I uninstalled SQL Server 2005 through "Add or Remove Programs". Apparently I did something wrong. The files are gone, but when I try to reinstall, the installer says SQL Server already exists, and won't install. When I go to the Configuration Manager, it shows all the components, but not of the services are started - or will start. How do I clean this up without wiping my drive and reinstalling my OS?
Hi,I’m having a problem uninstalling SQL Server 2005. I went into add/remove programs,clicked on each of the entries for all of the associated services to remove them,then removed SQL Server 2005, rebooted, and the tasks are still listed in services.There are no entries in add/remove programs.I’m removing SQL Server in order to install Visual Studio first - I’ve still gota problem with the “Package Load Failure” that I posted about last week:http://forums.asp.net/thread/1402873.aspxCan anyone give me a clue as to how I can completely remove SQL Server?I’m running Win 2k SP4.Thanks!
View 4 Replies View RelatedHi all,Afetr a bad install of sql server 2005 which failed due to WMI problem; something that seems unfixable save a reinstall of windows.I am now left with a part installion of sql server 2005. From add/remove programs clicking 'remove' activates nothing as does change. However the files are there in program files.At start up I get multiple fatal errors etc.Does anyone know how I can unistall SQL server 2005 completely - perhaps from the command line?Or..how could I stop SQL server from trying to start at start up?All help most appreciated.TFM
View 1 Replies View Related???
View 1 Replies View RelatedI am new to SQL Server 2005. I want to uninstall the Standard version, for now, and install the Express version.
In my un-install of SQL Server 2005 I have managed to end up in a situation where I can't completely un-install, nor can I
re-install. I get a 1635 error message when attempting to install and I get the following message at system startup time:
Your SQL Server installation is either corrupt or has been tampered with(could not open SQLEVN70.RLL)
Please uninstall then re-run setup to correct this problem.
Assistance in resolving this would be deeply appreciated.
If I try to uninstall my SQL Server 2005 I nead to have instaled SqlSupport.msi in my list programs and I don't have it.
Then I found it in a folder "...ServersSetup" but it dosen't work. I can't install that program and if it's already instaled I can't see it in my list programs.
What can I do?
how to uninstall SQL Server 2005?
View 1 Replies View RelatedI have been trying to uninstall SQL Server (Enterprise Edition) from one of our development boxes and the programs bombs out. When I looked in the log file, I see the following error message which is useless needless to say. Has anyone come across this issue? How did you resolve it? Thanks in Advance.
=== Verbose logging started: 2/11/2008 9:38:35 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (98:C8) [09:38:35:385]: Resetting cached policy values
MSI (c) (98:C8) [09:38:35:385]: Machine policy value 'Debug' is 0
MSI (c) (98:C8) [09:38:35:385]: ******* RunEngine:
******* Product: {EB76B218-8FC5-41DF-9F1F-7FF3E0448383}
******* Action:
******* CommandLine: **********
MSI (c) (98:C8) [09:38:35:385]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (98:C8) [09:38:38:376]: Failed to grab execution mutex. System error 258.
MSI (c) (98:C8) [09:38:38:376]: Cloaking enabled.
MSI (c) (98:C8) [09:38:38:376]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (98:C8) [09:38:38:391]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (98:C8) [09:38:38:391]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (98:C8) [09:38:38:391]: MainEngineThread is returning 1618
=== Verbose logging stopped: 2/11/2008 9:38:38 ===
Hello
after uninstall SQL server 2005 by tools (vs_uninst_betas) still exist in program menu.
How can uninstall definetly.
Thanks you.
Hello,
I am trying to uninstall Sql Server 2005 Beta in order to upgrade to
the Sql Server 2005 Enterprise Edition but without success.
Here is what I have already done:
I had VS 2005 2.0 Beta and Sql Server 2005 Beta installed. I wanted to
upgrade to the Professional Editions so I uninstalled VS 2005 2.0 Beta
and Sql Server 2005 Beta from Add/ Remove programs.
I have successfully installed VS 2005 Professional Edition but when I
try to install Sql Server 2005 it gives me an error saying that SQL
Server 2005 has detected incompatible components from beta versions of
Visual Studio, .NET Framework, or SQL Server 2005.
Please advise.
Thank you.
-Arpit
i need help for completely removing sql server 2005 from my computer,in order to reinstall it again.
please help me
Hi,
I had to do a system restore to solve some other issues now my SQL Server 2005 doesnt work (SQL Server 2000 on the same machine [diffrent instance] does). I have tried to uninstall with add/remove programs but the instance doesnt appear there. I have tried to use the 'ARPWrapper.exe /Remove' command as described in KB909967 wich also fails.
