I am trying to call a stored procedure into report builder. The stored procedure has 2 parameters. When I run the report with allowing nulls and blank value in the parameters it works fine, but when I enter a value in a parameter it ignores the where clause I had in the original query(stored procedure) and displays everything.
View 3 RepliesI've tried to find this documented on the Internet and found Crystal Reports User's Guid online documentation (582 pages of it!) It looks like it will be helpful for my other questions, but what I'm trying to do right now is call a stored procedure from my crystal report. So in Field Explorer under Database Fields my stored procedure is there with the three columns it selects. How do I put these three columns on my report? I try dragging them to Section 3 details and they're there but when I preview the report all I get are the headers, not the records. Is there something else I need to do? It requires an input parameter which I am not getting prompted for - maybe that is my problem, without an input parameter it can't successfully run the stored procedure, so how do I make it prompt me?
Thanks for helping me with my first Crystal Report!
I have a CLR stored proceudure than runs under 2 or 3 mins when run in management studio. But when the report calls the same SP, it runs in around 30 mins and the CPU usage goes to 90 or 100% and the sqlserver service uses massive amount of memory. Previously the report worked fine, only after made a few data driven subscriptions and redeployed the reports with minor changes that it began to happen.
Please help--Iam stumped.
There are no infinite loops in the report. I checked.
Details :
Reporting Services 2000, SQL 2000 database, Visual Studio . Net 2003
In Report Design view
In "Data" tab, I can see records for column 'sRCName' returned from the stored procedure(usp_GetRouteCodeData) after clicking '!' icon. When I moved to "Preview" tab, I am getting below error message.
"The value expression for the textbox €˜sRCName€™ refers to the field €˜sRCName€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope."
Observation : there is no value returned from the dataset on 'Fields' panel. The SP is accessing a table called tblRCM.
If I go to the Data--> Dataset --> Query, change the "Command Type" from 'Stored Procedure' to 'Text' and entered
select * from tblRCM at Query string area, the report is running fine.
Issue: This issue only happens at my laptop, my team member can create the same report using the same stored procedure without any error. The database is sitting on a server.
In the troubleshooting process, I tried to create a simple report by calling a stored procedure(CustOrderHist) from NorthWind DB in my local SQL server, I am able to see the data/value in 'Fields' panel and sucessfully view the data in 'Preview' tab.
Looks like the issue only happen on my machine, for a report that using stored procedure to access a DB sitting on a server.
I hope to hear from anyone who have encountered the similiar issue before, or, have any clue to resolve the issue.
Thanks.
I have a stored procedure that takes a date range and returns all the sales in that date range. I'm trying to create the report model for ad-hoc reporting. When I go to create the dataset view, it only lets me select tables or views.... how do I get around this?
View 2 Replies View RelatedSetup: I have a C# 2.0 class library that contains certain business logic that is to be triggered by certain database states. There is a trigger that calls a stored procedure that is working properly (i.e. the stored procedure is being executed). Problem: I have not yet figured out how to call the dll from the stored procedure. Does anybody have any tutorials they could point me to or any advice to point me in the right direction? Thanks in advance for any help.
View 2 Replies View RelatedHi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
SQL Server 2012 Standard SP 1.
Stored procedure A calls another stored procedure B. Rowcount is set properly in called procedure B, but does not seem to return it to calling procedure A. Otherwise the two stored procedures are working correctly. Here is the relevant code from the calling procedure A:
declare @NumBufferManagerRows int = 0;
exec persist.LoadBufferManager @StartTicks, @EndTicks, @TimeDiff, @NumBufferManagerRows;
print 'BufferManagerRows';
print @NumBufferManagerRows;
Print statement prints @NumBufferManagerRows as 0.
Here is the called stored procedure B:
CREATE PROCEDURE [persist].[LoadBufferManager]
-- Add the parameters for the stored procedure here
@StartTicks bigint,
@EndTicks bigint,
@TimeDiff decimal(9,2),
@NumRows int OUTPUT
[Code] ...
Goodday.
