Hi!
Can I process a cube without error if there is an application that writes data into the source SQL Server database?
Do I have to stop that application every time when I want to process the cube?
Hi,
*every processing* of a cube with 7 dimensions 5 measure groups (no table has more than 100.000 rows) hangs while trying to process the measure groups. I have to restart the Analysis Service all the time. But even worse every 2nd processing crashes the whole Analysis Services Process.
The only time I could sucessfully deploy a cube was with 1 measure group only.
How can anyone do any serious work with Analysis Services?
The error messages from evenlog are not helpful either.
Thanks,
Tobias
EventType sql90exception, P1 msmdsrv.exe, P2 9.0.3054.0, P3 46048069, P4 msmdsrv.exe, P5 9.0.3054.0, P6 46048069, P7 0, P8 005e9430, P9 00000000, P10 NIL.
The description for Event ID ( 22 ) in Source ( MSSQLServerOLAPService ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Internal error: An unexpected exception occured..
When I highlight a few
partitions and start processing, the process occasionally stops with a
message that operation has been canceled, like this:
Response 3
Server: the operation has been cancelled.
Response 4
Server: the operation has been cancelled.
Response 5
Server: the operation has been cancelled.
..etc...
(no further error message details are provided)
SQL profiler shows that batch was completed (but rowcount shown in process progress log is too small).
Analysis
Services profiler shows no messages at that time at all. It just shows
messages when it started, and when I restarted the processing.
The Analysis trace appears to be stopped when processing stops with "Server: the operation has been cancelled."This
is an occasional error and sometime occurs within 15-20 minutes from
starting to process. It could fail on 1st partition in the process list
, or on some partition in the middle. Some partitions might run for a
few hours and not error out, but sometimes it fails quickly.I was not sure if this is an issue with the underlying fact data, so I broke up the last partition where it failed into 5 smaller partitions, they processed OK separately.I think restarting SQL Server and SSAS helps to process a few more partitions. Some that failed with this problem process OK after restart, but some fail again.
(apologies for re-posting, wanted to put under more specific thread title)
I have an SSAS 2005 database "A" and SSIS package "P" which process full "A" olap database.
SSAS SERVER connection string is based on a variable read from XML configuration file.
It works well in BIDS, but when i deployed, the package failed at the step connecting SSAS, the message is "a connection cannot be made, please ensure the server is running"
In the connnecting string, i am using server name like servera.xx.com, if I change it to IP address, it works.
if I change it to Localhost(happens to be on the same server), it works.
But I need the server name solution as IP may be changed.
I installed SP2.
Any suggestion?
Thanks and regards
we have our cubes in Server A and SQL DB resides on Server B (we are on SQL 2014), from last couple of days are cube started failing due to below error:
OLE DB or ODBC error: Protocol error in TDS stream; HY000; Protocol error in TDS stream; HY000; Protocol error in TDS stream; HY000; Communication link failure; 08S01; TCP Provider: An existing connection was forcibly closed by the remote host.
; 08S01
I have been going through some blogs to understand the error but don't find any specific yet.
Hi All,
I have 3 cubes in a single SSAS database and these cubes should be processed using the following schedule
Cube 1 - Every Day
Cube 2 - Every Week
Cube 3 - Every Month
Cube 4 - Every Day
The issue that I face is that these cubes share the dimensions and so I cant do a FULL process of these SHARED Dimensions as it will affec other cubes.
I can expect additions and deletions to my dimension data , but the structure remains the same. It would be great if someone can suggest how to go about processing the dimensions. I am confused with the number of options(Process Incremental, Process Update etc.,) available for processing the dimensions.
I will creating a SSIS package to automate the processing. One more question is say, if Cube 2 fails during a day and Cube 1 has succesfully processed on the same day earlier, how do I revert back to the old state of Cube 2? Does this mean that I need to do a back up of the SSAS database before processing each cube?
Apologies if I had missed anything.
Thanks!
When I process a new cube I recieve an error "Error (211): Unknown dimension member ' 8'; Time: 8/11/00 1:09:45 PM". Any ideas about what this error is about ?
View 2 Replies View RelatedHi,
I am trying to Process a analysis server Cube and I am getting an error message saying
syntax error converting the varchar value A.H to column of type int.; 22018.
Can somebody tell me how to remove this error.