I have also tried to reinstall with no sucess. I also tried uninstalling SQL2000 and removing as many references as I could find, again now joy.
Is there a script somewhere to remove everything (although I would like to try and keep the SQL2000 instance)?
My SQL Server 2005 Beta has expired and I want to unistall it. When I try, it tells me I need to have .NET framework 2.0 before I can run setup. I do have .NET 2.0. And I uninstalled it and reinstalled it and I still get the error from SQL Server when I try to unsintall. This error is pissing me off and this stupid beta is taking up almost a gig of space. HELP.
View 1 Replies View RelatedHi,
View 3 Replies View RelatedLong story short: Installed SQL Server 2005 Developers Edition along with Visual Studio 2005. Everything worked as it should.
Then there was a problem installing .NET Framework 2.0 Security Update. Fixed that by uninstall and reinstall of .NET Framework 2.0.
Now SQL Server does not work. So I figured uninstall/reinstall. Only problem is that it WILL NOT uninstall. I have tried to uninstall manually per KB article (9009967). That doesn't work either.
The error info that I'm geting is:
LinkID: 20476
Product Name: Microsoft SQL Server
Product Version: 9.00.2047.00
Message source: setup.rll
Message ID: 50000
EvtType: stateengine
esourcemodule.cpp@ScheduleActionAction@sqls::ResourceModule::LoadStringW@0x716
I get the same data during setup or uninstall. Neither of which completes.
Needless to say this is driving me nuts. I'm trying to learn VB.NET programming and many of the examples use SQL Server.
Any help would be appreciated.
Hello All.
I have a failed sql cluster setup on Windows 2003 OS cluster. sql will not uninstall on node 1 because it says the group name was not specified in the template.ini file for the cluster. The OS cluster nodes have been evicted from the cluster. The OS cluster is no longer available to provide a group name for.
SQl uninstall process process is failing because of the error mentioned above.
I want to completely , uninstall SQL server from both nodes,
clean up Windows Server and install just a default instance of SQL server on just one of the machines, The cluster can wait.
Thanks.
This is getting extremely annoying. I cannot unistall another instance of SQL Server Express 2005.
I have had three different servers with the separate installs of SQL Server Express 2005. I remove the product (Backup Exec, Dell IT Assistant, Microsoft System Center 2007). I uninstall the third-party product and they leave behind SQL Server Express 2005. For what idiotic reason I do not know. Then I try and remove SQL Server Express 2005 and for the third straight time it fails.
Here's the latest failure error, "TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=1603&EvtType=sqlca%5csqlcax.cpp%40SetInstanceProperty%40SetInstanceProperty%40x534
------------------------------
BUTTONS:
OK
------------------------------
Does anyone know how to actually remove SQL Server Express 2005? This is pathetic.
Hi.
I'm trying to perform a silent install/uninstall of SQL Server 2005 Express.
I manage to install silently, but when trying to uninstall with the following command line:
sqlexpr.exe /qb REMOVE=ALL INSTANCENAME=<INSTANCENAME>
there is one item left behind - "Microsoft SQL Server Native Client"
Does anyone know how to uninstall this as well?
Also, if MSXML 6.0 is already installed when installing SQL Server 2005 Express, when performing an uninstall with the above command line, MSXML 6.0 is also uninstalled, which may not be the desired outcome.
When I try to un install SQL Server Express (VS 2005 Beta 2), which is not functional, I get an error message:
View 5 Replies View RelatedOk, I have tried everything I can think of, but I am still getting errors to do with SQL server 2005 beta. Since the beta expired on all the VS.net 2005 I thought it would be a good idea to uninstall the lot to save some hard disk space...how wrong I was!!
View 4 Replies View RelatedAfter going through "Add and Remove Programs" and removing all components of SQL Server 2005 Standard Edition on my desktop I get an error telling me there is a copy already installed and to remove it before continuing. Well nothing shows up under "Add and Remove Programs"; Windows cleanup shows none of the SQL Server components; a check of the register (HOTKEYS.../unistall) have no SQL Server entries; under services all SQL Server services are disabled and not running.
I have followed all the steps in http://support.microsoft.com/kb/909967 (Describes how to uninstall an instance of SQL Server 2005 manually).
