SQL Server 2005 Instance Can't Start With TCP/IP
Oct 8, 2006
I can't get an instance of SQL Server 2005 to start using TCP/IP.
The issue is pretty basic: I have a local SQL Server 2005 that I can get to run and connect to it using Named Pipes.
The problem is that from a remote machine, although I can connect to it using Named Pipes, ASP.NET can't connect to it (when I'm in design mode, I can connect to the SQL server to configure Data Sources, but at run-time, it refuses to work).
So, I tried to switch to TCP/IP. I can't get it to work on the local machine. I get the following errors:
SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
TDSSNIClient initialization failed with error 0xd, status code 0x1.
I've looked up these errors, and most of them are basic "make sure protocols are enabled, make sure VIA is disabled, etc." but those aren't it.
Any ideas?
TIA
jdn
View 7 Replies
ADVERTISEMENT
Jun 1, 2008
moving to a new sql server box because of a problem with the SAN its connected to.
started my named instance in single user mode and restored master. sqlserve.exe -c -m -s ovops
now the instance won't start. tried starting it with the -t3608 switch.. won't start!!
Its because my drive configuration is different on the new server than it was on the old server, I cannot start the instance because it is expecting model, msdb, temdb and all of the user databases on drives that don't exist?? what can I do?????
View 4 Replies
View Related
Nov 15, 2007
The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
Am I mssing something here? Any help much appreciated
Thanks...
View 2 Replies
View Related
Nov 13, 2007
Hi,
I am new to this forum and new to SQL, hope someone can help me. TIA
I have SQL 2000 running on the windows 2000 server. The program reside on the E drive and the data reside on the D drive, my system files drive C got corrupted and gave me the blue screen of death, so I had to reload it from back up, but in doing so, my SQL "Local" default instance fail to load after I got the server back up and running. My other instances are running fine except for the Local. Is their a way to bring that back? or do I have to reload SQL default instance ?
Thanks
View 5 Replies
View Related
Jan 15, 2008
Dear Experts,
I am running a named instance of SQL-Server 2005 SP2 on Win2003 with two local partitions C: and F:
The TCP settings for this instance have ecplicitly been set to use the port 1433.
The config file for SSIS (F:ProgrammeMicrosoft SQL Server90DTSBinnMsDtsSrvr.ini.xml) has been changed to:
<?xml version="1.0" encoding="utf-8"?>
<DtsServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<StopExecutingPackagesOnShutdown>true</StopExecutingPackagesOnShutdown>
<TopLevelFolders>
<Folder xsi:type="SqlServerFolder">
<Name>MSDB</Name>
<ServerName>.INSTNAME,1433</ServerName>
</Folder>
<Folder xsi:type="FileSystemFolder">
<Name>File System</Name>
<StorePath>..Packages</StorePath>
</Folder>
</TopLevelFolders>
</DtsServiceConfiguration>
I have tried different logons (NetworkService, LocalSystem, DomainAdmin).
The service still refuses to start. There is no detailed message in the event log just that the service didn't respond in a reasonable time, doh!
Any help is welcome
Fridtjof
View 1 Replies
View Related
Sep 15, 2005
Hello, PLEASE Help me.I have just installed the Quick Starts on my local machine, and it mentions that you will need a new instance of SQL called (local)/NetSDK.I already have the MS Personal Edition and the tutorials say to download the MS Desktop Engine. So what do i need to do in order to get teh Quick Start samples to work locally???Can i not just use my own instance and use the Grocer and other Databases there???Please Help
View 1 Replies
View Related
Aug 21, 2007
I have an ASP.NET project that uses a ASPNETDB.MDF file. This file is attached with a SQL Server Express everytime when I run the application, include debuging session. There are two debugging modes under Visual Studio 2005, through WebDev.WebServer or IIS. Both ways worked fine with this project until yesterday. Right now, whenever I try to debug it with WebDev.WebServer, it will show me an error:
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
But if I debug it with IIS it works fine. Also, using the same machine and same installation of Visual Studio 2005 I can debug another project with WebDev.WebServer, that also uses a .mdf file (a different file). So, seems to me I jsut have problem with one mode and one project. The only thing that I did yesterday that I think may be relevant was that I reinstalled Visual Studio 2005 SP1 to fix another issue. Anyone has an idea? Thanks!
View 3 Replies
View Related
Dec 1, 2005
Windows XP, SP2; MSDE 2000 Release A - on some installs of the XP SP2 MSDE installation fails, the section of the install log that applies is:
View 3 Replies
View Related
May 30, 2006
Hi,
I can't find an equivalent version of 2000's Service Manager with which to start the DB server.