Thanks,
Praveen
I have a cube which can be processed in our development server. However, when it is deployed to the UAT server, the cube processing was hanged. What I have done then:
Checking sys.sysprocesses found that there are 8 threads suspended with waittype=CXPACKET. The threads are all reading the transactional database.
We then searched from web that CXPACKET is related to parallel query processing. So we have done the following:
Select 'Sequential' option in processing -> result is the same with CXPACKET.
Select 'Parallel' with parallel thread set to 1 -> result in one thread with ASYNC IO wait type
Select 'Parallel' with parallel thread set to 2 -> result in CXPACKET.
Change the number of CPUs SQL Server use from 8 to 1 -> result in one thread with ASYNC IO wait type
Change the number of CPUs SQL Server use from 8 to 2 -> result in CXPACKET.
Change 'Maximum parallel query' in SQL server = 4 -> result in CXPACKET.
All the trials result in hanged status
Difference between development server and UAT server:
1. CPU : dev = 2, UAT = 8
2. SQL Server Version : dev = 2005 SP1, UAT = 2005 SP2
3. database size : dev > UAT
Anyone has the problem and solution before? Please share. Thanks.
I just started getting a new error message to me:
Errors in the high-level relational engine. The data source view does not contain a definition for the 'WeightRecieved' column in the 'dbo_factPurchases' table or view.
The problem is WeightReceived IS defined in my DSV so I don't know what to do about this error.
Any suggestions?
Hello!
I'm looking for a possiblity to schedule the processing of a ms olap services cube in a SQL Server Agent job. Has anyone expericiences with that? Are there any alternatives for scheduling the processing?
Thanx, Wiebke
Hi,
I have a problem with processing my cube. My fact table (with telephone data) contains about 400,000 records... which is increasing rapidly (400,000 records is about 8 months of data)...
I have a few dimensions:
Dimension User: about 200 records
Dimension Line: about 200 records
Dimension Direction: 4 records
Dimension Date: 365 records for each year
Dimension TimeInterval: with 24 records
So far so good... when I process this dimension I have no problem....
However, when I add a dimension (CalledNumber, with exactly 101 records) the processing hangs as soon as it starts...
The SQL performed when processing the cube looks like this:
SELECT field1, field2,... fieldn
FROM table1, table2,.... tablem
WHERE
(table1.id=table2.table1id)
AND
(table2.id=table3.table2id)
...
When I execute above SQL in the Query Analyser from SQL Server Enterprise Manager, it ALSO hangs...
I am not really suprised by that, because this SQL first create a huge table of 400,000 x 200 x 200 x 4 x 365 x 24 x 101 records and after that works through the WHERE statements to filter out the appropriate records.
for me it would be more logical to use the following code to process the cube, but that cannot be changed in Analysis Manager:
SELECT field1, field2,... fieldn
FROM table1
LEFT JOIN table2 ON (table1.id=table2.table1id)
....
LEFT JOIN tablem ON (tablem.id = tablem-1.tablemid)
When I execute above SQL in the Query Analyser from SQL Servel Enterprise Manager, it does NOT hang, but performs the query in about 35 seconds....
But Analysis Manager does not allow me to change the SQL used for processing the cube...
What can I do to add more dimensions to my cube... (It will be more anyway after adding the CalledNumber dimension)??
any suggestions?
PS. forgot to mention: I use Sql Server 2000
Hi,
cube processing is taking more time in a new server while same cubes takes less time in another server.
the cubes are processed through DTS package
can anybody help finding out the possible reasons for this.
Regards
Naseem
Hi,
I have a problem with processing my cube. My fact table (with telephone data) contains about 400,000 records... which is increasing rapidly (400,000 records is about 8 months of data)...
I have a few dimensions:
Dimension User: about 200 records
Dimension Line: about 200 records
Dimension Direction: 4 records
Dimension Date: 365 records for each year
Dimension TimeInterval: with 24 records
So far so good... when I process this dimension I have no problem....
However, when I add a dimension (CalledNumber, with exactly 101 records) the processing hangs as soon as it starts...
The SQL performed when processing the cube looks like this:
SELECT field1, field2,... fieldn
FROM table1, table2,.... tablem
WHERE
(table1.id=table2.table1id)
AND
(table2.id=table3.table2id)
...
When I execute above SQL in the Query Analyser from SQL Server Enterprise Manager, it ALSO hangs...
