I installed SQL Server 2005 Developer edition on my machine a couple months ago, and now I can't remember how to log in. I don't remember setting up any log in accounts, and whatever I might have set I apparently didn't write down.
Are there default user names and passwords that I could use to get in?
I'm a SQL Server newbie.
Hi all,
Have just tried my sql server 2005 connected asp classic website on II7 for the first time and have gotten some errors.
First off I have unchecked show friendly errors in IE and have enabled ASP to send error messages to the browser.
My error I get is when I execute a basic .asp page:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "mydatabasename" requested by the login. The login failed.
/index.asp, line 10 which is dbConnect.Open cstring
from this peice of code:
sub dbOpen()
set dbConnect = Server.CreateObject("ADODB.Connection")
cstring = "DSN=mysqldsn; Trusted Connection=yes"
dbConnect.Open cstring
end sub
I have gone into ODBC and have setup both a user dsn and file dsn that equals mysqldsn and points to my database (I know you only need to set up one DSN but I'm not sure which)
I also notice under mywebsite home panel there is a connection string option. Do I do anything with that?
Definatley a lot more to it than XP's II6!
Any help or advice would be greatly appreciated.
Hello,
I am currently trying to use the Login control in an ASP.NET website with IIS. The control works fine when I am running the website in debug mode within Visual Studio 2005. However, when I create the Virtual Directory in IIS, and try to log in from there, I get an error message as follows:
Cannot open user default database. Login failed. Login failed for user 'machinenameASPNET'
Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed. Login failed for user 'machinenameASPNET'.
The application is very simple. I created a Login.aspx page with a login control on it, and I have the default.aspx page. I used theASP.NET administration tool to change the authentication mode to AspNetSqlProvider (forms authentication), and to create one user (no roles). I am using the default provider with the aspnetdb.mdf database. I have been working on this for a few days now, and have searched this site but have not found a solution that works for me. Any suggestions?
Jen
create login dave with password='abc', default_database=tempdb
View 6 Replies View Related
Hi,
I am using SQL Server 2005 at home.
My problem is I forgot my password to log in to my server.
I only remember user name is 'sa'.
I haven't used it for two to three months. So I forgot password.
Previously, When I used sql server 2000, my login is as windows login. so no problem.
But this time, I set seperate log in and I got this problem.
Any help will be appreciated.
Thanks
George
Hello everyone,
Since last so many days i am seeing that someone is trying to login to sql server through login name sa.but that login is failed.and this is occuring constantly.
Earlier i had same login failed message for another ip address.i have blocked that ip address through access-list in firewall.but now i am seeing the same message for another ip address.
(1).how can i permenently remove this message from Event log.
(2).What is the impact of this on sql server performance.is sql server performance degraded by this kind of contineous attack?
here i am attaching that report from event viewer log file.
2/26/2007 1:48:18 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:17 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:17 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:17 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:16 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:16 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:16 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:15 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:15 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:15 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:14 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:14 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:14 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:13 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:13 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:12 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:12 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:12 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:11 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:11 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:11 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:10 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:10 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:10 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:09 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:09 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:09 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:08 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:08 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:08 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:07 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:07 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:07 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:06 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:06 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:06 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:05 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:05 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:05 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:04 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:04 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:04 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:03 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:02 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:02 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:02 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:01 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:01 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:01 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:00 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:00 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:00 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:59 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:59 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:59 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:58 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:58 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:57 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:57 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:57 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:56 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:56 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:55 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:55 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:54 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:54 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:54 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:53 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:53 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:53 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:52 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:52 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:52 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:51 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:51 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:50 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:50 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:50 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:49 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:49 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:49 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:48 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:48 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:48 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:48 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:47 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:47 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:47 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:46 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:46 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:45 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:45 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:45 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:44 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:44 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:44 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:43 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:43 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:43 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
Needs your help to resolve this issue.
Thanks,
Bharat
i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.
why ?
Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.
View 4 Replies View RelatedHey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.
I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.
1. I created a blank ASP.NET web site
2. I added a web part manager
3. I added a web part zone
I get the error described above. I have no idea why SQL Server settings are so screwed up.
I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.
The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).
I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.
What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.
I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?
If anyone has anything solid, not guesses, I'd like to know.
