB is 30GB total (MANY tables, most are hardly ever accessed, and the bulk of the data is hardly accessed) that it is common for SQL to use and hold on to 7GB of data - is this true?
What would cause SQL to hold 7GB and slow way down? IS there a KB article that could help me understand this?
Thanks for your help.
View 2 Replies
View Related
Apr 17, 2008
So I'm in the middle of building SQL Server 2005 on my new cluster hardware. I've got all the goodies this time around -4x PowerEdge 68004x dual core x64 procs in each box32GB ram in each boxWindows Server 2k3 R2 Enterprise x64 SP2SQL 2005 Enterprise x64 SP2Active Active Active Passive cluster (4 boxes, 3 instances)dedicated data, log, and tempDB 4Gb 15k fiber channel SAN Volumes for each instanceNow, this is the first x64 box I've configured, so I'm looking for some optimization tips for a couple things.First one's memory. On our 32bit systems, I always added the /PAE switch to the boot.ini file and enable AWE in SQL Server. From what I'm reading, that's no longer needed with the enhanced memory addressing. Is that the case? Is there an MS best practices KB doc in regards to configuration? I can't find one.Also, should I set anything special pagefile-wise? I know the old mantra is 1.5x system memory, but that would create a 48GB page file. Our current cluster has 6GB of ram dedicated to each instance (2k) and Perfmon tells me it's barely touching the pagefile. I'm thinking of just leaving it default, but I want to know if there is a best practice that I'm missing. Again, I can't find an MS doc that addresses this particular scenario.
View 14 Replies
View Related
May 13, 2008
I'm having problems with SQL 2005 Express Edition exceeding the maximum memory limit. I hard set the minimum to 100 and the maximum to 500, but the server is currently using over 800MB and is causing the system to page. Has anyone had any experience with similar issues and if so how did you resolve them.
View 8 Replies
View Related
Jul 31, 2007
We just upgraded the memory of our database server from 2GB to 4GB. And its OS is windows 2003 standard and sql is 2005 standard edition. According to microsoft(http://msdn2.microsoft.com/en-us/library/ms143685.aspx and http://msdn2.microsoft.com/en-us/library/aa366778.aspx#physical_memory_limits_windows_server_2003), this configuration should allow database use up to 4 GB memory. My question is : Do I need to do anything(such as: adjust the maximum memory in management studio) to let our server be able to consume this extra 2 GB memory?
Does this solution http://support.microsoft.com/kb/274750 apply for SQL server 2005?
View 1 Replies
View Related