I am not really suprised by that, because this SQL first create a huge table of 400,000 x 200 x 200 x 4 x 365 x 24 x 101 records and after that works through the WHERE statements to filter out the appropriate records.
for me it would be more logical to use the following code to process the cube, but that cannot be changed in Analysis Manager:
SELECT field1, field2,... fieldn
FROM table1
LEFT JOIN table2 ON (table1.id=table2.table1id)
....
LEFT JOIN tablem ON (tablem.id = tablem-1.tablemid)
When I execute above SQL in the Query Analyser from SQL Servel Enterprise Manager, it does NOT hang, but performs the query in about 35 seconds....
But Analysis Manager does not allow me to change the SQL used for processing the cube...
What can I do to add more dimensions to my cube... (It will be more anyway after adding the CalledNumber dimension)??
any suggestions?
PS. forgot to mention: I am using Sql Server 2000
We have a MS-OLAP cube that has about 11 partitions and I have created a prototype package which processes these partitions conditionally based on expressions that are fed values from a SQL Server control table. It appears that one or more of the partitions seem to fail due to the fact that all of the data for the various partitions come from the same huge fact table. Is there a way to control the level of concurrency within the package itself? If not, I am thinking I should move some of the partitions to process based on other partitions completing their process successfully. Appreciate any help.
View 2 Replies View Related
I am trying to log the processing time details so that we can identify bottlenecks. My SSIS package has a bunch of OLAP processing tasks. In the Event Handler (onPreExecute and onPostExecute events), I am trying to capture the start and end time for each OLAP processing task by using an "Execute SQL task". In the event handler, I have a conditional expression that checks the following:
@SourceName != @[User::Expression1]
where Expression1 is a variable that contains the value of "Execute SQL Task". This expression I thought would be true only for OLAP processing tasks which btw never fire the OnPreExecute or OnPostExecute events. What am I doing wrong?
Hi! I have a problem with cube processing. When i am processing a cube with 5 million rows it will stop responding and the process on the SQL server has been suspended with the waittype ASYNC_NETWORK_IO. The waittime changes both up and down.
However if i change the the view(the cube is getting the data from a view that gets the data from ONE table) to only return up to 35 rows it works. However, 40 and it will go into suspended again. And i can let it run for several hours without it finishing. Other cubes in the same database with more rows works fine.
If i just run the query that is used when processing in Management Studio it works fine.
I have SP2 both on the AS and DB server.
The DB server looks like this:
4GB ram
2 x 2.80 dualcore intel xeon
The AS server:
16 GB ram
2 x 3.00 intel xeon X5450 quadcore
Any ideas?
Edit:
And the AS service runs at 13%, in task manager it has one processor at 100 %.
SQL Server Profiler shows no activity on the AS server.
i am getting the following error when i am processing the cube in SSAS 2008...Errors in the back-end database access module. The size specified for a binding was too small, resulting in one or more column values being truncated. Errors in the OLAP storage engine: An error occurred while the 'Policy Type' attribute of the 'Policy Type' dimension from the MyDemo' database.i verified the datatype column length for policytype column in the dimension as well as all fact views.
View 9 Replies View RelatedI have designed a cube. It has two fact tables and some dimensions. Fact table to fact table is many to many relationship.
For example
FactMain
DataKey(PK), StartDateKey, PostCodeKey, TotalCost
FactBridge
DataKey(FK), ProductKey(FK), Position  - PrimaryKey on DataKey + ProductKey + Position
DimProduct
ProductKey(PK), ProductCode
Cube is built successfully, processed successfully.When I try to process the cube from agent job, I am getting error "Attribute key not found: tablename, value..." I have added a job step to run AnalysisServices Command. I have taken the command from cube process script(taken from manually process the cube and take script generated). I used ProcessAffectedObjects = "true" in the script. When I checked the tables, the key does exist. Why am I getting this error?
I am getting following errors when i processed Cube in Production.An error occurred while the dimension, with the ID of 'DIM_PARTICIPANT', Name of 'DIM_PARTICIPANT' was being processed.
End Error
An error occurred while the 'PARTICIPANT NAME' attribute of the 'DIM_PARTICIPANT' dimension from the 'XL_GCS_SelfServices' database was being processed.
End Error
An error occurred while the dimension, with the ID of 'v d Transaction', Name of 'DIM_TRANSACTION' was being processed.
End Error
An error occurred while the 'INVOICE NUMBER' attribute of the 'DIM_TRANSACTION' dimension from the 'XL_GCS_SelfServices' database was being processed.
End Error.