Just installed SQL Server 2005 and tested my old VS 2005 ASPnet websites, which were connected toSQL Server 2000 databases before. All my websites were created for local HTTP applications, coded with a connection string with User ID and Password. The SQL Server 2000 was configured as mixed authentication (i.e. with User ID and Password). These websites worked very well with SQL Server 2000 database server.Testing my old VS 2005 websites with SQL Server 2005 database, showed a 'Login failed for a User ''.' error msgalthough the 'Test Connection' on VS 2005 design showed a perfect query for e.g. a GridView control. I have assured that the UserID/Password were correct for Management Studio Security object'slogin and Database Security's user. The server instance was configured with mixed authentication mode. One thing I am not sure of is, when clicking the Management Studio icon, a Connection dialog showed up, asking for a Windows or MIxed authentication? I just stayed with the Windows authentication. What does the authenticationmode have anything to do with the VS 2005 website connection? Should I change to mixed authetnication mode?TIA,Jeffrey
View 3 Replies View RelatedI use SQL server 2005 and I want to set the Default Value or Binding to "", how do I define that? (now if I don't define anything it's NULL)
View 1 Replies View RelatedHi everyone -
Is there a what to get the default database from SQL from a query line?
Each of the users are assigned a default database, so i need to get the default database via a query after the user is authenticated.
thanks
tony
Hi,
I can't performe this:
use databaseX
CREATE LOGIN [abc]
WITH PASSWORD ='xxxxxxxxxxxxx',
DEFAULT_DATABASE = db_name()
or
DEFAULT_DATABASE = [ db_name() ] as well
I know that
DEFAULT_DATABASE = databaseX
works, but how can I create login with default database with db_name() ?
thanks,
Hai Freinds,
Is there any default username and password for sql server 7.0
Thank You
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
In SQL Server 2000, the default database, when changed (for example, from master to db1 for user sa) would be the database that would be active when you opened a Query Analyzer query window. Now, with the Management Studio, if you log in as sa with the default database set to db1, you still get server.master as your database in the embedded query editor. Also, consistent with this behavior, if I open the Query Analyzer and log onto the new SQL Server 2005 database (not recommended, I know, but works), it does the same thing. Again, in 2000, if you changed the default database, the Query analyzer would open a window starting at server.db1, not server.master. Am I missing something in 2005 to make this same default behavior work? ALSO, when logging into the Management Studio with sa (new default DB set), the connection properties of the Studio shows the DB to be master! What gives?
View 3 Replies View RelatedHi Guys,
I installed the Sql Server 2005 Express and the Management studio Express as well.
Does it come with default database so that we can practice on it....If yes, I am not seeing it...How can i find it....? OR
It does not come with Default database and we have to create new one....?
I'm trying to create a login in the default domain. I know I can pullthis information from xp_loginconfig, but don't see how I can use it inthe context of sp_grantlogin.For example, pull the domain the user is currently logged in on andinsert it into the sp_grantlogin script. Has anyone ever done this inthe past?
View 2 Replies View RelatedHello,What are the default login/password to access pubs and northwind databases ?I remember the login = "sa", but nothing about the password.ThanksEric
View 4 Replies View Relatedi login my remote sql server 2005 as 'sa' and then i try the following code:
use master
go
create login [user] with password [user123]
go
yes. that code created me a sql login 'user', but even before i grant any permission to any database, the login manage to acces database: master, tempdb, msdb and one of my application databases' tables and everythings. i like to know what is it i am doin wrong and what are the default access when creating a login, and is it becoz of any configuration in my server ?
any suggestion or answer will be appreciated. thanks
Hi,
I have created an asmx web service that deserializes a JSON string and should execute stored procedures in SQL Server Express 2005, the database is a mdf file. I have created a System DSN which works fine, I have allowed the remote connections and TCP/IP and created the firewall exceptions for sqlserver and sqlbrowser. I believe there's an issue with my connection string, I have tried everything and it still won't connect.
I had another running example but that was on a previous install of Windows XP Pro SP1 with login and this asmx web service worked fine. I run Windows XP Pro SP2 without a login now so I guess I can't use Integrated Security=true or Trusted Connection=yes but does anybody know the default login of a database created in Windows Visual Developer Express?