Anyone out there got a solution? (Visual Studio 2005 eval is loaded on the box)
Now i already remote all the SQL's related at the "Add or Remote Programs" there. But inside the "Services" there still consist the SQL Server,SQL Server Active Directory Helper,SQL Server Agent, SQLServer Analysis Services,SQL Server Browser,SQL Server FullText Search,SQL Server InteGration Services and SQL Server Roporting Services.
And inside the Start menu >All programs > Microsoft SQL Server 2005 still have the "Configuration Tools" Folder.
And in the C:Program FilesMicrosoft SQL Server still have a lot of thing inside there.
Can anyone teach me how to finish the uninstall? because i plan to uninstall the SQL and reinstall it again.
Thanks in advance...
Hello All:
On my backup server running Symantec BackupExec 11D, I wanted to install Service Pack 2 for SQL Server 2005 Express. I started performing the update using "Windows Update", but cancelled the upgrade process just before it started to install (right after the downloading/verifying download phase of Windows update).
Now when I try to find the SP2 update using Windows Update, it doesnt show up on the update website. Rebooting the server doesnt help. I manually downloaded the file for SQL 2005 Express SP2 and tried installing it, but it says "the component is already installed" and I have to exit the process.
BackupExec 11D is running fine as of now, and it might not face problems later.. but I am not sure. Is there any way to uninstall SP2 and re-install it again!??
Any guidance/pointers is greatly appreciated!
Thanks a lot in advance.
I am having trouble installing SQL Server 2005 Express. I was told to uninstall and reinstall clean but now SQL Server does NOT show in the Add/Remove Program list but when I try to install, my system says I already have SQL Server installed. I get error messages every time. Any ideas???
View 2 Replies View RelatedHi,
I had to remove AD from win server 2003 after that I didn't have any SQL to uninstall in Add or remove programs folder.
Is there any other way to uninstall SQL Server?
best rgds - timppa
Hi,
I have installed a copy of the SQL Server 2005 Developer Edition a few months ago. Two weeks I tried to apply SP2 and I got an error, and I thought a clean install would solve the problem. So, I went ahead to do the uninstall but I am not able to get pass MsDtsSrvr.exe as shown in the log below,
07/09/07 09:36:47 DDSet_Status: LANGID: 1033
07/09/07 09:36:47 DDSet_Entry: BeginTransaction started
07/09/07 09:36:47 DDSet_Status: LANGID: 1033
07/09/07 09:36:47 DDSet_Entry: CMsHelpObject constructor
07/09/07 09:36:47 DDSet_Status: LANGID: 1033
07/09/07 09:36:47 DDSet_Entry: CHelpCrypto constructor
07/09/07 09:36:47 DDSet_Exit: CHelpCrypto destructor
07/09/07 09:36:47 DDSet_Status: BeginTransaction()->IHxRegisterSession::CreateTransaction() returned 0.
07/09/07 09:36:47 DDSet_Status: BeginTransaction()->PostponeTransaction returned 0.
07/09/07 09:36:47 DDSet_Status: BeginTransaction()->Registration session {E0A41F96-7231-4AE8-A654-EEB34F935462} was successfully created.
07/09/07 09:36:47 DDSet_Exit: CMsHelpObject destructor
MSI (s) (D0:A8) [09:36:47:609]: Executing op: ActionStart(Name=Undo_NativeImage.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing Native Images,Template=Assembly: [1])
07/09/07 09:36:47 DDSet_Exit: BeginTransaction ended
MSI (s) (D0:A8) [09:36:47:609]: Executing op: CustomActionSchedule(Action=Undo_NativeImage.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1089,Source=BinaryData,Target=Undo_NativeImage,CustomActionData=000Removing Native Images0C:Program FilesMicrosoft SQL Server90DTSBinnMsDtsSrvr.exetrueC:Program FilesMicrosoft SQL Server90DTSBinnMicrosoft.SqlServer.DtsServer.Interop.dlltrue)
MSI (s) (D0:0C) [09:36:47:641]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI26E0.tmp, Entrypoint: Undo_NativeImage
<Func Name='LaunchFunction'>
Function=Undo_NativeImage
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Undo_NativeImage
PerfTime Start: Undo_NativeImage : Mon Jul 09 09:36:47 2007
<Func Name='Undo_NativeImage'>
Executing External Command: ngen.exe uninstall "C:Program FilesMicrosoft SQL Server90DTSBinnMsDtsSrvr.exe" /verbose
Hope someone could tell me what could have caused this problem.
Thanks!
