SQL Server 2005 And DTC Enabling On 2k Server
Aug 7, 2006
I
am using SQLServer 2005 and .NET when I use the following
statements:
using (TransactionScope
objTransaccion = new TransactionScope(TransactionScopeOption.Required))
...
objTransaccion.Complete();
I
get the following error:
System.Transactions.TransactionManagerCommunicationException:
Network access for Distributed Transaction
Manager (MSDTC) has been disabled.
Please enable DTC for network access in the
security configuration for MSDTC using the Component Services Administrative
tool. (Exception from HRESULT: 0x8004D024)
I
am trying to enable the DTC on Windows 2000 Server but the references seem to
be to Windows 2003 Server. Any
idea on how to do it on 2k Server?
TIA, Brad.-
View 3 Replies
ADVERTISEMENT
Oct 23, 2006
helloi use Visual Web Developer and SQL server 2005 express , how can i enable service borker of my sql server ?thaks for any helpderin
View 1 Replies
View Related
Aug 14, 2007
we wonder about the tradeoffs of t-sql vs clr in sql server 2005 especially from a memory perspective. Is there documentation available on this subject?
View 8 Replies
View Related
Jun 13, 2007
Hi ,
How do we install a certificate for enabling security on MS -SQL Server 2005?
I tried to install through MMC but it says no " certificate authority found " . Any
help will be highly appreciated , Thanks to you all in advance :-)
Best Regards,
Sudhansu Tiwari
View 3 Replies
View Related
Apr 7, 2004
I am using SQL Server 6.5. By default TCP/IP protocol is not enabled (1433 port is not opened by the server). How can I enable this so that I can use a JDBC driver to connect to it.
In SQL Server 2000, the "SQL Server Network Utility" helps us to enable the TCP/IP protocol. But not able to figure our how/where this can be done in 6.5.
Thanks for any help
View 1 Replies
View Related
Sep 15, 2015
I have log shipping enabled on databases(primary and secondary) and works fine. I need to implement TDE on the database. I have experience on implementing TDE on databases which are not used for log-shipping.
What are the steps needed to setup TDE which are involved with log-shipping.
View 0 Replies
View Related
Oct 12, 2014
I am trying to enable CDC feature in SQL Server 2012 Enterprise Edition ( 11.0.2424.0).The command to enable CDC for Database worked fine, but the command for enabling CDC on Table failed.Command used for enabling CDC on table is as follows.
USE DatabaseName
GO
EXEC sys.sp_cdc_enable_table
@source_schema = N'dbo',
@source_name = N'TableName',
@role_name = NULL,
@supports_net_changes = 1
Following is the error message got
Msg 22832, Level 16, State 1, Procedure sp_cdc_enable_table_internal, Line 623...Could not update the metadata that indicates table [dbo].[TableName] is enabled for Change Data Capture. The failure occurred when executing the command '[sys].[sp_cdc_add_job] @job_type = N'capture''. The error returned was 22836: 'Could not update the metadata for database DatabaseName to indicate that a Change Data Capture job has been added. The failure occurred when executing the command 'sp_add_ jobstep_ internal'. The error returned was 14234: 'The specified '@server' is invalid (valid values are returned by sp_helpserver).'. Use the action and error to determine the cause of the failure and resubmit the request.'. Use the action and error to determine the cause of the failure and resubmit the request.
View 4 Replies
View Related
Jan 21, 2015
SSISDB 2014 - Enabling CLR - Is there are kind of security risks for enabling CLR when creating SSISDB?
View 0 Replies
View Related
May 25, 2007
Hi
I have an existing instance of sql express 2005 w/advanced services installed. When I installed I did not install full text search. Is there a way I can enable full text search on this existing instance?
Thanks
View 1 Replies
View Related
Nov 26, 2014
We are planning to 2014 migration in few days.
ServerA----- ServerA1
ServerB---- ServerB1
In serverA we have 5databases. And making 5databases as availability group. The replica is ServerA1
In server B we have 3 databases. And the making those 3 databases as an availibility group. The secondary replica is ServerB1.
What is the best option to configure the quoram drive in this situation.
Also Server A1 & Server B1 also we use for reporting purposes.
We have some sensitive data. Is it possible to delete the data while reading the data?
How the memory optimization feature work with always on?
View 8 Replies
View Related
Apr 12, 2008
I have SQL 2005 (v9.0.3042) on Windows Server 2003. The sql server is running under LocalSystem account.