Here's my connection string:
Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|
antanplan.mdf;Integrated Security=SSPI;User Instance=false;UID=sa;PWD=sa"
And here's the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at WebService.pushJsonAction(String req) in C:Documents and SettingsAlbanMy DocumentsVisual Studio 2008WebSitesWebSite1
antanplan.asmx:line 62
Thank you,
Alban
My environment:
Home PC
Vista Ultimate
SQL Server Developer 2005
I'm about to go absolutely nuts. I've tried so many things including:
1) Of course making sure Remote connections and both TCP/IP and named pipes are enabled for SQL 2005
2) Verified my connection string works. I even tested it in Enterprise Library using the tool and it connects successfully via windows authentication
3) Made sure of course my logged in user is a member of the administrator group and that my user in SQL 2005 logins has db_owner and full rights to the DB I am connecting to. I also made sure the NT AUTHORITY as well as the 3 sql service users have db_owner rights as well as the adminstrator in the SQL Server logins all have db_owner to the DB
4) Started the SQL Server Browser service, SQL Server DB engine, and SQL Server Agent
5) Made sure my site is setup right in IIS 7. I checked the connection string in there as well as it shows up in IIS7 in one of the sections. Using Windows authentication and it is enabled for my site
6) Tried running the .net site using both localhost (IIS) and also tried using the Visual Studio built-in web server. Both give this message still
Error Details:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.SessionState.SqlStateConnection..ctor(SqlPartitionInfo sqlPartitionInfo) +79
[HttpException (0x80004005): Unable to connect to SQL Server session database.]
System.Web.SessionState.SqlSessionStateStore.ThrowSqlConnectionException(SqlConnection conn, Exception e) +227
System.Web.SessionState.SqlStateConnection..ctor(SqlPartitionInfo sqlPartitionInfo) +349
System.Web.SessionState.SqlSessionStateStore.GetConnection(String id, Boolean& usePooling) +285
System.Web.SessionState.SqlSessionStateStore.SetAndReleaseItemExclusive(HttpContext context, String id, SessionStateStoreData item, Object lockId, Boolean newItem) +178
System.Web.SessionState.SessionStateModule.OnReleaseState(Object source, EventArgs eventArgs) +476
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
I am working with a SQL server 2005 database. I have created several new tables. In one of the tables, I need to set up a data field so that it will default to a particular value. For exampe, I need to have a particular data field default to a value of '0'
How can I do this? I would prefer not to do this through Query analyzer. I have been using the interface to SQL server 2005 provided through the Visual Studio IDE.
Thanks in advance, Bill
Hi!
We got a problem with sql sever in vwd 2008 express.
Q1: is it possible to use an "image button" as an "insert button"?
Q2: Do you have to put the "insert button" in the same table as the "binded" variables for the textbox fields?
In the code we tried to position the "insert button" att three different locations but only one worked. At LOCATION 1 all fields except "presentation" were saved to the database.
At LOCATION 2 the "image button" skips saving the fields.
At LOCATION 3 we get an error msg:
[SqlException (0x80131904): Måste deklarera den skalära variabeln "@arbetstakt".]
(in english: must declare the ?scalar? variable...)