KC
KC
I get an error message when trying to uninstall the SQL Server Express 2005 Tools. It reports,
View 7 Replies View RelatedTried to uninstall SQL Server 64-bit on Windows 2003 remotely. All components uninsntalled properly except Reporting Services.
The log file lists the following error -
/*****
ReportingServicesService!library:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
*******/
Now I cannot see Reporting Services under Add/Remove programs (ARPWrapper.exe /remove). It is also not displayed when using Windows Installer Cleanup Utility (msicuu2.exe). I can start the default instance of RS via Reporting Services Configuration manager and it can also be also started under Windows Services. BTW, the IIS folder structure is under the default website for Reports and ReportServer is present.
So, now how do I go about uninstalling SQL Reporting Services when I cannot see it (as an installed program) without rebuilding the machine ?
Thank you.
Adeaweb
Tried to uninstall SQL Server 64-bit on Windows 2003 remotely. All components uninsntalled properly except Reporting Services.
The log file lists the following error -
/*****
ReportingServicesService!library:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
*******/
Now I cannot see Reporting Services under Add/Remove programs (ARPWrapper.exe /remove). It is also not displayed when using Windows Installer Cleanup Utility (msicuu2.exe). I can start the default instance of RS via Reporting Services Configuration manager and it can also be also started under Windows Services. BTW, the IIS folder structure is under the default website for Reports and ReportServer is present.
So, now how do I go about uninstalling SQL Reporting Services when I cannot see it (as an installed program) without rebuilding the machine ?
Thank you.
Adeaweb
I have Microsoft SQL Server 2005 Express Edition Toolkit installed but there is something from with the installation since every time that I try and create a Report Server Project It gives me error
Could not load file or assembly "Microsoft.ReportingServices.Designer, Version 9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannopt find the file spesified.
How can I reinstall it or repair the installation so it will work. I have uninstalled every SQL2000 component in Add Remove Programs and reinstalled them. The problem is however that I cannot see an entry for "Microsoft SQL Server 2005 Express Edition Toolkit" in the Add Remove programs in Windows XP Profesional.
Can someone please help me. Maybe tell me where the uninstall file is located on disk??
Any help will be great
Manu Thanks
I tried to uninstall SQL Server 2005 and it was failed.
I tried to install SP2 for SQL Server 2005, and it was failed too!
Here are the log file SUMMARY.TXT (is it enough?).
Can anyone tell me what the problem is?
Time: 05/17/2007 16:51:41.483
KB Number: KB921896
Machine: XXXXXX
OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 1 (Build 3790)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
/quiet
/allinstances
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Express Database Services (SQLEXPRESS) ENU RTM 2005.090.1399.00 x86 EXPRESS
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Express Database Services (SQLEXPRESS)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : D:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9Express_Hotfix_KB921896_SQLEXPR.EXE
SQL Express Features : SQL_Data_Files,SQL_Engine,SQL_Replication,SQL_SharedTools
Error Number : 1332
Error Description : *** Shared String ID 1332 Not Found ***
----------------------------------------------------------------------------------
**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 1332
Hello
I have been following this document to uninstall SQL 2005 for a virtual server: http://support.microsoft.com/kb/909967 and when following this step:
start /wait msiexec /x GUID /l*v c:sql_uninstall.log for the SQL Server 2005 GUID I get the following error:
'This installer package could not be opened. Verify that the package exists and that you can access it'.
There also is not a sql_uninstall.log file on the server.
All other components have uninstalled successfully using Add/Remove Programmes apart from the database engine which gets the below error:
'The set up has encountered an unexpected error while setting internal properties. The error is: Fatal error during installation.'
Any ideas?
Thanks
I recently re-built my entire system from ground up (new hard drives, OS, etc). I now have the problem of SQL 2005 installed partially, but no way to get the management tools installed. I get an "already installed message when I try". I've never encounted this before on any other SQL install.
Sequence of events. I installed VS 2005 Pro first, then followed by SQL 2005. Somewhere this install didn't work, and I was left with the MS installed thinking I suceeded, yet none of the functions of SQL were worked or more importantly accessable.
I tried to re-install after using the ADD/Remove App from the control panel (which was sucessfull). SQL thought it was still installed. So I uninstalled VS 2005 as well, and deleted any programs in the SQL directory. Then I checked ADD/Remove programs and nothing was showing. The re-install still did not work. My guess is that the registry is still loaded with now useless entries.
Is there any solution left that does not require me to hand delete any SQL registry entries, since that is always a great way to completely kill my system.
Thanks.