I am trying to enable SSL encryption as described in the article http://support.microsoft.com/kb/316898.
I have logged onto the machine as an administrator when creating a new certificate request in MMC. I have set "Force Encryption" to true on server and restarted the server.
However all my clients (.net code, SQL Server Management Studio) successfully connect to the server without "Encrypt=Yes". I expected to see a ssl error or some kind of error denying connection because the cliend did not request ssl ecnryption.
what am I missing? any help would be greatly appreciated.
thanks
View 8 Replies
View Related
Apr 14, 2013
I'm trying to activate FILESTREAM on my SQL Server 2012, however i'm not accomplishing it. I've tried to follow this instructions: [URL] ...
My SETUP is the following:
Windows 8 (64 bit)SQL Server Standard Edition - Service Pack 1 (64 bit)SQL Version: (11.0.3128.0)
When I go to the configuration manager, on the FILESTREAM tab has a message:
"A previous FILESTREAM configuration attempt was incomplete.
FILESTREAM may be in an inconsistent state until re-configured."
If I click Enable FILESTREAM and "Apply", I get the following message:
"There was an unknown error applying the FILESTREAM settings. Check the parameters are valid. (0x80070002)"
I also read somewhere to run "EXEC sp_configure", which produces the result:
"filestream access level - 0 2 2 0"
Running "SELECT SERVERPROPERTY ('FilestreamEffectiveLevel');" returns 0.
View 2 Replies
View Related
Jul 6, 2006
Hi there,
I am trying to create an un-attended SQL 2005 Express install. I have successfully made my own template.ini file to install SQL the way I like but I cannot find a way to make it install with the "Ad hox remote queries" option enabled.
Is there anyway to do this? I can't seem to find any switches in the INI file to allow this.
Thanks
Joseph Beckett
View 7 Replies
View Related
Apr 20, 2007
My server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
View 8 Replies
View Related
Sep 3, 2007
I installed Visual Studio 2005 Professional then after that was installed and running, I tried to install the the SQL Server 2005 Developer's Edition which installed but I do not get the SQL Server 2005 Studio Manager. I have remove and reinstalled but it never gets installed. Any ideas?
Chuck
View 4 Replies
View Related
Jan 21, 2008
We have been using Sql Server 2005 Compact Edition 3.1 RDA synchronization method successfully on Sql Server 2000 database. Recently we moved the database to Sql Server 2005, sync doesn't work anymore, it just hangs on one table. On further investigation, we found out that it's the index on that table that causes this. We removed the index, it works fine. We are wondering the root cause, removing the index is not a solution for us. Any thoughts?. Thanks.
View 1 Replies
View Related
Feb 22, 2008
(1) I have already installed of SQL Server 2005 Developer Edition first.
(1) Can I install visual studio 2008 without the 2005 express edition of SQL server? Will be any problems because I don't have express edition of SQL server? Do I need to install the express edition of SQL server as well?
(3) How to use SQL Server 2005 Developer Edition instance on visual studio 2008?
View 3 Replies
View Related
Aug 10, 2007
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
View 1 Replies
View Related
Aug 10, 2007
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
View 5 Replies
View Related
Aug 8, 2006
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
View 11 Replies
View Related
Jun 5, 2006
I
am trying to install SQL 2005 in a 2-node virtual Windows 2003 cluster. I set
the cluster up through Virtual Server 2005 with 2 virtual nodes and one
virtual domain. The nodes can connect to each other as well as the
physical machine. When I try to install a fresh copy of SQL 2005 on my
cluster, I get an error every time. The
error stops the installation while checking system configuration after
installing prerequisites. The log file entry is as follows:
*******************************************
Setup Consistency Check Report for Machine: --SERVERNAME--
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: Warning
Description:
IIS is not installed, therefore Report Server feature will be disabled
Action: Install IIS in order for Report Server feature to be enabled
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
1
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run:
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache
Source File Name: datastoreclusterinfocollector.cpp
Compiler Timestamp: Fri Sep 16 13:20:12 2005
Function Name: ClusterInfoCollector::collectClusterVSInfo
Source Line Number: 883
----------------------------------------------------------
Failed to detect VS info due to datastore exception.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
----------------------------------------------------------
Failed to find a cluster group that owned shared disk: J:
WinException : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
View 3 Replies
View Related
Jul 23, 2007
I have a SQL Server 2005 evaluation that has already been installed and setup on a server. I believe it originally had a 180 day eval. There have been numerous databases and users added as well as maintenance plan created...