I have finally been able to create a connection from Access to the SQL 2005 Server and was able to call a stored proc (in Server) in the following way
Code Block
Dim cnn As New ADODB.Connection
Dim cmd As New ADODB.Command
Dim rst As New ADODB.Recordset
cnn.ConnectionString = "Provider='sqloledb'; Data Source='Private';" & _
"Initial Catalog='DBName';Integrated Security='SSPI';"
cnn.Open
cmd.ActiveConnection = cnn
cmd.CommandText = "sp_DefaultEntityData"
cmd.CommandType = adCmdStoredProc
Set rst = cmd.Execute
rst.MoveFirst
Do While Not rst.EOF
lstEntity.AddItem (rst.Fields(0)), 0
'lstEntity.AddItem (rst.Fields(1)), 1
rst.MoveNext
Loop
The Stored Proc is as follow:
Code Block
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_DefaultEntityData]
AS
BEGIN
SET NOCOUNT ON;
SELECT tblEntities.[Name], tblEntities.PrimaryKey
FROM tblEntities
ORDER BY tblEntities.PrimaryKey;
END
The table contains 24 entries
As you can see in the VB code, I am trying to read the returned "table" into an Access ListBox. The listbox should display the entities Name but not the Primary key, but the primary key should still be "stored" in the to so that it can be used to access other data.
I have moved the tables from Access to SQL Server 2005, and would also like to port all the sql queries to sp's in SQL Server. The old way for populating the listbox was a direct SQL query in the RowSource property field. I have tried to set the lstEntity.RowSource = rst but it did not work.
Here are my Q's:
1) As what does the SP return when it is called and is there a better way to catch it than I am doing at the moment?
2) How do I read the values into the listbox, without displaying the primary key in die box?
Thank you in advance!
Any help is very much appreciated.
I have created a new SSRS Server and done all of the basic security setup for the site but I am having trouble with client machine access...At first I had an issue with being able to access report manager from any client and ended up having to shut off windows authentication on the client IE settings to get it to work. Now I am trying to run Report Builder from a client machine and it will not download. The client machine is on the same domain and my user id is set as an administrator within SSRS and as a local admin on the 2008 server.Â
I had the thought that without windows auth in the browser maybe it can't permit me access to the application but if I turn it on I can't get to it to download it. I have set Full Control rights to the folder as well. Most of the info out there is for 2005 and that uses IIS to host the pages where as 2008 does not. Here is the details of the error:
PLATFORM VERSION INFO Windows    : 6.1.7600.0 (Win32NT) Common Language Runtime  : 2.0.50727.4927 System.Deployment.dll   : 2.0.50727.4927 (NetFXspW7.050727-4900) mscorwks.dll    : 2.0.50727.4927 (NetFXspW7.050727-4900) dfdll.dll    : 2.0.50727.4927 (NetFXspW7.050727-4900) dfshim.dll    : 2.0.50727.4927 (NetFXspW7.050727-4900)
[URL] ....
Hi,
When i select datasource in Report Builder, i am able to see all the available DataSources.
Eg: I have selected one datasource from the list and which has 3 tables(table1, table2, table3) associated to that datasource.
when i drag and drop table1 fields to report, i am not able to see the other 2 tables(table2 & table3)
Is there any property or relationship do i need to maintain?
Thanks,
SR.
Hi,I'm tring to call a stored procedure i'v made from a DNN module, via .net control.When I try to execute this sql statement: EXEC my_proc_name 'prm_1', 'prm_2', ... the system displays this error: Could not find stored procedure ''. (including the trailings [".] chars :)I've tried to run the EXEC statement from SqlServerManagement Studio, and seems to works fine, but sometimes it displays the same error. So i've added the dbname and dbowner as prefix to my procedure name in the exec statement and then in SqlSrv ManStudio ALWAYS works, but in dnn it NEVER worked... Why? I think it could be a db permission problem but i'm not able to fix this trouble, since i'm not a db specialist and i don't know which contraint could give this problem. Also i've set to the ASPNET user the execute permissions for my procedure... nothing changes :( Shoud someone could help me? Note that I'm using a SqlDataSource object running the statement with the select() method (and by setting the appropriate SelectCommandType = SqlDataSourceCommandType.StoredProcedure ) and I'm using the 2005 sql server express Thank in advance,(/d
View 3 Replies View RelatedI would like to search for a particular stored procedure written by a developer. I know the name of the procedure but in which db is it residing in. There are 40 databases in this SQL 2008 instance. I search on the name column in sys.all_objects table and it does not return anything. I end up querying sys.procedures on each database to locate the procedure. Is there a system table/view that I can query to look for a procedure, instead of querying sys.procedures on each database one by one?