But i implmented same in Dev and QA server, there is no issues found.
Jonathan Yang Jonathan.Yang@Weyerhaeuser.Com
How to launch MSOLAP cube processing in batch mode?
================================================== =
When one wants to run SQL Statement or Stored procedure in batch mode, OSQL.exe can be used.
Now we have created OLAP cube and want to process(populate) cube. From MSOLAP Analysis manage we can right click a cube name then click “Process”. But how to do this in batch mode? I.e. any equivalent thing of OSQL.exe to help process cube?
I believe a matured tool should work good in both interactive and batch mode. Unfortunately I did not find how to launch cube processing from MS OLAP documents. Looks like we have to write one using DSO supplied by Microsoft. Do you know if there is any tool for us not to write one? Pls help.
Hi,
I am processing one cube using Full Process option and it's giving
following error.
Analysis Server Error: Internal error [Object does not exist] '11948' ;
Time:1/8/2004 6:11:11 PM
Error(-2147221421): Internal error (Internal error [Object does not
exist] '11948' ); Time:1/8/2004 6:11:11 PM
Can anyone help me on this.
I am working on SQL 2012.We have a SSAS Cube build. On top of it client use Excel to connect to SSAS Cube and See the reports.My Cube process every hour and take almost a 1-2 min to Process.When ever End user/Client See or refresh the Excel report (Which use Cube as Source),WHEN CUBE IS PROCESSING ,they get an error that Source is not available
We Have tried best but cannot bring down the Processing time of the cube to 3-5 Second , so that End user don't face report refresh issue at the moment of cube processingÂ
Requirement :In Case End User see the report while Cube is processing from back end , Instead of Error they should see some customize Msg which we can provide some thing Like "Data is Refreshing , please wait ".
I Have one cube, First time its Processed successfully and browsed fine. Now i was change in the cube Calculations/somewhere, now again process the process failed. I am unable to browse my cube. Is there any option to Rollback this processed cube and Browse with existing cube?What is require is, If cube process is fail, i want to browse the cube with existing cube after modify the cube also(if fails).
View 9 Replies View RelatedAll I get back is an error message of "Analysis Services Processing Task Error: A Connection cannot be made. Ensure the Server is running" The server is running, I can process the cube by connecting to the AS instance and right-click processing it.
I can process the cube by running the SSIS task inside of SSDT Just when I deploy the SSIS package (in Project mode) and then execute it do I get the error message.
SQL Server, SSAS, and SSIS processes are all running under the same account. SSAS is on a separate server from SSIS and SQL if that matters.
I am trying to create a Adventure Works Tabular cube in my developing machine and im having problems deploying the tabular cube (the DW database was firstly attached without problems)
So I'm having problems processing Adventure Works Tabular Cube, the problems are somewhere between SSAS project configuration and running privileges, i think. I'll describe exactly where i am:
- in SSMS 2012, connections, tables and roles and roles are empty, i only have the full name of the database when I try to process i get an error "the table with id of "product category 92583829......", Name of Product Category refereced by the model Cube, does not exist. An error ocurred when loading the model cube, '?c:program filesmicrosoft
sql serverMSAS11.MSSQLSERVEROLAPDataAdventureWorks Tabular model SQL 2012.0.dbModel.21.cub.xml'. (Microsoft AnalysisServices.)"
- in SQL Server configuration Manager, I have
Sql Server (MSSQLSERVER) running with account NT ServiceMSSQLSERVER
Sql Server Analysis Services (MSSQLSERVER) running with account .L.ABCDE , which is my account, i've changed because i've read somewhere that i could have problems with privileges.
(Note: it's strange because SSAS is tabular, i can see a blue rectangle (sort of) in SSMS but in configurator manager seems to be a cube.)
- in SSAS Project i unzip a clean copy of the project and the first error is that BIM file can't be found, it try's to find server TOSHIBA_S50_BTAB, but as i have only tabular SSAS running, i replace for TOSHIBA_S50... And some time ago it worked, now it doesn't even found TOSHIBA_S50_B?!!!!
We have set up an IS package to process an AS 2005 database (comprising cube & dimensions, etc) daily, via a SQL Server Agent job on both development and production systems. This has been working fine for months.
A new dimension was added to the cube on the development system - automatic processing via the IS package continued without issue. However, when the new dimension was added to the production system the IS package no longer processes the cube correctly. Although all appears ok (and all is present and correct in the logs), no data updates to the cube are made. Only when the cube is manually processed does the cube get updated.