Management Studio is only showing my SQL Server 2000 databases.
Cheers, WT.
View 1 Replies
View Related
Jan 16, 2008
Hi;
I've been using SQL Server 2005 on vista and everything was fine until today. I cannot start the SQL Server service from the services list; it gives the error "Windows could not start the SQL Server (MSSQLSERVER) on Local Computer....., and refer to service-specific error code -2146885628.". I looked at the evet log; the first error message is "FallBack certificate initialization failed with error code 1." then an information message: "Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.".
I've created many test certificates till now (to test WCF services security features) using makecert.exe and nothing went wrong; the last certificate I made was named "localhost"; so I thought there's a problem because of that; I deleted that certificate but still cannot start SQL Server.
Any help is appreciated. Thanks
-AA
View 9 Replies
View Related
Mar 21, 2006
Hi I need an answer to this:
I just downloaded and installed SQL server 2005 CTP.
When I start the MS SQL server database Engine it returns this error:
TITLE: Surface Area Configuration for Services and Connections - localhost
An Error occurred while performing this operation - (SQLSAC)
Program Location:
at Microsoft.SqlSac.MainPanel.UserControlService.ActOnService(ServiceAction action)
Can you please tell me how to fix this?
Poek
View 8 Replies
View Related
Apr 11, 2008
Hello,
I have problem with starting SQL Servre 2005 (Standard Edition), during start I get bellow errors.
----------------------------------------------------------------------
Error:
Could not start the SQL Server (SQL2005) service on Local Computer.
Error 14001: This application has failed to start because the
application configuration is incorrect.
Reinstalling the application may fix this problem.
--
Event Viewer:
Event Source: Service Control Manager
The SQL Server (SQL2005) service failed to start due to the following error:
This application has failed to start because the application configuration
is incorrect.
Reinstalling the application may fix this problem.
Event Source: SideBySide
Generate Activation Context failed for
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnsqlservr.exe.
Reference error message: The referenced assembly is not installed on your
system.
Event Source: SideBySide
Resolve Partial Assembly failed for Microsoft.VC80.ATL. Reference error
message:
The referenced assembly is not installed on your system.
Event Source: SideBySide
Dependent Assembly Microsoft.VC80.ATL could not be found and Last Error was
The referenced assembly is not installed on your system.
----------------------------------------------------------------------
Could you help, how resolve problem. I don't want reinstall all SQL Server.
This probably happened after Windows install (automatic) updates from
Windows Update web site.
Thanks in advance
ps.
Windows 2003 Enterprise Edition
--
Regards,
anxcomp
View 4 Replies
View Related
Jun 18, 2008
Hi ,
looking for a good link to start with sql server 2005 , could anybody suggest one.
thanks
bcj
bennichan
View 4 Replies
View Related
Mar 28, 2008
Hello all, just registered on this site.
I have been running mssql 2005 and mssql 2000 on the same machine with no issues for a couple of months.
For some reason after a reboot the service is saying "Starting".
I can't stop it.
I am fairly new to sql server and any help would be appreciated. If you need more info (logs etc) let me know and I'll grab any info required.
Thanks in advance.
sean
View 2 Replies
View Related
Jun 1, 2006
I just installed SQl Server 2005 on my Windows XP Pro system. But I can't figure out how to start the Database Engine. In the MS SQL Server Management Studio I see one Database Engine, but not SQL Servers. If I do "Update Local Server Registration" nothing happens. If I do right-click "New Server Registration" I get a databse icon with a white open circle. If I the try "right-click, Connect, Object Explorer" I get "An error has occurred while establishing a connection to the server...". All this time the right Summary pane is showing "No Server Connection."
The tutorials are no help and do not function as they describe.
Sample databases install but do not show up in program list as they are supposed to.
How do I start up my SQL Server Database Engine with a new database?
Why do none of the tutorials show you what to do?
Assistance would be greatly appreciated.
View 10 Replies
View Related
Dec 13, 2007
SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.
Here is the error in Event log
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 12/13/2007
Time: 8:25:59 AM
User: N/A
Computer: XXXXXXXXXXX
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Here is i found in log files
ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)
View 1 Replies
View Related
Jun 22, 2007
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
---- Context -----------------------------------------------
Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS
Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
Any idea how I can fix this?