View 1 Replies View RelatedNew to the forum here. I'm having a trouble. My company is contemplating using Report Builder as an end user tool as opposed to giving everyone a copy of Visual Studio. I'm studying the feasability on this.
A problem I'm running into, is that it doesn't seem possible to use a stored procedure as a data source. All of our standard reports are based off of stored procedures. Now granted, I'm talking about just Report Builder. I know how to base a report off of a SP using reporting services in VS. So, my question is, can you create a report off of a SP using only Report Builder, and if so, the steps? Thanks guys!
I am trying to create a trigger with in a stored procedure. When I execute the stored procedure I am getting the following error :
Msg 2108, Level 15, State 1, Procedure JPDSAD1, Line 1
Cannot create trigger on 'FRIT_MIP003_BOK_BTCH_LG.P62XB1.XB1PDS' as the target is not in the current database.
Here is the code for the stored procedure :
CREATE PROCEDURE [dbo].[InsertTRIGGER](@databaseA varchar(50))
AS
BEGIN
exec ('USE ['+@databaseA+'];')
exec ('CREATE TRIGGER [P62XB1].[JPDSAD1] ON [' + @databaseA + '].[P62XB1].[XB1PDS] ' +
'AFTER DELETE AS ' +
'BEGIN ' +
' INSERT INTO [' + @databaseA + '].[P62XB1].[XL1TDS] SELECT CAST(SYSDATETIME() AS DATETIME2(6)) , ''B'' , ''D'' , IDA_DELETE ' +
' ''0001-01-01 00:00:00.000000'' , '' '' FROM DELETED ' +
'END')
END
I am search for coding criteria I need create a stored procedure with execute as and along with encryption. How can I use the same ? My main motive is to create proc with execute as a user also at the same time I need to encrypt the same from other users seeing the code.
The below query is getting errors:
Create procedure testproc
with execute as 'user' and with encryption
as truncate table some table
I want that I will allow a user only to select data from any object and only to alter an existing stored procedure or view. That user can not drop and create any stored procedure and view.
I can assign that user db_datareader role, grant view definition but if I grant alter permission, that user can create, alter and drop any stored procedure and view.
Version 2008 R2
The stored procedure has the dependency on the table that was altered.
I have a stored procedure with several insert into statements. On occasion one of the insert into queries doesn't return any data. What is the best way to test for no records then, skip that query?
View 5 Replies View RelatedWe have a legacy database that have hundreds of stored procedures.
The previous programmar uses a string like servername.databasename.dbo.tablename in the stored procedures.
We now have migrated the database to a new server. The old server is either needed to be replaced by the new server name, or remove it.
I don't know why he used servername as part of the fully qualified name, we don't use linked servers. So I think better removing the servername in all the stored procedures.
I know I can do a generate script, and replace the text and then use alter procedure to recreate all the stored procedures. But since hundreds of them, is there a programmatically way to replace them?
Is it possible to check query execution plan of a store procedure from create script (before creating it)?
Basically the developers want to know how a newly developed procedure will perform in production environment. Now, I don't want to create it in production for just checking the execution plan. However they've provided SQL script for the procedure. Now wondering is there any way to look at the execution plan for this procedure from the script provided?
I am replicating a stored procedure execution, which builds and executes the following dynamic SQL command:
IF EXISTS (select * from MyDB..sysfiles sf (nolock) where name = 'MyDB_201201')
ALTER DATABASE [MyDB] REMOVE FILE [MyDB_201201]
IF EXISTS (select * from MyDB..sysfilegroups sfg (nolock)
where groupname = 'MyDB_201201' and sfg.groupname not in(
SELECT distinct fg.name file_group_name
[Code] ....
I can run this SP with no errors on both the publisher and the subscriber. However, when I try to replicate the execution of this SP, I get an error in replication monitor:
ALTER DATABASE statement not allowed within multi-statement transaction. (Source: MSSQLServer, Error number: 226)
How can I change my code to workaround this? Perhaps some explicit transactions?
We have a process that uses a stored procedure: sp_MysteryProcedure....