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" AutoEventWireup="false" CodeFile="Tunnel1.aspx.vb" Inherits="Default2" title="Untitled Page" %>
<asp:Content ID="Main" ContentPlaceHolderID="Main" Runat="Server">
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
InsertCommand="INSERT INTO konsult(arbetstakt, typ, presentation, postadress, språk, postnr, CO, epost, mobil, telefon, enamn, fnamn, pnummer) VALUES (@arbetstakt, @typ, @presentation, @postadress, @språk, @postnr, @CO, @epost, @mobil, @telefon, @enamn, @fnamn, @pnummer)">
</asp:SqlDataSource>
<asp:FormView ID="FormView1" runat="server" DataSourceID="SqlDataSource1" DefaultMode="Insert">
<InsertItemTemplate>
<table cellpadding="0" cellspacing="0" width="100%" border="0">
<!-- Menyrad -->
<tr>
<td colspan="2">
<table align="right" cellpadding="0" width="100%" bgcolor="#EEEEEE">
<tr>
<td align="left">
<script type="text/javascript" language="JavaScript">showMenus(1,'Horizontal')</script>
</td>
<td align="right">
<!-- <asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
InsertCommand="INSERT INTO konsult(arbetstakt, typ, postadress, språk, postnr, CO, epost, mobil, telefon, enamn, fnamn, pnummer) VALUES (@arbetstakt, @typ, @postadress, @språk, @postnr, @CO, @epost, @mobil, @telefon, @enamn, @fnamn, @pnummer)">
</asp:SqlDataSource> -->
<b>Steg 1</b> av 5: Personuppgifter </td>
<td bgcolor="#EEEEEE" width="25" height="25" align="center">
<asp:ImageButton ID="ImageButton1" runat="server"
ImageUrl="~/Images/TunnelKnapp1vald.jpg" PostBackUrl="~/Tunnel1.aspx" AlternateText="Steg 1" />
</td>
<td bgcolor="#EEEEEE" width="25" height="25" align="center">
<asp:ImageButton ID="ImageButton2" runat="server"
ImageUrl="~/Images/TunnelKnapp2.jpg" PostBackUrl="~/Tunnel2.aspx" AlternateText="Steg 2"/>
</td>
<td bgcolor="#EEEEEE" width="25" height="25" align="center">
<asp:ImageButton ID="ImageButton3" runat="server"
ImageUrl="~/Images/TunnelKnapp3.jpg" PostBackUrl="~/Tunnel3.aspx" AlternateText="Steg 3"/>
</td>
<td bgcolor="#EEEEEE" width="25" height="25" align="center">
<asp:ImageButton ID="ImageButton4" runat="server"
ImageUrl="~/Images/TunnelKnapp4.jpg" PostBackUrl="~/Tunnel4.aspx" AlternateText="Steg 4" />
</td>
<td bgcolor="#EEEEEE" width="25" height="25" align="center">
<asp:ImageButton ID="ImageButton5" runat="server"
ImageUrl="~/Images/TunnelKnapp5.jpg" PostBackUrl="~/Tunnel5.aspx" AlternateText="Steg 5" />
</td>
</tr>
</table>
</td>
</tr>
<!-- Sidan -->
<tr>
<!-- Topp skuggor -->
<td width="500" height="15" style="background-image: url('Images/toppskugga_Liten.jpg'); background-repeat: no-repeat; background-position: center bottom">
<table cellpadding="0" cellspacing="0">
<tr>
<td width="20"></td>
<td width="460"></td>
<td width="20"></td>
</tr>
</table>
</td>
</tr>
<tr>
<!-- Mellan skuggor -->
<td width="500" style="background-image: url('Images/mellanskugga_Liten.jpg'); background-repeat: repeat-y; background-position: center bottom">
<table cellpadding="0" cellspacing="0">
<tr>
<td width="20"></td>
<td width="460">
<!-- <asp:FormView ID="FormView1" runat="server" DataSourceID="SqlDataSource1" DefaultMode="Insert">
<InsertItemTemplate> -->
<table width="100%">
<tr>
<td width="150">Personnummer:*</td>
<td width="250"><asp:TextBox Width="150" ID="pnummerTextBox" runat="server" Font-Size="X-Small" Text='<%# Bind("pnummer") %>' /></td>
</tr>
<tr>
<td width="150">Förnamn:*</td>
<td width="250"><asp:TextBox Width="150" ID="fnamnTextBox" runat="server" Font-Size="X-Small" Text='<%# Bind("fnamn") %>' /></td>
</tr>
<tr>
<td width="150">Efternamn:*</td>
<td width="250"><asp:TextBox Width="150" ID="enamnTextBox" runat="server" Font-Size="X-Small" Text='<%# Bind("enamn") %>' /></td>
</tr>
<tr><td><br></td></tr>
<tr>
<td width="150">Telefon:</td>
<td width="250"><asp:TextBox Width="150" ID="telefonTextBox" runat="server" Font-Size="X-Small" Text='<%# Bind("telefon") %>' /></td>
</tr>
<tr>
<td width="150">Mobil:*</td>
<td width="250"><asp:TextBox Width="150" ID="mobilTextBox" runat="server" Font-Size="X-Small" Text='<%# Bind("mobil") %>' /></td>