View 1 Replies
View Related
Sep 9, 2006
i have SQL Server 2005 Workgroup Edition
how to connect to it from vb.net 2005 because i try but no use
thanks in advance.
View 4 Replies
View Related
Jul 18, 2007
Hello,
I have installed SQL server 2005 enterprise edition on Windows 2003 virtual PC (full installation). The installation went through successfully. However, after install completed, I cannot find any of the client tools under the start menu -> all programs -> Microsoft SQL server 2005 menu. The only item listed under the SQL server 2005 is Configuration Tools, which is used to configure the database server.
I have tried to install the client component again (in case I didn't install them at the first place) but the installation process cannot be started since it detected that the client components have been installed already. I can also see the sql server native client running in the services.
The server engine is working fine since I can connect to that sql server using another machine where I have the client tool (SQL server management studio).
One of my friends has exactly the same problem. He installed the sql server 2005 Standard edition on windows 2003 server (full installation), but the client tools are not showing up in the start menu either.
I also checked the location for the SQL server management studio (Microsoft SQL server/90/Tools/Binn/VSShell/Common7/IDE), there is only one folder called publicAssemblies listed under. Is this correct or something is missing?
Thanks
View 11 Replies
View Related
Sep 19, 2006
Hi,
I am trying to install a new SQL Server 2005 instance. When running the
setup I get a warning related to "Edition Change Check" that advises
me to run setup with SKUUPGRADE=1. I already have SQL 2005 with SP 1 installed.
For the new instance that I am trying to install I use the SQL Server 2005
media without sp1. What do I do? Ignore the warning and at the end reapply SP1?
Thanks
View 2 Replies
View Related
Jul 16, 2007
Dear All,
I am not able to start the sql server 2005 database engine services...
Sql server 2005 server is installed in one machine(SERVER) and we have 10 client machine connecting to the server
When i try to start the service from the Service.msc in the SERVER i am getting the following error
===================================
Cannot connect to KEYSKILL.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
------------------------------
Error Number: 2
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Could any one help me to resolve the error
Thanks in Advance
Lalitha
View 6 Replies
View Related
Feb 28, 2006
Hi all,
I am new to SQL server. I just installed SQL Server 2005 enterprise edition .
I have not more experience in SQL but I need some tutorial about how to use SQL Server 2005 and create tables and make queries and relate tables . I can't find any exact location in Microsoft website about SQL Server enterprise edition and documentation where i can find beginner's resources. which feature we use for creating the tables and other features for making the database.
Can anyone please give me the location.
Thanks
View 1 Replies
View Related
Feb 28, 2006
Hi all,
I am new to SQL server. I just installed SQL Server 2005 enterprise edition .
I have not more experience in SQL but I need some tutorial about how to use SQL Server 2005 and create tables and make queries and relate tables . I can't find any exact location in Microsoft website about SQL Server enterprise edition and documentation where i can find beginner's resources. which feature we use for creating the tables and other features for making the database.
Can anyone please give me the location.
Thanks
View 1 Replies
View Related
Feb 22, 2007
Ran the SP2 locally on a Windows Server 2003 SP1 box that had SQL Server 2005 SP1 install on it. Problem was I ran out of C: drive and it failed in the middle of upgrading the server.
I'm unable to start the SQL Server at all now. Is there any way to back this out? Don't think I can reapply any patches since the service is dead.
Eventlog now shows:
One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
The log shows it's unable to start SQL (blames it on permisions but it's because SQL can no longer start)
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29538
Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmssqlsystemresource1.mdf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
I'm guessing its reinstall time but not sure how the attached databases will like that idea.
Thanks in advance for any ideas.
View 6 Replies
View Related
Jun 2, 2007
when i try to start SQL SERVER 2005 its give me this ERROR MESSAGE:
"The service did not respond to the start or control request in atimely fashion ,you need administrator privileges to be able to start/stop this servic.(SQLSAC)"
Notes: am login in as system administrator with full previligies,
its was work normally ,but after i made update for windows then this error hapen after windwos repair.
View 1 Replies
View Related
Mar 21, 2008
Hi, everyone!
I faced the problem trying to adjust ssl encryption in ms sql server 2005.
I've completed all steps from this article:
http://msdn2.microsoft.com/en-us/library/ms191192.aspx
But when I'm trying to restart sql server - it fails to start.
Here the error messages I got:
1. Unable to load user-specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
2. TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
3. TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
4. Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
5. SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
SQL Server is installed on Windows 2003 Server OS running computer.