The eval was put on the machine as an interim solution while waiting for paper work and order processiing things to happen. All the paperwork and ordering... have been completed and I now have the real SQL Server 2005 Standard Edition license key ....
I am very new to SQL Server and need to determine ...
1. Can I update the eval copy to become permanently licensed?
2. Would I want to upgrade the eval to permanent? Will I lose any capabilities by keeping the current eval setup?
If it is reasonable to keep the eval setup
3. How do I go about entering the license key to make it permanent?
If it is necessary to install the new Standard Edition...
4. How do I install it while maintaining the already defined databases, data, users, maintenance plan...
Thanks in advance for any and all help.
Chris
View 5 Replies
View Related
Aug 12, 2007
Hi,
I am developing an application for pocket pc 2003 smart device which utilizes synchronization between SQL CE 2005 and SQL server 2005 by means of REMOTE DATA ACCESS method call PULL( ) and PUSH( ) but currently these are the details of the error Im encountering when PULL( ) method is called:
Error code: -2147467259
Descripion: An error occured on the computer running IIS.Restart the IIS server.
Minor error: 28022
Source: SQL server CE
Currently Im developing this application as a final project and due to some limitations I have setup my pc to act as the SQL server and the IIS server both on the same machine.
Any help will be appreciated, thanks.
View 5 Replies
View Related
Feb 13, 2008
When I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that
we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.
Questions:
1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server?
2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC. Any expected
problems when running both 2000 and 2005 SQL Server at the same database server?
3. What is the best configuration for running SQL Server 2005 when we have old 2000 databases? Upgade or not upgrade?
TIA,
Jeffrey
View 4 Replies
View Related
Sep 20, 2006
When I try to migrate a database on a SQL Server 2000 server to a SQL Server 2005 server with the Copy Database Wizard of the SQL Server Management Studio, I'm confronted with the following problem;
Performing operation...
- Add log for package (Success)
- Add task for transferring database objects (Success)
- Create package (Success)
- Start SQL Server Agent Job (Success)
- Execute SQL Server Agent Job (Error)
Messages
* The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
When I take a look at 'Event viewer' on the SQL 2005 server, the following error is displayed;
InnerException-->An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005,
this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I already enabled the MSSQLSERVER network configuration protocols (TCP/IP and Named Pipes ).
How do I solve this problem?
View 9 Replies
View Related
Jan 22, 2008
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
View 4 Replies
View Related
Mar 24, 2007
Hello,If I backup and restore an express database to sql server 2005 standard, will there still be limitations in regards to the database size, cpu...etc.? Thanks,Jon
View 1 Replies
View Related
Dec 16, 2005
Do you now, How can I move database with datas to release version of sql server?
Procedores backup/restore can't help becouse of unsuported version database.
Any ideas?
View 2 Replies
View Related
Feb 18, 2008
How do I upgrade Sql Server 2005 Express to SP2 if I also have SQL Server 2005 Enterprise SP2 already on the same box? I installed Sql Server 2005 Enterprise first, then applied SP2, then installed Visual Studio 2008 (which installed SQL Server 2005 Express).
When I try to upgrade Sql Server 2005 Express to SP2 using the special Express edition of SP2, I get an error message that says "None of the selected features can be installed". I end up having to cancel the install of SP2.
I'm left with SQL Server 2005 at level 9.0.3054 and SQL Server 2005 Express at 9.0.3042. How can I bring SQL Server Express 2005 to the same level as SQL Server 2005 Entperprise?
View 2 Replies
View Related
Mar 29, 2007
Hello!! How can I upgrade from SQL Server 2005 Express Edition to SQL Server 2005 Enterprise Edition? I see allot of example of upgrading from SQL Server 2000 to SQL Server 2005, but no example on upgrading from SQL Server 2005 Express to SQL Server 2005 Enterprise or Standard. Is this possible?
View 6 Replies
View Related
Sep 30, 2007
I need to install SQL Server 2005 Standard Edition on a new Windows Server 2003 machine that has SQL Server 2005 Express Edition installed by a backup application (Backup Exec). Will I need to uninstall the express edition in order to install the standard edition? Can the two coexist as separate instances or will the standard edition installation simply upgrade the express installation?
Thanks
View 3 Replies
View Related