</tr>
<tr>
<td width="150">Epost:*</td>
<td width="250"><asp:TextBox Width="150" ID="epostTextBox" runat="server" Font-Size="X-Small" Text='<%# Bind("epost") %>' /></td>
</tr>
<tr>
<td width="150">CO:</td>
<td width="250"><asp:TextBox Width="150" ID="COTextBox" runat="server" Font-Size="X-Small" Text='<%# Bind("CO") %>' /></td>
</tr>
<tr>
<td width="150">Postnummer:</td>
<td width="250"><asp:TextBox Width="150" ID="postnrTextBox" runat="server" Font-Size="X-Small" Text='<%# Bind("postnr") %>' /></td>
</tr>
<tr>
<td width="150">Postadress:</td>
<td width="250"><asp:TextBox Width="150" ID="postadressTextBox" runat="server" Font-Size="X-Small" Text='<%# Bind("postadress") %>' /></td>
</tr>
<tr><td><br></td></tr>
<tr>
<td width="150">Övrigt språk:</td>
<td width="250">
<asp:DropDownList Width="156" ID="språkDropDownList" runat="server" Font-Size="X-Small" Text='<%# Bind("språk") %>'>
<asp:ListItem>Välj språk</asp:ListItem>
<asp:ListItem>Engelska</asp:ListItem>
<asp:ListItem>Tyska</asp:ListItem>
<asp:ListItem>Ryska</asp:ListItem>
<asp:ListItem>Spanska</asp:ListItem>
<asp:ListItem>Franska</asp:ListItem>
</asp:DropDownList>
</td>
</tr>
<tr>
<td width="150">Konsulttyp:</td>
<td width="250">
<asp:DropDownList Width="156" ID="typDropDownList" runat="server" Font-Size="X-Small" Text='<%# Bind("typ") %>'>
<asp:ListItem>Intern</asp:ListItem>
<asp:ListItem>Extern</asp:ListItem>
</asp:DropDownList>
</td>
</tr>
<tr>
<td width="150">Arbetstakt:</td>
<td width="250">
<asp:DropDownList Width="156" ID="arbetstaktTextBox" runat="server" Font-Size="X-Small" Text='<%# Bind("arbetstakt") %>'>
<asp:ListItem>25%</asp:ListItem>
<asp:ListItem>50%</asp:ListItem>
<asp:ListItem>75%</asp:ListItem>
<asp:ListItem>100%</asp:ListItem>
</asp:DropDownList>
</td>
</tr>
<tr>
<td></td>
<td></td>
<td align="right">
<!-- LOCATION 1
<asp:Button ID="InsertButton" CommandName="Insert" CausesValidation="True" runat="server" Text="Spara" /> -->
</td>
</tr>
</table>
<!-- </InsertItemTemplate>
</asp:FormView> -->
</td>
<td width="20"></td>
</tr>
</table>
</td>
<td rowspan="3" width="240" valign="top">
<table cellpadding="0" cellspacing="0">
<tr>
<td width="240" align="right">
<!-- <img src="Images/PilBak.jpg" alt="Bak"/> -->
<!-- LOCATION 2
<asp:ImageButton ID="InsertButton" CommandName="Insert" runat="server" CausesValidation="True" ImageUrl="Images/PilFram.jpg" PostBackUrl="Tunnel2.aspx" AlternateText="Fram" /> -->
</td>
</tr>
<tr>
<td width="240" style="background-image: url('Images/toppskugga_Mini.jpg'); background-repeat: repeat-y; background-position: center bottom"> </td>
</tr>
<tr>
<td width="240" style="background-image: url('Images/mellanskugga_Mini.jpg'); background-repeat: repeat-y; background-position: center bottom">
<table>
<tr>
<td width="20"></td>
<td width="200" valign="top" align="center">
<asp:Image ID="Image9" runat="server" width="150" Height="150"
ImageUrl="~/Images/defaultFoto.jpg"/>
<br />
<asp:Button ID="InsertButton2" runat="server" Text="Ladda upp bild" />
<br /><br />
Personlig beskrivning:
<br />
<!--<asp:FormView ID="FormView2" runat="server" DataSourceID="SqlDataSource1" DefaultMode="Insert">
<InsertItemTemplate>-->
<table cellpadding="0" cellspacing="4">
<tr>
<td>
<asp:TextBox ID="txtPersonligPresentation" Text='<%# Bind("presentation") %>' runat="server" Width="175" Rows="6" TextMode="MultiLine"></asp:TextBox>
</td>
<tr>
</tr>
<td align="right">
<!-- LOCATION 3 -->
<asp:Button ID="InsertButton" CommandName="Insert" CausesValidation="True" runat="server" Text="Spara" />
</td>
</tr>
</table>
<!-- </InsertItemTemplate>
</asp:FormView> -->
</td>
<td width="20"></td>
</tr>
</table>
</td>
</tr>
<tr>
<td width="240" style="background-image: url('Images/bottenskugga_Mini.jpg'); background-repeat: repeat-y; background-position: center bottom"> </td>
</tr>
</table>
</td>
</tr>
<tr>
<!-- Botten skuggor -->
<td width="500" height="20" style="background-image: url('Images/bottenskugga_Liten.jpg'); background-repeat: no-repeat; background-position: center bottom">