I use certificate created by means stand-alone Certificate Authority that appeared in Administration Tools on that computer after I installed Certificate Services.
I guess the reason is in wrong certificate parameters I set while requesting.
How can I determine correct certificate parameters? Does anyone know?
Any help is appreciated,
Thanks
View 4 Replies
View Related
Jun 2, 2007
when i try to start SQL SERVER 2005 its give me this ERROR MESSAGE:
"The service did not respond to the start or control request in atimely fashion ,you need administrator privileges to be able to start/stop this servic.(SQLSAC)"
Notes: am login in as system administrator with full previligies,
its was work normally ,but after i made update for windows then this error hapen after windwos repair.
View 1 Replies
View Related
Nov 16, 2006
Hi All,
I have two drive, C and D. When first time I installed SQL Server 2005, I think that I point to C drive which is having only 10 GB, instead of drive D which has bigger space. Now, I have a problem of restoring my database due to lack of space on my C drive. Can anyone guide me to change the instance of database from drive C to drive D.
TIA
View 3 Replies
View Related
Nov 27, 2007
I have access to a server with sql server 2005 workgroup edition. It runs an instance of sql server for this huge application we use. I would like to create a new instance of Sql server 2005 so I can play around with it and learn how to use the 2005 version. How can you create a new instance? I want this instance to run alongside the current instance. I can't find out how to do this anywhere. I'm sure it's possible though. Thanks
View 3 Replies
View Related
Mar 21, 2008
Hi
I just need some information on creating the second instance in sql server 2005. In my production server we have the databases with different collation. we need to separate those two different collation databases by creating the new instance. I have to create the instance by this afternoon. I think we need to install the sql server 2005 again and select the option of named instace. As long as this is production server are databases are going to be available for the users while installing the sql server to create the different instance? Could some one please respond on this. Thanks!
View 11 Replies
View Related
Sep 12, 2007
I need to rebuild master on an instance of SQL 2005. The instance was installed incorrectly and would like to rebuild the instance with the proper collation. I know the command to rebuild (below), but I'm not sure what to put in for the collation. The collation needs to be:
Dictionary order, case-insensitive, uppercase preference for use with the 1252 Character set
Here is the command: setup.exe /qn INSTANCENAME=QNXT REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=******* SQLCOLLATION=<NewSystemCollation>
What do i place in the <NewSystemCollation> in order to get the collation above installed?
View 3 Replies
View Related
Mar 9, 2008
OS: Windows 2003 Server Enterprise Edition
SQL Server: SQL Server 2005 Enterprise Edition (2 instances)
SQL Server : SQL Server 2000 Enterprise Edition ( 1 instance)
Problem:
2nd instance of sql server 2005 installed and service pack 2 applied
when using SS Mangement Studio I get the error:
Cannot connect to <ServerName>MSSQL2K5_2.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
------------------------------
Error Number: 10060
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Open MyComputer
Services & Applicaitons | Services
SQL SERVER (<SERVER NAME> MSSQL2K5) STARTED
SQL SERVER (<SERVER NAME> MSSQL2K5_2) STARTED
SQL AGENT (<SERVER NAME> MSSQL2K5) STARTED
SQL AGENT (<SERVER NAME> MSSQL2K5_2) NOT STARTED
Application Event Log
SQLServerAgent could not be started (reason: Unable to connect to server 'BLUESTONEMSSQL2K5_2'; SQLServerAgent cannot start).
SOURCE: MSSQL%MSSQL2K5_2
Server is listening on [ 'any' <ipv4> 2777].
DAC is listening on [ 'any' <ipv4> 2778]
<SQL ERROR LOG> AND <APPLICATION EVENT LOG ENTRY>
The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service.
Error: 0x54b, state: 3.
Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos.
This is an informational message.
Further action is only required if Kerberos authentication is required by authentication policies.
CONFIGUATION MANGER
Alias is configured with correct port. (2777)
Protocol TCP/IP
View 2 Replies
View Related
Apr 29, 2007
I'm new to SQL Server, and have just started to work through the MS Press ADO.Net 2.0 Step-by-Step book.
In the beginning of the book, at the point where the Add Connection box comes up, it says to type in the Server Name text box, (local)SQLEXPRESS, as the book takes for granted you have SQL Express installed, and hence this is the instance name.
I have Visual Studio 2005 Professional, and SQL Server 2005 Standard installed. What would the instance of SQL Server be in this case?
Any hope would be greatly appreciated.
View 33 Replies
View Related