Anyone got any ideas about how to get around this issue? We have created a new IS package, with a single Analysis Services Processing Task, and tried this but get the same outcome.
Hi,This is probably a classic scenario with a shared dimension that weneed to use in different cubes, where all fact tables do not offer thesame level of detail. Dimension is snow-flaked.The cube that's causing me troubles was designed by marking the lowestdimension level Diabled and not Visible. This allows me to get rid ofone of the snow-flake tables (the one with the lowest level), thusallowing an INNER JOIN with the remaining table which has a level ofdetail corresponding to the fact table.When processing the cube, I get a 'member with key '[blah]' was foundin the fact table but was not found in the level '[blah]' of thedimension '[blah]'' that seems to indicate that none of my fact foreignkeys exist as primary keys in the dimension table. However if I thenattempt to query the cube, all data seems to be there.Would anybody be in a position (and willing ;-)) to share his/her ownexperience working around a similar issue?Thanks,SRL
View 2 Replies View RelatedI am trying to incrementally update a Cube to get near real time data for the end users. Currently we have a Sql server agent Job that does a FullProcess on the Cube. The Cube consists of a single Measure group which is simply one named query containing inner joins of all the dimensions and fact tables in the underlying relational database. The end users have a lot to upload during the day and they would like us to refresh the cube (near real time) to ensure the adjustments are loaded so that they could reconcile their daily PnLs. We have a MeasureId added which is an auto increment column in the Measures table.
I am trying to schedule the below XMLA query in Sql server agent Job and schedule it to run every 15mins or even less (if possible). However it seems to be not working and keep throwing all sorts of errors.
DECLARE @LastMeasureId AS INT, @myXMLA nvarchar(max)
SELECT @LastMeasureId = "[Measures].[Maximum Measures Id]" FROM
OpenRowset(
'MSOLAP',
'DATA SOURCE=L68F728326574; Initial Catalog=GMDR;',
'SELECT NON EMPTY {[Measures].[Maximum Measures Id]} ON COLUMNS FROM [GMDR]');
[Code] ....
Hi Guys,
We had existing cubes in our Analysis Server, we were required to move them on another Reporting Server which would be using Data Replicated every night to that server. Problem is now source data is divided into 2 Reporting Database Servers. Table Names/View Names are the same in all the Databases. I just want to change the data source pointing to existing Database to the new Reporting Server. Can you tell me how this can be achieved?
Regards,
Kaushal
Hi all
sorry im new with using Reporting Services and even more inexperienced with using cubes.
My situation is as follows. I perform dynamic grouping (user selects the view via a parameter) Depending on the view selected, I need to change the dimension filter in the dataset.. Is this possible ?
Regards,
Neil
We find that if we deploy the OLAP database with a different name on the test server, then regardless of how we change the connection string provided to the SSIS package that processes the cube, then the package fails to connect to the database. To clarify:
In development the OLAP database is called MyOlapDB and the source database is called MySqlDB. Both are on the same machine. When the the application is built and released for test, the test team install the databases on a replica of the production environment (i.e. web app on one machine, OLAP DB on another and SQL database on yet another). They also, quite rightly, implement the new test databases so they incorporate the build version number. So, MyOlapDB123 and MySqlDB123 are both from build 123.
This is when the problems start. Regardless of how the connection string is specified in the job that processes the cube, the SSIS integration package fails with the error:
[Analysis Services Execute DDL Task] Error: Errors in the metadata manager. Either the database with the ID of 'MyOlapDB' does not exist in the server with the ID of 'OurTestServer', or the user does not have permissions to access the object.
We have tried config files and job properties, but neither work. Also, simply attempting to run the package using the DTEXECUI does not work either.
Looking inside the XML of the package, we clearly see the ConnectionManager object which has the original connection string, which is
Data Source=localhost;Initial Catalog=MyOlapDB;Provider=MSOLAP.3;Integrated Security=SSPI;Impersonation Level=Impersonate;
However, editing the initial catalog here still does not solve the problem. Searching the XML for the string MyOlapDB reveals the OLAP database name in two other places - both within the object data of the two Analysis Services Execute DDL tasks.
Anyone know how to solve this problem without having to hack the XML of the package?
I want to change the color of the ssas cube calculated member in formview from red background to white or back to default color settings. This also includes changing the text color back to default. What properties do I have to change?
View 4 Replies View Related