<table cellpadding="0" cellspacing="0">
<tr>
<td width="20"></td>
<td width="460"></td>
<td width="20"></td>
</tr>
</table>
</td>
</tr>
</table>
</InsertItemTemplate>
</asp:FormView>
</asp:Content>
Is it possible to solve this?
I have question about install both default instance and name instance on to one server. Do I need follow a specific order such as default instance first then name instance?
If my server already has two or more name instances, can I install one more default instance?
Thanks
Hi,
I would like to change the default location where new databases are created.
In Server Management Studio, I right clicked my instance and selected Properties. I selected the Database Settings option and am presented with an option to change the Database Default Location (the location for databases and logs can be changed here). If I change the paths for the DB's and logs, and create a new DB, the new files are saved to the new default location paths that I just entered.
My question is this:
If I change these paths, will my system databases (master, model, msdb, tempdb) still be accessible and usable by SQL server? I don't need (want) to change the location of these files, only all my other databases and logs.
Will this do what I want?
Thanks for the help!
Oliver
When my default.aspx page loads I get this error for the connection to my SQL 2005 DB. An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) I have already gone to Surface Area Configuration to ensure that Remoting with both Named Pipes or TCP/IP is enabled and it's set to both for remoting.I verified that my local account has access to the DB.Not sure what else to check.
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Hi,
I'm getting this error ever since I attached my VWD Express database to SQL Server Express. I detached the database after using it and closed SQL Server but as soon as I tried to run my application again in VWD I got...
Cannot open user default database. Login failed.Login failed for user 'xxxxxxxASPNET'.
I have tried attaching and detaching the database again in SQL Server with the 'Close Connections' check box ticked but still no joy. I have checked out all other posts on this subject but can't seem to find an answer that works for me.
Does SQL Server Express do something to users / permissions when attaching databases? It's all way above my head!
My connection string is as follows...
<add name="DatabaseConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>
Hey,I renamed a database, and it happened to be my default; so I basically screwed myself, because I can't change it through script (doesn't exist or you don't have permissions). What can I do? Thanks.
View 4 Replies View RelatedI have created an app which use sqlserver exrpress and works fine. I have now craeted a authentication page login.aspx.
I have added users successfully to the asp.net configuartion via the web site admin tool.
When I go to login using my page I get the Cannot open default database.Login failed. Login failed for user servetaspnet.
I have looked at the asonetdb in sql server management studio and the serverasp net is set up on the database.
Can anyone suggeste what I ma doing wrong or where I might see a work through of the problem.
Thanks
Frank
Yesterday was not my best day. I disconnected my database to make a copy of it and forgot to reconnect it before closing SQL Server 2000.
Now when I try ot access the database I get message.
Cannot Open User Default Database. Login Failed
Is there a way to attach the database again or a work around for this?
Thanks in advance for your help!
hi to all,
I am new to Sqlserver. in my machine i installed sqlserver2000.i created/registered a new server with sql authentication. but when i connecting it shows the login failed and i am unable to connect my database.after that i edited the server registration information as windows authentication. now it works well. what to do? how to tactic this problem? thanks in advance..