The problem I am having is: I am 95% certain the issue lies with this stored procedure, but I cannot find the process that calls this procedure. It could be a SQL Server Job that calls the procedure directly, it could be an SSIS (*.dtsx) process that calls this procedure, or some other random process.
One of the big issues is we have tons of *.dtsx packages that call a bunch of stored procedures, but it doesn't seem a normal Windows Search (Start --> Search) searches these files (or perhaps something else is going on with this search).
So my question is multi-part.....
1). How would one go about finding a rouge process that loads data via a stored procedure if we believe we know the stored procedures name?
2). How do you search *.dtsx files?
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedHello people,
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Your help is much appreciated.
Hi, i've had this query method:
34 public void AddDagVerslagCategorie(int logID, HistoriekDetail historiekDetail)35 {36 SqlConnection oConn = new SqlConnection(_connectionString);37 string strSql = "Insert into LogDetail (LogID, CategorieID, Inhoud)";38 strSql += "values(@logID, @categorieID, @inhoud)";39 SqlCommand oCmd = new SqlCommand(strSql, oConn);40 oCmd.Parameters.Add(new SqlParameter("@logID", SqlDbType.Int)).Value = logID;41 oCmd.Parameters.Add(new SqlParameter("@categorieID", SqlDbType.Int)).Value = historiekDetail.CategorieID;42 oCmd.Parameters.Add(new SqlParameter("@inhoud", SqlDbType.VarChar, 100)).Value = historiekDetail.Inhoud;43 44 try45 {46 oConn.Open();47 int rowsAffected = oCmd.ExecuteNonQuery();48 if (rowsAffected == 0) throw new ApplicationException("Fout toevoegen historiek detail");49 oCmd.CommandText = "select @@IDENTITY";50 oCmd.Parameters.Clear();51 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();52 }53 catch (Exception ex)54 {55 throw new ApplicationException("Fout toevoegen historiek detail: " + ex.Message);56 }57 finally58 {59 if (oConn.State == ConnectionState.Open) oConn.Close();60 }61 }
which i've converted to a stored procedure: 1 ALTER PROCEDURE [dbo].[insert_DagVerslagDetail]
2 -- Add the parameters for the stored procedure here
3 @dagverslagdetailID int,
4 @logID int,
5 @categorieID int,
6 @inhoud varchar(100)
7 AS
8 BEGIN
9 -- SET NOCOUNT ON added to prevent extra result sets from
10 -- interfering with SELECT statements.
11 SET NOCOUNT ON;
12 SET @dagverslagdetailID = SCOPE_IDENTITY()
13
14 -- Insert statements for procedure here
15 BEGIN TRANSACTION
16 INSERT LogDetail (LogID, CategorieID, Inhoud)
17 VALUES(@logID, @categorieID, @inhoud)
18 COMMIT TRANSACTION
19 END
Now i would like to call that stored procedure in my previous method, so i've changed it to this:
1 public void AddDagVerslagCategorie(int logID, HistoriekDetail historiekDetail)
2 {
3 SqlConnection oConn = new SqlConnection(_connectionString);
4 string strSql = "insert_DagVerslagDetail";
5 strSql += "values(@logID, @categorieID, @inhoud)";
6 SqlCommand oCmd = new SqlCommand(strSql, oConn);
7 oCmd.CommandType = CommandType.StoredProcedure;
8 oCmd.Parameters.Add(new SqlParameter("@logID", SqlDbType.Int)).Value = logID;
9 oCmd.Parameters.Add(new SqlParameter("@categorieID", SqlDbType.Int)).Value = historiekDetail.CategorieID;
10 oCmd.Parameters.Add(new SqlParameter("@inhoud", SqlDbType.VarChar, 100)).Value = historiekDetail.Inhoud;
11
12 try
13 {
14 oConn.Open();
15 int rowsAffected = oCmd.ExecuteNonQuery();
16 if (rowsAffected == 0) throw new ApplicationException("Fout toevoegen historiek detail");
17 oCmd.CommandText = "select @@IDENTITY";
18 oCmd.Parameters.Clear();
19 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();
20 }
21 catch (Exception ex)
22 {
23 throw new ApplicationException("Fout toevoegen historiek detail: " + ex.Message);
24 }
25 finally
26 {
27 if (oConn.State == ConnectionState.Open) oConn.Close();
28 }
29 }
Do i still need the lines 17 oCmd.CommandText = "select @@IDENTITY";
19 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();
Because i've declared the identity in my stored procedure
Hi, I have a stored procedure, and it is expecting an output. If I declared the passing varaible as ref, it compiles fine, but it is not returning any value. If I pass the varaible as out, and add the paramater
MyComm.Parameters.Add(new SqlParameter("@ReturnValue", returnValue)); it gives the following error.
Compiler Error Message: CS0269: Use of unassigned out parameter 'quoteID'.
And if I don't supply the previous statement, the following error occurs.
System.Data.SqlClient.SqlException: Procedure 'CreateData' expects parameter '@ReturnValue', which was not supplied.
How Can I fix this? thanks.
I have a stored procedure that calls a DTS package to grab a text file that has been uploaded to the server and merge it with a table on the database. The DTS package works woderfully in SQL, as does the the file upload. The problem arrises when I create a stored procedure to run the DTS package. I know that you have to shell out and do a command line on the SQL server (and I think that I got the syntax correct) but its calling the Stored Procedure in the ASP.NET app that is causing me hardship. Here is the code that I have so far:
Stored Procedure:
CREATE PROCEDURE spSampleData AS exec master..xp_cmdshell 'dtsrun /SZEUSsqlServer113 /NdtsPackage /UuserID /Ppassword'
GO
VB to run DTS:
Dim myCommand As SqlCommand
myCommand.CommandType = CommandType.StoredProcedure
myCommand.CommandText = "spSampleData"
myCommand.ExecuteNonQuery()
I'm not sure what I am doing wrong but any help would be great.
Thanks!
I am trying to set up a call to a Stored Procedure to do an Insert. Here is my code snippet:
<%@ Page Language="VB" %>
<%@ import Namespace="System" %>
<%@ import Namespace="System.Data.SqlClient" %>
.
.
.
Dim loConn as New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim cmdInsert as New SQLCommand("AdminUser_Insert", loConn)
cmdInsert.CommandType = CommandType.StoredProcedure
Dim InsertForm As New SqlDataAdapter()
InsertForm.InsertCommand = cmdInsert
cmdInsert.Parameters.Add(New SqlParameter("@RETURN_VALUE", SqlDbType.bigint, 8, "Account_Number"))
cmdInsert.Parameters("@RETURN_VALUE").Direction = ParameterDirection.ReturnValue
cmdInsert.Parameters.Add(New SqlParameter("@UserID", SqlDbType.varchar, 50, "UserID"))
cmdInsert.Parameters("@UserID").Value = Request("UserID")
cmdInsert.Parameters.Add(New SqlParameter("@Password", SqlDbType.varchar, 32, "Password"))
cmdInsert.Parameters("@Password").Value = Request("Password")
cmdInsert.Parameters.Add(New SqlParameter("@First_Name", SqlDbType.varchar, 32, "First_Name"))
cmdInsert.Parameters("@First_Name").Value = Request("FirstName")
cmdInsert.Parameters.Add(New SqlParameter("@Middle_Name", SqlDbType.varchar, 32, "Middle_Name"))
cmdInsert.Parameters("@Middle_Name").Value = Request("MiddleName")
cmdInsert.Parameters.Add(New SqlParameter("@Last_Name", SqlDbType.varchar, 32, "Last_Name"))
cmdInsert.Parameters("@Last_Name").Value = Request("LastName")
loConn.Open()
command.ExecuteNonQuery()
loConn.Close()
I get the following error:
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30451: Name 'CommandType' is not declared.
This error happens on the line: cmdInsert.CommandType = CommandType.StoredProcedure
Any help would be appreciated,
Greg
Hello everybody,
How can I call DTS from stored procedure, any help pls.
PS: I appreciate if you please give me an example.
Thank you....
I'm trying to call a job from a stored procedure.
To do so, I've found that sp_start_job is doing just that.
My problem is that the sp_start_job is not in my master
database stored procedures and I don't know how to add it.
I'm working with SQL Server 7 Enterprise without the SP.
Am I looking for the right thing ? (sp_start_job)
Where can I find it ?
Hey, I have a parent SP, and within that parent I want to call a a child what is the code to call that child procedure? or teh easiest way to make that happen?
View 1 Replies View Related